The following plugin provides functionality available through Pipeline-compatible steps. Read more about how to integrate steps into your Pipeline in the Steps section of the Pipeline Syntax page.

For a list of other such plugins, see the Pipeline Steps Reference page.

Build Steps from Json Plugin

step([$class: 'BuildStepsFromJsonBuilder']): Build Steps from Json

  • buildStep
      Nested Choice of Objects
    • $class: 'A3Builder'
      • project_file : String
        Absolute path to the a³ project file (.apx) containing the analysis items and configuration.
        (Note: a³ workspace files (also .apx) are not supported as input.)
      • analysis_ids : String
        The following values are allowed:
        • Comma separated list of analysis IDs. Then only the given analysis items will be executed. Note: The ID must be contained in the apx project and must adhere the analysis ID naming conventions (letters, numbers and underscores only).
        • No ID at all (i.e. empty field). Then all analysis items specified in the apx project file will be executed.
      • pedantic_level : String
      • export_a3apxworkspace : String
        Exports the status of a³ at the end of the a³ analysis build step run as a workspace .apx file. This workspace file can later be opened in an interactive run of a³. The result is that the a³ GUI then shows all messages and all results generated by the batch-mode analyses without the need to run these analyses again.
      • copy_report_file : boolean
      • copy_result_file : boolean
      • skip_a3_analysis : boolean
        This switch can be used to deactivate the a³ analysis build step. This switch provides a more convenient method to temporarily deactivate analysis runs than removing the entire build step and reconfiguring the a³ analysis run from scratch when later adding the build step again.
    • $class: 'ACSDeploymentBuilder'
      • context
          Nested Object
        • azureCredentialsId : String
          The Azure Service Principal credentials used to communicate with the Azure services. Check the following documentation for more information about the service principal:
        • resourceGroupName : String
          Resource group of the target Azure Container Service.
        • containerService : String
          The name of the Azure Container Service. Refer to the following documentation on how to setup Azure Container Service:
        • sshCredentialsId : String

          The username and private key credential used to authenticate with the ACS clusters master node. This is the private key paired with the SSH RSA public key provided when you create the ACS cluster (see Deploy a Docker container hosting solution using the Azure portal ).

          The username and key credentials can be updated from Azure Portal. Find the Virtual Machine for your ACS cluster master node from the portal, and you can update the credential from SUPPORT + TROUBLESHOOTING >>> Reset password page.

        • configFilePaths : String

          The path patterns for the specific cluster (Kubernetes, DC/OS, Docker Swarm) configurations you want to deploy, in the form of Ant glob syntax.

        • containerRegistryCredentials (optional)
          All the credentials needed for pulling images from private repositories. Specify multiple entries if your deployments need to pull images from multiple, private repositories that require authentication.
            Array / List of Nested Object
          • url : String
            URL to the Docker registry you are using. May be left blank to use the public DockerHub registry (currently https://index.docker.io/v1/).
          • credentialsId : String
        • dcosDockerCredenditalsPathShared : boolean (optional)

          Determine if the Docker credentials archive upload path specified above is shared among all the agents.

          To ease the shared files access, we may create share file storage for all the DC/OS agent nodes as this documentation (Create and mount a file share to a DC/OS cluster) suggests. With the help of the shared storage, we only need to upload the Docker credentials archive to the shared storage once, and all the agent nodes get the access to the resource immediately.

          Check this option if the Docker credentials archive upload path is a shared storage path.

        • dcosDockerCredentialsPath : String (optional)

          The path on the DC/OS cluster agent nodes to store the docker credentials archive docker.tar.gz. Only absolute path is allowed here. Environment variable substitution is enabled for the path input. Due to the limitation in the underlying Mesos fetcher used by Marathon, special characters that need URI escaping and the character set {single quote ('), back slash (\), nul (\0)}, are not allowed in the path, otherwise it will fail to load the resource before running the container.

          If not specified, the plugin will generate a path specific for the build with the following pattern.

          
          /home/<linuxAdminUser>/acs-plugin-dcos.docker/<unique-name-generated-for-the-build>

          The plugin will generate the docker credentials archive with the credentials provided, and upload the archive to the given path for all the agents. You can use it to construct the URI used in your Marathon application definition.

          
          "uris":  [
              "file://<filled-path>/docker.tar.gz"
          ]

          The URI will be exposed with the environment variable $MARATHON_DOCKER_CFG_ARCHIVE_URI. You can use this in your Marathon application definition when the "Enable Variable Substitution in Config" option is enabled. This helps when the upload path is not filled and generated by the build, or if the path changes frequently.

          Note that if an archive exists in the target path already, the build will overwrite that file.

          Reference: Marathon: Using a Private Docker Registry

        • enableConfigSubstitution : boolean (optional)
          Substitute variables (in the form $VARIABLE or ${VARIABLE}) in the configuration with values from Jenkins environment variables.

          This allows you to use dynamic values produced during the build in your Kubernetes or DC/OS configurations, e.g., a dynamically generated Docker image tag which will be used later in the deployment.

        • secretName : String (optional)
          The secret name that you can use in the Kubernetes Deployment configuration for the imagePullSecrets entry. Environment variable substitution are supported for the name input, so you can use available environment variables to construct the name dynamically, e.g., some-secret-$BUILD_NUMBER. The name should be in the pattern [a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*, i.e., dot (.) concatenated sequences of hyphen (-) separated alphanumeric words. (See Kubernetes Names)

          If left blank, the plugin will generate a name based on the build name.

          The secret name will be exposed with the environment variable $KUBERNETES_SECRET_NAME. You can use this in your Kubernetes configuration to reference the updated secret when the "Enable Variable Substitution in Config" option is enabled.

          
          apiVersion: extensions/v1beta1
          kind: Deployment
          metadata:
            name: nginx
          spec:
            replicas: 1
            template:
              metadata:
                labels:
                  app: nginx
              spec:
                containers:
                - name: nginx
                  image: some.private.registry.domain/nginx
                  ports:
                  - containerPort: 80
                imagePullSecrets:
                - name: $KUBERNETES_SECRET_NAME
          

          Note that once the secret is created, it will only be updated by the plugin. You have to manually delete it when it is not used anymore. If this is a problem, you may use fixed name so every time the job runs, the secret gets updated and no new secret is created.

        • secretNamespace : String (optional)
          The Kubernetes namespace in which the secrets will be created with the credentials configured below.
        • swarmRemoveContainersFirst : boolean (optional)
          Stop and remove containers first.
    • ACXScanBuilder
      • ncScanType : String
      • ncWebsiteId : String
      • ncProfileId : String
      • ncDoNotFail : boolean (optional)
      • acxServerURL : String (optional)
      • credentialsId : String (optional)
      • ncApiToken : Object (optional)
      • ncConfirmed : boolean (optional)
      • ncIgnoreFalsePositive : boolean (optional)
      • ncIgnoreRiskAccepted : boolean (optional)
      • ncSeverity : String (optional)
      • ncStopScan : boolean (optional)
    • cfyAzureArm
      • azureCredentialsId : String (optional)

        The ID of the credentials to use when accessing Azure. Parameters' expansion is supported when using freestyle jobs.

      • credentialsId : String (optional)

        The ID of the credentials to use when accessing Cloudify. Parameters' expansion is supported when using freestyle jobs.

      • debugOutput : boolean (optional)
        If checked, then printed Cloudify events and logs will include debug-level records.
      • deploymentId : String (optional)
      • echoEnvData : boolean (optional)

        If checked, then the created environment's data will be printed to the job's log.

      • echoInputs : boolean (optional)
        If checked, then the Cloudify deployment inputs are echoed to the Jenkins log.
      • envDataLocation : String (optional)

        Path to a file that will contain the created environment's data. If not provided, the environment data won't be written.

      • location : String (optional)

        The Azure location where the created resource group should reside in. If omitted, the value of the azure_default_location Cloudify secret will be used.

      • parameters (optional)

        YAML/JSON of parameters to pass to the template.

        • Type: java.util.Map<java.lang.String, java.lang.Object>
      • parametersAsString : String (optional)
      • parametersFile : String (optional)

        Path, relative to the Jenkins workspace root, of a YAML/JSON file containing parmaeters to pass to the template.

      • resourceGroupName : String (optional)

        Name of resource group to create for the template.

      • templateFile : String (optional)

        Workspace-relative path of the ARM template file.

      • tenant : String (optional)
    • $class: 'AWSEBBuilder'
      • extensions
          Array / List of Nested Object
        • awsRegion
          AWS Region (e.g. us-east-1) This will be the default if no valid environments are provided in the Regions field.
          • Values: GovCloud, US_GOV_EAST_1, US_EAST_1, US_EAST_2, US_WEST_1, US_WEST_2, EU_WEST_1, EU_WEST_2, EU_WEST_3, EU_CENTRAL_1, EU_NORTH_1, EU_SOUTH_1, AP_EAST_1, AP_SOUTH_1, AP_SOUTHEAST_1, AP_SOUTHEAST_2, AP_SOUTHEAST_3, AP_NORTHEAST_1, AP_NORTHEAST_2, AP_NORTHEAST_3, SA_EAST_1, CN_NORTH_1, CN_NORTHWEST_1, CA_CENTRAL_1, ME_SOUTH_1, AF_SOUTH_1, US_ISO_EAST_1, US_ISOB_EAST_1, US_ISO_WEST_1
        • awsRegionText : String
          AWS Region (e.g. us-east-1) Needs to match an environment name. If one is missing, write an issue so we can update the aws sdk.
        • credentialsString : String
        • credentialsText : String
          Use a credentials name that will be resolved during the build.
        • applicationName : String
          AWS EB Application Name (e.g.: "myapp")
        • versionLabelFormat : String
          How to set the version label? For instance, for "${GIT_COMMIT}-${BUILD_TAG}", and with "Key Prefix" set to "myapp/builds/myapp-prod-env/", the S3 Object Key is set to myapp/builds/myapp-prod-env/4b5f7669b3376a1ce504bf7ef8bf7aeee9d21746-myjob-41.zip and the version Label will be 4b5f7669b3376a1ce504bf7ef8bf7aeee9d21746-myjob-41 on AWS EB Application Versions
        • versionDescriptionFormat : String
          Sets the description of the version to be published. Jenkins environment variables are supported such as ${GIT_BRANCH} - ${BUILD_TAG}
        • failOnError : boolean
          If any of the environments fail to update, or if there are no matching environments then fail the build.
        • extensions
            Array / List of Nested Choice of Objects
          • $class: 'AWSEBElasticBeanstalkSetup'
          • $class: 'AWSEBS3Setup'
            • bucketName : String
              S3 Bucket Name to Upload to (e.g. "my-awseb-apps")
            • bucketRegion : String
              S3 Bucket Region (e.g. us-east-1) This will be the same region set for the Elastic Beanstalk application if none is specified.
            • keyPrefix : String
              Prefix for newly created apps on S3 Bucket. For Example, myapp/builds/myapp-prod-env/
            • rootObject : String

              Root Path to Grab for Artifacts, like '.' or 'target/myapp/'.

              It could be either a path to a zip file or a directory.

              If its a directory, includes and excludes are used to build the zip file

            • includes : String
              Optional (if rootObject points to a directory): Glob for Zip Includes, comma-separated like 'target/file,target/myapp/**/*'
            • excludes : String
              Optional (if rootObject points to a directory): Glob for Zip Excludes, comma-separated eg '**/.git/**/*,**/node_modules/**/*'
            • overwriteExistingFile : boolean
            • useTransferAcceleration : boolean
              If enabled on the bucket, uses transfer acceleration to upload artifacts quicker. This may incur additional AWS costs.
          • $class: 'ByName'
            • envNameList : String
              Optional: Newline separated list of AWS EB Environment Names for the Application (e.g.: "myapp-prod-env").
              When set and Environment Name exists, it will trigger a UpdateEnvironment Call when the Application Version is created.
              If not set, then all environments under the Application will be updated together.
          • $class: 'ByUrl'
            • urlList : String
              Optional: Newline separated list of AWS EB Environment url, or CNAMEs for the Application (e.g.: "myapp-prod-env.elasticbeanstalk.com").
              When set and Environment Name exists, it will trigger a UpdateEnvironment Call when the Application Version is created.
              If not set, then all environments under the Application will be updated together.
        • envLookup
            Array / List of Nested Choice of Objects
          • $class: 'AWSEBElasticBeanstalkSetup'
          • $class: 'AWSEBS3Setup'
            • bucketName : String
              S3 Bucket Name to Upload to (e.g. "my-awseb-apps")
            • bucketRegion : String
              S3 Bucket Region (e.g. us-east-1) This will be the same region set for the Elastic Beanstalk application if none is specified.
            • keyPrefix : String
              Prefix for newly created apps on S3 Bucket. For Example, myapp/builds/myapp-prod-env/
            • rootObject : String

              Root Path to Grab for Artifacts, like '.' or 'target/myapp/'.

              It could be either a path to a zip file or a directory.

              If its a directory, includes and excludes are used to build the zip file

            • includes : String
              Optional (if rootObject points to a directory): Glob for Zip Includes, comma-separated like 'target/file,target/myapp/**/*'
            • excludes : String
              Optional (if rootObject points to a directory): Glob for Zip Excludes, comma-separated eg '**/.git/**/*,**/node_modules/**/*'
            • overwriteExistingFile : boolean
            • useTransferAcceleration : boolean
              If enabled on the bucket, uses transfer acceleration to upload artifacts quicker. This may incur additional AWS costs.
          • $class: 'ByName'
            • envNameList : String
              Optional: Newline separated list of AWS EB Environment Names for the Application (e.g.: "myapp-prod-env").
              When set and Environment Name exists, it will trigger a UpdateEnvironment Call when the Application Version is created.
              If not set, then all environments under the Application will be updated together.
          • $class: 'ByUrl'
            • urlList : String
              Optional: Newline separated list of AWS EB Environment url, or CNAMEs for the Application (e.g.: "myapp-prod-env.elasticbeanstalk.com").
              When set and Environment Name exists, it will trigger a UpdateEnvironment Call when the Application Version is created.
              If not set, then all environments under the Application will be updated together.
    • $class: 'AWSEBDeploymentBuilder'
      • config
        • Type: class br.com.ingenieux.jenkins.plugins.awsebdeployment.AWSEBDeploymentConfig
      • applicationName : String (optional)
        AWS EB Application Name (e.g.: "myapp")
      • awsRegion : String (optional)
        AWS Region (e.g. us-east-1)
      • bucketName : String (optional)

        S3 Bucket Name to Upload to (e.g. "my-awseb-apps")

        (Optional, will call createStorageLocation if blank)

      • checkHealth : boolean (optional)
        Uncheck this to disable the Health check on deploy. Some implementations may not care to wait until the environment shows "Green".
      • credentialId : String (optional)
        Select the credentials to use.
      • environmentName : String (optional)

        Optional: AWS EB Environment name(s) to deploy to.

        Can accept single or multiple comma-separated values. Examples:

        • "my-prod-env" (single environment)
        • "my-dev-env,my-staging-env" (multiple environments)

        When this value is set and each requested environment exists, an UpdateEnvironment call will be triggered as the Application Version is created.

      • excludes : String (optional)
        Optional (if rootObject points to a directory): Glob for Zip Excludes, comma-separated eg '**/.git/**/*,**/node_modules/**/*'
      • includes : String (optional)
        Optional (if rootObject points to a directory): Glob for Zip Includes, comma-separated like 'target/file,target/myapp/**/*'
      • keyPrefix : String (optional)
        Prefix for newly created apps on S3 Bucket. For Example, myapp/builds/myapp-prod-env/
      • maxAttempts : int (optional)
      • rootObject : String (optional)

        Workspace-relative path of the artifact file to upload (if it's a file), or if it's a directory, the base directory to build the zip/war against

        Examples:

        • File, like target/mywebapp.war: The war file will be uploaded
        • A Directory, like '.' or 'target/war': A Zip file will be built and uploaded instead (using includes and excludes).
      • skipEnvironmentUpdates : boolean (optional)
      • sleepTime : int (optional)
      • versionDescriptionFormat : String (optional)
        How to set the version description? For instance, for "${GIT_COMMIT}", the version Description will be 4b5f7669b3376a1ce504bf7ef8bf7aeee9d21746 on AWS EB Application Versions
      • versionLabelFormat : String (optional)
        How to set the version label? For instance, for "${GIT_COMMIT}-${BUILD_TAG}", and with "Key Prefix" set to "myapp/builds/myapp-prod-env/", the S3 Object Key is set to myapp/builds/myapp-prod-env/4b5f7669b3376a1ce504bf7ef8bf7aeee9d21746-myjob-41.zip and the version Label will be 4b5f7669b3376a1ce504bf7ef8bf7aeee9d21746-myjob-41 on AWS EB Application Versions
      • zeroDowntime : boolean (optional)
    • awsebReleaser
      • credentialId : String
        Select the credentials to use.
      • awsRegion : String
        AWS Region.
      • applicationName : String
        AWS EB Application Name (e.g.: "myapp").
      • environmentId : String
        AWS EB Environment name to deploy to.
      • versionLabel : String
    • abapCi
      • abapPackagename : String (optional)
      • atcVariant : String (optional)
      • sapSystemLabel : String (optional)
      • runAtcChecks : boolean (optional)
      • runUnitTests : boolean (optional)
      • treatWarningAtcChecksAsErrors : boolean (optional)
      • useJenkinsProjectName : boolean (optional)
      • withCoverage : boolean (optional)
    • $class: 'ActionHubPlugin'
      • snActivatePlugin
        • credentialsId : String (optional)
          User name and password defined in global credentials (credentials ID is required here).
          This field cannot be empty. It doesn't use global settings from ServiceNow Parameters.
        • apiVersion : String (optional)
          Optional. Version of the endpoint to access. For example, v1 or v2. Only specify this value to use an endpoint version other than the latest.
        • pluginId : String (optional)
          Unique identifier of the plugin. You can locate this identifier on the Plugins page within the card of the desired plugin; identified with the name "ID".
        • url : String (optional)
          ServiceNow instance url. This field cannot be empty. It doesn't use global settings from ServiceNow Parameters.
      • $class: 'AddComment'
        • prefix : String
          Enter the syntax. Example: P1#I10 (P3 - Project ID, I10 - Item ID). You can only add a comment up to 10 items.
        • note : String
          Any malicious content will be automatically removed.
        • logfile : String
          Upload the build log file as an attachment.
      • $class: 'AddTestToSetStep'
        • domain : String
          HP ALM Domain
        • project : String
          HP ALM Project name
        • testPlanPath : String
          Path to a test or test folder in HP ALM which shall be added to a test set
        • testSetPath : String
          Path to a test set in HP ALM into which test(s) shall be added
      • $class: 'AmxEclipseAntBuilder'
        • targets : String
          Specify a list of Ant targets to be invoked over Tibco amx_eclipse_ant wrapper, or leave it empty to invoke the default Ant target specified in the build script. Additionally, you can also use this field to specify other Ant options.
        • name : String
          For projects that need to use TIBCO amx_eclipse_ant wrapper as the build system. This causes Jenkins to invoke amx_eclipse_ant with the given targets and options. Any non-zero exit code causes Jenkins to mark the build as a failure.

          Jenkins supplies some environment variables that can be used from within the build script.

        • antOpts : String
          If your build requires a custom ANT_OPTS, specify it here. Please refer to TIBCO Documentation for any detail
        • buildFile : String
          If your build requires a custom -buildfile, specify it here. By default amx_eclipse_ant will use the build.xml in the root directory; this option can be used to use build files with a different name or in a subdirectory. Please refer to TIBCO Documentation for any detail
        • properties : String
          Properties needed by your ant build can be specified here (in standard properties file format):
          # comment
          name1=value1
          name2=$VAR2
          
          These are passed to amx_eclipse_ant like "-Dname1=value1 -Dname2=value2". Always use $VAR style (even on Windows) for references to Jenkins-defined environment variables. On Windows, %VAR% style references may be used for environment variables that exist outside of Jenkins. Backslashes are used for escaping, so use \\ for a single backslash. Double quotes (") should be avoided, as amx_eclipse_ant on *nix wraps parameters in quotes quotes and runs them through eval, and Windows has its own issues with escaping.. in either case, use of quotes may result in build failure. To define an empty property, simply write varname= Please refer to TIBCO Documentation for any detail
        • amxEclipseAntTra : String
          If your build requires a custom TRA properties file, specify it here. Please refer to TIBCO Documentation for any detail.
        • businessStudioWs : String
          If your build requires a custom Business Studio workspace to use, specify it here. By default amx_eclipse_ant use user home as location for "workspace"" creation. this option force amx_eclipse_ant to use a custom workspace by flag "-data 'your-custom-ws'" Please refer to TIBCO Documentation for any detail.
      • anchore
        • name : String
          Name of the file that contains a list of container images for anchore to analyze, evaluate policy, and run queries against. The format for each line is "imageId /path/to/Dockerfile", where the Dockerfile is optional. This file must be made available (created by a prior step) to Anchore Container Image Scanner plugin.
        • annotations (optional)
            Array / List of Nested Object
          • key : String
          • value : String
        • autoSubscribeTagUpdates : boolean (optional)
          If selected or set to 'true', the Anchore Container Image Scanner step will instruct Anchore Engine to automatically begin watching the added tag for updates from registry. Default value: 'true'
        • bailOnFail : boolean (optional)
          If selected or set to 'true', the Anchore Container Image Scanner step will cause the build to fail if the policy evaluation result is FAIL. Default value: 'true'
        • bailOnPluginFail : boolean (optional)
          If selected or set to 'true', the Anchore Container Image Scanner step will cause the build to fail if the plugin encounters an error. Default value: 'true'
        • engineCredentialsId : String (optional)
        • engineRetries : String (optional)
          Number of polling attempts spaced at 5 second intervals spent waiting for the Anchore Engine operation to complete.
        • engineurl : String (optional)
          Anchore Engine URL
        • engineverify : boolean (optional)
        • forceAnalyze : boolean (optional)
          If selected or set to 'true', the Anchore Container Image Scanner step will instruct Anchore Engine to force analyze the image. Default value: 'false'
        • policyBundleId : String (optional)
          ID of the policy bundle on Anchore Engine to be used for policy evaluations. If empty, the policy bundle marked active on Anchore Engine will be used by default.
      • $class: 'AnsibleAdHocCommandBuilder'
        • hostPattern : String
          The host or set of hosts on which the command will be executed. For more details see the ansible documentation for Patterns.
        • inventory
            Nested Choice of Objects
          • $class: 'InventoryContent'
            • content : String
            • dynamic : boolean
              Check this box if a dynamic inventory is used. For more details see the ansible documentation for Dynamic Inventory
          • $class: 'InventoryDoNotSpecify'
            • $class: 'InventoryPath'
              • path : String
                Specify the inventory host path or a comma separated host list
          • module : String
            Module name to execute. The shell module is used when left empty.
          • command : String
            Module arguments or shell command to execute
          • additionalParameters : String (optional)
            Any additional parameters to pass to the ansible command.

            Warning:

            The content of this textbox will be passed as is to the command line.
          • ansibleName : String (optional)
          • becomeUser : String (optional)
            Desired become user. "root" is used when this field is empty.
          • colorizedOutput : boolean (optional)
            Check this box to allow ansible to render ANSI color codes in the Jenkins console. This option works well with the Jenkins AnsiColor plugin.
          • credentialsId : String (optional)
            Select the credentials for the SSH connections. Only private key authentication is supported.
          • disableHostKeyChecking : boolean (optional)
            Check this box if you really want to disable the validation of the hosts SSH server keys.
          • extraVars (optional)
              Array / List of Nested Object
            • hidden : boolean (optional)
            • key : String (optional)
            • value : String (optional)
          • forks : int (optional)
            Specify number of parallel processes to use. Set to 0 to use the default value.
          • hostKeyChecking : boolean (optional)
          • sudo : boolean (optional)
            Run operations with sudo. It works only when the remote user is sudoer with nopasswd option. Sudo has been deprecated in favor of become and will be removed in Ansible 2.6.
          • sudoUser : String (optional)
            Desired sudo user. "root" is used when this field is empty. Sudo has been deprecated in favor of become and will be removed in Ansible 2.6.
          • unbufferedOutput : boolean (optional)
            Skip standard output buffering for the ansible process. The ansible output is directly rendered into the Jenkins console. This option can be usefull for long running operations.
          • vaultCredentialsId : String (optional)
            Select the credentials for vault encrypted vars. Only secret file and secret text are supported.
        • cfyAnsible
          • additionalArgs : String (optional)
          • ansibleEnvVars : String (optional)
          • credentialsId : String (optional)

            The ID of the credentials to use when accessing Cloudify. Parameters' expansion is supported when using freestyle jobs.

          • debugLevel : int (optional)
          • debugOutput : boolean (optional)
          • deploymentId : String (optional)
          • echoEnvData : boolean (optional)
          • echoInputs : boolean (optional)
            If checked, then the Cloudify deployment inputs are echoed to the Jenkins log.
          • envDataLocation : String (optional)
          • optionsConfig : String (optional)
          • playbookPath : String (optional)
          • remergeSources : boolean (optional)
          • runData : String (optional)
          • savePlaybook : boolean (optional)
          • scpExtraArgs : String (optional)
          • sensitiveKeys : String (optional)
          • sftpExtraArgs : String (optional)
          • sourcePath : String (optional)
          • sources : String (optional)
          • sshCommonArgs : String (optional)
          • sshExtraArgs : String (optional)
          • startAtTask : String (optional)
          • tenant : String (optional)
          • timeout : int (optional)
        • $class: 'AnsiblePlaybookBuilder'
          • playbook : String
            Path to the ansible playbook file. The path can be absolute or relative to the job workspace.
          • inventory
              Nested Choice of Objects
            • $class: 'InventoryContent'
              • content : String
              • dynamic : boolean
                Check this box if a dynamic inventory is used. For more details see the ansible documentation for Dynamic Inventory
            • $class: 'InventoryDoNotSpecify'
              • $class: 'InventoryPath'
                • path : String
                  Specify the inventory host path or a comma separated host list
            • additionalParameters : String (optional)
              Any additional parameters to pass to the ansible command.

              Warning:

              The content of this textbox will be passed as is to the command line.
            • ansibleName : String (optional)
            • becomeUser : String (optional)
              Desired become user. "root" is used when this field is empty.
            • colorizedOutput : boolean (optional)
              Check this box to allow ansible to render ANSI color codes in the Jenkins console. This option works well with the Jenkins AnsiColor plugin.
            • credentialsId : String (optional)
              Select the credentials for the SSH connections. Only private key authentication is supported.
            • disableHostKeyChecking : boolean (optional)
              Check this box if you really want to disable the validation of the hosts SSH server keys.
            • extraVars (optional)
                Array / List of Nested Object
              • hidden : boolean (optional)
              • key : String (optional)
              • value : String (optional)
            • forks : int (optional)
              Specify number of parallel processes to use. Set to 0 to use the default value.
            • hostKeyChecking : boolean (optional)
            • limit : String (optional)
              Further limit selected hosts to an additional pattern.
            • skippedTags : String (optional)
              only run plays and tasks whose tags do not match these values.
            • startAtTask : String (optional)
              Start the playbook at the task matching this name.
            • sudo : boolean (optional)
              Run operations with sudo. It works only when the remote user is sudoer with nopasswd option. Sudo has been deprecated in favor of become and will be removed in Ansible 2.6.
            • sudoUser : String (optional)
              Desired sudo user. "root" is used when this field is empty. Sudo has been deprecated in favor of become and will be removed in Ansible 2.6.
            • tags : String (optional)
              Only run plays and tasks tagged with these values.
            • unbufferedOutput : boolean (optional)
              Skip standard output buffering for the ansible process. The ansible output is directly rendered into the Jenkins console. This option can be usefull for long running operations.
            • vaultCredentialsId : String (optional)
              Select the credentials for vault encrypted vars. Only secret file and secret text are supported.
          • $class: 'AnsibleTower'
            • towerServer : String (optional)
            • jobTemplate : String (optional)
            • towerCredentialsId : String (optional)
            • jobType : String (optional)
            • extraVars : String (optional)
            • jobTags : String (optional)
            • skipJobTags : String (optional)
            • limit : String (optional)
            • inventory : String (optional)
            • credential : String (optional)
            • scmBranch : String (optional)
            • verbose : boolean (optional)
            • importTowerLogs : String (optional)
            • removeColor : boolean (optional)
            • templateType : String (optional)
            • importWorkflowChildLogs : boolean (optional)
          • $class: 'AnsibleTowerProjectRevisionFreestyle'
            • towerServer : String (optional)
            • towerCredentialsId : String (optional)
            • project : String (optional)
            • revision : String (optional)
            • verbose : boolean (optional)
            • throwExceptionWhenFail : boolean (optional)
          • $class: 'AnsibleTowerProjectSyncFreestyle'
            • towerServer : String (optional)
            • towerCredentialsId : String (optional)
            • project : String (optional)
            • verbose : boolean (optional)
            • importTowerLogs : boolean (optional)
            • removeColor : boolean (optional)
          • $class: 'AnsibleVaultBuilder'
            • action : String (optional)
              Desired vault action.
            • ansibleName : String (optional)
            • content : String (optional)
              Desired encrypted content.
            • input : String (optional)
              Desired input file to encrypt.
            • newVaultCredentialsId : String (optional)
              Select the credentials for rekeying vault encrypted files. Only Jenkins secret file and secret text are supported.
            • output : String (optional)
              Desired output file for encrypted content.
            • vaultCredentialsId : String (optional)
              Select the credentials for vault encrypted vars. Only Jenkins secret file and secret text are supported.
          • ant
            For projects that use Ant as the build system. This causes Jenkins to invoke Ant with the given targets and options. Any non-zero exit code causes Jenkins to mark the build as a failure.

            Jenkins supplies some environment variables that can be used from within the build script.

            • targets : String
              Specify a list of Ant targets to be invoked (separated by spaces), or leave it empty to invoke the default Ant target specified in the build script. Additionally, you can also use this field to specify other Ant options.
            • antName : String
            • antOpts : String
              If your build requires a custom ANT_OPTS, specify it here. Typically this may be used to specify java memory limits to use, for example -Xmx512m. Note that other Ant options (such as -lib) should go to the "Ant targets" field.
            • buildFile : String
              If your build requires a custom -buildfile, specify it here. By default Ant will use the build.xml in the root directory; this option can be used to use build files with a different name or in a subdirectory.
            • properties : String
              Properties needed by your ant build can be specified here (in standard properties file format):
              # comment
              name1=value1
              name2=$VAR2
              
              These are passed to Ant like "-Dname1=value1 -Dname2=value2". Always use $VAR style (even on Windows) for references to Jenkins-defined environment variables. On Windows, %VAR% style references may be used for environment variables that exist outside of Jenkins. Backslashes are used for escaping, so use \\ for a single backslash. Double quotes (") should be avoided, as ant on *nix wraps parameters in quotes and runs them through eval, and Windows has its own issues with escaping. In either case, use of quotes may result in build failure. To define an empty property, simply write varname=
          • $class: 'AntExec'
            • scriptSource : String
              Runs entered Apache Ant tasks as a build file with only one target, untill you write code into the "Extended script source", but the target created from this code will always be the default target of the created build file.

              The script will run with WORKSPACE as the current directory. Build will be considered as failure if any Ant task fails. You can use Ant-Contrib tasks (if it is enabled in global configuration). You need to use namespace "antcontrib" (example: "<antcontrib:if>").
            • extendedScriptSource : String
              Into this field you can enter a code, you could not able to enter into the previous field, as it should not appear within the Ant target. The entries can be other targets, import/include tasks etc. With this extension you are able to create more complex Ant build file with just one limitation - the first field (textarea) must always be used for default Ant target. This field is optional.
            • scriptName : String
              Here you can enter the name for your new script. The name will be also used for default Ant target. This build file will then have a name that differs from the default name, so it will not be overwritten by the upcoming build step and therefore it might be used repeatedly, or it can be included/imported.
            • properties : String
              Properties needed by your ant build can be specified here (in standard properties file format):
              # comment
              name1=value1
              name2=$VAR2
              
              These are passed to Ant like "-Dname1=value1 -Dname2=value2". Always use $VAR style (even on Windows) for references to Jenkins-defined environment variables. On Windows, %VAR% style references may be used for environment variables that exist outside of Jenkins. Backslashes are used for escaping, so use \\ for a single backslash. Double quotes (") should be avoided, as ant on *nix wraps parameters in quotes quotes and runs them through eval, and Windows has its own issues with escaping.. in either case, use of quotes may result in build failure. To define an empty property, simply write varname=
            • antName : String
            • antOpts : String
              If your build requires a custom ANT_OPTS, specify it here. Typically this may be used to specify java memory limits to use, for example -Xmx512m.
              Note that other Ant options (such as -lib) should not be here.
            • keepBuildfile : boolean
            • verbose : boolean
            • emacs : boolean
            • noAntcontrib : boolean

              Disabling usage of Ant-Contrib Tasks in this build step.

          • antws
            For projects that use Ant as the build system. This causes Jenkins to invoke Ant with the given targets and options. Any non-zero exit code causes Jenkins to mark the build as a failure.

            Jenkins supplies some environment variables that can be used from within the build script.

            • targets : String
              Specify a list of Ant targets to be invoked (separated by spaces), or leave it empty to invoke the default Ant target specified in the build script. Additionally, you can also use this field to specify other Ant options.
            • antName : String
            • antOpts : String
              If your build requires a custom ANT_OPTS, specify it here. Typically this may be used to specify java memory limits to use, for example -Xmx512m. Note that other Ant options (such as -lib) should go to the "Ant targets" field.
            • buildFile : String
              If your build requires a custom -buildfile, specify it here. By default Ant will use the build.xml in the root directory; this option can be used to use build files with a different name or in a subdirectory.
            • properties : String
              Properties needed by your ant build can be specified here (in standard properties file format):
              # comment
              name1=value1
              name2=$VAR2
              
              These are passed to Ant like "-Dname1=value1 -Dname2=value2". Always use $VAR style (even on Windows) for references to Jenkins-defined environment variables. On Windows, %VAR% style references may be used for environment variables that exist outside of Jenkins. Backslashes are used for escaping, so use \\ for a single backslash. Double quotes (") should be avoided, as ant on *nix wraps parameters in quotes and runs them through eval, and Windows has its own issues with escaping. In either case, use of quotes may result in build failure. To define an empty property, simply write varname=
          • $class: 'ApiFortressBuilder'
            • mode : String
              When running in single test mode, once specific test will run. When running in automatch mode, a collection of tests will run.
            • hook : String
              The API Hook URL.
              API Hooks are unique urls connected to projects. They provide access to API Fortress automation API and will allow you to run tests.
              You can create one in the API Fortress Company dashboard.
            • id : String

              Test ID

              When running in Single Test mode, you have to provide the ID of the test you want to run. You can find this information in the interstitial page of the test.

              Automatch URL

              When running in Automatch mode, introduce here the URL of the resource that you are willing to test.

              Tag

              When running in tag mode, introduce the tag of the tests you want to run.

              Project

              When running in project mode, no value is required.
            • blocking : boolean
              Set this flag is a test failure must determine a build failure.
            • dryrun : boolean
              Set this flag if you don't want the event to be stored in API Fortress.
            • silent : boolean
              Set this flag if a failure should not generate API Fortress alerts.
            • param1name : String
            • param1value : String
            • param2name : String
            • param2value : String
            • param3name : String
            • param3value : String
          • appray
            • appRayUrl : String
              App-Ray instance URL. Default: https://demo.app-ray.co
            • outputFilePath : String
              Name of the binary file (apk, ipa) to be scanned relative to the workspace. You can use Jenkins variables to specify the filename.
            • waitTimeout : int
              Timeout of waiting for ending of a scan. (For big application sometimes it take more than 30 minute!)
            • riskScoreThreshold : int
              The minimum risk score to check the apk validity. It is the output of then scan. You can check the scores on the app-ray instance.
            • credentialsId : String
              Use email address as a username and please provide a password. The user must have full-access access right in App-Ray in order to be able to submit applications for scanning.
          • appscan
            • scanner
                Nested Choice of Objects
              • dynamic_analyzer
                • target : String
                • hasOptions : boolean
                • extraField : String (optional)
                • loginPassword : String (optional)
                • loginType : String (optional)
                • loginUser : String (optional)
                • optimization : String (optional)
                • presenceId : String (optional)
                • scanFile : String (optional)
                • scanType : String (optional)
                • trafficFile : String (optional)
              • static_analyzer
                • target : String
                • hasOptions : boolean
                • openSourceOnly : boolean (optional)
            • name : String
            • type : String
            • application : String
            • credentials : String
            • email : boolean (optional)
            • failBuild : boolean (optional)
            • failBuildNonCompliance : boolean (optional)
            • failureConditions (optional)
                Array / List of Nested Object
              • failureType : String
              • threshold : int
            • intervention : boolean (optional)
            • target : String (optional)
            • wait : boolean (optional)
          • appscanenterprise
            • credentials : String
            • folder : String
            • testPolicy : String
            • template : String
            • jobName : String
            • accessId : String (optional)
            • agent : String (optional)
            • application : String (optional)
            • email : boolean (optional)
            • exploreData : String (optional)
            • failBuild : boolean (optional)
            • failureConditions (optional)
                Array / List of Nested Object
              • failureType : String
              • threshold : int
            • loginType : String (optional)
            • scanType : String (optional)
            • secretKey : String (optional)
            • target : String (optional)
            • testOptimization : String (optional)
            • trafficFile : String (optional)
            • wait : boolean (optional)
          • $class: 'AppScanSourceBuilder'
            • disableScan : boolean
            • applicationFile : String
            • acceptSSL : boolean
            • customScanWorkspace : String

              This value will be passed to AppScan Source as the scan workspace. AppScan Source assessment and working files will be stored in this directory.

              If this field is blank, the default scan directory will be used.

              The default directory is this job's build folder, as defined by Jenkins.

            • installation : String (optional)
          • $class: 'AppScanStandardBuilder'
            • startingURL : String
              Insert the URL that you want AppScan Standard to start scanning from.

              Spiders will find the remaining URLs in the domain to be included for scanning.

            • installation : String
            • additionalCommands : String (optional)
              Provide additional and optional commands to run on AppScan Standard CLI.
              AppScanCMD exec|ex|e
              
                      Parameters:
                      [ /dest_scan|/dest|/d  ]
                      [ /base_scan|/base|/b  ]
                      [ /old_host|/ohost|/oh  ]
                      [ /new_host|/nhost|/nh  ]
                      [ /scan_template|/stemplate|/st  ]
                      [ /login_file|/lfile|/lf  ]
                      [ /multi_step_file|/mstepfile|/mf  ]
                      [ /manual_explore_file|/mexplorefile|/mef  ]
                      [ /policy_file|/pfile|/pf  ]
                      [ /additional_domains|/adomains|/ad  ]
                      [ /report_file|/rf  ]
                      [ /report_type|/rt  {xml} ]
                      [ /min_severity|/msev  {informational} ]
                      [ /test_type|/tt  ]
                      [ /report_template|/rtemplate|/rtm  {CliDefault} ]
              
                      Flags:
                      [ /verbose|/v {false} ]
                      [ /scan_log|/sl {false} ]
                      [ /explore_only|/eo {false} ]
                      [ /test_only|/to {false} ]
                      [ /multi_step|/mstep|/ms {false} ]
                      [ /continue|/c {false} ]
                      [ /merge_manual_explore_requests|/mmer {false} ]
                      [ /include_responses|/ir {false} ]
                      [ /open_proxy|/oprxy|/opr /listening_port|/lport|/lp  ]
              
                      Creates new scan with base_scan's configuration
                  saving dest_scan and creating report, if configured.
              
              AppScanCMD report|rep|r
              
                      Parametrs:
                      /base_scan|/base|/b
                      /report_file|/rf
                      /report_type|/rt
                      [ /min_severity|/msev  {informational} ]
                      [ /test_type|/tt  ]
                      [ /report_template|/rtemplate|/rtm  {CliDefault} ]
              
                      Flags:
                      [ /verbose|/v {false} ]
              
                      Creates a report for base_scan.
              
              AppScanCMD close_proxy|cprxy|cpr
              
                      Closes AppScan proxy if was previously opened.
              
              More info. at:
              (9.0.3.2 User Guide) CLI - Chapter 15 - CLI - Page 315
              http://www-01.ibm.com/support/docview.wss?uid=swg27048015#2
              
              
            • authScan : boolean (optional)
              Checking this option will allow AppScan Stardard to spider and scan a website using authentication, optimizing the results obtained in the report.

              If the website contains private information accessed only by logging in this option should be checked and credentials provided to increase dynamic security coverage.

            • authScanPw : String (optional)
              Provide the password corresponding to the account's user name inserted above.

              Providing an account with higher authorization (such as Administrator) will increase the attack surface and therefore the scan coverage.

            • authScanRadio : boolean (optional)
              Check "Recorded Login Sequence" if you have one for the website, this is, for the majority of the cases, the most reliable option for authenticated scanning.

              A login sequence may be recorded using AppScan Standard's GUI by following these steps:

              "Scan" > "Scan Configuration" > "Login Management" > "Record" > [ record your login...] > "I am logged in to the site" > "Details" (Tab) > "Export" (small icon on the right side).

              Check "Form Based Authentication" if you do not have a recorded login sequence, this option will require an user name and password combination and is not guaranteed to work for all scenarios.

            • authScanUser : String (optional)
              Provide the user name of an account with access to the private functionalities of the website.

              Providing an account with higher authorization (such as Administrator) will increase the attack surface and therefore the scan coverage.

            • generateReport : boolean (optional)
              Check this option if you want AppScan Standard to generate a report after scannning.

              The report is available in HTML and PDF.

              The HTML report generated is ready to be integrated with the HTML Publisher Plugin.

            • htmlReport : boolean (optional)
              This report can be integrated with the HTML Publisher Plugin.
            • includeURLS : String (optional)
              This is used to include URLs for scanning,

              Some URLs might not be found by AppScan Standard's spiders, include them to get the best possible coverage.

            • pathRecordedLoginSequence : String (optional)
              Provide the full path to the recorded login sequence file (.login). More info. at: (9.0.3.2 User Guide) Login Management view - Chapter 4 - Configuring - Page 45 http://www-01.ibm.com/support/docview.wss?uid=swg27048015#2
            • pdfReport : boolean (optional)
              A PDF report is generated.
            • policyFile : String (optional)
              Provide the Path to a Test Policy File (.policy) to determine which type of flaws to scan for.

              A Test Policy File can be created following these steps:

              "Scan" > "Scan Configuration" > "Test Policy" > "Export".

            • reportName : String (optional)
              Provide the name to save the report with.

              To configure HTML Publisher Plugin properly, the names in the configuration must match.

            • verbose : boolean (optional)
              Selecting this option will enable AppScan Standards' verbose, printing the full scan output in Jenkins log.
          • xooa
            • name : String
              Xooa Jenkins
            • appId : String
          • $class: 'AppUploaderBuilder'
            • buildFilePath : String
              Please specify the absolute path or relative to the app(.apk or .ipa) file to be uploaded.
              The app_url of the uploaded app can be accessed from the environment variable BROWSERSTACK_APP_ID.
          • applatix
            • axUrl : String
              The URL of Applatix system. For example: https://applatix.yourcompany.com
            • axUsername : String
              Applatix credential: username
            • axPassword : String
              Applatix credential: password
            • axServiceTemplateName : String
            • axServiceTemplateRepository : String
              The repository where your Service Template is.
            • axServiceTemplateBranch : String
              The branch where your Service Template is.
            • axServiceTemplateParameters
              The parameters of your Service Template at Applatix system. It is optional. It is in JSON format, for example: {"service": "service_name", "iterations": 3 }
                Array / List of Nested Object
              • key : String
              • value : String
          • snApplyChanges
            • credentialsId : String (optional)
              User name and password defined in global credentials (credentials ID is required here) used for the instance (usually where the application will be published).
            • apiVersion : String (optional)
              Optional. Version of the endpoint to access. For example, v1 or v2. Only specify this value to use an endpoint version other than the latest.
            • appScope : String (optional)
              Required if application system ID is not specified. The scope name of the application for which to apply the changes, such as x_aah_custom_app. You can locate this value in the scope field in the Custom Application [sys_app] table.
            • appSysId : String (optional)
              Required if application scope is not specified. The system id of the application for which to apply the changes. You can locate this value in the Sys ID field in the Custom Application [sys_app] table.
            • branchName : String (optional)
              Name of the branch in the source control system from which to acquire the application.
            • url : String (optional)
              ServiceNow instance url (usually where the application will be published to).
          • $class: 'ApprendaBuilder'
            • appAlias : String
              The Applicaton Alias to be used.
            • appName : String
              The Applicaton Name to be used.
            • versionAlias : String
              The application Version Alias to target.
            • stage : String
              The desired Apprenda Application lifecycle Stage.
            • artifactName : String
              The filename of the Apprenda Application Package. For example myapplication.zip.
            • credentialsId : String
            • prefix : String
              The Version Alias prefix to be used. Apprenda will append a number to the prefix to complete the Version Alias.
            • advVersionAliasToBeForced : String
              The complete Version Alias, including the Version prefix and Version number to be used. For example v23.
            • advancedNewVersionOption : String
            • customPackageDirectory : String
              The full path to the folder that contains the Apprenda Application Package defined in the Artifact Name.
            • applicationPackageURL : String
              The complete URL to the Apprenda Application Package, starting with http:// or https://.
            • archiveUploadMethod : String
            • buildWithParameters : boolean
              Check this box if you are using a parameterized project and want the Apprenda build step to do the substitution of variables from parameters.
          • aqua
            • locationType : String
            • registry : String
              Name of a Docker registry that is defined in the Aqua Management Console. E.g. Docker Hub.
            • register : boolean
            • localImage : String
              Path of local Docker image, including tag. E.g. my_ubuntu:latest
            • hostedImage : String
              Path of Docker image on registry, including tag. E.g. google/mysql:latest
            • onDisallowed : String
            • notCompliesCmd : String
              A shell command to execute when image does not comply with Aqua security policy
            • hideBase : boolean
            • showNegligible : boolean
            • policies : String
              Comma separated names of image assurance policies. Available for only for local images and with scanner cli > v3.2.
            • customFlags : String
            • localToken : String (optional)
              Scanner Token for Aqua API. * This token will override the Global Token/Username-Password. * Scanner token entered here is applied at job level. User can use a different token for different builds.
            • tarFilePath : String (optional)
            • containerRuntime : String (optional)
            • scannerPath : String (optional)
          • aquaMicroscanner
            • imageName : String
            • onDisallowed : String
            • notCompliesCmd : String
              A shell command to execute when image does not comply with Aqua security policy
            • outputFormat : String
          • aquaServerlessScanner
            • onDisallowed : String
            • notCompliesCmd : String
            • codeScanPath : String
            • customFlags : String
          • arachniScanner
            • url : String
              URL of the system under scan.
            • checks : String
              Here you can specify a comma separated list with the checks to load. Or leave it blank to load all checks.
            • scope
                Nested Object
              • pageLimit : int
                Set the scope property page_limit. See Arachni Security Scanner Wiki for more information.
              • excludePathPattern : String
                Set the scope property exclude_path_patterns. See Arachni Security Scanner Wiki for more information.
            • userConfig
                Nested Object
              • filename : String
                Name of the file with your own configuration in json format. Specify an absolute path or a relative to workspace.
            • format : String
          • $class: 'ArtifactDeployerBuilder'
            • includes : String

              Can use wildcards like 'module/dist/**/*.zip'. See the @includes of Ant fileset for the exact format.
              Artifacts are deployed from the workspace. You can change this basedir by specifying the basedir field under Advanced.

            • basedir : String

              By default, the basedir is the job workspace.
              Give a value to override the default value.

              Path relative to workspace is permitted.

            • excludes : String

              Optionally specify the 'excludes' pattern, such as "foo/bar/**/*". A file that matches this mask will not be deployed even if it matches the mask specified.

            • remote : String

              Artifacts will be deployed in the specified output directory.
              The remote location must be accessible through the build machine (master/slave node).
              If you want to have the ability to download deployed artifacts through the Jenkins dashboard, the location must be accessible from the Jenkins master.
              Make sure the Jenkins process have the right permissions to write to the remote location.
              For example with a shared NFS storage, '/nfs/build/deploy/${BUILD_ID}' can be a valid value on an Unix machine.

            • flatten : boolean

              Ignore the directory structure of the source files, and deploy all the artifacts into the output directory.

            • deleteRemote : boolean

              Delete the output directory before deploying artifacts.

            • deleteRemoteArtifacts : boolean
            • failNoFilesDeploy : boolean
          • $class: 'ArtifactPromotionBuilder'
            Here you can configure the artifact promotion plugin for single artifacts. In the first section (Artifact Information) you enter the coordinates of your artifact.
            In the Staging Repository Information section you tell there your source repository is, e.g. http://192.168.56.24/nexus/content/repositories/staging/.
            In the following section Release Repository Information, you enter the information about the target repository, e.g. http://192.168.56.24/nexus/content/repositories/releases/. In both sections, you can add user credentials. If you do, the connection to the repository servers will be done using these credentials. If you don't suppot credentials, the access will be done without any authentication.
            Both repositorys should be release repositories, not snapshot repos! The password(s) will be saved currently using the standard Jenkins functionality to save those. It's planned to use in the future the credentials plugin.
            • groupId : String
            • artifactId : String
            • classifier : String
            • version : String
            • extension : String
            • stagingRepository : String
            • stagingUser : String
            • stagingPW : String
            • releaseUser : String
            • releasePW : String
            • releaseRepository : String
            • promoterClass : String
            • debug : boolean
            • skipDeletion : boolean

              'Skip deletion' option preserves the files in the staging repository.

              Untick 'Skip deletion' only after you've promoted all the relevant files in previous steps.

          • artifactResolver
            Resolves artifacts against one or more remote maven repositories.
            • artifacts
                Array / List of Nested Object
              • groupId : String
              • artifactId : String
              • version : String
              • classifier : String (optional)
              • deployToLocal : boolean (optional)
              • deployToRemote : boolean (optional)
              • extension : String (optional)
              • failOnError : boolean (optional)
              • pomFile : String (optional)
              • targetFileName : String (optional)
            • enableRepositoryLogging : boolean (optional)
            • enableTransferLogging : boolean (optional)
            • repositoryId : String (optional)
            • targetDirectory : String (optional)
          • artifactVersion
            • name : String (optional)
            • description : String (optional)
            • type : String (optional)
            • groupId : String (optional)
            • artifactId : String (optional)
            • stage : String (optional)
            • flow : String (optional)
            • stageDescription : String (optional)
            • version : String (optional)
          • artifactVersion
            • variableName : String
            • name : String (optional)
            • stage : String (optional)
            • version : String (optional)
          • assertthatBddFeatures
            • projectId : String
              Jira project id.
            • credentialsId : String
            • outputFolder : String

              Output folder for feature files withing workspace. Default ./features/.
              By default features are downloaded to the root of the workspace.
            • jql : String
            • tags : String
            • mode : String
            • proxyURI : String
            • proxyUsername : String
            • proxyPassword : String
            • jiraServerUrl : String
              Jira Server URL. Populate only if using Jira Server version (e.g. https://mycompanyjira.com). Leave blank for cloud.
          • $class: 'AssetBuilder'
            • name : String
            • description : String
            • version : String
            • vendor : String
            • platform : String
            • architecture : String
            • bits : String
            • cpu : int
            • memory : int
            • storage : int
            • installationScriptFilePath : String
            • mediaFilePaths
                Array / List of Nested Object
              • path : String
            • licenseFilePath : String
            • documentationFilePath : String
          • $class: 'AssociateItemToRelease'
            • releasePrefix : String
              Enter the release details. Example: P2#R10
            • itemPrefix : String
              Enter the prefix of your item here. Example: P1#I10 (P1 - Project number, I10 - Item number), P#I11, P#I12, P2#I13
          • associateTag
            • nexusInstanceId : String
            • tagName : String
              The tag which will be applied to components matching the specified search criteria
            • search
              The search criteria used to locate components on the target Nexus Repository Manager server. For more details, please see Search API
                Array / List of Nested Object
              • key : String
              • value : String
          • $class: 'AstreeBuilder'
            • dax_file : String
              Absolute path to the DAX file containing the analysis specification and configuration.
              Note: In this setting, environment variables can be expanded. Expansion will affect all occurrences of the pattern ${name} where name is a valid environment variable name consisting solely of underscores, digits, and alphabetics from the portable character set and where the first character is not a digit.
              Paths and environment variables are evaluated on the machine running Jenkins.
            • analysis_id : String
              ID of an existing, preconfigured analysis on the Astrée server that serves as a revisioning base for the analyses of the current Jenkins project. The analysis, as configured via the supported DAX file, of a build is imported as a new revision into the project with this ID on the server, if such a project exists. The new revision will become a child revision of the last existing revision. If no project with this ID exists on the server, the analysis will become the first revision of a new project with the specified ID.
              Note: In this setting, environment variables can be expanded. Expansion will affect all occurrences of the pattern ${name} where name is a valid environment variable name consisting solely of underscores, digits, and alphabetics from the portable character set and where the first character is not a digit.
            • output_dir : String
              Absolute path to the folder into which the Summary Reports are to be generated. If left empty, reports will be generated into the project's Workspace directory and will be accessible from the Jenkins web interface.
              Note: In this setting, environment variables can be expanded. Expansion will affect all occurrences of the pattern ${name} where name is a valid environment variable name consisting solely of underscores, digits, and alphabetics from the portable character set and where the first character is not a digit.
            • skip_analysis : boolean
              This switch can be used to deactivate the Astrée analysis build step. This switch provides a more convenient method to temporarily deactivate analysis runs than removing the entire build step and reconfiguring the Astrée analysis run from scratch when later adding the build step again.
            • genXMLOverview : boolean
            • genXMLCoverage : boolean
            • genXMLAlarmsByOccurence : boolean
            • genXMLAlarmsByCategory : boolean
            • genXMLAlarmsByFile : boolean
            • genXMLRulechecks : boolean
            • dropAnalysis : boolean
              When this option is activated, the analysis is not stored on the Astrée server, instead it is automatically deleted after the analysis run of the build step.
              This option is very helpful if the analysis run is only specified by a DAX file and it is not intended to archive each analysis run on the server.
              Please be aware that using this option in an analysis run only specified by an analysis ID will result in deleting the analysis with that ID on the Astrée server.
              This option corresponds to adding a --drop to a command line call to Astrée.
            • genPreprocessOutput : boolean
            • failonswitch
              This option allow Astrée to fail a build depeneding on the types of detected code defects. The following settings are available:
              • Only Errors
                ... lets Astrée fail a build if an Error (Definite Type A Alarm) is reported.
                This is the preferred setting for most use cases. A build is failed if Astrée can formally show the presence of a severe code defect in a (analysis) context.
              • Errors and Alarms
                ... lets Astrée fail a build if an Error or Alarm (Definite Type A Alarm or Potential Alarm of Type B or Type C) is reported.
                This is the preferred setting in case the absence of runtime errors in an application is to be formally shown. A build is failed if Astrée reports potential runtime errors.
              • Errors, Alarms, and Data-Flow Anomalies
                ... lets Astrée fail a build if and only if any type of alarm (definite/potential Type A, B, C or D) is reported.
                This setting fails builds on any reported potential code defect or anomaly.
                Nested Object
              • failon : String
          • audit
            • credentialsId : String (optional)
            • minScore : int (optional)
            • platformUrl : String (optional)
            • branchName : String (optional)
            • defaultCollectionName : String (optional)
            • logLevel : String (optional)
            • prId : String (optional)
            • prTargetBranch : String (optional)
            • repositoryName : String (optional)
            • rootDirectory : String (optional)
            • shareEveryone : String (optional)
            • tagName : String (optional)
          • $class: 'AutEnvironmentBuilder'
            • autEnvironmentModel
                Nested Object
              • almServerName : String
              • almUserName : String
              • almPassword : String
              • almDomain : String
              • almProject : String
              • clientType : String
                Client type should be provided if your server is ALM version 12.60 or above.
              • autEnvironmentId : String
                Assign ID of an AUT Environment that exists in the ALM project you selected.
              • useExistingAutEnvConf : boolean
              • existingAutEnvConfId : String
              • createNewAutEnvConf : boolean
              • newAutEnvConfName : String
              • autEnvironmentParameters
                  Array / List of Nested Object
                • name : String
                  The name must be set in the same hierarchical structure as it defined in ALM ( 'Parameters' tab of the AUT Environment)

                  For example: 'Parameters/DB_Setting/Oracle/username'
                • value : String
                  If you are using a 'From JSON' type, specify here the path for the element you would like to get.

                  Make sure you are using JsonPath style for defining it.
                • paramType : String
                  Manual - the value you'll assign for 'Parameter value' field will be used as is.

                  Environmnet - the value you'll assign for 'Parameter value' will be looked for in the environment parameters and the resolved value will be used. If you named your parameter 'my_parameter' put here 'my_parameter' (exactly the same value).

                  From JSON - the value you'll assign for 'Parameter value' will be looked for in the JSON file you specified for the 'Path to JSON file' entry.
                • shouldGetOnlyFirstValueFromJson : boolean
              • pathToJsonFile : String
                A path to the JSON file that will be loaded in order to assign values to all the AUT Environment Parameters of 'From JSON' type.
              • outputParameter : String
                The name of the build environment parameter that will get the ID of the updated/created AUT Environment Configuration. It then can be used as a parameter for following build steps.

                The parameter must be a String Parameter.

                If you named your parameter 'output_parameter' put here 'output_parameter' (exactly the same value).
          • autifyWeb
            • credentialsId : String
              Select the credentials of "Secret Text" storing the Personal Access Token of Autify for Web.
              See Autify's document to understand how to generate the Personal Access Token.
            • autifyUrl : String
              The URL of your test plan or test scenario you want to run on Autify for Web e.g. https://app.autify.com/projects/<ID>/(scenarios|test_plans)/<ID>
            • browser : String (optional)
            • device : String (optional)
            • deviceType : String (optional)
            • os : String (optional)
            • osVersion : String (optional)
            • testExecutionName : String (optional)
            • timeout : String (optional)
              Only meaningful if you check "Wait".
              Timeout seconds when waiting the test finishes. If exceeds, the step will fail.
            • urlReplacements (optional)
              List of a pair of URLs to replace the URL when Autify test accesses. This is useful when you want to run the same Autify test in a different stage e.g. running a test recorded in production against staging.
                Array / List of Nested Object
              • patternUrl : String
              • replacementUrl : String
            • wait : boolean (optional)
              If checked, the step will wait until the Autify's test plan or scenario finishes.
          • $class: 'Autogen'
            • element : String

              Specify the name of the element in your Endevor® sandbox that you want to include in the autogeneration process, for example, RUNCOB01. The maximum length is 8 characters.

              You can specify several specific comma-separated elements within the sandbox, for example, RUNCOB01, RUNCOB02.

              You can use wildcards % and * to define the name patterns for the element names.
              Examples:
              Specify * to include all elements from the sandbox in the autonegeration process.
              Specify RUNCOB* to include all element names that start with "RUNCOB".
              Specify %%%COB* to include elements that contain the substring COB starting after position three.

            • environment : String

              Provide the environment for the Endevor® sandbox that you want to include in the autogeneration process, for example, DEV.

            • system : String

              Provide the system name for the environment in your Endevor® sandbox that you want to include in the autogeneration process, for example, APCTTC0.

            • subsystem : String

              Provide the subsystem name for the environment in your Endevor® sandbox that you want to include in the autogeneration process, for example, TESTCICD.

            • stage : String

              Specify the environment stage in your Endevor® that you want to include in the autogeneration process, for example, 1.

            • instance : String

              Specify the instance name of the environment that is associated with Endevor® Web services, for example, WEBSMFNE.

            • signout : boolean

              Select this option to work with elements in Endevor® that might be currently worked on by another user.

              Select the Override signout option only if you have the permission to override the signout of another user.

          • $class: 'AwsBatchBuilder'
            • jobname : String
            • jobdefinition : String
            • command : String
            • jobqueue : String
            • vcpu : String
            • memory : String
            • retries : String
          • azureCLI
            • principalCredentialId : String
              The Service Principal credentials required to connect to your Azure account.
              More information can be found here: https://github.com/Azure/azure-devops-utils#user-content-create-service-principal
              If you want to add an Azure credential click "Add" and select "Microsoft Azure Service Principal" from the Kind drop-down.
              If you want to remove existing Azure credentials you must go to the Credentials Dashboard.
            • commands
                Array / List of Nested Object
              • script : String
              • exportVariablesString : String
                Export the output of the command to environment variables
                The format: /"variable from JSON" | "desired environment variable name"
                For example: Output: { "id": "/subscriptions/some-guid/resourceGroups/test", "location": "northeurope", "managedBy": null, "name": "test", "properties": { "provisioningState": "Succeeded" }, "tags": null } Environment Variable String: /location|LOCATION , /name|NAME
          • azureDownload
            • storageCredentialId : String
            • downloadType : String
            • buildSelector (optional)
                Nested Choice of Objects
              • downstream
                • upstreamProjectName : String

                  Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.

                  Downstream builds are found using fingerprints of files. That is, a build that is triggered from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.

                  Note: "Downstream build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).

                  AbstractProject based projects:
                  Freestyle projects
                  Multi-configuration projects
                  Maven projects
                  Non AbstractProject based projects:
                  Pipeline jobs (aka. Workflow jobs)

                • upstreamBuildNumber : String
                  The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
              • lastWithArtifacts
                • lastCompleted
                  • $class: 'MultiJobBuildSelector'
                    • buildParameter
                      • parameterName : String
                        Name of the "build selector" parameter. A parameter with this name should be added in the build parameters section above. There is a special parameter type for choosing the build selector.

                        You can pass not only the parameter name, but also the parameter value itself. This is useful especially used with workflow-plugin.

                    • permalink
                      • id : String
                    • $class: 'PromotedBuildSelector'
                      • level : int
                    • latestSavedBuild
                      • specific
                        • buildNumber : String
                          While this selector is for build numbers (e.g. "22" for build #22), you can also resolve build parameters or environment variables (e.g. "${PARAM}"). The display name of a build and permalinks (e.g. "lastSuccessfulBuild", "lastBuild"...) can be used as well.
                      • lastSuccessful
                        • stable : boolean (optional)
                      • upstream
                        • allowUpstreamDependencies : boolean (optional)
                        • fallbackToLastSuccessful : boolean (optional)
                        • upstreamFilterStrategy (optional)
                          Jenkins launches only one build when multiple upstreams triggered the same project at the same time. This field specifies from which upstream build to copy artifacts in those cases. "Use the oldest" copies artifacts from the upstream build with the smallest build number (that is, oldest). "Use the newest" copies artifacts from the upstream build with the largest build number (that is, newest). The default value is "Use global setting", which behaves as configured in "Manage Jenkins" > "Configure System".
                          • Values: UseGlobalSetting, UseOldest, UseNewest
                      • workspace
                      • containerName : String (optional)
                        Enter a storage container name.
                        Environment variables can also be referenced.
                        For example: ${JOB_NAME}
                      • deleteFromAzureAfterDownload : boolean (optional)
                        If checked, the file copy on Azure will be removed after it's downloaded to local.
                      • downloadDirLoc : String (optional)
                        Enter a download path. If not specified, the files will be downloaded into the job's workspace.
                        Environment variables can also be referenced, for example: ${JOB_NAME} If "Flatten Directories" is checked, this directory will contain all outputs.
                      • excludeFilesPattern : String (optional)
                        Enter a pattern of blobs to exclude from the download. Ant fileset syntax. Leaving blank will download the entire container. Environment variables can also be referenced.
                        For example: ${JOB_NAME}
                      • fileShare : String (optional)
                        Enter a Azure File Storage Share name.
                        Environment variables can also be referenced.
                        For example: ${JOB_NAME}
                      • flattenDirectories : boolean (optional)
                        If checked, all files specified for download will be flattened to the single download directory. If two files are named the same in different directories, only one will remain.
                      • includeArchiveZips : boolean (optional)
                        The archive zip files generated (archive.zip in the root of the container/virtual path) are typically excluded from download. Check this to enable downloading of the archive zip.
                      • includeFilesPattern : String (optional)
                        Enter a pattern of blobs to download. Ant fileset syntax. Environment variables can also be referenced.
                        For example: ${JOB_NAME}
                      • projectName : String (optional)
                        The name of the project to download the managed artifact from.
                      • verbose : boolean (optional)

                        Enabling this will provide more logging on downloading files.

                    • $class: 'BDSBuilder'
                      • projectFile : String
                      • switches : String
                      • installationName : String
                    • $class: 'BapFtpBuilder'
                      Send files over FTP as a build step during the build.
                      • publishers
                          Array / List of Nested Object
                        • configName : String

                          Select an FTP configuration from the list configured in the global configuration of this Jenkins.

                          The configuration defines the connection properties and base directory of the FTP server.

                        • verbose : boolean
                          Select to enable logging of all commands sent to, and responses received from the FTP server in the Jenkins console.
                        • transfers
                            Array / List of Nested Object
                          • sourceFiles : String

                            Files to upload to a server.

                            The string is a comma separated list of includes for an Ant fileset eg. '**/*.jar' (see Patterns in the Ant manual).
                            The base directory for this fileset is the workspace.

                          • excludes : String

                            Exclude files from the Transfer set.

                            The string is a comma separated list of excludes for an Ant fileset eg. '**/*.log,**/*.tmp,.git/' (see Patterns in the Ant manual)

                          • remoteDirectory : String

                            Optional destination folder.

                            This folder will be below the one in the global configuration, if present.
                            The folder will be created if does not exist.

                          • removePrefix : String

                            First part of the file path that should not be created on the remote server.

                            Directory structures are created relative to the base directory, which is usually the workspace.
                            You normally do not want the full path to these files to be created on the server.
                            For example if Source files were target/deployment/images/**/ then you may want Remove prefix to be target/deployment This would create the images folder under the remote directory, and not target/deployment
                            Jenkins environment variables can be used in this path.

                            If you use remove prefix, then ALL source file paths MUST start with the prefix.

                          • asciiMode : boolean

                            Select to enable ASCII mode for the transfer, otherwise binary transfer mode will be used.

                            Use with ASCII text files to fix the line terminators when transferring between different operating systems.

                          • remoteDirectorySDF : boolean

                            Select this to include the timestamp in the remote directory.

                            The timestamp is the date of build. If this publisher is being used during a promotion, then the timestamp is that of the build that is being promoted.
                            This setting turns the remote directory option into a java SimpleDateFormat.
                            The SimpleDateFormat(SDF) uses letters to represent components of the date, like the month, year, or day of the week. Click here for more information about the date patterns.
                            As the SDF reserves all of the letters [A-Z][a-z], any that you want to appear literally in the directory that is created will need to be quoted.

                            Some examples follow - all examples are based on a build with a timestamp of 3:45 pm and 55 seconds on the 7th November 2010.

                            Remote directory Directories created
                            'qa-approved/'yyyyMMddHHmmss qa-approved/20101107154555
                            'builds/'yyyy/MM/dd/'build-${BUILD_NUMBER}' builds/2010/11/07/build-456 (if the build was number 456)
                            yyyy_MM/'build'-EEE-d-HHmmss 2010_11/build-Sun-7-154555
                            yyyy-MM-dd_HH-mm-ss 2010-11-07_15-45-55

                          • flatten : boolean

                            Only create files on the server, don't create directories (except for the remote directory, if present).

                            All files that have been selected to transfer must have unique filenames. The publisher will stop and fail as soon as a duplicate filename is found when using the flatten option.

                          • cleanRemote : boolean

                            Select to delete all files and directories within the remote directory before transferring files.

                          • noDefaultExcludes : boolean
                          • makeEmptyDirs : boolean

                            The default behaviour of this plugin is to match files, and then create any directories required to preserve the paths to the files.
                            Selecting this option will create any directories that match the Source files pattern, even if empty.

                          • patternSeparator : String

                            The regular expression that is used to separate the Source files and Exclude files patterns.

                            The Source files and Exclude files both accept multiple patterns that by default are split using

                            [, ]+
                            which is how Ant, by default, handles multiple patterns in a single string.

                            The above expression makes it difficult to reference files or directories that contain spaces. This option allows the expression to be set to something that will preserve the spaces in a pattern eg. a single comma.

                        • useWorkspaceInPromotion : boolean

                          Set the root directory for the Source files to the workspace.

                          By default this plugin uses the artifacts directory (where archived artifacts are stored). This allows the artifacts from the build number that you are promoting to be sent somewhere else.

                          If you run tasks that produce files in the workspace during the promotion and you want to publish them, then set this option.

                          If you need to send files from both the workspace and the archive directory, then you need to add a second server, even if you want to send the files to the same place. This is due to the fact that the workspace is not necessarily on the same host as the archive directory

                        • usePromotionTimestamp : boolean

                          Use the build time of the promotion when the remote directory is a date format.

                          By default this plugin uses the time of the original build (the one that is being promoted) when formatting the remote directory. Setting this option will mean that if you use the remote directory is a date format option, it will use the time that the promotion process runs, instead of the original build.

                        • ftpRetry

                          If publishing to this server fails, try again.

                          Files that were successfully transferred will not be re-sent.
                          If the Clean remote option is selected, and succeeds, it will not be attempted again.

                            Nested Object
                          • retries : int
                            The number of times to retry this server in the event of failure.
                          • retryDelay : long
                            The time to wait, in milliseconds, before attempting another transfer.
                        • ftpLabel

                          Set the label for this Server instance - for use with Parameterized publishing.

                          Expand the help for Parameterized publishing for more details.

                            Nested Object
                          • label : String

                            Set the label for this Server instance - for use with Parameterized publishing.

                            Expand the help for Parameterized publishing for more details.

                        • ftpCredentials
                          Set the username and password to use with this connection.

                          If you want to use different credentials from those configured for this server, or if the credentials have not been specified for this server, then enable this option and set the username and password to use.

                            Nested Object
                          • username : String
                          • password : String
                      • continueOnError : boolean
                      • failOnError : boolean
                      • alwaysPublishFromMaster : boolean
                      • masterNodeName : String
                      • paramPublish
                          Nested Object
                        • parameterName : String
                          The name of the parameter or environment variable that will contain the expression for matching the labels.
                    • $class: 'BapSshBuilderPlugin'
                      Send files or execute commands over SSH as a build step during the build.
                      • publishers
                          Array / List of Nested Object
                        • configName : String

                          Select an SSH configuration from the list configured in the global configuration of this Jenkins.

                          The configuration defines the connection properties and base directory of the SSH server.

                        • verbose : boolean
                          Select to enable an obscene amount of information to the Jenkins console - only really useful to help track down problems.
                        • transfers
                            Array / List of Nested Object
                          • sourceFiles : String

                            Files to upload to a server.

                            The string is a comma separated list of includes for an Ant fileset eg. '**/*.jar' (see Patterns in the Ant manual).
                            The base directory for this fileset is the workspace.

                          • excludes : String

                            Exclude files from the Transfer set.

                            The string is a comma separated list of excludes for an Ant fileset eg. '**/*.log,**/*.tmp,.git/' (see Patterns in the Ant manual)

                          • remoteDirectory : String

                            Optional destination folder.

                            This folder will be below the one in the global configuration, if present.
                            The folder will be created if does not exist.

                          • removePrefix : String

                            First part of the file path that should not be created on the remote server.

                            Directory structures are created relative to the base directory, which is usually the workspace.
                            You normally do not want the full path to these files to be created on the server.
                            For example if Source files were target/deployment/images/**/ then you may want Remove prefix to be target/deployment This would create the images folder under the remote directory, and not target/deployment
                            Jenkins environment variables can be used in this path.

                            If you use remove prefix, then ALL source file paths MUST start with the prefix.

                          • remoteDirectorySDF : boolean

                            Select this to include the timestamp in the remote directory.

                            The timestamp is the date of build. If this publisher is being used during a promotion, then the timestamp is that of the build that is being promoted.
                            This setting turns the remote directory option into a java SimpleDateFormat.
                            The SimpleDateFormat(SDF) uses letters to represent components of the date, like the month, year, or day of the week. Click here for more information about the date patterns.
                            As the SDF reserves all of the letters [A-Z][a-z], any that you want to appear literally in the directory that is created will need to be quoted.

                            Some examples follow - all examples are based on a build with a timestamp of 3:45 pm and 55 seconds on the 7th November 2010.

                            Remote directory Directories created
                            'qa-approved/'yyyyMMddHHmmss qa-approved/20101107154555
                            'builds/'yyyy/MM/dd/'build-${BUILD_NUMBER}' builds/2010/11/07/build-456 (if the build was number 456)
                            yyyy_MM/'build'-EEE-d-HHmmss 2010_11/build-Sun-7-154555
                            yyyy-MM-dd_HH-mm-ss 2010-11-07_15-45-55

                          • flatten : boolean

                            Only create files on the server, don't create directories (except for the remote directory, if present).

                            All files that have been selected to transfer must have unique filenames. The publisher will stop and fail as soon as a duplicate filename is found when using the flatten option.

                          • cleanRemote : boolean
                          • noDefaultExcludes : boolean
                          • makeEmptyDirs : boolean

                            The default behaviour of this plugin is to match files, and then create any directories required to preserve the paths to the files.
                            Selecting this option will create any directories that match the Source files pattern, even if empty.

                          • patternSeparator : String

                            The regular expression that is used to separate the Source files and Exclude files patterns.

                            The Source files and Exclude files both accept multiple patterns that by default are split using

                            [, ]+
                            which is how Ant, by default, handles multiple patterns in a single string.

                            The above expression makes it difficult to reference files or directories that contain spaces. This option allows the expression to be set to something that will preserve the spaces in a pattern eg. a single comma.

                          • execCommand : String (optional)

                            A command to execute on the remote server.

                            This command will be executed on the remote server after any files are transferred.
                            The SSH Transfer Set must include either a Source Files pattern, an Exec command, or both. If both are present, the files are transferred before the command is executed. If you want to Exec before the files are transferred, use 2 Transfer Sets and move the Exec command before the Transfer set that includes a Source files pattern.

                          • execTimeout : int (optional)

                            Timeout in milliseconds for the Exec command.

                            Set to zero to disable.

                          • usePty : boolean (optional)

                            Exec the command in a pseudo tty.

                            This will enable the execution of sudo commands that require a tty (and possibly help in other scenarios too.)
                            From the sudoers(5) man page:

                            requiretty      If set, sudo will only run when the user is logged in
                                            to a real tty.  When this flag is set, sudo can only be
                                            run from a login session and not via other means such
                                            as cron(8) or cgi-bin scripts.  This flag is off by
                                            default.
                                

                          • useAgentForwarding : boolean (optional)

                            Exec the command using Agent Forwarding.

                            Allows a chain of ssh connections to forward key challenges back to the original agent, thus eliminating the need for using a password or public/private keys for these connections.

                            From the ssh(1) man page:

                                    Enables forwarding of the authentication agent connection.  This can also be specified on a per-host basis in a configuration file.
                            
                                    Agent forwarding should be enabled with caution.  Users with the ability to bypass file permissions on the remote host (for the agent's UNIX-domain socket) can access the local agent through the forwarded connection.
                                    An attacker cannot obtain key material from the agent, however they can perform operations on the keys that enable them to authenticate using the identities loaded into the agent.
                                
                          • useSftpForExec : boolean (optional)

                            Using SFTP protocol instead of SSH for Exec command.

                            Supported commands: mkdir, ln, symlink, rm, rmdir, cd, get, ls

                        • useWorkspaceInPromotion : boolean

                          Set the root directory for the Source files to the workspace.

                          By default this plugin uses the artifacts directory (where archived artifacts are stored). This allows the artifacts from the build number that you are promoting to be sent somewhere else.

                          If you run tasks that produce files in the workspace during the promotion and you want to publish them, then set this option.

                          If you need to send files from both the workspace and the archive directory, then you need to add a second server, even if you want to send the files to the same place. This is due to the fact that the workspace is not necessarily on the same host as the archive directory.

                        • usePromotionTimestamp : boolean

                          Use the build time of the promotion when the remote directory is a date format.

                          By default this plugin uses the time of the original build (the one that is being promoted) when formatting the remote directory. Setting this option will mean that if you use the remote directory is a date format option, it will use the time that the promotion process runs, instead of the original build.

                        • sshRetry

                          If publishing to this server or command execution fails, try again.

                          Files that were successfully transferred will not be re-sent.
                          If Exec command is configured, but fails in any way (including a non zero exit code), then it will be retried.

                            Nested Object
                          • retries : int
                            The number of times to retry this server in the event of failure.
                          • retryDelay : long
                            The time to wait, in milliseconds, before attempting another transfer.
                        • sshLabel

                          Set the label for this Server instance - for use with Parameterized publishing.

                          Expand the help for Parameterized publishing for more details.

                            Nested Object
                          • label : String

                            Set the label for this Server instance - for use with Parameterized publishing.

                            Expand the help for Parameterized publishing for more details.

                        • sshCredentials
                          Set the credentials to use with this connection.

                          If you want to use different credentials from those configured for this server, or if the credentials have not been specified for this server, then enable this option and set them here.

                            Nested Object
                          • username : String
                            The username to connect with.
                          • encryptedPassphrase : String
                            The passphrase for the private key, or the password for password authentication if no Key or Path to key is configured.
                            Leave blank if the key is not encrypted.
                          • key : String

                            The private key.

                            Paste the private key here, or provide the path to the file containing the key in Path to key.

                          • keyPath : String

                            The path to the private key.

                            Either supply the path to the file containing the key, or paste the key into the Key box.
                            The Path to key can be absolute, or relative to $JENKINS_HOME

                      • continueOnError : boolean
                      • failOnError : boolean
                      • alwaysPublishFromMaster : boolean
                      • masterNodeName : String
                      • paramPublish
                          Nested Object
                        • parameterName : String
                          The name of the parameter or environment variable that will contain the expression for matching the labels.
                    • batchFile
                      • command : String
                      • configuredLocalRules (optional)
                          Array / List of Nested Choice of Objects
                        • retainOnlyVariables

                          Limit which environment variables are passed to a build step.

                          Environment variables passed to the build step are filtered, unless listed below.

                          The behavior of this filter depends on whether the environment variable is originally defined outside Jenkins:

                          • If the environment variable originates from Jenkins configuration, such as JOB_URL, it will not be passed to the build step unless specified here.
                          • If the environment variable originates from outside Jenkins, such as PATH, the behavior depends on the option Process environment variables handling: If that option is set to Retain, the original value will be passed to the build step, discarding any modifications inside Jenkins. If that option is set to Remove, the variable will not be passed to the build step.

                          The following table shows the effect of filtering on an environment variable:

                          Behavior Originally defined outside Jenkins Originally defined inside Jenkins
                          Process environment variables handling: reset Variable is reset to original value Variable is removed
                          Process environment variables handling: removed Variable is removed Variable is removed
                          • processVariablesHandling (optional)
                            • Values: RESET, REMOVE
                          • retainCharacteristicEnvVars : boolean (optional)

                            When checked, characteristic environment variables will be retained in addition to the variables listed above. These environment variables are job- and build-specific, defined by Jenkins, and are used to identify and kill processes started by this build step. See the documentation for more details on starting processes.

                          • variables : String (optional)

                            Whitespace separated, case insensitive list of environment variables that will be retained, i.e. not removed from the environment of this build step or reset to their default.

                      • unstableReturn : int (optional)
                        If set, the batch errorlevel result that will be interpreted as an unstable build result. If the final errorlevel matches the value, the build results will be set to unstable and next steps will be continued. Supported values match the widest errorlevel range for Windows like systems. In Windows NT4 and beyond the ERRORLEVEL is stored as a four byte, signed integer, yielding maximum and minimum values of 2147483647 and -2147483648, respectively. Older versions of Windows use 2 bytes. DOS like systems use single byte, yielding errorlevels between 0-255. The value 0 is ignored and does not make the build unstable to keep the default behaviour consistent.
                    • snBatchInstall
                      • credentialsId : String (optional)
                        User name and password defined in global credentials (credentials ID is required here) used for the instance where the application will be installed.
                      • apiVersion : String (optional)
                        Optional. Version of the endpoint to access. For example, v1 or v2. Only specify this value to use an endpoint version other than the latest.
                      • batchName : String (optional)
                        Required. User specified descriptive name for this batch request.
                      • file : String (optional)
                        Name of the batch file with json manifest. If only a name is given or relative path then the file will be searched in WORKSPACE directory of the build.

                        The field is required if Use file is checked. If the field is not changed default value will be used: now_batch_manifest.json.

                      • notes : String (optional)
                        User specified additional notes about the batch install plan.

                        Default: null

                      • packages : String (optional)
                        Required. JSON array, where each object specifies details of a package to install.
                                
                            [{
                                "id": "String",
                                "load_demo_data": Boolean,
                                "notes": "String",
                                "requested_customized_version": "String",
                                "requested_version": "String",
                                "type": "String"
                            }]
                                
                            
                        id Required. Sys_id of the application or identifier of the plugin to install.
                        load_demo_data Flag that indicates whether demo data is loaded when installing the package.
                        Valid values:
                         true: Demo data should be loaded.
                         false: Demo data should not be loaded.
                        Default: false
                        notes User specified notes about the package.
                        Default: null
                        requested_customized_version Only applicable when packages.type is set to application. Version of the store application customization package to install, such as 1.0.2 or 2.3.
                        requested_customized_version Only applicable when packages.type is set to application. Version of the store application customization package to install, such as 1.0.2 or 2.3.

                        Default: None. If this is not set, then the system does not look for customizations for the application.
                        requested_version Required if type is set to application; ignored if set to plugin. Version of the package to install, such as 1.0.2 or 2.3.
                        type Required. Type of package.
                        Valid values:
                        • application
                        • plugin
                      • url : String (optional)
                        ServiceNow instance url where the application will be installed.
                      • useFile : boolean (optional)
                        Specifies if manifest json file will be used to define the batch. The file can be stored in git repository (in this case SCM should be configured).

                        Default: false

                    • snBatchRollback
                      • credentialsId : String (optional)
                        User name and password defined in global credentials (credentials ID is required here).
                        If ServiceNow Parameters are used, then credentials for installation instance will be used.
                      • apiVersion : String (optional)
                        Optional. Version of the endpoint to access. For example, v1 or v2. Only specify this value to use an endpoint version other than the latest.
                      • rollbackId : String (optional)
                        Unique identifier (sys_id) of the rollback installed before.
                      • url : String (optional)
                        ServiceNow instance url where the batch of packages was installed.

                        If ServiceNow Parameters are used, then the URL of installation instance will be used.

                    • $class: 'BeaglePlugin'
                      • apptoken

                        Generate your Application Token From Beagle

                        Home -> Applications -> Select your Application -> Settings -> Application Token
                        • Type: class hudson.util.Secret
                      • accesstoken

                        Generate your Access Token From Beagle User Settings

                        Settings -> Access Token -> Generate Your New Personal Access Token
                        • Type: class hudson.util.Secret
                    • $class: 'BeakerBuilder'
                      • jobSource
                          Nested Choice of Objects
                        • $class: 'FileJobSource'
                          • jobPath : String
                        • $class: 'StringJobSource'
                          • jobContent : String
                      • downloadFiles : boolean
                    • $class: 'BeginAnalysis'
                      • logLevel
                        • Values: OFF, INFO, DEBUG, WARN, ERROR
                      • buildSessionId : String
                      • appName : String
                      • moduleName : String
                      • branch : String
                      • enableMultipleBuildFiles : boolean
                      • overrideJars : boolean
                      • multipleBuildFiles : boolean
                      • labId : String
                      • testStage : String
                      • packagesIncluded : String
                      • packagesExcluded : String
                      • filesIncluded : String
                      • filesExcluded : String
                      • classLoadersExcluded : String
                        In order to exclude class loaders from the build, please provide comma separated list of class loaders names to exclude. Class loader name should be the class loader full package name. e.g. 'com.example.package.SomeClassLoader'
                      • recursive : boolean
                      • workspacepath : String
                      • buildScannerJar : String
                      • testListenerJar : String
                      • testListenerConfigFile : String
                      • autoRestoreBuildFile : boolean
                      • sealightsMavenPluginInstallationArguments : String
                      • buildFilesPatterns : String
                      • buildFilesFolders : String
                      • logEnabled : boolean
                      • logDestination
                        • Values: CONSOLE, FILE
                      • logFolder : String
                      • buildStrategy
                        • Values: ONE_BUILD, BUILD_EACH_MODULE
                      • slMvnPluginVersion : String
                      • buildName
                          Nested Choice of Objects
                        • $class: 'DefaultBuildName'
                          • $class: 'EmptyBuildName'
                            • $class: 'LatestBuildName'
                              • $class: 'ManualBuildName'
                                • insertedBuildName : String
                              • $class: 'UpstreamBuildName'
                                • upstreamProjectName : String
                            • executionType
                              • Values: FULL, TESTS_ONLY, ONLY_LISTENER
                            • override_customerId : String
                            • override_url : String
                            • override_proxy : String
                            • additionalArguments : String
                              This section allows you to add additional arguments, as key-value pairs.
                              Example for additional arguments:

                              server=https://prod-sealights-gw.sealights.co
                              proxy=http://localhost:8888

                              Argument name Description
                              token The token provided to you by SeaLights (override the global 'token' value for this build).
                              tokenfile A file containing the token provided to you by SeaLights (override the global 'token' value for this build).
                              buildsessionidfile Set build session id file for this build.
                              createbuildsessionid When set to 'true' - forces SeaLights Maven Plugin to create new build session id (true by default).
                              proxy A valid URL to a proxy server.
                              agentpath Override the path to SeaLights jar.
                              javapath Override the path to the 'java' variable (default is 'java').
                              filesstorage A folder where sealights files for this build will be kept (override the global 'Files storage' value for this build).
                              sealightsJvmParams Key value pairs of environments variables which will be added to both buildscanner and test listener ('$$$'- separated pairs, ':'- separated key and value. i.e: sealightsJvmParams=param:value$$$anotherparam:anothervalue)
                              buildScannerParams Key value pairs of environments variables which will be added to buildscanner ('$$$'- separated pairs, ':'- separated key and value. i.e: buildScannerParams=param:value$$$anotherparam:anothervalue)
                              testListenerJvmParams Key value pairs of environments variables which will be added to test listener ('$$$'- separated pairs, ':'- separated key and value i.e: testListenerJvmParams=param:value$$$anotherparam:anothervalue)
                            • includeResources : boolean
                              When checked, the build session id and token files will be added to the artifacts as as resources in the folder.
                          • benchmark
                            • filepath : String
                              Please insert a filepath.
                          • $class: 'BitbucketPublisher'
                            • serverUrl : String (optional)
                              Bitbucket Server Url.
                            • credentialsId : String (optional)
                              Credentials for bitucket server. The user must have access to create project and repository.
                            • projectKey : String (optional)
                              Input the project key for the bitbucket.
                            • createProject (optional)
                              Check this if you want to create the bitbucket project.
                                Nested Object
                              • projectName : String
                              • projectUsers : String
                              • projectGroups : String
                            • createJenkinsJobs (optional)
                              Check this if you want to use the bitbucket post commit external hook to call.
                                Nested Object
                              • ciServer : String
                            • projectName : String (optional)
                              Input name of the Bitbucket project.
                          • $class: 'BladeBuilder'
                            • blades
                                Array / List of Nested Choice of Objects
                              • $class: 'CodeScan'
                                • source : String
                                • exclude : String
                                • noCache : boolean
                                • noProxy : boolean
                                • noBlame : boolean
                                • ruleset : String
                                • severityLevel : String
                                • severityThreshold : int
                                • autoUpdate : boolean (optional)
                                • credentialsId : String (optional)
                                • debug : boolean (optional)
                                • directory : String (optional)
                                • environment : String (optional)
                                • forceVersion : String (optional)
                                • ignoreFailure : boolean (optional)
                                • onFailureCmd : String (optional)
                                • timeout : int (optional)
                              • $class: 'ImageScan'
                                • image : String
                                • exclude : String
                                • noCache : boolean
                                • noProxy : boolean
                                • noBlame : boolean
                                • ruleset : String
                                • severityLevel : String
                                • severityThreshold : int
                                • autoUpdate : boolean (optional)
                                • credentialsId : String (optional)
                                • debug : boolean (optional)
                                • directory : String (optional)
                                • environment : String (optional)
                                • forceVersion : String (optional)
                                • ignoreFailure : boolean (optional)
                                • onFailureCmd : String (optional)
                                • timeout : int (optional)
                          • $class: 'BlueprintLaunch'
                            • projectName : String

                              Project selection is mandatory.

                            • blueprintName : String

                              Blueprint selection is mandatory.

                            • applicationName : String

                              Application Name is mandatory.

                              This is the Application name used for blueprint launch in Nutanix Calm. Appending the _${BUILD_ID} to the Application name is recommended for unique application names. Other Jenkins Environment Variables may also be used.

                            • appProfileName : String

                              Application Profile selection is mandatory.

                            • actionName : String

                              The field is mandatory


                              Select the required action need to run after the application launch from the list of actions, else please select none.

                            • runtimeVariables : String

                              Click on Fetch Runtime Variables to fetch all editable variables for the selected Application Profile in JSON format. Modify the key values from the defaults as needed.The values can also reference jenkins environment variables.

                            • waitForSuccessFulLaunch : boolean
                            • blueprintDescription : String

                              Description is fetched from the selected Calm blueprint

                          • BMC DevOps for CFA Plugin
                            • server : String
                              URL or IP address.
                            • port : String
                              z/OSMF Port
                            • user : String
                              z/OS user name
                            • jclContent : String
                            • chkfreq : String
                            • jobCard : String
                            • acctno : String
                            • thresh : String
                            • sortby : String
                            • pswd : String
                            • prilog : String
                            • cfaLoadLibs
                                Array / List of Nested Object
                              • lib : String
                            • cfaSldsLibs
                                Array / List of Nested Object
                              • sldsname : String
                              • sldsver : String
                              • sldsunit : String
                              • sldsvolser : String
                            • cfaDliLibs
                                Array / List of Nested Object
                              • dliname : String
                              • dliver : String
                              • dliunit : String
                              • dlivolser : String
                            • cfaJobnames
                                Array / List of Nested Object
                              • jobname : String
                            • cfaReconSets
                                Array / List of Nested Object
                              • recon1 : String
                              • recon2 : String
                              • recon3 : String
                            • goodRC : String
                              Any value that is above the acceptable return code will be considered as FAILURE.
                            • bmcSlds : boolean

                              You can use the SLDS keyword on the ANALYZE control statement to identify explicitly an input log data set to use as input to the analysis process. SLDS=(dataSetName,Rvr, unit,volser) If you want CFA to read multiple log data sets, specify multiple instances of the SLDS keyword.
                              Example: IMSA is an IMS version 14.1 system and creates generations of SLDSs that use the naming convention imsid.SLDS.Ddate.GENnnn. The SLDSs are cataloged. To analyze log records that IMSA wrote to generations 10 through 12 on March 29, 2015, specify the following keywords on the ANALYZE control statement:
                              SLDS=(IMSA.SLDS.D2008088.GEN010, R141)
                              SLDS=(IMSA.SLDS.D2008088.GEN011, R141)
                              SLDS=(IMSA.SLDS.D2008088.GEN012, R141)

                            • bmcDb2log : boolean

                              You can use the DB2LOG keyword on the ANALYZE control statement to identify a DB2 log data set that was created by a DB2 subsystem.
                              Note: If you specify the DB2LOG keyword, do not specify the DB2BSDS keyword.

                            • db2log : String
                              Specify the fully qualified data set name. No default value is provided.
                              If you omit the DB2LOG keyword, CFA does not read any DB2 logs.
                            • db2bsds : String
                            • limit : String
                            • skip : String
                            • maxlogs : String

                              If you specify a value from 1 through 999, Log Analyzer stops reading log data sets after it reaches the specified number of log data sets. If Log Analyzer does not read other log data sets because the specified limit was reached, a warning message indicates the number of log data sets that were not read.

                              If you want Log Analyzer to read all log data sets, specify MAXLOGS=999.

                              The default is MAXLOGS=100 (Log Analyzer reads a maximum of 100 log data sets).

                            • bmcDb2bsds : boolean

                              You can use the DB2BSDS keyword on the ANALYZE control statement to identify a DB2 bootstrap data set (BSDS).
                              Specify the fully qualified data set name. This name should refer to a VSAM key-sequenced data set (KSDS).
                              Do not specify the name of a BSDS archive copy, which is not a VSAM KSDS. BSDS cannot be a TAPE dataset.
                              Note:

                              • No default value is provided. If you omit the DB2BSDS keyword, CFA does not read any DB2 BSDSs.
                              • If you specify the DB2BSDS keyword, do not specify the DB2LOG keyword.

                            • bmcLimit : boolean

                              You can use the LIMIT keyword (or the LIM abbreviation) on the ANALYZE control statement to set a limit on the number (1 through 9999999999) of log records to process from an input log data set.
                              Note:

                              • The default is LIMIT=9999999999.
                              • If you specify the LIMIT keyword, you must specify one SLDS keyword. The SLDS keyword is required, and multiple SLDS keywords are not allowed.

                            • bmcSkip : boolean

                              You can use the SKIP keyword on the ANALYZE control statement to specify a number (1 through 9999999999) of log records in an input log data set to skip before CFA begins to process records.
                              The default is SKIP=0, which skips no records.
                              Note:
                              If you specify the SKIP keyword, you must specify one SLDS keyword. The SLDS keyword is required, and multiple SLDS keywords are not allowed.

                            • bmcActiveOlds : boolean
                              You can use the ACTIVEOLDS keyword (or the AOLDS abbreviation) on the ANALYZE control statement to specify whether CFA can select an active OLDS during RECON processing
                            • bmcImsid : boolean

                              You can use the IMSID keyword on the ANALYZE control statement to specify one or more IMSIDs.
                              If you do not check this option,then the the default IMSID=ALL will be taken and all log records for all IMS systems that are associated with the input RECON data set (or data sets) will be considered.
                              Note:
                              If you specify the SLDS keyword, you cannot specify the IMSID keyword. The IMSID keyword applies only if CFA is reading RECON data sets to determine which log data sets to process.

                            • bmcDlilog : boolean

                              You can use the DLILOG keyword on the ANALYZE control statement to identify explicitly an input dli log data set to use as input to the analysis process.
                              Specify the keyword values as follows:
                              DLILOG=(dataSetName,Rnn)
                              DLILOG=(dataSetName,Rvr,unit,volser)
                              Notes:

                              • This keyword is used only for the APPCHECK report.
                              • The DLILOG datasets that are processed for the APPCHECK report for DLI are the DLI logs created by using the DLI batch job that uses the //IEFRDER DD statement. For more information about //IEFRDER DD, refer to the IBM IMS Program Restart Facility for z/OS documentation.
                            • bmcMaxlogs : boolean
                              You can use the MAXLOGS keyword (or the MAXL abbreviation) on the ANALYZE control statement to control the number of log data sets that Log Analyzer processes.

                              Use this keyword when you are using implicit specification of log data sets and Log Analyzer is reading RECON data sets to determine which log data sets to process. In this case, the number of log data sets to be processed is unknown. The MAXLOGS keyword can help you prevent a problem that could result from processing an excessive number of log data sets.

                              The MAXLOGS keyword works differently, depending on how you specify the value:

                            • bmcJobname : boolean

                              You can use the JOBNAME keyword on the ANALYZE control statement to specify one or more JOBNAMEs. Each JOBNAME (one to eight characters) identifies a Job name. Log Analyzer uses the JOBNAME when determining which dli log data sets to use as input.
                              To process log records for all Job names that are associated with the input RECON data set (or data sets), specify JOBNAME=ALL.
                              If you omit the JOBNAME sub-keyword, Log Analyzer uses the default value ALL.
                              Note:

                              • If you specify the DLILOGS keyword, you cannot specify the JOBNAME keyword. The JOBNAME keyword applies only if Log Analyzer is reading RECON data sets to determine which log data sets to process.
                              • Log Analyzer will process all the jobs in the DLILOGs that get selected by the JOBNAME filter.
                              • To later filter the report by job name, use the JOB sub-keyword of the APPCHECK report.

                            • cfaImsids
                                Array / List of Nested Object
                              • imsid : String
                            • bmcRecon : boolean

                              You can use the RECON keyword on the ANALYZE control statement to specify the names of a set of RECON data sets to examine during the CFA job.

                              If you want CFA to examine multiple sets of RECON data sets, you must specify each set with a separate RECON keyword.

                              If you specify the RECON keyword, your user ID must have Security Access Facility (SAF) READ access to the RECON data sets.

                              You can specify from one to three data set names. One of the specified data set names must be designated as COPY1 by IMS.

                              Example:
                              The RECON data sets for the IMSA system are named IMSA.RECON1 and IMSA.RECON2, and the RECON data sets for the IMSB system are named IMSB.RECON1 and IMSB.RECON2. To examine IMSA and IMSB RECON data sets in the CFA job, specify the following keywords on the ANALYZE control statement:
                              RECON=(IMSA.RECON1, IMSA.RECON2)
                              RECON=(IMSB.RECON1, IMSB.RECON2)
                              Note:
                              If you specify the RECON keyword, you must specify the INTERVAL control statement with a START time value and a STOP time value.

                            • bmcTimezone : boolean
                              You can use the TIMEZONE keyword on the ANALYZE control statement to specify how time values are interpreted when you are specifying time input values and when CFA is displaying time values in reports and on panels.
                              Note:
                              The default is TIMEZONE=LOCAL.
                            • bmcStartInterval : boolean

                              You can use the START keyword on the INTERVAL control statement for the following purposes:

                              • Specify the beginning a range of log records to identify as candidates for the record selection process.
                              • Control the beginning of range of log data sets to allocate from RECON information.
                              • Reduce the overall number of log records that are selected from input SLDS or extract files.

                            • bmcStopInterval : boolean

                              You can use the STOP keyword on the INTERVAL control statement for the following purposes:
                              � Specify the end of a range of log records to identify as candidates for the record selection process
                              � Control the end of range of log data sets to allocate from RECON information
                              � Reduce the overall number of log records that are selected from input SLDS or extract files

                            • start
                                Nested Object
                              • value : String
                              • startDate : String
                              • startlogSeq : String
                            • stop
                                Nested Object
                              • value : String
                              • stopDate : String
                              • stoplogSeq : String
                            • tz
                                Nested Object
                              • value : String
                              • timezoneoffset : String
                            • jobInclude : String
                            • jobExclude : String
                            • psbInclude : String
                            • psbExclude : String
                            • maxlogsRc : String

                              If you specify a value from 1 through 999 followed by literal R and a return code (08 through 99), Log Analyzer issues the specified return code and terminates the job step if more than the specified number of log data sets would be read. Log Analyzer issues the return code at the conclusion of the RECON analysis phase without reading any input log data sets.

                              Example:

                              If you want Log Analyzer to issue return code 16 and terminate the job step if more than 10 log data sets would be read, specify the following keyword on the ANALYZE control statement:

                              MAXLOGS=(10,R16)

                            • maxlogsAbend : String

                              If you specify a value from 1 through 999 followed by an abend code (1 through 4095), Log Analyzer issues a user abend code and terminates the job step if more than the specified number of log data sets would be read. Log Analyzer issues the user abend at the conclusion of the RECON analysis phase without reading any input log data sets.

                              Example:

                              If you want Log Analyzer to issue a user abend, with abend code U4000, if more than 120 log data sets would be read, specify the following keyword on the ANALYZE control statement:

                              MAXLOGS=(120,4000)

                            • bmcJobInc : boolean
                              This OPTION includes information for BMP jobs with the specified job names and omits information for all other jobs that CFA finds in the input logs.
                            • bmcJobExc : boolean
                              This OPTION omits information for BMP jobs with the specified job names and includes information for all other jobs that CFA finds in the input logs. For jobName, specify the name of each job to include or exclude. You can specify multiple names (separated by commas). You can use wildcards (* and %)
                            • bmcPsbInc : boolean
                              This OPTION includes information for BMP jobs with the specified PSB names and omits information for all other BMP jobs that CFA finds in the input logs
                            • bmcPsbExc : boolean
                              This OPTION omits information for BMP jobs with the specified PSB names and includes information for all other BMP jobs that CFA finds in the input logs. For psbName, specify the name of each PSB to include or exclude. You can specify multiple names (separated by commas). You can use wildcards (* and %)
                            • bmcChkfreq : boolean
                              You can use the CHKFREQ subkeyword in an APPCHECK expression to filter the information in the Application Checkpoint report, based on checkpoint frequency.
                            • bmcThresh : boolean
                              You can use the THRESH subkeyword in an APPCHECK expression to specify the time unit to use for the threshold value in a checkpoint frequency filter. Valid values are MIN (minutes) and SEC (seconds). If you omit the THRESH subkeyword, CFA uses the default value MIN.
                            • bmcPrilog : boolean

                              You can use the PRILOG keyword on the ANALYZE control statement to specify the logs type associated with the input RECON data set (or data sets) to use as input to the analysis process.
                              You can select one of the following values:

                              • SLDS - Process SLDS associated with the input RECON data set (or data sets).
                              • DLI - Process DLI datasets associated with the input RECON data set (or data sets).
                              • BOTH - Process SLDS and DLI datasets associated with the input RECON data set (or data sets).
                              Note:
                              • If you omit the PRILOG option, Log Analyzer uses the default value SLDS.
                              • If you select the SLDS keyword, you cannot specify the PRILOG keyword. The PRILOG keyword applies only if CFA is reading RECON data sets to determine which log data sets to process.

                            • bmcAppcheck : boolean
                              You can use the APPCHECK keyword on the REPORTS control statement to control production of the Application Checkpoint report.
                            • bmcAll : boolean
                              To produce the Application Checkpoint report with default filters, specify APPCHECK=ALL. With this keyword, CFA includes all batch message processing (BMP) jobs that are found in the input logs, and does not filter the information by checkpoint frequency.
                            • bmcLsec : boolean
                              You can use the LSEC subkeyword in an APPCHECK expression to display the LUOW information with job duration of less than a second for jobs in the Application Checkpoint report.
                            • chkfreqval : String
                            • bmcPlanInc : boolean
                              This OPTION includes information for batch jobs with the specified Plan names and omits information for all other batch jobs that CFA finds in the input logs.
                            • planInclude : String
                            • bmcPlanExc : boolean
                              This OPTION omits information for batch jobs with the specified Plan names and includes information for all other batch jobs that CFA finds in the input logs. For PlanName, specify the name of each Plan to include or exclude. You can specify multiple names (separated by commas). You can use wildcards (* and %).
                            • planExclude : String
                            • bmcSortby : boolean
                              You can use the SORTBY subkeyword in an APPCHECK expression to sort the information in the Application Checkpoint report, based on either checkpoint frequency or start time.
                            • bmcCsv : boolean
                              You can use the CSVRPT subkeyword to create output file in CSV form. Log Analyzer writes the CSV reports to SYSOUT-type data sets.
                            • bmcFullreport : boolean
                              View Full report shows CSV file in MS excel application.
                          • BMC DevOps for BMC AMI Change Manager for IMS TM Plugin
                            • server : String
                              URL or IP address.
                            • port : String
                              z/OSMF Port
                            • user : String
                              z/OS user name
                            • pswd : String
                            • jclContent : String
                            • jclType : String
                            • dlist : String
                              The DELTA List PDS member name is also the DELTA List name. Any valid PDS member name is acceptable to BMC AMI Change Manager for IMS TM.
                            • jobCard : String
                            • acctno : String
                            • dPds : String
                              DELTA Lists for all BMC AMI Change Manager for IMS TM users are stored in the active DELTA List library (PDS).
                              The DELTA List PDS is normally allocated with RECFM=VB, LRECL=259, and BLKSIZE=23476. Although the block size could be shortened or lengthened as needed, half-track blocking is recommended.
                            • dOptionsPds : String

                              Specify the name of the data set where the BMC AMI Change Manager for IMS TM Global Options load module (DLP$GBL0) should be stored or retrieved.

                              It is recommended that you use the same data set that contains the IMSID options modules (DLP#iiii), and Group options modules (DLPZgggg).

                              This data set should have been created during BMC AMI Change Manager for IMS TM installation. JCL to allocate this data set is included in the BMC AMI Change Manager for IMS TM control library.

                            • target : String
                              IMSID or GROUP NAME in which to execute the DELTA List.
                            • mode : String
                              Option 'Optimize execution', instructs DELTA PLUS to attempt execution of the ENTIRE DELTA List as a single unit-of-work in IMS. This is the recommended mode due to the speed in which the request is executed.

                              Note: You must select this option for a DELTA List that is defined as Dependent to execute in the fashion Dependent implies.

                              Option 'One element at a time', instructs BMC AMI Change Manager for IMS TM to execute the DELTA List sequentially, one element at a time. This mode is much slower than Optimize execution mode. However, there are certain occasions when one element at a time is desirable. For example, transactions T1, T2 and T3 all require the MAXRGN parameter be changed from 3 to 4. Since they must be stopped before they can be revised, you want them stopped for the shortest amount of time possible. With Optimized mode, ALL the /STOP commands are done BEFORE the DELTA revise is done, and ALL the /START commands are done AFTER the revise is done. Using 'One element at a time' mode, the /STOP is done for T1, T1 is revised, then the /START command for T1 is issued before any activity takes place for T2 or T3.

                              This mode contains suboption Pause after elements with errors which instructs BMC AMI Change Manager for IMS TM to stop the DELTA List execution when an error is encountered. For additional information on the Pause option, place the cursor on the phrase highlighted above, and press HELP (F1).

                            • ims_cmd : String

                              It will process an EXECUTE input record to insert an IMS Command Element into the Delta List PDS Member.

                              The EXECUTE input record format is as follows: EXECUTE /CMD Command_Parameters

                              e.g.: EXECUTE /STO PROG PGMD

                            • title : String
                              Title of the DELTA List. A maximum of 28 characters is allowed.
                            • notes : String
                              Notes for the Delta List Member
                            • dlistRecords
                                Array / List of Nested Object
                              • action : String
                              • elementType : String
                              • elementName : String
                              • ims_cmd : String
                              • appnewname : String
                              • appres : String
                              • dbnewname : String
                              • dbres : String
                              • acc : String
                              • auto : String
                              • rand : String
                              • randonly : String
                              • rldareas : String
                              • iovfext : String
                              • dbrelgsam : String
                              • dbcopyacb : String
                              • apprelgsam : String
                              • appcopyacb : String
                              • ty : String
                              • schd : String
                              • appfp : String
                              • dyn : String
                              • gpsb : String
                              • lang : String
                              • apptls : String
                              • rtcnewname : String
                              • rtcinq : String
                              • rtcpsbname : String
                              • psb : String
                              • trannewname : String
                              • wfi : String
                              • npri : String
                              • lpri : String
                              • lco : String
                              • mseg : String
                              • resp : String
                              • cl : String
                              • plc : String
                              • time : String
                              • para : String
                              • uschd : String
                              • traninq : String
                              • recv : String
                              • tranfp : String
                              • emhs : String
                              • mper : String
                              • uc : String
                              • edit : String
                              • lsid : String
                              • rsid : String
                              • spa : String
                              • spad : String
                              • segs : String
                              • oseg : String
                              • msc : String
                              • dc : String
                              • mreg : String
                              • ser : String
                              • aoi : String
                              • trantls : String
                              • exptm : String
                              • terminalmask : String
                              • terminalnewname : String
                              • sign : String
                              • ltermmask : String
                              • ltermnewname : String
                              • ass : String
                              • msn : String
                              • l61 : String
                              • subpoolmask : String
                              • subpoolnewname : String
                              • msg : String
                              • bmcAppNew : boolean
                              • bmcAppRes : boolean
                              • bmcDbNewname : boolean
                              • bmcDbRes : boolean
                              • bmcAcc : boolean
                              • bmcAuto : boolean
                              • bmcRand : boolean
                              • bmcRandOnly : boolean
                              • bmcRldAreas : boolean
                              • bmcIoVfExt : boolean
                              • bmcDbCopyAcb : boolean
                              • bmcDbRelGsam : boolean
                              • bmcAppCopyAcb : boolean
                              • bmcAppRelGsam : boolean
                              • bmcTy : boolean
                              • bmcSchd : boolean
                              • bmcAppFp : boolean
                              • bmcDyn : boolean
                              • bmcGpsb : boolean
                              • bmcLang : boolean
                              • bmcApptls : boolean
                              • bmcRtcsPsbName : boolean
                              • bmcRtcInq : boolean
                              • bmcRtcsNew : boolean
                              • bmcPsb : boolean
                              • bmcTranNewName : boolean
                              • bmcWfi : boolean
                              • bmcNpri : boolean
                              • bmcLpri : boolean
                              • bmcLco : boolean
                              • bmcMseg : boolean
                              • bmcResp : boolean
                              • bmcCl : boolean
                              • bmcPlc : boolean
                              • bmcTime : boolean
                              • bmcPara : boolean
                              • bmcUschd : boolean
                              • bmcTranInq : boolean
                              • bmcRecv : boolean
                              • bmcTranFp : boolean
                              • bmcEmhs : boolean
                              • bmcMper : boolean
                              • bmcUc : boolean
                              • bmcEdit : boolean
                              • bmcLsid : boolean
                              • bmcRsid : boolean
                              • bmcSpa : boolean
                              • bmcSpad : boolean
                              • bmcSegs : boolean
                              • bmcOseg : boolean
                              • bmcMsc : boolean
                              • bmcDc : boolean
                              • bmcMreg : boolean
                              • bmcSer : boolean
                              • bmcAoi : boolean
                              • bmcTls : boolean
                              • bmcExptm : boolean
                              • bmcTermMask : boolean
                              • bmcTermNew : boolean
                              • bmcSign : boolean
                              • bmcLtermMask : boolean
                              • bmcLtermNew : boolean
                              • bmcAss : boolean
                              • bmcMsn : boolean
                              • bmcL61 : boolean
                              • bmcSpMask : boolean
                              • bmcSpNewName : boolean
                              • bmcMsg : boolean
                            • dlpLoadLibs
                                Array / List of Nested Object
                              • lib : String
                            • vds : String
                              (Optional)
                              Specify the name of the member (the Variable Definition Set) in the Variable Definition Library that contains the variable definitions for this DELTA List. The Variable Definition Sets are members that contain the definitions for the symbolic variables used by BMC AMI Change Manager for IMS TM in DELTA List processing.
                            • goodRC : String
                              Any value that is above the acceptable return code will be considered as FAILURE.
                            • dependent : boolean
                            • mark : boolean

                              Select this field to inform BMC AMI Change Manager for IMS TM to execute Marked elements only.

                              A beneficial use of this function is a DELTA List containing many elements that has failed. Instead of creating another DELTA List that contains corrections for the failed element(s) from the previous DELTA List, simply correct the error(s) in the original DELTA List, Mark only those elements which require execution, and select the 'Execute Marked elements only' option at DELTA List execution.

                            • coord : boolean
                          • $class: 'BootPluginBuilder'
                            • tasks : String
                              Provide a valid boot task, this could be a built in task or a user defined. Try 'boot help' for list of tasks.
                            • jvmOpts : String
                              Specify JVM Options to be used within boot tasks.
                          • $class: 'BranchDestructionStep'
                            • project : String
                            • branch : String
                          • $class: 'BranchGenerationStep'
                            • projectConfig
                                Nested Object
                              • pipelineConfig
                                  Nested Object
                                • destructor : boolean
                                • authorisations : String
                                • branchSCMParameter : boolean
                                • branchParameters : String
                                • generationExtension : String
                                • pipelineGenerationExtension : String
                                • disableDslScript : boolean
                                • scriptDirectory : String
                                • namingStrategy
                                    Nested Object
                                  • projectFolderPath : String
                                  • branchFolderPath : String
                                  • projectSeedName : String
                                  • projectDestructorName : String
                                  • branchSeedName : String
                                  • branchStartName : String
                                  • branchName : String
                                  • ignoredBranchPrefixes : String
                                • eventStrategy
                                    Nested Object
                                  • delete : boolean
                                  • auto : boolean
                                  • trigger : boolean
                                  • commit : String
                              • project : String
                              • scmType : String
                              • scmUrl : String
                              • scmCredentials : String
                              • triggerIdentifier : String
                              • triggerType : String
                              • triggerSecret : String
                          • dotnetBuild
                            The dotnet build command builds the project and its dependencies into a set of binaries. The binaries include the project's code in Intermediate Language (IL) files with a .dll extension. Depending on the project type and settings, other files may be included, such as:
                            1. An executable that can be used to run the application, if the project type is an executable targeting .NET Core 3.0 or later.
                            2. Symbol files used for debugging, with a .pdb extension.
                            3. A .deps.json file, which lists the dependencies of the application or library.
                            4. A .runtimeconfig.json file, which specifies the shared runtime and its version for an application.
                            5. Other libraries that the project depends on (via project references or NuGet package references).
                            • charset : String (optional)
                              The character set to use for the step's output. If not specified, the charset associated with the build will be used.
                            • configuration : String (optional)
                              Defines the build configuration. The default for most projects is Debug, but you can override the build configuration settings in your project.
                            • continueOnError : boolean (optional)
                              If this is checked, errors encountered will cause the build status to be set to FAILURE (or UNSTABLE, if configured that way), but the build will be allowed to continue. Otherwise, any such errors will cause the build to be terminated immediately.
                            • force : boolean (optional)
                              Forces all dependencies to be resolved even if the last restore was successful. Specifying this flag is the same as deleting the project.assets.json file.
                            • framework : String (optional)
                              Compiles for a specific framework. The framework must be defined in the project file.
                            • noDependencies : boolean (optional)
                              Ignores project-to-project references and only restores the root project.
                            • noIncremental : boolean (optional)
                              Marks the build as unsafe for incremental build. This flag turns off incremental compilation and forces a clean rebuild of the project's dependency graph.
                            • noRestore : boolean (optional)
                              Doesn't execute an implicit restore when running the command.
                            • nologo : boolean (optional)
                              Doesn't display the startup banner or the copyright message.

                              Available since: .NET Core SDK 3.0
                            • option : String (optional)
                            • options : Array / List of String (optional)
                              • optionsString : String (optional)
                                For more information about these options, see the MSBuild Command-Line Reference.
                                If targets and/or properties are also configured, those will be passed after these options.
                              • outputDirectory : String (optional)
                                Directory in which to place the built binaries. If not specified, the default path is ./bin/<configuration>/<framework>/. For projects with multiple target frameworks (via the TargetFrameworks property), you also need to specify a specific framework when you specify this option.
                              • project : String (optional)
                                The MSBuild project or solution to build. If a directory is specified, MSBuild searches it for a (single) file that has a file extension that ends in proj or sln, and uses that file. If nothing is specified, the current working directory is searched in the same way.
                              • properties (optional)
                                • Type: java.util.Map<java.lang.String, java.lang.String>
                              • propertiesString : String (optional)
                                Additional MSBuild properties to set. These should be specified one per line, in Java properties syntax.
                              • runtime : String (optional)
                                Specifies the target runtime. For a list of Runtime Identifiers (RIDs), see the RID catalog.
                              • sdk : String (optional)
                                Name of a .NET SDK to use so that dotnet will be in the path.
                                If the default is specified, you either need to use the With .NET element (or a withDotNet block in a pipeline script) to specify one, or ensure this step runs on a node that has a .NET SDK installed and in the path.
                              • showSdkInfo : boolean (optional)
                                If enabled, dotnet --info will be executed before the main command. This shows a list of available SDKs and runtimes, indicating which one is currently being used.
                              • shutDownBuildServers : boolean (optional)
                                If enabled, dotnet build-server shutdown will be executed after the main command, shutting down build servers that may have been started.
                                Note: If this is not specified, a build that causes such a build server to be started may hang until those server processes end. As such, it's recommended to specify this for the last .NET-related step in a job. If using multiple SDKs, each needs its own shutdown (e.g. the .NET Core 3.1 SDK will not shut down build servers from the .NET 5.0 SDK).

                                Available since: .NET Core SDK 2.1
                              • specificSdkVersion : boolean (optional)
                                Depending on the platform, the dotnet executable may use the most recent SDK available on the system, even when PATH is set up to find an older SDK deployment first; see this page for more information.
                                By enabling this option, the configured SDK home directory will be checked, and if it only includes a single SDK deployment, a global.json file will be created in the current directory, referencing that SDK version and disabling roll-forward.
                                Note: This will silently overwrite any global.json already present in the current directory.
                              • target : String (optional)
                              • targets : Array / List of String (optional)
                                • targetsString : String (optional)
                                  Specifies the MSBuild targets to build. If none are specified, the default target specified in the project will be built.
                                • unstableIfErrors : boolean (optional)
                                  If this is set and the build completes with errors, the build will be marked as unstable instead of failed, and execution will continue to the next step.
                                • unstableIfWarnings : boolean (optional)
                                  If this is set and the build completes with warnings (but no errors), the build will be marked as unstable instead of successful.
                                • verbosity : String (optional)
                                  Sets the MSBuild verbosity level.
                                • versionSuffix : String (optional)
                                  Sets the value of the $(VersionSuffix) property to use when building the project. This only works if the $(Version) property isn't set. Then, $(Version) is set to the $(VersionPrefix) combined with the $(VersionSuffix), separated by a dash.
                                • workDirectory : String (optional)
                                  The directory in which to execute the command. By default, this is the current directory (for freestyle jobs, that is the root of the job's workspace).
                              • buildAddUrl
                                • title : String
                                • url : String
                              • $class: 'BuildBuilder'
                                • dbFolder
                                    Nested Object
                                  • value
                                    • Values: vcsroot, subfolder, scaproject
                                  • subfolder : String
                                  • projectPath : String
                                • packageid : String
                                  Enter an ID for the build artifact you want to build. Typically, this will be the same as your database name.
                                • tempServer
                                    Nested Object
                                  • value : String
                                  • serverName : String
                                  • dbName : String
                                  • serverAuth
                                      Nested Object
                                    • value : String
                                    • username : String
                                    • password
                                      • Type: class hudson.util.Secret
                                  • encryptConnection : boolean
                                  • trustServerCertificate : boolean
                                • options : String
                                • dataOptions : String
                                • transactionIsolationLevel
                                  • Values: Serializable, Snapshot, RepeatableRead, ReadCommitted, ReadUncommitted
                                • filter : String
                                • packageVersion : String
                                  Optionally, set a custom package version. If this is left blank, the version 1.0.${BUILD_NUMBER} will be used.
                                • dlmDashboard
                                    Nested Object
                                  • dlmDashboardHost : String
                                  • dlmDashboardPort : String
                                • sqlChangeAutomationVersionOption
                                    Nested Object
                                  • value
                                    • Values: Latest, Specific
                                  • specificVersion : String
                              • buildDescription
                                Normally, build description is empty, but it can be changed by setting what name new build gets. This field can contain macros.
                                • descriptionTemplate : String
                              • buildName
                                Normally, builds are named by their sequential numbers, but you can change that here by setting what name new build gets. This field can contain macros.
                                • nameTemplate : String
                              • $class: 'BuildNameUpdater'
                                This plugin updates build name and description during the build process. Values to set could be stored in a file in the build workspace or in an environment variable.
                                • fromFile : boolean
                                • buildName : String
                                • fromMacro : boolean
                                • macroTemplate : String
                                • macroFirst : boolean
                              • crxBuild
                                Create and build a content package on CRX by specifying a workspace filter, and then download it to the workspace to get archived as a backup, or as the beginning of a magical content package adventure, full of drama, suspense, and deployments to lower environments!
                                • packageId : String (optional)
                                  Specify a list of package IDs to replicate from each specified Base URL. Each package ID string must occupy its own line.

                                  A Package ID consists of the group, the name, and the version of a package, separated by colons (':'), as in: "group:name:version". The version may be omitted.

                                  This field supports parameter tokens.
                                • baseUrl : String (optional)
                                  Specify the base URL of the Adobe Granite server, including hostname and port. The CRX Package Manager service path will be appended to this value for all requests. For example, http://localhost:4502 or https://author.mycorp.com, etc.

                                  If login credentials for the server are different than those configured in the Connection Options section, you may override them in the Base URL by inserting username[:password]@ between the scheme and the hostname.

                                  For example, to override the Username without changing the associated password or private key, you may use the following form:

                                  http://deployer@localhost:4502

                                  To override the credentials completely, provide a username and password (which may be provided by an encrypted parameter) by separating them with a colon, as shown below:
                                  http://deployer:Password123@localhost:4502

                                  This field supports parameter tokens.
                                • credentialsId : String (optional)
                                  Select the login credentials for authenticating requests to the CRX server.

                                  [Signature] credentials may be used if the target server supports HTTP Signature Authentication using the keyId format, /$username/keys/$fingerprint.

                                  Select "-none-" to use the default credentials set in the global CRX Content Package Deployer - HTTP Client configuration.
                                • download : boolean (optional)
                                  Check this box to download the package after building it.
                                • localDirectory : String (optional)
                                  Specify a path relative to the workspace where the package will be downloaded (if the "Download" box is checked).

                                  This field supports parameter tokens.
                                • requestTimeout : long (optional)
                                  Specify the timeout in milliseconds to wait for a response for each individual request. Specify a value of 0 to use default behavior.
                                • serviceTimeout : long (optional)
                                  Specify the timeout in milliseconds to wait for PackageManager service availability between sending POST requests. Specify a value of 0 to use default behavior.
                                • waitDelay : long (optional)
                                  Specify a delay in milliseconds before calls to check for Package Manager service availability. Increase this value if a /crx/packmgr node is sometimes created in the repository by this step, indicating that the Package Manager servlet was brought down for bundle installation AFTER a successful check for service availability, but BEFORE the next POST request was sent. What happens is that the SlingPostServlet takes over when the crx-packagemgr bundle is refreshed and creates nodes for any POST requests that it handles. Increasing this delay gives more time for the bundle refresh process to begin on the server.
                                • wspFilter : String (optional)
                                  Specify a package workspace filter in a simple text format that will be applied to the package before build. This defines what content will be captured by the package.

                                  Simple spec is defined simply as a line-by-line format where:
                                  • each line consists of significant text before an optional comment character (#)
                                  • each line that begins with a "/" begins a new filter root.
                                  • the first non-empty, non-comment line must define a new filter root
                                  • each non-empty, non-comment line after a filter root that begins with a "+" or "-" defines an include or exclude rule, respectively. Everything following the "+" or "-" must be a valid regular expression
                                  Content is "covered" by a filter root if the content path starts with, or is the same as the filter root path. Once the "covering" filter root is identified, its include/exclude rules are evaluated from top to bottom, by matching the content path against each rule pattern (which is a Java regular expression). The last rule whose pattern matches the content path defines whether that content is included (line starts with "+") or excluded (line starts with "-"). If no rules are defined, all content covered by that root path is included

                                  For example, to include everything under /etc except for packages:

                                          /etc                 # define /etc as the filter root
                                          +/etc(/.*)?          # include everything under /etc
                                          -/etc/packages(/.)?  # exclude package paths
                                      
                                  To create a package for a project "acme" defined in CRX DE Lite, a filter may look like this:

                                          /content/acme        # include the site content
                                          /apps/acme           # include the app code
                                      
                                  This field supports parameter tokens.
                              • $class: 'BuildScanner'
                                Trigger automated Acunetix scans as part of your web application's build process
                                • profile : String
                                  The Scan Type used to scan the target
                                • target : String
                                  The Scan Target on which to run a scan (excludes Targets requiring Manual Intervention)
                                • repTemp : String
                                  Generate a Report after the scan completes. The report is available for download from Acunetix backend within a time frame of one hour
                                • threat : String
                                  The Threat Level (High, Medium, Low) to fail the build on
                                • stopScan : boolean
                                  If selected, the scan will be stopped if the build fails (Threat Level is reached)
                                • svRep : boolean
                                  Option to download the report in the project workspace from where it can be used for other operations like attaching to an email or archiving.
                                  Note: Archiving can be done with "Archive the artifacts" post-build action
                                • incScan : boolean
                                  This will create an Incremental scan. The first scan will scan all the site. Subsequent scans will only scan the changes in the site, resulting in smaller scans.
                                • incScanId : String
                                • stopTargetScans : boolean
                                  This is useful when older versions of the web application are discarded by the CI/CD when an updated version is created.
                              • $class: 'BuildStepBuilder'
                                • sourceFolderMode : String
                                • subfolder : String
                                • packageId : String
                                • serverType : String
                                • server : String
                                • authenticationType : String
                                • userName : String
                                • password
                                  • Type: class hudson.util.Secret
                                • database : String
                                • compareOptions : String (optional)
                                • filterFile : String (optional)
                                • transactionIsoLvl : String (optional)
                              • $class: 'BuildStepWithTimeout'
                                • buildStep : Build Step (hudson.tasks.BuildStep)
                                • strategy
                                    Nested Choice of Objects
                                  • $class: 'AbsoluteTimeOutStrategy'

                                    Terminate a build based on a fixed time-out period.

                                    • timeoutMinutes : String
                                      If configured, and if a build does not complete by the specified amount of time (in minutes; at least 3), then the build will be terminated automatically. This is useful if you have experienced infinite loops in your test, for example.
                                  • $class: 'DeadlineTimeOutStrategy'

                                    Terminate a build based on a deadline time specified in HH:MM:SS or HH:MM (24-hour time format).

                                    • deadlineTime : String
                                      If configured, and if a build does not complete by next deadline time (specified in 24-hour format as HH:MM:SS or HH:MM), then the build will be terminated automatically.
                                      Variable references are allowed to define deadline time.
                                    • deadlineToleranceInMinutes : int
                                      Period in minutes after the deadline time when a build should be immediately terminated. E.g. if deadline is defined as "13:50", tolerance as "5" minutes and build is scheduled to run at "13:52" it will be immediately terminated. However if it is scheduled at "13:56", build's deadline will be set at "13:50" of next day.
                                  • $class: 'ElasticTimeOutStrategy'

                                    Terminate a build based on a specified percentage of the mean of the duration of the n most recent non-failing builds.

                                    • timeoutPercentage : String
                                      If a build takes longer than this percentage of the n most recent non-failing builds, the build will be terminated. If there are no such builds, the "Timeout minutes" field will be used instead.
                                    • timeoutMinutesElasticDefault : String
                                    • numberOfBuilds : String
                                    • failSafeTimeoutDuration : boolean
                                  • $class: 'LikelyStuckTimeOutStrategy'

                                    Terminate a build when it has taken many times longer than previous ones.

                                    • $class: 'NoActivityTimeOutStrategy'
                                      Terminate a build when there has not been any log output since the last n seconds.
                                      • timeoutSecondsString : String
                                        Seconds to detect timeout since the last log output. This is useful to terminate a build if there has not been any activity for a long time. Be careful with log output delay for buffering.
                                    • $class: 'RunConditionTimeoutStrategy'
                                      Sets a conditional timeout. The strategy will take a timeout from a first matching condition. The default value will be used if all evaluations fail or return false.

                                      This extension uses run condition as condition sources.

                                      • conditions
                                          Array / List of Nested Object
                                        • condition
                                          A Run Condition to be evaluated.
                                            Nested Choice of Objects
                                          • $class: 'AlwaysRun'
                                            • $class: 'And'
                                              • conditions
                                                  Array / List of Nested Object
                                                • condition
                                                    Nested Choice of Objects
                                                  • $class: 'AlwaysRun'
                                                    • $class: 'And'
                                                    • $class: 'BatchFileCondition'
                                                      • command : String
                                                        The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                        If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                    • $class: 'BooleanCondition'
                                                      • token : String
                                                    • $class: 'CauseCondition'
                                                      Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                      • buildCause : String
                                                        The cause why the build was triggered. The following causes are supported:
                                                        • UserCause - the build was triggered by a manual interaction
                                                        • SCMTrigger - the build was triggered by a SCM change
                                                        • TimerTrigger - the build was triggered by a timer
                                                        • CLICause - the build was triggered by via CLI interface
                                                        • RemoteCause - the build was triggered via remote interface
                                                        • UpstreamCause - the build was triggered by an upstream project
                                                        The following causes are supported if the XTrigger plugin is installed:
                                                        • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                        • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                        • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                        • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                        • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                      • exclusiveCause : boolean
                                                        There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                    • $class: 'DayCondition'
                                                      • useBuildTime : boolean
                                                        Use the build time instead of the the time that the condition is evaluated.

                                                        For long running builds, there can be a considerable difference between these two times.

                                                      • daySelector
                                                        For which days do you want the build to run?

                                                        Weekends
                                                        Saturday and Sunday
                                                        Weekdays
                                                        Not a weekend
                                                        Select days
                                                        Choose the days for which the build should run

                                                          Nested Choice of Objects
                                                        • $class: 'SelectDays'
                                                          • days
                                                              Array / List of Nested Object
                                                            • day : int
                                                            • selected : boolean
                                                        • $class: 'Weekday'
                                                          • $class: 'Weekend'
                                                        • $class: 'ExpressionCondition'
                                                          • expression : String
                                                            The regular expression used to match the label - Java regular expression syntax
                                                          • label : String
                                                            The label that will be tested by the regular expression
                                                        • $class: 'ExtendedCauseCondition'
                                                          • condition
                                                              Nested Choice of Objects
                                                            • $class: 'UpstreamCauseCondition'
                                                              • projects : String
                                                                Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                            • $class: 'UserBuildCauseCondition'
                                                              • users : String
                                                                Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                          • exclusiveCause : boolean
                                                            There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                        • $class: 'FileExistsCondition'
                                                          • file : String
                                                          • baseDir
                                                              Nested Choice of Objects
                                                            • $class: 'ArtifactsDir'
                                                              • $class: 'JenkinsHome'
                                                                • $class: 'Workspace'
                                                              • $class: 'FilesMatchCondition'
                                                                • includes : String
                                                                • excludes : String
                                                                • baseDir
                                                                    Nested Choice of Objects
                                                                  • $class: 'ArtifactsDir'
                                                                    • $class: 'JenkinsHome'
                                                                      • $class: 'Workspace'
                                                                    • $class: 'LegacyBuildstepCondition'
                                                                      • condition : String
                                                                      • invert : boolean
                                                                    • $class: 'NeverRun'
                                                                      • $class: 'NodeCondition'
                                                                        • allowedNodes : Array / List of String
                                                                        • $class: 'Not'
                                                                          • condition
                                                                              Nested Choice of Objects
                                                                            • $class: 'AlwaysRun'
                                                                              • $class: 'And'
                                                                              • $class: 'BatchFileCondition'
                                                                                • command : String
                                                                                  The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                  If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                              • $class: 'BooleanCondition'
                                                                                • token : String
                                                                              • $class: 'CauseCondition'
                                                                                Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                • buildCause : String
                                                                                  The cause why the build was triggered. The following causes are supported:
                                                                                  • UserCause - the build was triggered by a manual interaction
                                                                                  • SCMTrigger - the build was triggered by a SCM change
                                                                                  • TimerTrigger - the build was triggered by a timer
                                                                                  • CLICause - the build was triggered by via CLI interface
                                                                                  • RemoteCause - the build was triggered via remote interface
                                                                                  • UpstreamCause - the build was triggered by an upstream project
                                                                                  The following causes are supported if the XTrigger plugin is installed:
                                                                                  • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                  • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                  • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                  • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                  • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                • exclusiveCause : boolean
                                                                                  There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                              • $class: 'DayCondition'
                                                                                • useBuildTime : boolean
                                                                                  Use the build time instead of the the time that the condition is evaluated.

                                                                                  For long running builds, there can be a considerable difference between these two times.

                                                                                • daySelector
                                                                                  For which days do you want the build to run?

                                                                                  Weekends
                                                                                  Saturday and Sunday
                                                                                  Weekdays
                                                                                  Not a weekend
                                                                                  Select days
                                                                                  Choose the days for which the build should run

                                                                                    Nested Choice of Objects
                                                                                  • $class: 'SelectDays'
                                                                                    • days
                                                                                        Array / List of Nested Object
                                                                                      • day : int
                                                                                      • selected : boolean
                                                                                  • $class: 'Weekday'
                                                                                    • $class: 'Weekend'
                                                                                  • $class: 'ExpressionCondition'
                                                                                    • expression : String
                                                                                      The regular expression used to match the label - Java regular expression syntax
                                                                                    • label : String
                                                                                      The label that will be tested by the regular expression
                                                                                  • $class: 'ExtendedCauseCondition'
                                                                                    • condition
                                                                                        Nested Choice of Objects
                                                                                      • $class: 'UpstreamCauseCondition'
                                                                                        • projects : String
                                                                                          Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                      • $class: 'UserBuildCauseCondition'
                                                                                        • users : String
                                                                                          Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                    • exclusiveCause : boolean
                                                                                      There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                  • $class: 'FileExistsCondition'
                                                                                    • file : String
                                                                                    • baseDir
                                                                                        Nested Choice of Objects
                                                                                      • $class: 'ArtifactsDir'
                                                                                        • $class: 'JenkinsHome'
                                                                                          • $class: 'Workspace'
                                                                                        • $class: 'FilesMatchCondition'
                                                                                          • includes : String
                                                                                          • excludes : String
                                                                                          • baseDir
                                                                                              Nested Choice of Objects
                                                                                            • $class: 'ArtifactsDir'
                                                                                              • $class: 'JenkinsHome'
                                                                                                • $class: 'Workspace'
                                                                                              • $class: 'LegacyBuildstepCondition'
                                                                                                • condition : String
                                                                                                • invert : boolean
                                                                                              • $class: 'NeverRun'
                                                                                                • $class: 'NodeCondition'
                                                                                                  • allowedNodes : Array / List of String
                                                                                                  • $class: 'Not'
                                                                                                  • $class: 'NumericalComparisonCondition'
                                                                                                    • lhs : String
                                                                                                    • rhs : String
                                                                                                    • comparator
                                                                                                        Nested Choice of Objects
                                                                                                      • $class: 'EqualTo'
                                                                                                        • $class: 'GreaterThan'
                                                                                                          • $class: 'GreaterThanOrEqualTo'
                                                                                                            • $class: 'LessThan'
                                                                                                              • $class: 'LessThanOrEqualTo'
                                                                                                                • $class: 'NotEqualTo'
                                                                                                              • $class: 'OntrackDSLRunCondition'
                                                                                                                • ontrackScriptLocation
                                                                                                                    Nested Object
                                                                                                                  • value : String
                                                                                                                  • scriptPath : String
                                                                                                                  • scriptText : String
                                                                                                                • sandbox : boolean
                                                                                                                  If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                • injectEnvironment : String
                                                                                                                  Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                  For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                          ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                      
                                                                                                                • injectProperties : String

                                                                                                                  You can define variables to inject into the script by using a property-like format.

                                                                                                                  For example, the following text:

                                                                                                                          BRANCH = 1.0
                                                                                                                          BUILD = ${VERSION}
                                                                                                                      

                                                                                                                  would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                          ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                      

                                                                                                                  In the text:

                                                                                                                  • declare properties using name = value syntax
                                                                                                                  • empty lines are ignored
                                                                                                                  • lines started by # are ignored
                                                                                                                  • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                • ontrackLog : boolean
                                                                                                                  If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                              • $class: 'Or'
                                                                                                                • conditions
                                                                                                                    Array / List of Nested Object
                                                                                                              • $class: 'ShellCondition'
                                                                                                                • command : String
                                                                                                                  Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                  By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                  As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                  A non-zero exit value will be treated as a false value

                                                                                                              • $class: 'StatusCondition'
                                                                                                                • worstResult : String
                                                                                                                  The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                • bestResult : String
                                                                                                                  The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                              • $class: 'StringsMatchCondition'
                                                                                                                • arg1 : String
                                                                                                                • arg2 : String
                                                                                                                • ignoreCase : boolean
                                                                                                                  Ignore the case of the strings when matching them
                                                                                                              • $class: 'TextFinderCondition'
                                                                                                                • fileSet : String
                                                                                                                • regexp : String
                                                                                                                • checkConsoleOutput : boolean
                                                                                                              • $class: 'TimeCondition'
                                                                                                                • earliest : String
                                                                                                                • latest : String
                                                                                                                • useBuildTime : boolean
                                                                                                                  Use the build time instead of the the time that the condition is evaluated.

                                                                                                                  For long running builds, there can be a considerable difference between these two times.

                                                                                                              • $class: 'VariableExistsCondition'
                                                                                                                • variableName : String
                                                                                                                  Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                          • $class: 'NumericalComparisonCondition'
                                                                                                            • lhs : String
                                                                                                            • rhs : String
                                                                                                            • comparator
                                                                                                                Nested Choice of Objects
                                                                                                              • $class: 'EqualTo'
                                                                                                                • $class: 'GreaterThan'
                                                                                                                  • $class: 'GreaterThanOrEqualTo'
                                                                                                                    • $class: 'LessThan'
                                                                                                                      • $class: 'LessThanOrEqualTo'
                                                                                                                        • $class: 'NotEqualTo'
                                                                                                                      • $class: 'OntrackDSLRunCondition'
                                                                                                                        • ontrackScriptLocation
                                                                                                                            Nested Object
                                                                                                                          • value : String
                                                                                                                          • scriptPath : String
                                                                                                                          • scriptText : String
                                                                                                                        • sandbox : boolean
                                                                                                                          If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                        • injectEnvironment : String
                                                                                                                          Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                          For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                  ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                              
                                                                                                                        • injectProperties : String

                                                                                                                          You can define variables to inject into the script by using a property-like format.

                                                                                                                          For example, the following text:

                                                                                                                                  BRANCH = 1.0
                                                                                                                                  BUILD = ${VERSION}
                                                                                                                              

                                                                                                                          would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                  ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                              

                                                                                                                          In the text:

                                                                                                                          • declare properties using name = value syntax
                                                                                                                          • empty lines are ignored
                                                                                                                          • lines started by # are ignored
                                                                                                                          • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                        • ontrackLog : boolean
                                                                                                                          If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                      • $class: 'Or'
                                                                                                                        • conditions
                                                                                                                            Array / List of Nested Object
                                                                                                                      • $class: 'ShellCondition'
                                                                                                                        • command : String
                                                                                                                          Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                          By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                          As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                          A non-zero exit value will be treated as a false value

                                                                                                                      • $class: 'StatusCondition'
                                                                                                                        • worstResult : String
                                                                                                                          The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                        • bestResult : String
                                                                                                                          The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                      • $class: 'StringsMatchCondition'
                                                                                                                        • arg1 : String
                                                                                                                        • arg2 : String
                                                                                                                        • ignoreCase : boolean
                                                                                                                          Ignore the case of the strings when matching them
                                                                                                                      • $class: 'TextFinderCondition'
                                                                                                                        • fileSet : String
                                                                                                                        • regexp : String
                                                                                                                        • checkConsoleOutput : boolean
                                                                                                                      • $class: 'TimeCondition'
                                                                                                                        • earliest : String
                                                                                                                        • latest : String
                                                                                                                        • useBuildTime : boolean
                                                                                                                          Use the build time instead of the the time that the condition is evaluated.

                                                                                                                          For long running builds, there can be a considerable difference between these two times.

                                                                                                                      • $class: 'VariableExistsCondition'
                                                                                                                        • variableName : String
                                                                                                                          Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                • $class: 'BatchFileCondition'
                                                                                                                  • command : String
                                                                                                                    The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                    If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                • $class: 'BooleanCondition'
                                                                                                                  • token : String
                                                                                                                • $class: 'CauseCondition'
                                                                                                                  Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                  • buildCause : String
                                                                                                                    The cause why the build was triggered. The following causes are supported:
                                                                                                                    • UserCause - the build was triggered by a manual interaction
                                                                                                                    • SCMTrigger - the build was triggered by a SCM change
                                                                                                                    • TimerTrigger - the build was triggered by a timer
                                                                                                                    • CLICause - the build was triggered by via CLI interface
                                                                                                                    • RemoteCause - the build was triggered via remote interface
                                                                                                                    • UpstreamCause - the build was triggered by an upstream project
                                                                                                                    The following causes are supported if the XTrigger plugin is installed:
                                                                                                                    • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                    • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                    • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                    • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                    • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                  • exclusiveCause : boolean
                                                                                                                    There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                • $class: 'DayCondition'
                                                                                                                  • useBuildTime : boolean
                                                                                                                    Use the build time instead of the the time that the condition is evaluated.

                                                                                                                    For long running builds, there can be a considerable difference between these two times.

                                                                                                                  • daySelector
                                                                                                                    For which days do you want the build to run?

                                                                                                                    Weekends
                                                                                                                    Saturday and Sunday
                                                                                                                    Weekdays
                                                                                                                    Not a weekend
                                                                                                                    Select days
                                                                                                                    Choose the days for which the build should run

                                                                                                                      Nested Choice of Objects
                                                                                                                    • $class: 'SelectDays'
                                                                                                                      • days
                                                                                                                          Array / List of Nested Object
                                                                                                                        • day : int
                                                                                                                        • selected : boolean
                                                                                                                    • $class: 'Weekday'
                                                                                                                      • $class: 'Weekend'
                                                                                                                    • $class: 'ExpressionCondition'
                                                                                                                      • expression : String
                                                                                                                        The regular expression used to match the label - Java regular expression syntax
                                                                                                                      • label : String
                                                                                                                        The label that will be tested by the regular expression
                                                                                                                    • $class: 'ExtendedCauseCondition'
                                                                                                                      • condition
                                                                                                                          Nested Choice of Objects
                                                                                                                        • $class: 'UpstreamCauseCondition'
                                                                                                                          • projects : String
                                                                                                                            Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                        • $class: 'UserBuildCauseCondition'
                                                                                                                          • users : String
                                                                                                                            Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                      • exclusiveCause : boolean
                                                                                                                        There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                    • $class: 'FileExistsCondition'
                                                                                                                      • file : String
                                                                                                                      • baseDir
                                                                                                                          Nested Choice of Objects
                                                                                                                        • $class: 'ArtifactsDir'
                                                                                                                          • $class: 'JenkinsHome'
                                                                                                                            • $class: 'Workspace'
                                                                                                                          • $class: 'FilesMatchCondition'
                                                                                                                            • includes : String
                                                                                                                            • excludes : String
                                                                                                                            • baseDir
                                                                                                                                Nested Choice of Objects
                                                                                                                              • $class: 'ArtifactsDir'
                                                                                                                                • $class: 'JenkinsHome'
                                                                                                                                  • $class: 'Workspace'
                                                                                                                                • $class: 'LegacyBuildstepCondition'
                                                                                                                                  • condition : String
                                                                                                                                  • invert : boolean
                                                                                                                                • $class: 'NeverRun'
                                                                                                                                  • $class: 'NodeCondition'
                                                                                                                                    • allowedNodes : Array / List of String
                                                                                                                                    • $class: 'Not'
                                                                                                                                      • condition
                                                                                                                                          Nested Choice of Objects
                                                                                                                                        • $class: 'AlwaysRun'
                                                                                                                                          • $class: 'And'
                                                                                                                                            • conditions
                                                                                                                                                Array / List of Nested Object
                                                                                                                                              • condition
                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                • $class: 'AlwaysRun'
                                                                                                                                                  • $class: 'And'
                                                                                                                                                  • $class: 'BatchFileCondition'
                                                                                                                                                    • command : String
                                                                                                                                                      The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                      If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                  • $class: 'BooleanCondition'
                                                                                                                                                    • token : String
                                                                                                                                                  • $class: 'CauseCondition'
                                                                                                                                                    Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                    • buildCause : String
                                                                                                                                                      The cause why the build was triggered. The following causes are supported:
                                                                                                                                                      • UserCause - the build was triggered by a manual interaction
                                                                                                                                                      • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                      • TimerTrigger - the build was triggered by a timer
                                                                                                                                                      • CLICause - the build was triggered by via CLI interface
                                                                                                                                                      • RemoteCause - the build was triggered via remote interface
                                                                                                                                                      • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                      The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                      • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                      • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                      • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                      • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                      • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                    • exclusiveCause : boolean
                                                                                                                                                      There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                  • $class: 'DayCondition'
                                                                                                                                                    • useBuildTime : boolean
                                                                                                                                                      Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                      For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                    • daySelector
                                                                                                                                                      For which days do you want the build to run?

                                                                                                                                                      Weekends
                                                                                                                                                      Saturday and Sunday
                                                                                                                                                      Weekdays
                                                                                                                                                      Not a weekend
                                                                                                                                                      Select days
                                                                                                                                                      Choose the days for which the build should run

                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                      • $class: 'SelectDays'
                                                                                                                                                        • days
                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                          • day : int
                                                                                                                                                          • selected : boolean
                                                                                                                                                      • $class: 'Weekday'
                                                                                                                                                        • $class: 'Weekend'
                                                                                                                                                      • $class: 'ExpressionCondition'
                                                                                                                                                        • expression : String
                                                                                                                                                          The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                        • label : String
                                                                                                                                                          The label that will be tested by the regular expression
                                                                                                                                                      • $class: 'ExtendedCauseCondition'
                                                                                                                                                        • condition
                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                          • $class: 'UpstreamCauseCondition'
                                                                                                                                                            • projects : String
                                                                                                                                                              Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                          • $class: 'UserBuildCauseCondition'
                                                                                                                                                            • users : String
                                                                                                                                                              Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                        • exclusiveCause : boolean
                                                                                                                                                          There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                      • $class: 'FileExistsCondition'
                                                                                                                                                        • file : String
                                                                                                                                                        • baseDir
                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                          • $class: 'ArtifactsDir'
                                                                                                                                                            • $class: 'JenkinsHome'
                                                                                                                                                              • $class: 'Workspace'
                                                                                                                                                            • $class: 'FilesMatchCondition'
                                                                                                                                                              • includes : String
                                                                                                                                                              • excludes : String
                                                                                                                                                              • baseDir
                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                • $class: 'ArtifactsDir'
                                                                                                                                                                  • $class: 'JenkinsHome'
                                                                                                                                                                    • $class: 'Workspace'
                                                                                                                                                                  • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                    • condition : String
                                                                                                                                                                    • invert : boolean
                                                                                                                                                                  • $class: 'NeverRun'
                                                                                                                                                                    • $class: 'NodeCondition'
                                                                                                                                                                      • allowedNodes : Array / List of String
                                                                                                                                                                      • $class: 'Not'
                                                                                                                                                                      • $class: 'NumericalComparisonCondition'
                                                                                                                                                                        • lhs : String
                                                                                                                                                                        • rhs : String
                                                                                                                                                                        • comparator
                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                          • $class: 'EqualTo'
                                                                                                                                                                            • $class: 'GreaterThan'
                                                                                                                                                                              • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                • $class: 'LessThan'
                                                                                                                                                                                  • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                    • $class: 'NotEqualTo'
                                                                                                                                                                                  • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                    • ontrackScriptLocation
                                                                                                                                                                                        Nested Object
                                                                                                                                                                                      • value : String
                                                                                                                                                                                      • scriptPath : String
                                                                                                                                                                                      • scriptText : String
                                                                                                                                                                                    • sandbox : boolean
                                                                                                                                                                                      If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                    • injectEnvironment : String
                                                                                                                                                                                      Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                      For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                              ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                          
                                                                                                                                                                                    • injectProperties : String

                                                                                                                                                                                      You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                      For example, the following text:

                                                                                                                                                                                              BRANCH = 1.0
                                                                                                                                                                                              BUILD = ${VERSION}
                                                                                                                                                                                          

                                                                                                                                                                                      would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                              ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                          

                                                                                                                                                                                      In the text:

                                                                                                                                                                                      • declare properties using name = value syntax
                                                                                                                                                                                      • empty lines are ignored
                                                                                                                                                                                      • lines started by # are ignored
                                                                                                                                                                                      • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                    • ontrackLog : boolean
                                                                                                                                                                                      If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                  • $class: 'Or'
                                                                                                                                                                                    • conditions
                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                  • $class: 'ShellCondition'
                                                                                                                                                                                    • command : String
                                                                                                                                                                                      Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                      By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                      As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                      A non-zero exit value will be treated as a false value

                                                                                                                                                                                  • $class: 'StatusCondition'
                                                                                                                                                                                    • worstResult : String
                                                                                                                                                                                      The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                    • bestResult : String
                                                                                                                                                                                      The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                  • $class: 'StringsMatchCondition'
                                                                                                                                                                                    • arg1 : String
                                                                                                                                                                                    • arg2 : String
                                                                                                                                                                                    • ignoreCase : boolean
                                                                                                                                                                                      Ignore the case of the strings when matching them
                                                                                                                                                                                  • $class: 'TextFinderCondition'
                                                                                                                                                                                    • fileSet : String
                                                                                                                                                                                    • regexp : String
                                                                                                                                                                                    • checkConsoleOutput : boolean
                                                                                                                                                                                  • $class: 'TimeCondition'
                                                                                                                                                                                    • earliest : String
                                                                                                                                                                                    • latest : String
                                                                                                                                                                                    • useBuildTime : boolean
                                                                                                                                                                                      Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                      For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                  • $class: 'VariableExistsCondition'
                                                                                                                                                                                    • variableName : String
                                                                                                                                                                                      Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                            • $class: 'BatchFileCondition'
                                                                                                                                                                              • command : String
                                                                                                                                                                                The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                            • $class: 'BooleanCondition'
                                                                                                                                                                              • token : String
                                                                                                                                                                            • $class: 'CauseCondition'
                                                                                                                                                                              Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                              • buildCause : String
                                                                                                                                                                                The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                              • exclusiveCause : boolean
                                                                                                                                                                                There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                            • $class: 'DayCondition'
                                                                                                                                                                              • useBuildTime : boolean
                                                                                                                                                                                Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                              • daySelector
                                                                                                                                                                                For which days do you want the build to run?

                                                                                                                                                                                Weekends
                                                                                                                                                                                Saturday and Sunday
                                                                                                                                                                                Weekdays
                                                                                                                                                                                Not a weekend
                                                                                                                                                                                Select days
                                                                                                                                                                                Choose the days for which the build should run

                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                • $class: 'SelectDays'
                                                                                                                                                                                  • days
                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                    • day : int
                                                                                                                                                                                    • selected : boolean
                                                                                                                                                                                • $class: 'Weekday'
                                                                                                                                                                                  • $class: 'Weekend'
                                                                                                                                                                                • $class: 'ExpressionCondition'
                                                                                                                                                                                  • expression : String
                                                                                                                                                                                    The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                  • label : String
                                                                                                                                                                                    The label that will be tested by the regular expression
                                                                                                                                                                                • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                  • condition
                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                    • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                      • projects : String
                                                                                                                                                                                        Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                    • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                      • users : String
                                                                                                                                                                                        Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                  • exclusiveCause : boolean
                                                                                                                                                                                    There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                • $class: 'FileExistsCondition'
                                                                                                                                                                                  • file : String
                                                                                                                                                                                  • baseDir
                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                    • $class: 'ArtifactsDir'
                                                                                                                                                                                      • $class: 'JenkinsHome'
                                                                                                                                                                                        • $class: 'Workspace'
                                                                                                                                                                                      • $class: 'FilesMatchCondition'
                                                                                                                                                                                        • includes : String
                                                                                                                                                                                        • excludes : String
                                                                                                                                                                                        • baseDir
                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                          • $class: 'ArtifactsDir'
                                                                                                                                                                                            • $class: 'JenkinsHome'
                                                                                                                                                                                              • $class: 'Workspace'
                                                                                                                                                                                            • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                              • condition : String
                                                                                                                                                                                              • invert : boolean
                                                                                                                                                                                            • $class: 'NeverRun'
                                                                                                                                                                                              • $class: 'NodeCondition'
                                                                                                                                                                                                • allowedNodes : Array / List of String
                                                                                                                                                                                                • $class: 'Not'
                                                                                                                                                                                                • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                  • lhs : String
                                                                                                                                                                                                  • rhs : String
                                                                                                                                                                                                  • comparator
                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                    • $class: 'EqualTo'
                                                                                                                                                                                                      • $class: 'GreaterThan'
                                                                                                                                                                                                        • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                          • $class: 'LessThan'
                                                                                                                                                                                                            • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                              • $class: 'NotEqualTo'
                                                                                                                                                                                                            • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                              • ontrackScriptLocation
                                                                                                                                                                                                                  Nested Object
                                                                                                                                                                                                                • value : String
                                                                                                                                                                                                                • scriptPath : String
                                                                                                                                                                                                                • scriptText : String
                                                                                                                                                                                                              • sandbox : boolean
                                                                                                                                                                                                                If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                              • injectEnvironment : String
                                                                                                                                                                                                                Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                        ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                    
                                                                                                                                                                                                              • injectProperties : String

                                                                                                                                                                                                                You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                For example, the following text:

                                                                                                                                                                                                                        BRANCH = 1.0
                                                                                                                                                                                                                        BUILD = ${VERSION}
                                                                                                                                                                                                                    

                                                                                                                                                                                                                would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                        ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                    

                                                                                                                                                                                                                In the text:

                                                                                                                                                                                                                • declare properties using name = value syntax
                                                                                                                                                                                                                • empty lines are ignored
                                                                                                                                                                                                                • lines started by # are ignored
                                                                                                                                                                                                                • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                              • ontrackLog : boolean
                                                                                                                                                                                                                If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                            • $class: 'Or'
                                                                                                                                                                                                              • conditions
                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                • condition
                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                  • $class: 'AlwaysRun'
                                                                                                                                                                                                                    • $class: 'And'
                                                                                                                                                                                                                      • conditions
                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                    • $class: 'BatchFileCondition'
                                                                                                                                                                                                                      • command : String
                                                                                                                                                                                                                        The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                        If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                    • $class: 'BooleanCondition'
                                                                                                                                                                                                                      • token : String
                                                                                                                                                                                                                    • $class: 'CauseCondition'
                                                                                                                                                                                                                      Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                      • buildCause : String
                                                                                                                                                                                                                        The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                        • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                        • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                        • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                        • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                        • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                        • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                        The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                        • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                        • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                        • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                        • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                        • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                      • exclusiveCause : boolean
                                                                                                                                                                                                                        There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                    • $class: 'DayCondition'
                                                                                                                                                                                                                      • useBuildTime : boolean
                                                                                                                                                                                                                        Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                        For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                      • daySelector
                                                                                                                                                                                                                        For which days do you want the build to run?

                                                                                                                                                                                                                        Weekends
                                                                                                                                                                                                                        Saturday and Sunday
                                                                                                                                                                                                                        Weekdays
                                                                                                                                                                                                                        Not a weekend
                                                                                                                                                                                                                        Select days
                                                                                                                                                                                                                        Choose the days for which the build should run

                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                        • $class: 'SelectDays'
                                                                                                                                                                                                                          • days
                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                            • day : int
                                                                                                                                                                                                                            • selected : boolean
                                                                                                                                                                                                                        • $class: 'Weekday'
                                                                                                                                                                                                                          • $class: 'Weekend'
                                                                                                                                                                                                                        • $class: 'ExpressionCondition'
                                                                                                                                                                                                                          • expression : String
                                                                                                                                                                                                                            The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                          • label : String
                                                                                                                                                                                                                            The label that will be tested by the regular expression
                                                                                                                                                                                                                        • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                          • condition
                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                            • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                              • projects : String
                                                                                                                                                                                                                                Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                            • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                              • users : String
                                                                                                                                                                                                                                Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                          • exclusiveCause : boolean
                                                                                                                                                                                                                            There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                        • $class: 'FileExistsCondition'
                                                                                                                                                                                                                          • file : String
                                                                                                                                                                                                                          • baseDir
                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                            • $class: 'ArtifactsDir'
                                                                                                                                                                                                                              • $class: 'JenkinsHome'
                                                                                                                                                                                                                                • $class: 'Workspace'
                                                                                                                                                                                                                              • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                • includes : String
                                                                                                                                                                                                                                • excludes : String
                                                                                                                                                                                                                                • baseDir
                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                  • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                    • $class: 'JenkinsHome'
                                                                                                                                                                                                                                      • $class: 'Workspace'
                                                                                                                                                                                                                                    • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                      • condition : String
                                                                                                                                                                                                                                      • invert : boolean
                                                                                                                                                                                                                                    • $class: 'NeverRun'
                                                                                                                                                                                                                                      • $class: 'NodeCondition'
                                                                                                                                                                                                                                        • allowedNodes : Array / List of String
                                                                                                                                                                                                                                        • $class: 'Not'
                                                                                                                                                                                                                                        • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                          • lhs : String
                                                                                                                                                                                                                                          • rhs : String
                                                                                                                                                                                                                                          • comparator
                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                            • $class: 'EqualTo'
                                                                                                                                                                                                                                              • $class: 'GreaterThan'
                                                                                                                                                                                                                                                • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                  • $class: 'LessThan'
                                                                                                                                                                                                                                                    • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                      • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                    • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                      • ontrackScriptLocation
                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                        • scriptPath : String
                                                                                                                                                                                                                                                        • scriptText : String
                                                                                                                                                                                                                                                      • sandbox : boolean
                                                                                                                                                                                                                                                        If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                      • injectEnvironment : String
                                                                                                                                                                                                                                                        Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                        For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                            
                                                                                                                                                                                                                                                      • injectProperties : String

                                                                                                                                                                                                                                                        You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                        For example, the following text:

                                                                                                                                                                                                                                                                BRANCH = 1.0
                                                                                                                                                                                                                                                                BUILD = ${VERSION}
                                                                                                                                                                                                                                                            

                                                                                                                                                                                                                                                        would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                            

                                                                                                                                                                                                                                                        In the text:

                                                                                                                                                                                                                                                        • declare properties using name = value syntax
                                                                                                                                                                                                                                                        • empty lines are ignored
                                                                                                                                                                                                                                                        • lines started by # are ignored
                                                                                                                                                                                                                                                        • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                      • ontrackLog : boolean
                                                                                                                                                                                                                                                        If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                    • $class: 'Or'
                                                                                                                                                                                                                                                    • $class: 'ShellCondition'
                                                                                                                                                                                                                                                      • command : String
                                                                                                                                                                                                                                                        Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                        By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                        As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                        A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                    • $class: 'StatusCondition'
                                                                                                                                                                                                                                                      • worstResult : String
                                                                                                                                                                                                                                                        The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                      • bestResult : String
                                                                                                                                                                                                                                                        The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                    • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                      • arg1 : String
                                                                                                                                                                                                                                                      • arg2 : String
                                                                                                                                                                                                                                                      • ignoreCase : boolean
                                                                                                                                                                                                                                                        Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                    • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                      • fileSet : String
                                                                                                                                                                                                                                                      • regexp : String
                                                                                                                                                                                                                                                      • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                    • $class: 'TimeCondition'
                                                                                                                                                                                                                                                      • earliest : String
                                                                                                                                                                                                                                                      • latest : String
                                                                                                                                                                                                                                                      • useBuildTime : boolean
                                                                                                                                                                                                                                                        Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                        For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                    • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                      • variableName : String
                                                                                                                                                                                                                                                        Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                              • $class: 'ShellCondition'
                                                                                                                                                                                                                                                • command : String
                                                                                                                                                                                                                                                  Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                  By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                  As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                  A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                              • $class: 'StatusCondition'
                                                                                                                                                                                                                                                • worstResult : String
                                                                                                                                                                                                                                                  The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                • bestResult : String
                                                                                                                                                                                                                                                  The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                              • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                • arg1 : String
                                                                                                                                                                                                                                                • arg2 : String
                                                                                                                                                                                                                                                • ignoreCase : boolean
                                                                                                                                                                                                                                                  Ignore the case of the strings when matching them
                                                                                                                                                                                                                                              • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                • fileSet : String
                                                                                                                                                                                                                                                • regexp : String
                                                                                                                                                                                                                                                • checkConsoleOutput : boolean
                                                                                                                                                                                                                                              • $class: 'TimeCondition'
                                                                                                                                                                                                                                                • earliest : String
                                                                                                                                                                                                                                                • latest : String
                                                                                                                                                                                                                                                • useBuildTime : boolean
                                                                                                                                                                                                                                                  Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                  For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                              • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                • variableName : String
                                                                                                                                                                                                                                                  Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                          • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                            • lhs : String
                                                                                                                                                                                                                                            • rhs : String
                                                                                                                                                                                                                                            • comparator
                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                              • $class: 'EqualTo'
                                                                                                                                                                                                                                                • $class: 'GreaterThan'
                                                                                                                                                                                                                                                  • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                    • $class: 'LessThan'
                                                                                                                                                                                                                                                      • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                        • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                      • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                        • ontrackScriptLocation
                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                          • value : String
                                                                                                                                                                                                                                                          • scriptPath : String
                                                                                                                                                                                                                                                          • scriptText : String
                                                                                                                                                                                                                                                        • sandbox : boolean
                                                                                                                                                                                                                                                          If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                        • injectEnvironment : String
                                                                                                                                                                                                                                                          Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                          For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                  ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                              
                                                                                                                                                                                                                                                        • injectProperties : String

                                                                                                                                                                                                                                                          You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                          For example, the following text:

                                                                                                                                                                                                                                                                  BRANCH = 1.0
                                                                                                                                                                                                                                                                  BUILD = ${VERSION}
                                                                                                                                                                                                                                                              

                                                                                                                                                                                                                                                          would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                  ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                              

                                                                                                                                                                                                                                                          In the text:

                                                                                                                                                                                                                                                          • declare properties using name = value syntax
                                                                                                                                                                                                                                                          • empty lines are ignored
                                                                                                                                                                                                                                                          • lines started by # are ignored
                                                                                                                                                                                                                                                          • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                        • ontrackLog : boolean
                                                                                                                                                                                                                                                          If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                      • $class: 'Or'
                                                                                                                                                                                                                                                        • conditions
                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                          • condition
                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                            • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                              • $class: 'And'
                                                                                                                                                                                                                                                                • conditions
                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                              • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                • command : String
                                                                                                                                                                                                                                                                  The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                  If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                              • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                • token : String
                                                                                                                                                                                                                                                              • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                • buildCause : String
                                                                                                                                                                                                                                                                  The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                  • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                  • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                  • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                  • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                  • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                  • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                  The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                  • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                  • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                  • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                  • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                  • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                • exclusiveCause : boolean
                                                                                                                                                                                                                                                                  There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                              • $class: 'DayCondition'
                                                                                                                                                                                                                                                                • useBuildTime : boolean
                                                                                                                                                                                                                                                                  Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                  For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                • daySelector
                                                                                                                                                                                                                                                                  For which days do you want the build to run?

                                                                                                                                                                                                                                                                  Weekends
                                                                                                                                                                                                                                                                  Saturday and Sunday
                                                                                                                                                                                                                                                                  Weekdays
                                                                                                                                                                                                                                                                  Not a weekend
                                                                                                                                                                                                                                                                  Select days
                                                                                                                                                                                                                                                                  Choose the days for which the build should run

                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                  • $class: 'SelectDays'
                                                                                                                                                                                                                                                                    • days
                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                      • day : int
                                                                                                                                                                                                                                                                      • selected : boolean
                                                                                                                                                                                                                                                                  • $class: 'Weekday'
                                                                                                                                                                                                                                                                    • $class: 'Weekend'
                                                                                                                                                                                                                                                                  • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                    • expression : String
                                                                                                                                                                                                                                                                      The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                    • label : String
                                                                                                                                                                                                                                                                      The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                  • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                    • condition
                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                      • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                        • projects : String
                                                                                                                                                                                                                                                                          Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                      • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                        • users : String
                                                                                                                                                                                                                                                                          Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                    • exclusiveCause : boolean
                                                                                                                                                                                                                                                                      There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                  • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                    • file : String
                                                                                                                                                                                                                                                                    • baseDir
                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                      • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                        • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                          • $class: 'Workspace'
                                                                                                                                                                                                                                                                        • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                          • includes : String
                                                                                                                                                                                                                                                                          • excludes : String
                                                                                                                                                                                                                                                                          • baseDir
                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                            • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                              • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                • $class: 'Workspace'
                                                                                                                                                                                                                                                                              • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                • condition : String
                                                                                                                                                                                                                                                                                • invert : boolean
                                                                                                                                                                                                                                                                              • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                  • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                  • $class: 'Not'
                                                                                                                                                                                                                                                                                    • condition
                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                      • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                        • $class: 'And'
                                                                                                                                                                                                                                                                                          • conditions
                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                        • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                          • command : String
                                                                                                                                                                                                                                                                                            The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                            If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                        • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                          • token : String
                                                                                                                                                                                                                                                                                        • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                          Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                          • buildCause : String
                                                                                                                                                                                                                                                                                            The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                            • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                            • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                            • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                            • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                            • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                            • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                            The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                            • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                            • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                            • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                            • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                            • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                          • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                            There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                        • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                          • useBuildTime : boolean
                                                                                                                                                                                                                                                                                            Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                            For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                          • daySelector
                                                                                                                                                                                                                                                                                            For which days do you want the build to run?

                                                                                                                                                                                                                                                                                            Weekends
                                                                                                                                                                                                                                                                                            Saturday and Sunday
                                                                                                                                                                                                                                                                                            Weekdays
                                                                                                                                                                                                                                                                                            Not a weekend
                                                                                                                                                                                                                                                                                            Select days
                                                                                                                                                                                                                                                                                            Choose the days for which the build should run

                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                            • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                              • days
                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                • day : int
                                                                                                                                                                                                                                                                                                • selected : boolean
                                                                                                                                                                                                                                                                                            • $class: 'Weekday'
                                                                                                                                                                                                                                                                                              • $class: 'Weekend'
                                                                                                                                                                                                                                                                                            • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                              • expression : String
                                                                                                                                                                                                                                                                                                The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                              • label : String
                                                                                                                                                                                                                                                                                                The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                            • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                              • condition
                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                  • projects : String
                                                                                                                                                                                                                                                                                                    Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                  • users : String
                                                                                                                                                                                                                                                                                                    Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                              • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                            • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                              • file : String
                                                                                                                                                                                                                                                                                              • baseDir
                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                  • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                    • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                  • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                    • includes : String
                                                                                                                                                                                                                                                                                                    • excludes : String
                                                                                                                                                                                                                                                                                                    • baseDir
                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                      • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                        • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                          • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                        • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                          • condition : String
                                                                                                                                                                                                                                                                                                          • invert : boolean
                                                                                                                                                                                                                                                                                                        • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                          • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                            • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                            • $class: 'Not'
                                                                                                                                                                                                                                                                                                            • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                              • lhs : String
                                                                                                                                                                                                                                                                                                              • rhs : String
                                                                                                                                                                                                                                                                                                              • comparator
                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                  • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                    • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                      • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                        • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                          • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                        • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                          • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                            • value : String
                                                                                                                                                                                                                                                                                                                            • scriptPath : String
                                                                                                                                                                                                                                                                                                                            • scriptText : String
                                                                                                                                                                                                                                                                                                                          • sandbox : boolean
                                                                                                                                                                                                                                                                                                                            If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                          • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                            Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                            For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                    ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                          • injectProperties : String

                                                                                                                                                                                                                                                                                                                            You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                            For example, the following text:

                                                                                                                                                                                                                                                                                                                                    BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                    BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                

                                                                                                                                                                                                                                                                                                                            would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                    ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                

                                                                                                                                                                                                                                                                                                                            In the text:

                                                                                                                                                                                                                                                                                                                            • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                            • empty lines are ignored
                                                                                                                                                                                                                                                                                                                            • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                            • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                          • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                            If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                        • $class: 'Or'
                                                                                                                                                                                                                                                                                                                        • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                          • command : String
                                                                                                                                                                                                                                                                                                                            Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                            By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                            As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                            A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                        • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                          • worstResult : String
                                                                                                                                                                                                                                                                                                                            The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                          • bestResult : String
                                                                                                                                                                                                                                                                                                                            The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                        • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                          • arg1 : String
                                                                                                                                                                                                                                                                                                                          • arg2 : String
                                                                                                                                                                                                                                                                                                                          • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                            Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                        • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                          • fileSet : String
                                                                                                                                                                                                                                                                                                                          • regexp : String
                                                                                                                                                                                                                                                                                                                          • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                        • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                          • earliest : String
                                                                                                                                                                                                                                                                                                                          • latest : String
                                                                                                                                                                                                                                                                                                                          • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                            Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                            For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                        • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                          • variableName : String
                                                                                                                                                                                                                                                                                                                            Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                    • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                      • lhs : String
                                                                                                                                                                                                                                                                                                                      • rhs : String
                                                                                                                                                                                                                                                                                                                      • comparator
                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                        • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                          • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                            • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                              • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                  • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                  • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                    • value : String
                                                                                                                                                                                                                                                                                                                                    • scriptPath : String
                                                                                                                                                                                                                                                                                                                                    • scriptText : String
                                                                                                                                                                                                                                                                                                                                  • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                    If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                  • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                    Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                    For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                            ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                  • injectProperties : String

                                                                                                                                                                                                                                                                                                                                    You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                    For example, the following text:

                                                                                                                                                                                                                                                                                                                                            BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                            BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                        

                                                                                                                                                                                                                                                                                                                                    would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                            ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                        

                                                                                                                                                                                                                                                                                                                                    In the text:

                                                                                                                                                                                                                                                                                                                                    • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                    • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                    • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                    • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                  • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                    If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                  • command : String
                                                                                                                                                                                                                                                                                                                                    Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                    By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                    As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                    A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                  • worstResult : String
                                                                                                                                                                                                                                                                                                                                    The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                  • bestResult : String
                                                                                                                                                                                                                                                                                                                                    The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                  • arg1 : String
                                                                                                                                                                                                                                                                                                                                  • arg2 : String
                                                                                                                                                                                                                                                                                                                                  • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                    Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                  • fileSet : String
                                                                                                                                                                                                                                                                                                                                  • regexp : String
                                                                                                                                                                                                                                                                                                                                  • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                  • earliest : String
                                                                                                                                                                                                                                                                                                                                  • latest : String
                                                                                                                                                                                                                                                                                                                                  • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                    Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                    For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                  • variableName : String
                                                                                                                                                                                                                                                                                                                                    Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                          • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                            • command : String
                                                                                                                                                                                                                                                                                                                              Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                              By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                              As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                              A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                          • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                            • worstResult : String
                                                                                                                                                                                                                                                                                                                              The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                            • bestResult : String
                                                                                                                                                                                                                                                                                                                              The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                          • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                            • arg1 : String
                                                                                                                                                                                                                                                                                                                            • arg2 : String
                                                                                                                                                                                                                                                                                                                            • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                              Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                          • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                            • fileSet : String
                                                                                                                                                                                                                                                                                                                            • regexp : String
                                                                                                                                                                                                                                                                                                                            • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                          • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                            • earliest : String
                                                                                                                                                                                                                                                                                                                            • latest : String
                                                                                                                                                                                                                                                                                                                            • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                              Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                              For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                          • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                            • variableName : String
                                                                                                                                                                                                                                                                                                                              Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                        • timeout : long
                                                                                                                                                                                                                                                                                                                          Timeout in minutes, which will be set if the condition above returns true.
                                                                                                                                                                                                                                                                                                                      • defaultTimeout : long
                                                                                                                                                                                                                                                                                                                        A default timeout in minutes. This value will be used if all condition evaluations fail or return false.
                                                                                                                                                                                                                                                                                                                  • operationList
                                                                                                                                                                                                                                                                                                                      Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                    • $class: 'AbortAndRestartOperation'
                                                                                                                                                                                                                                                                                                                      • maxRestarts : String
                                                                                                                                                                                                                                                                                                                        Count of maximum restarts. 0 means without a limit.
                                                                                                                                                                                                                                                                                                                    • $class: 'AbortOperation'
                                                                                                                                                                                                                                                                                                                      Abort the build. This is a default operation performed if no operations are specified.
                                                                                                                                                                                                                                                                                                                      • $class: 'BuildStepOperation'
                                                                                                                                                                                                                                                                                                                        Perform a build step or a post-build action as a timeout action.
                                                                                                                                                                                                                                                                                                                        This never ensure all build steps and post-build actions works correct.
                                                                                                                                                                                                                                                                                                                        • buildstep : Build Step (hudson.tasks.BuildStep)
                                                                                                                                                                                                                                                                                                                        • continueEvenFailed : boolean
                                                                                                                                                                                                                                                                                                                          Continue subsequent timeout actions even when the build step failed. If unchecked, subsequent timeout actions is not executed, and the build will be marked as failure.
                                                                                                                                                                                                                                                                                                                        • createLauncher : boolean
                                                                                                                                                                                                                                                                                                                          Build steps like "Execute shell", "Execute Windows batch command" and so on, requires Launcher object to execute an external program. Build Timeout does not provide Launcher for build steps by default and those build steps fail. Checking here provides the build step a new created Launcher. You should not check here as long as the build step can run without this (that is, it does not require an external program).
                                                                                                                                                                                                                                                                                                                      • $class: 'FailOperation'
                                                                                                                                                                                                                                                                                                                        The build will be marked as failed.
                                                                                                                                                                                                                                                                                                                        • $class: 'WriteDescriptionOperation'
                                                                                                                                                                                                                                                                                                                          Writing the build description.
                                                                                                                                                                                                                                                                                                                          • description : String
                                                                                                                                                                                                                                                                                                                            A description to set. {0} will be replaced with timeout minutes.
                                                                                                                                                                                                                                                                                                                    • $class: 'BuildStepsFromJsonBuilder'
                                                                                                                                                                                                                                                                                                                    • $class: 'BuildoutBuilder'
                                                                                                                                                                                                                                                                                                                      • pythonName : String
                                                                                                                                                                                                                                                                                                                      • buildoutCfg : String
                                                                                                                                                                                                                                                                                                                      • nature : String
                                                                                                                                                                                                                                                                                                                      • command : String
                                                                                                                                                                                                                                                                                                                      • ignoreExitCode : boolean
                                                                                                                                                                                                                                                                                                                    • byteguardGreet
                                                                                                                                                                                                                                                                                                                      • token : String
                                                                                                                                                                                                                                                                                                                      • task_id : String
                                                                                                                                                                                                                                                                                                                    • $class: 'CFLaunchBuilder'
                                                                                                                                                                                                                                                                                                                      • cfComposition : String
                                                                                                                                                                                                                                                                                                                      • setCFVars
                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                        • vars
                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                          • Variable : String
                                                                                                                                                                                                                                                                                                                          • Value : String
                                                                                                                                                                                                                                                                                                                    • $class: 'CIMessageBuilder'
                                                                                                                                                                                                                                                                                                                      • providerData (optional)
                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                        • activeMQPublisher
                                                                                                                                                                                                                                                                                                                          • failOnError : boolean (optional)

                                                                                                                                                                                                                                                                                                                            Whether you want to fail the build if there is an error sending a message. By default, it is false.

                                                                                                                                                                                                                                                                                                                          • messageContent : String (optional)

                                                                                                                                                                                                                                                                                                                            Content of CI message to be sent. Environment variable values may be used in the content to allow customization of the message. Environment variables should use the familiar bash shell format, e.g. ${VARIABLE}.

                                                                                                                                                                                                                                                                                                                          • messageProperties : String (optional)

                                                                                                                                                                                                                                                                                                                            KEY=value pairs, one per line (Java properties file format) to be used as message properties. Backslashes are used for escaping, so use "\\" for a single backslash. Current build parameters and/or environment variables can be used in form: ${PARAM}.

                                                                                                                                                                                                                                                                                                                          • messageType (optional)

                                                                                                                                                                                                                                                                                                                            Type of CI message to be sent.

                                                                                                                                                                                                                                                                                                                            • Values: CodeQualityChecksDone, ComponentBuildDone, Custom, EarlyPerformanceTestingDone, EarlySecurityTestingDone, ImageUploaded, FunctionalTestCoverageDone, FunctionalTestingDone, NonfunctionalTestingDone, OotbTestingDone, PeerReviewDone, ProductAcceptedForReleaseTesting, ProductBuildDone, ProductBuildInStaging, ProductTestCoverageDone, PullRequest, SecurityChecksDone, TestingStarted, TestingCompleted, Tier0TestingDone, Tier1TestingDone, Tier2IntegrationTestingDone, Tier2ValidationTestingDone, Tier3TestingDone, UnitTestCoverageDone, UpdateDefectStatus
                                                                                                                                                                                                                                                                                                                          • name : String (optional)
                                                                                                                                                                                                                                                                                                                          • overrides (optional)
                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                            • topic : String (optional)
                                                                                                                                                                                                                                                                                                                            • queue : String (optional)
                                                                                                                                                                                                                                                                                                                        • activeMQSubscriber
                                                                                                                                                                                                                                                                                                                          • checks (optional)
                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                            • field : String
                                                                                                                                                                                                                                                                                                                            • expectedValue : String
                                                                                                                                                                                                                                                                                                                          • name : String (optional)
                                                                                                                                                                                                                                                                                                                          • overrides (optional)
                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                            • topic : String (optional)
                                                                                                                                                                                                                                                                                                                            • queue : String (optional)
                                                                                                                                                                                                                                                                                                                          • selector : String (optional)

                                                                                                                                                                                                                                                                                                                            JMS selector to choose messages that will fire the trigger.

                                                                                                                                                                                                                                                                                                                          • timeout : int (optional)

                                                                                                                                                                                                                                                                                                                            Value (in minutes) to wait for a message matching the specified JMS selector.

                                                                                                                                                                                                                                                                                                                          • variable : String (optional)

                                                                                                                                                                                                                                                                                                                            Environment variable to hold received message content.

                                                                                                                                                                                                                                                                                                                        • fedmsgPublisher
                                                                                                                                                                                                                                                                                                                          • failOnError : boolean (optional)

                                                                                                                                                                                                                                                                                                                            Whether you want to fail the build if there is an error sending a message. By default, it is false.

                                                                                                                                                                                                                                                                                                                          • messageContent : String (optional)

                                                                                                                                                                                                                                                                                                                            Content of CI message to be sent at job completion. Environment variable values may be used in the content to allow customization of the message. Environment variables should use the familiar bash shell format, e.g. ${VARIABLE}.

                                                                                                                                                                                                                                                                                                                          • name : String (optional)
                                                                                                                                                                                                                                                                                                                          • overrides (optional)
                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                            • topic : String (optional)
                                                                                                                                                                                                                                                                                                                            • queue : String (optional)
                                                                                                                                                                                                                                                                                                                        • fedmsgSubscriber
                                                                                                                                                                                                                                                                                                                          • checks (optional)
                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                            • field : String
                                                                                                                                                                                                                                                                                                                            • expectedValue : String
                                                                                                                                                                                                                                                                                                                          • name : String (optional)
                                                                                                                                                                                                                                                                                                                          • overrides (optional)
                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                            • topic : String (optional)
                                                                                                                                                                                                                                                                                                                            • queue : String (optional)
                                                                                                                                                                                                                                                                                                                          • timeout : int (optional)

                                                                                                                                                                                                                                                                                                                            Value (in minutes) to wait for a message matching the specified JMS selector.

                                                                                                                                                                                                                                                                                                                          • variable : String (optional)

                                                                                                                                                                                                                                                                                                                            Environment variable to hold received message content.

                                                                                                                                                                                                                                                                                                                        • rabbitMQPublisher
                                                                                                                                                                                                                                                                                                                          • failOnError : boolean (optional)

                                                                                                                                                                                                                                                                                                                            Whether you want to fail the build if there is an error sending a message. By default, it is false.

                                                                                                                                                                                                                                                                                                                          • fedoraMessaging : boolean (optional)
                                                                                                                                                                                                                                                                                                                          • messageContent : String (optional)

                                                                                                                                                                                                                                                                                                                            Content of CI message to be sent. Environment variable values may be used in the content to allow customization of the message. Environment variables should use the familiar bash shell format, e.g. ${VARIABLE}.

                                                                                                                                                                                                                                                                                                                          • name : String (optional)
                                                                                                                                                                                                                                                                                                                          • overrides (optional)
                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                            • topic : String (optional)
                                                                                                                                                                                                                                                                                                                            • queue : String (optional)
                                                                                                                                                                                                                                                                                                                          • schema : String (optional)

                                                                                                                                                                                                                                                                                                                            Path to message schema.

                                                                                                                                                                                                                                                                                                                          • severity : int (optional)

                                                                                                                                                                                                                                                                                                                            Severity of the message.

                                                                                                                                                                                                                                                                                                                        • rabbitMQSubscriber
                                                                                                                                                                                                                                                                                                                          • checks (optional)
                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                            • field : String
                                                                                                                                                                                                                                                                                                                            • expectedValue : String
                                                                                                                                                                                                                                                                                                                          • name : String (optional)
                                                                                                                                                                                                                                                                                                                          • overrides (optional)
                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                            • topic : String (optional)
                                                                                                                                                                                                                                                                                                                            • queue : String (optional)
                                                                                                                                                                                                                                                                                                                          • timeout : int (optional)

                                                                                                                                                                                                                                                                                                                            Value (in minutes) to wait for a message.

                                                                                                                                                                                                                                                                                                                          • variable : String (optional)

                                                                                                                                                                                                                                                                                                                            Environment variable to hold received message content.

                                                                                                                                                                                                                                                                                                                    • $class: 'CIMessageSubscriberBuilder'

                                                                                                                                                                                                                                                                                                                      Subscribe to the CI message bus and wait for a message matching the specified JMS selector.

                                                                                                                                                                                                                                                                                                                      The variable value specifies the name of an environment variable in which to place the received message body.

                                                                                                                                                                                                                                                                                                                      The timeout value specifies the maximum number of minutes to wait for a message matching the JMS selector to appear.

                                                                                                                                                                                                                                                                                                                      • providerData (optional)
                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                        • activeMQPublisher
                                                                                                                                                                                                                                                                                                                          • failOnError : boolean (optional)

                                                                                                                                                                                                                                                                                                                            Whether you want to fail the build if there is an error sending a message. By default, it is false.

                                                                                                                                                                                                                                                                                                                          • messageContent : String (optional)

                                                                                                                                                                                                                                                                                                                            Content of CI message to be sent. Environment variable values may be used in the content to allow customization of the message. Environment variables should use the familiar bash shell format, e.g. ${VARIABLE}.

                                                                                                                                                                                                                                                                                                                          • messageProperties : String (optional)

                                                                                                                                                                                                                                                                                                                            KEY=value pairs, one per line (Java properties file format) to be used as message properties. Backslashes are used for escaping, so use "\\" for a single backslash. Current build parameters and/or environment variables can be used in form: ${PARAM}.

                                                                                                                                                                                                                                                                                                                          • messageType (optional)

                                                                                                                                                                                                                                                                                                                            Type of CI message to be sent.

                                                                                                                                                                                                                                                                                                                            • Values: CodeQualityChecksDone, ComponentBuildDone, Custom, EarlyPerformanceTestingDone, EarlySecurityTestingDone, ImageUploaded, FunctionalTestCoverageDone, FunctionalTestingDone, NonfunctionalTestingDone, OotbTestingDone, PeerReviewDone, ProductAcceptedForReleaseTesting, ProductBuildDone, ProductBuildInStaging, ProductTestCoverageDone, PullRequest, SecurityChecksDone, TestingStarted, TestingCompleted, Tier0TestingDone, Tier1TestingDone, Tier2IntegrationTestingDone, Tier2ValidationTestingDone, Tier3TestingDone, UnitTestCoverageDone, UpdateDefectStatus
                                                                                                                                                                                                                                                                                                                          • name : String (optional)
                                                                                                                                                                                                                                                                                                                          • overrides (optional)
                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                            • topic : String (optional)
                                                                                                                                                                                                                                                                                                                            • queue : String (optional)
                                                                                                                                                                                                                                                                                                                        • activeMQSubscriber
                                                                                                                                                                                                                                                                                                                          • checks (optional)
                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                            • field : String
                                                                                                                                                                                                                                                                                                                            • expectedValue : String
                                                                                                                                                                                                                                                                                                                          • name : String (optional)
                                                                                                                                                                                                                                                                                                                          • overrides (optional)
                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                            • topic : String (optional)
                                                                                                                                                                                                                                                                                                                            • queue : String (optional)
                                                                                                                                                                                                                                                                                                                          • selector : String (optional)

                                                                                                                                                                                                                                                                                                                            JMS selector to choose messages that will fire the trigger.

                                                                                                                                                                                                                                                                                                                          • timeout : int (optional)

                                                                                                                                                                                                                                                                                                                            Value (in minutes) to wait for a message matching the specified JMS selector.

                                                                                                                                                                                                                                                                                                                          • variable : String (optional)

                                                                                                                                                                                                                                                                                                                            Environment variable to hold received message content.

                                                                                                                                                                                                                                                                                                                        • fedmsgPublisher
                                                                                                                                                                                                                                                                                                                          • failOnError : boolean (optional)

                                                                                                                                                                                                                                                                                                                            Whether you want to fail the build if there is an error sending a message. By default, it is false.

                                                                                                                                                                                                                                                                                                                          • messageContent : String (optional)

                                                                                                                                                                                                                                                                                                                            Content of CI message to be sent at job completion. Environment variable values may be used in the content to allow customization of the message. Environment variables should use the familiar bash shell format, e.g. ${VARIABLE}.

                                                                                                                                                                                                                                                                                                                          • name : String (optional)
                                                                                                                                                                                                                                                                                                                          • overrides (optional)
                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                            • topic : String (optional)
                                                                                                                                                                                                                                                                                                                            • queue : String (optional)
                                                                                                                                                                                                                                                                                                                        • fedmsgSubscriber
                                                                                                                                                                                                                                                                                                                          • checks (optional)
                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                            • field : String
                                                                                                                                                                                                                                                                                                                            • expectedValue : String
                                                                                                                                                                                                                                                                                                                          • name : String (optional)
                                                                                                                                                                                                                                                                                                                          • overrides (optional)
                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                            • topic : String (optional)
                                                                                                                                                                                                                                                                                                                            • queue : String (optional)
                                                                                                                                                                                                                                                                                                                          • timeout : int (optional)

                                                                                                                                                                                                                                                                                                                            Value (in minutes) to wait for a message matching the specified JMS selector.

                                                                                                                                                                                                                                                                                                                          • variable : String (optional)

                                                                                                                                                                                                                                                                                                                            Environment variable to hold received message content.

                                                                                                                                                                                                                                                                                                                        • rabbitMQPublisher
                                                                                                                                                                                                                                                                                                                          • failOnError : boolean (optional)

                                                                                                                                                                                                                                                                                                                            Whether you want to fail the build if there is an error sending a message. By default, it is false.

                                                                                                                                                                                                                                                                                                                          • fedoraMessaging : boolean (optional)
                                                                                                                                                                                                                                                                                                                          • messageContent : String (optional)

                                                                                                                                                                                                                                                                                                                            Content of CI message to be sent. Environment variable values may be used in the content to allow customization of the message. Environment variables should use the familiar bash shell format, e.g. ${VARIABLE}.

                                                                                                                                                                                                                                                                                                                          • name : String (optional)
                                                                                                                                                                                                                                                                                                                          • overrides (optional)
                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                            • topic : String (optional)
                                                                                                                                                                                                                                                                                                                            • queue : String (optional)
                                                                                                                                                                                                                                                                                                                          • schema : String (optional)

                                                                                                                                                                                                                                                                                                                            Path to message schema.

                                                                                                                                                                                                                                                                                                                          • severity : int (optional)

                                                                                                                                                                                                                                                                                                                            Severity of the message.

                                                                                                                                                                                                                                                                                                                        • rabbitMQSubscriber
                                                                                                                                                                                                                                                                                                                          • checks (optional)
                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                            • field : String
                                                                                                                                                                                                                                                                                                                            • expectedValue : String
                                                                                                                                                                                                                                                                                                                          • name : String (optional)
                                                                                                                                                                                                                                                                                                                          • overrides (optional)
                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                            • topic : String (optional)
                                                                                                                                                                                                                                                                                                                            • queue : String (optional)
                                                                                                                                                                                                                                                                                                                          • timeout : int (optional)

                                                                                                                                                                                                                                                                                                                            Value (in minutes) to wait for a message.

                                                                                                                                                                                                                                                                                                                          • variable : String (optional)

                                                                                                                                                                                                                                                                                                                            Environment variable to hold received message content.

                                                                                                                                                                                                                                                                                                                    • $class: 'CRDABuilder'
                                                                                                                                                                                                                                                                                                                      • file : String (optional)
                                                                                                                                                                                                                                                                                                                      • crdaKeyId : String (optional)
                                                                                                                                                                                                                                                                                                                      • cliVersion : String (optional)
                                                                                                                                                                                                                                                                                                                        You must provide the CRDA cli version for the analysis. To see all versions click on CRDA CLI . Check the Readme for the compatible versions with the plugin.
                                                                                                                                                                                                                                                                                                                      • consentTelemetry : boolean (optional)

                                                                                                                                                                                                                                                                                                                        CRDA CLI is constantly improving and we would like to know more about usage. Click here to find more details.

                                                                                                                                                                                                                                                                                                                    • execMan
                                                                                                                                                                                                                                                                                                                      • requestType : String (optional)
                                                                                                                                                                                                                                                                                                                      • altCTMConfig (optional)
                                                                                                                                                                                                                                                                                                                        Optional alternative Continuous Testing Manager configuration. If provided, these parameters override those specified in Jenkins global configuration.
                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                        • url : String
                                                                                                                                                                                                                                                                                                                        • credentials : String
                                                                                                                                                                                                                                                                                                                      • execParams (optional)
                                                                                                                                                                                                                                                                                                                        Optional execution request parameters. Both a key and value must be specified. The value can refer to Jenkins environment variables using this syntax - ${JENKINS_ENV_VAR}. For example - ${BUILD_ID}.
                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                        • list (optional)
                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                          • key : String
                                                                                                                                                                                                                                                                                                                          • value : String
                                                                                                                                                                                                                                                                                                                      • postExecute (optional)
                                                                                                                                                                                                                                                                                                                        Optional post execution action. To perform any post action, provide action name along with the need parameters.
                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                        • action : String
                                                                                                                                                                                                                                                                                                                        • params : String
                                                                                                                                                                                                                                                                                                                      • request (optional)
                                                                                                                                                                                                                                                                                                                        Select this to run a pre-defined Suite configured on the Continuous Testing Manager.
                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                        • name : String
                                                                                                                                                                                                                                                                                                                      • waitConfig (optional)
                                                                                                                                                                                                                                                                                                                        Optional execution request wait configuration. Both the polling interval and maximum run time must be specified in seconds.
                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                        • pollInterval : String
                                                                                                                                                                                                                                                                                                                        • maxRunTime : String
                                                                                                                                                                                                                                                                                                                    • $class: 'CToolBuilder'
                                                                                                                                                                                                                                                                                                                      Executes a tool of the CMake-suite with arbitrary command-line arguments.
                                                                                                                                                                                                                                                                                                                      Useful to run cmake in script mode (cmake -P <script file>) or command mode (cmake -E <command>).
                                                                                                                                                                                                                                                                                                                      • installationName : String
                                                                                                                                                                                                                                                                                                                      • arguments : String (optional)
                                                                                                                                                                                                                                                                                                                      • ignoredExitCodes : String (optional)
                                                                                                                                                                                                                                                                                                                      • toolId : String (optional)
                                                                                                                                                                                                                                                                                                                      • workingDir : String (optional)
                                                                                                                                                                                                                                                                                                                    • generateCache
                                                                                                                                                                                                                                                                                                                      Generate ECU-TEST file caches (A2L, ELF, Bus, Model and Service caches are supported).
                                                                                                                                                                                                                                                                                                                      • caches
                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                        • type
                                                                                                                                                                                                                                                                                                                          • Values: A2L, ELF, BUS, MODEL, SERVICE
                                                                                                                                                                                                                                                                                                                        • filePath : String
                                                                                                                                                                                                                                                                                                                        • dbChannel : String
                                                                                                                                                                                                                                                                                                                        • clear : boolean
                                                                                                                                                                                                                                                                                                                    • $class: 'CallFunction'
                                                                                                                                                                                                                                                                                                                      Call a function You can choose:
                                                                                                                                                                                                                                                                                                                      • Function name
                                                                                                                                                                                                                                                                                                                      • Function Arguments
                                                                                                                                                                                                                                                                                                                      • functionName : String (optional)
                                                                                                                                                                                                                                                                                                                      • argumentList : Array / List of String (optional)
                                                                                                                                                                                                                                                                                                                        • argument : String (optional)
                                                                                                                                                                                                                                                                                                                      • $class: 'CallOtherJenkinsBuilder'
                                                                                                                                                                                                                                                                                                                        • hostName : String
                                                                                                                                                                                                                                                                                                                        • jobName : String
                                                                                                                                                                                                                                                                                                                        • span : String
                                                                                                                                                                                                                                                                                                                        • retry : String
                                                                                                                                                                                                                                                                                                                        • userName : String
                                                                                                                                                                                                                                                                                                                        • password : String
                                                                                                                                                                                                                                                                                                                        • parameters : String
                                                                                                                                                                                                                                                                                                                      • $class: 'CaptureIOSDeviceScreenshot'
                                                                                                                                                                                                                                                                                                                        Captures a screen shot from each connected iOS device. The image will be stored in a TIFF file matching the device's UDID (e.g. 3c701dda15e238cf3f2831346067751a5c942297.tiff).
                                                                                                                                                                                                                                                                                                                        • url : String
                                                                                                                                                                                                                                                                                                                        • cloudTestServerID : String
                                                                                                                                                                                                                                                                                                                          Select the server to download iOSAppInstaller.zip from.
                                                                                                                                                                                                                                                                                                                        • additionalOptions : String
                                                                                                                                                                                                                                                                                                                          If you need to pass any other command line options to the iOSAppInstaller utility, specify them here. You can separate options with new lines as well as whitespaces.
                                                                                                                                                                                                                                                                                                                      • carbonetes
                                                                                                                                                                                                                                                                                                                        • name : String
                                                                                                                                                                                                                                                                                                                        • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                        • engineTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                        • failBuildOnPluginError : boolean (optional)
                                                                                                                                                                                                                                                                                                                        • failBuildOnPolicyEvaluationFailResult : boolean (optional)
                                                                                                                                                                                                                                                                                                                        • image : String (optional)
                                                                                                                                                                                                                                                                                                                        • policyBundleID : String (optional)
                                                                                                                                                                                                                                                                                                                        • registryURI : String (optional)
                                                                                                                                                                                                                                                                                                                      • carl
                                                                                                                                                                                                                                                                                                                        • installationName : String
                                                                                                                                                                                                                                                                                                                        • sourcePath : String
                                                                                                                                                                                                                                                                                                                        • applicationName : String
                                                                                                                                                                                                                                                                                                                        • archivePdf : boolean (optional)
                                                                                                                                                                                                                                                                                                                        • displayLog : boolean (optional)
                                                                                                                                                                                                                                                                                                                        • logPath : String (optional)
                                                                                                                                                                                                                                                                                                                        • outputPath : String (optional)
                                                                                                                                                                                                                                                                                                                        • qualityGate : String (optional)
                                                                                                                                                                                                                                                                                                                      • venafiVcertRequestCertificate
                                                                                                                                                                                                                                                                                                                        • connectorName : String
                                                                                                                                                                                                                                                                                                                        • zoneConfigName : String

                                                                                                                                                                                                                                                                                                                          The name of the zone configuration to use.

                                                                                                                                                                                                                                                                                                                          When using Venafi as a Service, zone names are in the format of app name\api alias

                                                                                                                                                                                                                                                                                                                        • commonName : String
                                                                                                                                                                                                                                                                                                                        • privKeyOutput : String
                                                                                                                                                                                                                                                                                                                        • certOutput : String
                                                                                                                                                                                                                                                                                                                        • certChainOutput : String
                                                                                                                                                                                                                                                                                                                        • country : String (optional)
                                                                                                                                                                                                                                                                                                                        • dnsNames (optional)
                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                          • hostName : String
                                                                                                                                                                                                                                                                                                                        • emailAddresses (optional)
                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                          • address : String
                                                                                                                                                                                                                                                                                                                        • expirationWindow : int (optional)
                                                                                                                                                                                                                                                                                                                          Number of hours before certificate expiry to request a new certificate.
                                                                                                                                                                                                                                                                                                                        • ipAddresses (optional)
                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                          • address : String
                                                                                                                                                                                                                                                                                                                        • keyType (optional)
                                                                                                                                                                                                                                                                                                                          • Values: RSA, ECDSA
                                                                                                                                                                                                                                                                                                                        • locality : String (optional)
                                                                                                                                                                                                                                                                                                                        • organization : String (optional)
                                                                                                                                                                                                                                                                                                                        • organizationalUnit : String (optional)
                                                                                                                                                                                                                                                                                                                        • province : String (optional)
                                                                                                                                                                                                                                                                                                                      • changeAsmVer
                                                                                                                                                                                                                                                                                                                        This build step can be used to change the version in the AssemblyInfo.cs file from a .NET Project, it's going to find every AssemblyInfo.cs file in the workspace and change the version from [AssemblyVersion] and [AssemblyFileVersion] attributes. It's recommended to use this plugin with the auto-generated AssemblyInfo.cs from VisualStudio.
                                                                                                                                                                                                                                                                                                                        • versionPattern : String
                                                                                                                                                                                                                                                                                                                        • assemblyCompany : String (optional)
                                                                                                                                                                                                                                                                                                                        • assemblyCopyright : String (optional)
                                                                                                                                                                                                                                                                                                                        • assemblyCulture : String (optional)
                                                                                                                                                                                                                                                                                                                        • assemblyDescription : String (optional)
                                                                                                                                                                                                                                                                                                                        • assemblyFile : String (optional)
                                                                                                                                                                                                                                                                                                                          Set the file name to search. If the value is empty the default filename is : **/AssemblyInfo.cs. You can use an ant fileset pattern.
                                                                                                                                                                                                                                                                                                                        • assemblyProduct : String (optional)
                                                                                                                                                                                                                                                                                                                        • assemblyTitle : String (optional)
                                                                                                                                                                                                                                                                                                                        • assemblyTrademark : String (optional)
                                                                                                                                                                                                                                                                                                                        • regexPattern : String (optional)
                                                                                                                                                                                                                                                                                                                          Regex Pattern in which version is stated. Specify this value if you want to use for versioning other than assembly files (e.g. visual studio extensions .vsix). For assembly (.dll) versioning you do not need to specify anything here.
                                                                                                                                                                                                                                                                                                                        • replacementPattern : String (optional)
                                                                                                                                                                                                                                                                                                                          Version value specified in regexPattern will be replaced by this. Use if you want versioning other than assembly files. e.g. "Version(\"%s\")" where %s will be new version number. For assembly (.dll) versioning keep this field blank.
                                                                                                                                                                                                                                                                                                                      • $class: 'ChangeEventBuilder'
                                                                                                                                                                                                                                                                                                                        Create Change Events on PagerDuty services as Jenkins build steps.
                                                                                                                                                                                                                                                                                                                        • integrationKey : String
                                                                                                                                                                                                                                                                                                                          This is the 32 character Integration Key for an Integration on a Service.
                                                                                                                                                                                                                                                                                                                        • summaryText : String (optional)
                                                                                                                                                                                                                                                                                                                          This is an alternate summary text, that can be passed onto Pager duty change events. If omitted it will default to current build's fullDisplayName.
                                                                                                                                                                                                                                                                                                                      • chatterPost
                                                                                                                                                                                                                                                                                                                        Simple step for posting a Chatter buildUrlTitle/body to a specified channel or the user's wall.
                                                                                                                                                                                                                                                                                                                        Usage Example:
                                                                                                                                                                                                                                                                                                                        postToChatter "Build Started - ${env.JOB_NAME} ${env.BUILD_NUMBER} (<${env.BUILD_URL}|Open>)"
                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                          Utilizes the Credentials Plugin's Username with Password credentials storage to communicate with Chatter.

                                                                                                                                                                                                                                                                                                                          If you're connecting from outside of your organizations trusted network, you'll also need to append your API security token to your password.

                                                                                                                                                                                                                                                                                                                          See Identity Confirmation in the salesforce.com online help for more information.

                                                                                                                                                                                                                                                                                                                        • body : String
                                                                                                                                                                                                                                                                                                                          The body text for your Chatter post
                                                                                                                                                                                                                                                                                                                        • buildUrlTitle : String (optional)
                                                                                                                                                                                                                                                                                                                          The buildUrlTitle for your Chatter post. If left blank, the title will be set to your job/pipeline name and number (JOB_NAME BUILD_DISPLAY_NAME)
                                                                                                                                                                                                                                                                                                                        • recordId : String (optional)
                                                                                                                                                                                                                                                                                                                          Id of record to chatter to (e.g. a group, or a custom object), leave blank to chatter to user's wall.
                                                                                                                                                                                                                                                                                                                        • server : String (optional)
                                                                                                                                                                                                                                                                                                                          If left blank will connect to production, if you want to connect to a sandbox or have the my domains feature enabled, enter URL of alternative login server, e.g. https://test.salesforce.com
                                                                                                                                                                                                                                                                                                                      • $class: 'CheckGate'
                                                                                                                                                                                                                                                                                                                        • pipelineId : String
                                                                                                                                                                                                                                                                                                                        • stageName : String
                                                                                                                                                                                                                                                                                                                        • versionId : String
                                                                                                                                                                                                                                                                                                                        • fatal : String
                                                                                                                                                                                                                                                                                                                      • $class: 'CheckGateBuilder'
                                                                                                                                                                                                                                                                                                                        • project : String
                                                                                                                                                                                                                                                                                                                          Select project.
                                                                                                                                                                                                                                                                                                                        • gate : String
                                                                                                                                                                                                                                                                                                                      • checkmarxASTScanner
                                                                                                                                                                                                                                                                                                                        • useOwnServerCredentials : boolean (optional)
                                                                                                                                                                                                                                                                                                                        • serverUrl : String (optional)
                                                                                                                                                                                                                                                                                                                          The base URL of your CxAST environment.
                                                                                                                                                                                                                                                                                                                        • useAuthenticationUrl : boolean (optional)
                                                                                                                                                                                                                                                                                                                          The base URL of your Checkmarx authentication server (IAM). Required for CxAST cloud platform.
                                                                                                                                                                                                                                                                                                                        • baseAuthUrl : String (optional)
                                                                                                                                                                                                                                                                                                                        • tenantName : String (optional)
                                                                                                                                                                                                                                                                                                                        • projectName : String (optional)
                                                                                                                                                                                                                                                                                                                          The name of your Project in CxAST. If you enter the name of an existing Project, then this build step will trigger a scan of that Project. If you enter a new Project name, then, when a scan is triggered it will create a new Project in CxAST with the specified name.
                                                                                                                                                                                                                                                                                                                        • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                          Create "Checkmarx Client Id and Client Secret" type credentials in Jenkins and enter your oAuth2 clientId and secret. This will be used to authenticate access to the CxAST platform whenever a scan is triggered.
                                                                                                                                                                                                                                                                                                                        • useOwnAdditionalOptions : boolean (optional)
                                                                                                                                                                                                                                                                                                                        • additionalOptions : String (optional)
                                                                                                                                                                                                                                                                                                                          You can customize your scan by adding additional arguments. The Jenkins plugin supports all CxAST CLI arguments. See documentation here
                                                                                                                                                                                                                                                                                                                          e.g- --sast-incremental true
                                                                                                                                                                                                                                                                                                                        • branchName : String (optional)
                                                                                                                                                                                                                                                                                                                        • checkmarxInstallation : String (optional)
                                                                                                                                                                                                                                                                                                                          Select the Checkmarx CLI installation in Jenkins that will be used for triggering scans. This should have been configured in the Jenkins Global Tool Configuration section.
                                                                                                                                                                                                                                                                                                                      • chlAtuoAction
                                                                                                                                                                                                                                                                                                                        • content : String
                                                                                                                                                                                                                                                                                                                        • browserString : String
                                                                                                                                                                                                                                                                                                                        • runScriptOnly : boolean
                                                                                                                                                                                                                                                                                                                        • rootPath : String
                                                                                                                                                                                                                                                                                                                        • libPath : String
                                                                                                                                                                                                                                                                                                                      • $class: 'ChrootBuilder'
                                                                                                                                                                                                                                                                                                                        • chrootName : String
                                                                                                                                                                                                                                                                                                                        • ignoreExit : boolean
                                                                                                                                                                                                                                                                                                                          The build will always succeed.
                                                                                                                                                                                                                                                                                                                        • additionalPackages : String
                                                                                                                                                                                                                                                                                                                          Additional packages to install into the chroot environment by 'apt-get'. These packages are persisted in the tarball to speed up subsequent builds. If you don't want this bahaviour use the 'Clear' option.
                                                                                                                                                                                                                                                                                                                        • packagesFile : String
                                                                                                                                                                                                                                                                                                                          Enter a list of comma separated relative paths to files in the workspace, which contain additionals packages for apt-get to install. Such files might be placed in a git repository wich is previously checked out.
                                                                                                                                                                                                                                                                                                                        • clear : boolean
                                                                                                                                                                                                                                                                                                                          Uses a fresh copied chroot tarball without packages installed from previous runs. The build will take longer but the build results will be more meaningful.
                                                                                                                                                                                                                                                                                                                        • command : String
                                                                                                                                                                                                                                                                                                                        • loginAsRoot : boolean
                                                                                                                                                                                                                                                                                                                          When this box is unchecked the subsequent commands are run inside chroot as a user with the same uid and gid as jenkins does. Whenever possible leave this box unchecked, but e. g. for testing installations it might be important to be root.
                                                                                                                                                                                                                                                                                                                        • noUpdate : boolean
                                                                                                                                                                                                                                                                                                                          When this option is enabled, the repository indices are only updated if extra packages are going to be installed. When disabling repository updates, self contained builds, which do not have to install packages, will run faster. Because packages can also be installed from commands within the buildstep, by default, the package indices are always updated.
                                                                                                                                                                                                                                                                                                                        • forceInstall : boolean
                                                                                                                                                                                                                                                                                                                          This option allows to force the installation of the specified packages. The underlying container will do whatever it can do to fulfill this request. This allows actions like downgrading, installing untrusted packages, etc.
                                                                                                                                                                                                                                                                                                                      • $class: 'CifsBuilderPlugin'
                                                                                                                                                                                                                                                                                                                        • publishers
                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                          • configName : String
                                                                                                                                                                                                                                                                                                                          • verbose : boolean
                                                                                                                                                                                                                                                                                                                          • transfers
                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                            • sourceFiles : String
                                                                                                                                                                                                                                                                                                                            • excludes : String
                                                                                                                                                                                                                                                                                                                            • remoteDirectory : String
                                                                                                                                                                                                                                                                                                                            • removePrefix : String
                                                                                                                                                                                                                                                                                                                            • remoteDirectorySDF : boolean
                                                                                                                                                                                                                                                                                                                            • flatten : boolean
                                                                                                                                                                                                                                                                                                                            • cleanRemote : boolean
                                                                                                                                                                                                                                                                                                                            • noDefaultExcludes : boolean
                                                                                                                                                                                                                                                                                                                            • makeEmptyDirs : boolean
                                                                                                                                                                                                                                                                                                                            • patternSeparator : String
                                                                                                                                                                                                                                                                                                                          • useWorkspaceInPromotion : boolean
                                                                                                                                                                                                                                                                                                                          • usePromotionTimestamp : boolean
                                                                                                                                                                                                                                                                                                                          • retry
                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                            • retries : int
                                                                                                                                                                                                                                                                                                                            • retryDelay : long
                                                                                                                                                                                                                                                                                                                          • label
                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                            • label : String
                                                                                                                                                                                                                                                                                                                        • continueOnError : boolean
                                                                                                                                                                                                                                                                                                                        • failOnError : boolean
                                                                                                                                                                                                                                                                                                                        • alwaysPublishFromMaster : boolean
                                                                                                                                                                                                                                                                                                                        • masterNodeName : String
                                                                                                                                                                                                                                                                                                                        • paramPublish
                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                          • parameterName : String
                                                                                                                                                                                                                                                                                                                      • $class: 'ClangScanBuildBuilder'
                                                                                                                                                                                                                                                                                                                        Use this option to execute clang scan-build against and XCode project.
                                                                                                                                                                                                                                                                                                                        • target : String
                                                                                                                                                                                                                                                                                                                          Provide the exact name of the XCode target you wish to have compiled and analyzed. You can use targets for all versions of XCode. This field is not required if you are using XCode and providing workspace and scheme.
                                                                                                                                                                                                                                                                                                                        • targetSdk : String
                                                                                                                                                                                                                                                                                                                          This should be set the simulator version of a currently installed SDK. For later versions of XCode, you can set this value to 'iphonesimulator' to automatically use the latest available version of the SDK. If this does not work, you can identify a specific version by issuing the following command in Terminal:
                                                                                                                                                                                                                                                                                                                          xcodebuild -showsdks

                                                                                                                                                                                                                                                                                                                          It should typically look like 'iphonesimulator4.2' where the version number may change depending on your XCode installation.
                                                                                                                                                                                                                                                                                                                        • config : String
                                                                                                                                                                                                                                                                                                                          Provide the XCode config you wish to execute scan-build against. It is recommended that you always use 'Debug' because this will allow clang to use assertions to eliminate false positives.
                                                                                                                                                                                                                                                                                                                        • clangInstallationName : String
                                                                                                                                                                                                                                                                                                                        • xcodeProjectSubPath : String
                                                                                                                                                                                                                                                                                                                          If your XCode project is located in a sub-folder of this job's workspace, provide the path here relative to the workspace. e.g. myProj/subfolder
                                                                                                                                                                                                                                                                                                                        • workspace : String
                                                                                                                                                                                                                                                                                                                          In XCode 4 and later, you are able to configure named workspaces which are basically containers for multiple XCode projects. If your build requires a workspace, please provide its name in this field. When you provide a workspace you are XCode requires that you also provide a scheme.
                                                                                                                                                                                                                                                                                                                        • scheme : String
                                                                                                                                                                                                                                                                                                                          If you are leveraging XCode workspaces and schemes, provide the name of your scheme here.
                                                                                                                                                                                                                                                                                                                        • scanbuildargs : String
                                                                                                                                                                                                                                                                                                                          This field can be used to pass additional arguments to clang scan-build. The arguments will appear before the xcodebuild sub command. You can view the assembled command by viewing the job's build console.

                                                                                                                                                                                                                                                                                                                          scan-build uses the 'clang' executable relative to itself for static analysis by default.
                                                                                                                                                                                                                                                                                                                          --use-analyzer Xcode using the 'clang' packaged with Xcode (on OS X)
                                                                                                                                                                                                                                                                                                                          --use-analyzer [path to clang] to use the 'clang' from 'path to clang' or $PATH if no path specified.
                                                                                                                                                                                                                                                                                                                        • xcodebuildargs : String
                                                                                                                                                                                                                                                                                                                          This field can be used to pass additional arguments to clang scan-build. The arguments will appear after the xcodebuild sub command. You can view the assembled command by viewing the job's build console.

                                                                                                                                                                                                                                                                                                                          -derivedDataPath $WORKSPACE/build is to save build products and other derived data to build directory under current workspace
                                                                                                                                                                                                                                                                                                                        • outputFolderName : String
                                                                                                                                                                                                                                                                                                                      • googleStorageUpload
                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                        • bucket : String
                                                                                                                                                                                                                                                                                                                        • pattern : String
                                                                                                                                                                                                                                                                                                                        • pathPrefix : String (optional)
                                                                                                                                                                                                                                                                                                                        • sharedPublicly : boolean (optional)
                                                                                                                                                                                                                                                                                                                        • showInline : boolean (optional)
                                                                                                                                                                                                                                                                                                                      • dotnetClean
                                                                                                                                                                                                                                                                                                                        The dotnet clean command cleans the output of the previous build. It's implemented as an MSBuild target, so the project is evaluated when the command is run. Only the outputs created during the build are cleaned. Both intermediate (obj) and final output (bin) folders are cleaned.
                                                                                                                                                                                                                                                                                                                        • charset : String (optional)
                                                                                                                                                                                                                                                                                                                          The character set to use for the step's output. If not specified, the charset associated with the build will be used.
                                                                                                                                                                                                                                                                                                                        • configuration : String (optional)
                                                                                                                                                                                                                                                                                                                          Defines the build configuration. The default for most projects is Debug, but you can override the build configuration settings in your project. This option is only required when cleaning if you specified it during build time.
                                                                                                                                                                                                                                                                                                                        • continueOnError : boolean (optional)
                                                                                                                                                                                                                                                                                                                          If this is checked, errors encountered will cause the build status to be set to FAILURE (or UNSTABLE, if configured that way), but the build will be allowed to continue. Otherwise, any such errors will cause the build to be terminated immediately.
                                                                                                                                                                                                                                                                                                                        • framework : String (optional)
                                                                                                                                                                                                                                                                                                                          The framework that was specified at build time. The framework must be defined in the project file. If you specified the framework at build time, you must specify the framework when cleaning.
                                                                                                                                                                                                                                                                                                                        • nologo : boolean (optional)
                                                                                                                                                                                                                                                                                                                          Doesn't display the startup banner or the copyright message.

                                                                                                                                                                                                                                                                                                                          Available since: .NET Core SDK 3.0
                                                                                                                                                                                                                                                                                                                        • option : String (optional)
                                                                                                                                                                                                                                                                                                                        • options : Array / List of String (optional)
                                                                                                                                                                                                                                                                                                                          • optionsString : String (optional)
                                                                                                                                                                                                                                                                                                                            For more information about these options, see the MSBuild Command-Line Reference.
                                                                                                                                                                                                                                                                                                                            If targets and/or properties are also configured, those will be passed after these options.
                                                                                                                                                                                                                                                                                                                          • outputDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                            The directory that contains the build artifacts to clean. If you specified the framework when the project was built, that same framework should also be specified for this cleanup action.
                                                                                                                                                                                                                                                                                                                          • project : String (optional)
                                                                                                                                                                                                                                                                                                                            The MSBuild project or solution to clean. If a directory is specified, MSBuild searches it for a (single) file that has a file extension that ends in proj or sln, and uses that file. If nothing is specified, the current working directory is searched in the same way.
                                                                                                                                                                                                                                                                                                                          • properties (optional)
                                                                                                                                                                                                                                                                                                                            • Type: java.util.Map<java.lang.String, java.lang.String>
                                                                                                                                                                                                                                                                                                                          • propertiesString : String (optional)
                                                                                                                                                                                                                                                                                                                            Additional MSBuild properties to set. These should be specified one per line, in Java properties syntax.
                                                                                                                                                                                                                                                                                                                          • runtime : String (optional)
                                                                                                                                                                                                                                                                                                                            Cleans the output folder of the specified runtime. This is used when a self-contained deployment was created.
                                                                                                                                                                                                                                                                                                                          • sdk : String (optional)
                                                                                                                                                                                                                                                                                                                            Name of a .NET SDK to use so that dotnet will be in the path.
                                                                                                                                                                                                                                                                                                                            If the default is specified, you either need to use the With .NET element (or a withDotNet block in a pipeline script) to specify one, or ensure this step runs on a node that has a .NET SDK installed and in the path.
                                                                                                                                                                                                                                                                                                                          • showSdkInfo : boolean (optional)
                                                                                                                                                                                                                                                                                                                            If enabled, dotnet --info will be executed before the main command. This shows a list of available SDKs and runtimes, indicating which one is currently being used.
                                                                                                                                                                                                                                                                                                                          • shutDownBuildServers : boolean (optional)
                                                                                                                                                                                                                                                                                                                            If enabled, dotnet build-server shutdown will be executed after the main command, shutting down build servers that may have been started.
                                                                                                                                                                                                                                                                                                                            Note: If this is not specified, a build that causes such a build server to be started may hang until those server processes end. As such, it's recommended to specify this for the last .NET-related step in a job. If using multiple SDKs, each needs its own shutdown (e.g. the .NET Core 3.1 SDK will not shut down build servers from the .NET 5.0 SDK).

                                                                                                                                                                                                                                                                                                                            Available since: .NET Core SDK 2.1
                                                                                                                                                                                                                                                                                                                          • specificSdkVersion : boolean (optional)
                                                                                                                                                                                                                                                                                                                            Depending on the platform, the dotnet executable may use the most recent SDK available on the system, even when PATH is set up to find an older SDK deployment first; see this page for more information.
                                                                                                                                                                                                                                                                                                                            By enabling this option, the configured SDK home directory will be checked, and if it only includes a single SDK deployment, a global.json file will be created in the current directory, referencing that SDK version and disabling roll-forward.
                                                                                                                                                                                                                                                                                                                            Note: This will silently overwrite any global.json already present in the current directory.
                                                                                                                                                                                                                                                                                                                          • unstableIfErrors : boolean (optional)
                                                                                                                                                                                                                                                                                                                            If this is set and the build completes with errors, the build will be marked as unstable instead of failed, and execution will continue to the next step.
                                                                                                                                                                                                                                                                                                                          • unstableIfWarnings : boolean (optional)
                                                                                                                                                                                                                                                                                                                            If this is set and the build completes with warnings (but no errors), the build will be marked as unstable instead of successful.
                                                                                                                                                                                                                                                                                                                          • verbosity : String (optional)
                                                                                                                                                                                                                                                                                                                            Sets the MSBuild verbosity level.
                                                                                                                                                                                                                                                                                                                          • workDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                            The directory in which to execute the command. By default, this is the current directory (for freestyle jobs, that is the root of the job's workspace).
                                                                                                                                                                                                                                                                                                                        • cleanPerformanceMeasurement
                                                                                                                                                                                                                                                                                                                          • cleanMeasurement : boolean (optional)
                                                                                                                                                                                                                                                                                                                          • cleanRCA : boolean (optional)
                                                                                                                                                                                                                                                                                                                          • cleanRTS : boolean (optional)
                                                                                                                                                                                                                                                                                                                        • examCleanTarget
                                                                                                                                                                                                                                                                                                                          • validNetwork
                                                                                                                                                                                                                                                                                                                            • username : String
                                                                                                                                                                                                                                                                                                                            • password : String
                                                                                                                                                                                                                                                                                                                            • projectId : String
                                                                                                                                                                                                                                                                                                                            • filepath : String
                                                                                                                                                                                                                                                                                                                          • $class: 'ClifBuilder'
                                                                                                                                                                                                                                                                                                                            • clifName : String
                                                                                                                                                                                                                                                                                                                            • clifOpts : String
                                                                                                                                                                                                                                                                                                                            • testPlanFile : String
                                                                                                                                                                                                                                                                                                                            • reportDir : String
                                                                                                                                                                                                                                                                                                                          • $class: 'CloudBuildBuilder'
                                                                                                                                                                                                                                                                                                                            This build step invokes Google Cloud Build.
                                                                                                                                                                                                                                                                                                                            • input
                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                              • credentialsId : String
                                                                                                                                                                                                                                                                                                                              • request
                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                • file
                                                                                                                                                                                                                                                                                                                                  • filename : String
                                                                                                                                                                                                                                                                                                                                    The path to the YAML build request file to pass to Google Cloud Build.
                                                                                                                                                                                                                                                                                                                                • inline
                                                                                                                                                                                                                                                                                                                                  • request : String
                                                                                                                                                                                                                                                                                                                                    The YAML Build Request to pass to Google Cloud Build.
                                                                                                                                                                                                                                                                                                                              • source (optional)
                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                • local
                                                                                                                                                                                                                                                                                                                                  • path : String
                                                                                                                                                                                                                                                                                                                                    The source to use in the build request. This may be either:
                                                                                                                                                                                                                                                                                                                                    • A path to a file within the workspace. The file must be a compressed gzipped tarball (.tgz or .tar.gz) or zip file (.zip), or
                                                                                                                                                                                                                                                                                                                                    • A path to a directory within the workspace. The contents of the directory will be archived as a gzipped tarball (.tgz) and uploaded to a temporary Cloud Storage bucket.
                                                                                                                                                                                                                                                                                                                                • repo
                                                                                                                                                                                                                                                                                                                                  • branch : String (optional)
                                                                                                                                                                                                                                                                                                                                  • commit : String (optional)
                                                                                                                                                                                                                                                                                                                                  • projectId : String (optional)
                                                                                                                                                                                                                                                                                                                                    ID of the project that owns the repo. If omitted, the project ID requesting the build is assumed.
                                                                                                                                                                                                                                                                                                                                  • repoName : String (optional)
                                                                                                                                                                                                                                                                                                                                    Name of the repo. If omitted, the name "default" is assumed.
                                                                                                                                                                                                                                                                                                                                  • tag : String (optional)
                                                                                                                                                                                                                                                                                                                                • storage
                                                                                                                                                                                                                                                                                                                                  • bucket : String
                                                                                                                                                                                                                                                                                                                                  • object : String
                                                                                                                                                                                                                                                                                                                              • substitutionList (optional)
                                                                                                                                                                                                                                                                                                                                  Nested Object
                                                                                                                                                                                                                                                                                                                                • items
                                                                                                                                                                                                                                                                                                                                  User-defined substitutions to be added to the build request. The set of user-defined substitutions referenced in the build request must exactly match the set of substitutions defined here. For details, see Build Requests - User-defined substitutions.
                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                  • key : String
                                                                                                                                                                                                                                                                                                                                    The name of the user-defined substitution. This must begin with an underscore (_) and use only numbers, uppercase letters, and underscores (respecting the regular expression _[A-Z0-9_]+). The key may not be longer than 100 characters. For details, see Build Requests - User-defined substitutions.
                                                                                                                                                                                                                                                                                                                                  • value : String
                                                                                                                                                                                                                                                                                                                                    The value of the user-defined substitution. This must not expand to longer than 100 characters. For details, see Build Requests - User-defined substitutions.
                                                                                                                                                                                                                                                                                                                              • substitutions (optional)
                                                                                                                                                                                                                                                                                                                                • Type: java.util.Map<java.lang.String, java.lang.String>
                                                                                                                                                                                                                                                                                                                          • pushToCloudFoundry
                                                                                                                                                                                                                                                                                                                            • target : String
                                                                                                                                                                                                                                                                                                                            • organization : String
                                                                                                                                                                                                                                                                                                                            • cloudSpace : String
                                                                                                                                                                                                                                                                                                                            • credentialsId : String
                                                                                                                                                                                                                                                                                                                            • manifestChoice (optional)
                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                              • appName : String (optional)
                                                                                                                                                                                                                                                                                                                              • appPath : String (optional)
                                                                                                                                                                                                                                                                                                                              • buildpack : String (optional)
                                                                                                                                                                                                                                                                                                                              • command : String (optional)
                                                                                                                                                                                                                                                                                                                              • domain : String (optional)
                                                                                                                                                                                                                                                                                                                              • envVars (optional)
                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                • key : String
                                                                                                                                                                                                                                                                                                                                • value : String
                                                                                                                                                                                                                                                                                                                              • hostname : String (optional)
                                                                                                                                                                                                                                                                                                                              • instances : String (optional)
                                                                                                                                                                                                                                                                                                                              • manifestFile : String (optional)
                                                                                                                                                                                                                                                                                                                              • memory : String (optional)
                                                                                                                                                                                                                                                                                                                              • noRoute : String (optional)
                                                                                                                                                                                                                                                                                                                              • servicesNames (optional)
                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                • name : String
                                                                                                                                                                                                                                                                                                                              • stack : String (optional)
                                                                                                                                                                                                                                                                                                                              • timeout : String (optional)
                                                                                                                                                                                                                                                                                                                              • value : String (optional)
                                                                                                                                                                                                                                                                                                                            • pluginTimeout : String (optional)
                                                                                                                                                                                                                                                                                                                            • selfSigned : String (optional)
                                                                                                                                                                                                                                                                                                                            • servicesToCreate (optional)
                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                              • name : String
                                                                                                                                                                                                                                                                                                                              • type : String
                                                                                                                                                                                                                                                                                                                              • plan : String
                                                                                                                                                                                                                                                                                                                              • resetService : boolean (optional)
                                                                                                                                                                                                                                                                                                                          • cloudhubDeployer
                                                                                                                                                                                                                                                                                                                            • environmentId : String
                                                                                                                                                                                                                                                                                                                            • orgId : String
                                                                                                                                                                                                                                                                                                                            • appName : String
                                                                                                                                                                                                                                                                                                                              The application name identifies your application not only in Runtime Manager but also in the public cloudhub.io domain. For example, an application named myapplication is accessible at http://myapplication.cloudhub.io. To avoid domain conflicts, the application name must be globally unique across CloudHub.The application name can contain between 3 and 42 alphanumeric characters (a-z, A-Z, 0-9) and dashes (-). They cannot contain spaces or other characters.
                                                                                                                                                                                                                                                                                                                            • muleVersion : String
                                                                                                                                                                                                                                                                                                                              The runtime version must be the same Mule version used to develop your application.
                                                                                                                                                                                                                                                                                                                            • filePath : String
                                                                                                                                                                                                                                                                                                                              Workspace-relative path of the artifact file to upload (it should resolve to a single file). Can use wildcards like module/dist/**/*.jar, See the @includes of Ant fileset for the exact format. Examples: File, like target/my-mule-app.jar or target/**/*.jar : The jar file will be uploaded to cloudhub.
                                                                                                                                                                                                                                                                                                                            • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                              Jenkins credentials containing The Anypoint Platform account username and password with sufficient access to perform deployment related activities on CloudHub.
                                                                                                                                                                                                                                                                                                                            • requestMode (optional)
                                                                                                                                                                                                                                                                                                                              Type of Operation to perform on CloudHub. CREATE - Deploy/Create new application UPDATE - Update application with new package and settings provided. UPDATE_FILE - Update just the zip/jar file of application, rest all settings ignored. CREATE_OR_UPDATE - Deploy/Create new application(if not already present) or update the existing application. RESTART - Restart the application already present. DELETE - Delete the application.
                                                                                                                                                                                                                                                                                                                              • Values: CREATE, UPDATE, CREATE_OR_UPDATE, UPDATE_FILE, RESTART, DELETE
                                                                                                                                                                                                                                                                                                                            • region : String (optional)
                                                                                                                                                                                                                                                                                                                              If you have global deployment enabled on your account, you can change the deployment region.
                                                                                                                                                                                                                                                                                                                            • autoScalePolicy (optional)
                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                              • autoScalePolicyName : String (optional)
                                                                                                                                                                                                                                                                                                                                The auto scaling policy name.
                                                                                                                                                                                                                                                                                                                              • enableAutoScalePolicy : boolean (optional)
                                                                                                                                                                                                                                                                                                                              • id : String (optional)
                                                                                                                                                                                                                                                                                                                              • maxScale : int (optional)
                                                                                                                                                                                                                                                                                                                                The maximum number of workers or size of workers for auto scaling. Allowed Values: 0.1, 0.2, 1, 2, 3, 4, 5, 6, 7, 8, 16
                                                                                                                                                                                                                                                                                                                              • minScale : int (optional)
                                                                                                                                                                                                                                                                                                                                The minimum number of workers or size of workers for auto scaling. Allowed values: 0.1, 0.2, 1, 2, 3, 4, 5, 6, 7, 8, 16
                                                                                                                                                                                                                                                                                                                              • scaleBasedOn : String (optional)
                                                                                                                                                                                                                                                                                                                                The metric based on which auto scaling policy scales. Allowed values: CPU, MEMORY
                                                                                                                                                                                                                                                                                                                              • scaleDown (optional)
                                                                                                                                                                                                                                                                                                                                • Type: class org.jenkinsci.plugins.cloudhubdeployer.data.Scale
                                                                                                                                                                                                                                                                                                                              • scaleDownNextScaleWaitMins : int (optional)
                                                                                                                                                                                                                                                                                                                                Number of minutes to wait before applying new scale down policy.
                                                                                                                                                                                                                                                                                                                              • scaleDownPeriodCount : int (optional)
                                                                                                                                                                                                                                                                                                                                The time in minutes to monitor the CPU/memory for low usage before scaling down.
                                                                                                                                                                                                                                                                                                                              • scaleDownValue : int (optional)
                                                                                                                                                                                                                                                                                                                                The CPU or memory usage below which scale down policy will take effect.
                                                                                                                                                                                                                                                                                                                              • scaleType : String (optional)
                                                                                                                                                                                                                                                                                                                                The scale type of the auto scaling policy. Allowed values: WORKER_COUNT, WORKER_SIZE
                                                                                                                                                                                                                                                                                                                              • scaleUp (optional)
                                                                                                                                                                                                                                                                                                                                • Type: class org.jenkinsci.plugins.cloudhubdeployer.data.Scale
                                                                                                                                                                                                                                                                                                                              • scaleUpNextScaleWaitMins : int (optional)
                                                                                                                                                                                                                                                                                                                                Number of minutes to wait before applying new scale up policy.
                                                                                                                                                                                                                                                                                                                              • scaleUpPeriodCount : int (optional)
                                                                                                                                                                                                                                                                                                                                The time in minutes to monitor the CPU/memory for high usage before scaling up.
                                                                                                                                                                                                                                                                                                                              • scaleUpValue : int (optional)
                                                                                                                                                                                                                                                                                                                                The CPU or memory usage above which scale up policy will take effect.
                                                                                                                                                                                                                                                                                                                            • autoStart : boolean (optional)
                                                                                                                                                                                                                                                                                                                              Check this flag to autostart the application after it is deployed
                                                                                                                                                                                                                                                                                                                            • debugMode (optional)
                                                                                                                                                                                                                                                                                                                              Use this to log additional details/info from the http requests.
                                                                                                                                                                                                                                                                                                                              • Values: ENABLED, DISABLED
                                                                                                                                                                                                                                                                                                                            • enableAutoScalePolicy : boolean (optional)
                                                                                                                                                                                                                                                                                                                            • envVars (optional)
                                                                                                                                                                                                                                                                                                                              you can specify properties (key-value pairs) that the application uses during deployment and while running.
                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                              • key : String (optional)
                                                                                                                                                                                                                                                                                                                              • value : String (optional)
                                                                                                                                                                                                                                                                                                                            • ignoreGlobalSettings : boolean (optional)
                                                                                                                                                                                                                                                                                                                              If checked settings from global configuration will be used that are under manage jenkins.
                                                                                                                                                                                                                                                                                                                            • logLevels (optional)
                                                                                                                                                                                                                                                                                                                              You can configure the logging level (DEBUG, WARN, ERROR, or INFO) for the application
                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                              • levelCategory (optional)
                                                                                                                                                                                                                                                                                                                                • Values: DEBUG, WARN, ERROR, INFO
                                                                                                                                                                                                                                                                                                                              • packageName : String (optional)
                                                                                                                                                                                                                                                                                                                            • loggingNgEnabled : boolean (optional)
                                                                                                                                                                                                                                                                                                                              Check this if you want to use your own logging solution using Log4j configuration.
                                                                                                                                                                                                                                                                                                                            • monitoringAutoRestart : boolean (optional)
                                                                                                                                                                                                                                                                                                                              CloudHub automatically restarts your application when the monitoring system discovers an issue.
                                                                                                                                                                                                                                                                                                                            • monitoringEnabled : boolean (optional)
                                                                                                                                                                                                                                                                                                                              Use Anypoint Monitoring and Visualizer for Mule applications running on supported versions of Mule.
                                                                                                                                                                                                                                                                                                                            • objectStoreV1 : boolean (optional)
                                                                                                                                                                                                                                                                                                                              Object Store v2 is enabled by default in Mule 4. In Mule 3, select this option to use Object Store v1.
                                                                                                                                                                                                                                                                                                                            • persistentQueues : boolean (optional)
                                                                                                                                                                                                                                                                                                                              You can use persistent queues on your application to store data in an input queue to disk. Persistent queues protect against message loss and enable you to distribute workloads across a set of workers.
                                                                                                                                                                                                                                                                                                                            • persistentQueuesEncrypted : boolean (optional)
                                                                                                                                                                                                                                                                                                                              If you enable persistent queues, you can optionally encrypt the data stored in the input queue on disk.
                                                                                                                                                                                                                                                                                                                            • timeoutConnection : int (optional)
                                                                                                                                                                                                                                                                                                                              Max time to try before failing the request.
                                                                                                                                                                                                                                                                                                                            • timeoutResponse : int (optional)
                                                                                                                                                                                                                                                                                                                              Max time to wait for response before failing the request.
                                                                                                                                                                                                                                                                                                                            • verifyDeployments : boolean (optional)
                                                                                                                                                                                                                                                                                                                              Verify if API is stated after deployment.
                                                                                                                                                                                                                                                                                                                            • verifyIntervalInSeconds : int (optional)
                                                                                                                                                                                                                                                                                                                            • workerAmount : int (optional)
                                                                                                                                                                                                                                                                                                                              No of workers to run for API.
                                                                                                                                                                                                                                                                                                                            • workerCpu : String (optional)
                                                                                                                                                                                                                                                                                                                              Compute Capacity for each worker(vCores). Check MuleSoft Documentation for available sizes(worker-size-and-vcores). Example Values :- 0.1, 2 or 16
                                                                                                                                                                                                                                                                                                                            • workerMemory : String (optional)
                                                                                                                                                                                                                                                                                                                              Heap memory (Or Ram) for each worker. Check MuleSoft Documentation for available sizes (worker-size-and-vcores. Example Values :- "500 MB", "1.5 GB" or "32 GB"
                                                                                                                                                                                                                                                                                                                            • workerType : String (optional)
                                                                                                                                                                                                                                                                                                                              Type of worker to use "Micro", "Small", "Medium" or "Large". Check MuleSoft Documentation for additional details.
                                                                                                                                                                                                                                                                                                                            • workerWeight : String (optional)
                                                                                                                                                                                                                                                                                                                              Weight for worker type. Check MuleSoft Documentation for available sizes(worker-size-and-vcores). Example Values :- 0.1, 0.2 or 1
                                                                                                                                                                                                                                                                                                                          • $class: 'CloudShellConfig'
                                                                                                                                                                                                                                                                                                                            • buildStep
                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                              • $class: 'StartSandbox'
                                                                                                                                                                                                                                                                                                                                • blueprintName : String
                                                                                                                                                                                                                                                                                                                                  Enter the name or id of a CloudShell blueprint.
                                                                                                                                                                                                                                                                                                                                • sandboxDuration : String
                                                                                                                                                                                                                                                                                                                                  The sandbox duration in minuets.
                                                                                                                                                                                                                                                                                                                                • maxWaitForSandboxAvailability : int
                                                                                                                                                                                                                                                                                                                                  Enter the number of minutes to wait until the Sandbox becomes available in case no resources are available to reserve it.
                                                                                                                                                                                                                                                                                                                                • setupTimeout : int
                                                                                                                                                                                                                                                                                                                                  Enter the number of minutes to wait for the sandbox setup to complete
                                                                                                                                                                                                                                                                                                                                • params : String (optional)
                                                                                                                                                                                                                                                                                                                                  Blueprint Parameter in this syntax: "input1=my_name; input2=30"
                                                                                                                                                                                                                                                                                                                                • sandboxDomain : String (optional)
                                                                                                                                                                                                                                                                                                                                  Sandbox will be created in the following domain.
                                                                                                                                                                                                                                                                                                                                • sandboxName : String (optional)
                                                                                                                                                                                                                                                                                                                                  Sandboxes will be created with this name instead of the blueprint name.
                                                                                                                                                                                                                                                                                                                          • $class: 'CmakeBuilder'
                                                                                                                                                                                                                                                                                                                            Uses CMake to generate build-scripts and can run these.
                                                                                                                                                                                                                                                                                                                            This causes Jenkins to invoke cmake -G with the given options.
                                                                                                                                                                                                                                                                                                                            Any non-zero exit code during build-script generation causes Jenkins to mark the build as a failure.
                                                                                                                                                                                                                                                                                                                            It also can expose the CMAKE_BUILD_TOOL build environment variable if the chosen generator supports that.
                                                                                                                                                                                                                                                                                                                            • installationName : String
                                                                                                                                                                                                                                                                                                                            • buildDir : String (optional)
                                                                                                                                                                                                                                                                                                                            • buildType : String (optional)
                                                                                                                                                                                                                                                                                                                            • cleanBuild : boolean (optional)
                                                                                                                                                                                                                                                                                                                            • cmakeArgs : String (optional)
                                                                                                                                                                                                                                                                                                                            • generator : String (optional)
                                                                                                                                                                                                                                                                                                                            • preloadScript : String (optional)
                                                                                                                                                                                                                                                                                                                            • sourceDir : String (optional)
                                                                                                                                                                                                                                                                                                                            • steps (optional)
                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                              • args : String (optional)
                                                                                                                                                                                                                                                                                                                                Specify arguments to pass to the build tool or to cmake. Arguments must be separated by spaces but may contain spaces if they are enclosed in double quotes (will be handled like a Unix shell does),
                                                                                                                                                                                                                                                                                                                                Most of the time, you will want to leave this empty (to call the default build target) or you will specify just some build target names here.
                                                                                                                                                                                                                                                                                                                              • envVars : String (optional)
                                                                                                                                                                                                                                                                                                                                Specify extra environment variables to pass to the build tool as key-value pairs here.
                                                                                                                                                                                                                                                                                                                                Each entry must be on its own line, for example:
                                                                                                                                                                                                                                                                                                                                DESTDIR=${WORKSPACE}/artifacts/dir
                                                                                                                                                                                                                                                                                                                                KEY=VALUE
                                                                                                                                                                                                                                                                                                                              • withCmake : boolean (optional)
                                                                                                                                                                                                                                                                                                                                Whether to run the actual build tool directly (by expanding $CMAKE_BUILD_TOOL) or to have cmake run the build tool (by invoking cmake --build <dir>).
                                                                                                                                                                                                                                                                                                                                • Leave unchecked for minimal performance overhead.
                                                                                                                                                                                                                                                                                                                                • Make it checked, if you selected one of the Visual Studio or Xcode generators above AND if you run CMake v. 2.8.11 or newer.
                                                                                                                                                                                                                                                                                                                          • $class: 'CocoaPodsBuilder'
                                                                                                                                                                                                                                                                                                                            • cleanpods : boolean
                                                                                                                                                                                                                                                                                                                              If checked the "pod" folder will be deleted before updating the pods
                                                                                                                                                                                                                                                                                                                          • $class: 'CodeBuilder'
                                                                                                                                                                                                                                                                                                                            • credentialsType : String
                                                                                                                                                                                                                                                                                                                            • credentialsId : String
                                                                                                                                                                                                                                                                                                                            • proxyHost : String
                                                                                                                                                                                                                                                                                                                            • proxyPort : String
                                                                                                                                                                                                                                                                                                                            • awsAccessKey : String
                                                                                                                                                                                                                                                                                                                            • awsSecretKey
                                                                                                                                                                                                                                                                                                                              • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                            • awsSessionToken : String
                                                                                                                                                                                                                                                                                                                            • region : String
                                                                                                                                                                                                                                                                                                                            • projectName : String
                                                                                                                                                                                                                                                                                                                            • sourceVersion : String
                                                                                                                                                                                                                                                                                                                            • sseAlgorithm : String
                                                                                                                                                                                                                                                                                                                            • sourceControlType : String
                                                                                                                                                                                                                                                                                                                            • localSourcePath : String
                                                                                                                                                                                                                                                                                                                            • workspaceSubdir : String
                                                                                                                                                                                                                                                                                                                            • gitCloneDepthOverride : String
                                                                                                                                                                                                                                                                                                                            • reportBuildStatusOverride : String
                                                                                                                                                                                                                                                                                                                            • secondarySourcesOverride : String
                                                                                                                                                                                                                                                                                                                            • secondarySourcesVersionOverride : String
                                                                                                                                                                                                                                                                                                                            • artifactTypeOverride : String
                                                                                                                                                                                                                                                                                                                            • artifactLocationOverride : String
                                                                                                                                                                                                                                                                                                                            • artifactNameOverride : String
                                                                                                                                                                                                                                                                                                                            • artifactNamespaceOverride : String
                                                                                                                                                                                                                                                                                                                            • artifactPackagingOverride : String
                                                                                                                                                                                                                                                                                                                            • artifactPathOverride : String
                                                                                                                                                                                                                                                                                                                            • artifactEncryptionDisabledOverride : String
                                                                                                                                                                                                                                                                                                                            • overrideArtifactName : String
                                                                                                                                                                                                                                                                                                                            • secondaryArtifactsOverride : String
                                                                                                                                                                                                                                                                                                                            • envVariables : String
                                                                                                                                                                                                                                                                                                                            • envParameters : String
                                                                                                                                                                                                                                                                                                                            • buildSpecFile : String
                                                                                                                                                                                                                                                                                                                            • buildTimeoutOverride : String
                                                                                                                                                                                                                                                                                                                            • sourceTypeOverride : String
                                                                                                                                                                                                                                                                                                                            • sourceLocationOverride : String
                                                                                                                                                                                                                                                                                                                            • environmentTypeOverride : String
                                                                                                                                                                                                                                                                                                                            • imageOverride : String
                                                                                                                                                                                                                                                                                                                            • computeTypeOverride : String
                                                                                                                                                                                                                                                                                                                            • cacheTypeOverride : String
                                                                                                                                                                                                                                                                                                                            • cacheLocationOverride : String
                                                                                                                                                                                                                                                                                                                            • cacheModesOverride : String
                                                                                                                                                                                                                                                                                                                            • cloudWatchLogsStatusOverride : String
                                                                                                                                                                                                                                                                                                                            • cloudWatchLogsGroupNameOverride : String
                                                                                                                                                                                                                                                                                                                            • cloudWatchLogsStreamNameOverride : String
                                                                                                                                                                                                                                                                                                                            • s3LogsStatusOverride : String
                                                                                                                                                                                                                                                                                                                            • s3LogsEncryptionDisabledOverride : String
                                                                                                                                                                                                                                                                                                                            • s3LogsLocationOverride : String
                                                                                                                                                                                                                                                                                                                            • certificateOverride : String
                                                                                                                                                                                                                                                                                                                            • serviceRoleOverride : String
                                                                                                                                                                                                                                                                                                                            • insecureSslOverride : String
                                                                                                                                                                                                                                                                                                                            • privilegedModeOverride : String
                                                                                                                                                                                                                                                                                                                            • cwlStreamingDisabled : String
                                                                                                                                                                                                                                                                                                                            • exceptionFailureMode : String
                                                                                                                                                                                                                                                                                                                            • downloadArtifacts : String
                                                                                                                                                                                                                                                                                                                            • downloadArtifactsRelativePath : String
                                                                                                                                                                                                                                                                                                                            • workspaceExcludes : String (optional)
                                                                                                                                                                                                                                                                                                                            • workspaceIncludes : String (optional)
                                                                                                                                                                                                                                                                                                                          • $class: 'CodeCoverageBuilder'
                                                                                                                                                                                                                                                                                                                            • connectionId : String
                                                                                                                                                                                                                                                                                                                            • credentialsId : String
                                                                                                                                                                                                                                                                                                                            • analysisPropertiesPath : String
                                                                                                                                                                                                                                                                                                                            • analysisProperties : String
                                                                                                                                                                                                                                                                                                                          • codescene
                                                                                                                                                                                                                                                                                                                            • credentialsId : String
                                                                                                                                                                                                                                                                                                                              Select username/password credentials defined in Jenkins configuration. This is a safe way to use credentials in Jenkins plugin. See Injecting Secrets into Jenkins Build Jobs for more details.
                                                                                                                                                                                                                                                                                                                            • deltaAnalysisUrl : String
                                                                                                                                                                                                                                                                                                                            • repository : String
                                                                                                                                                                                                                                                                                                                            • analyzeBranchDiff : boolean (optional)
                                                                                                                                                                                                                                                                                                                            • analyzeLatestIndividually : boolean (optional)
                                                                                                                                                                                                                                                                                                                              Commits not seen in previous successful builds will be used for separate delta analyses.
                                                                                                                                                                                                                                                                                                                            • baseRevision : String (optional)
                                                                                                                                                                                                                                                                                                                            • couplingThresholdPercent : int (optional)
                                                                                                                                                                                                                                                                                                                            • failOnDecliningCodeHealth : boolean (optional)
                                                                                                                                                                                                                                                                                                                              Check this option to mark the build as unstable if the Code Health of a hotspot declines.
                                                                                                                                                                                                                                                                                                                            • failOnFailedGoal : boolean (optional)
                                                                                                                                                                                                                                                                                                                              Check this option to mark the build as unstable if a goal -- as defined by CodeScene's Intelligent Notes -- is violated. This could be a supervised hotspot that suddenly declines in Code Health, or a module indicated as No Problem that starts to accumulate complex code, etc.
                                                                                                                                                                                                                                                                                                                            • letBuildPassOnFailedAnalysis : boolean (optional)
                                                                                                                                                                                                                                                                                                                              By default we fail the build if CodeScene couldn't run an analysis (e.g. couldn't update the repository). This behaviour can be overridden here.
                                                                                                                                                                                                                                                                                                                            • markBuildAsUnstable : boolean (optional)
                                                                                                                                                                                                                                                                                                                            • originUrl : String (optional)
                                                                                                                                                                                                                                                                                                                            • riskThreshold : int (optional)
                                                                                                                                                                                                                                                                                                                          • $class: 'CodeStreamBuilder'
                                                                                                                                                                                                                                                                                                                            • serverUrl : String
                                                                                                                                                                                                                                                                                                                              vRealize Automation host.
                                                                                                                                                                                                                                                                                                                            • userName : String
                                                                                                                                                                                                                                                                                                                              User name
                                                                                                                                                                                                                                                                                                                            • password : String
                                                                                                                                                                                                                                                                                                                              Password
                                                                                                                                                                                                                                                                                                                            • tenant : String
                                                                                                                                                                                                                                                                                                                              Tenant
                                                                                                                                                                                                                                                                                                                            • pipelineName : String
                                                                                                                                                                                                                                                                                                                              CodeStream pipeline name. Please not only latest version of this pipeline will be executed.
                                                                                                                                                                                                                                                                                                                            • waitExec : boolean
                                                                                                                                                                                                                                                                                                                            • pipelineParams
                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                              • value : String
                                                                                                                                                                                                                                                                                                                              • name : String
                                                                                                                                                                                                                                                                                                                          • $class: 'CodefreshPipelineBuilder'
                                                                                                                                                                                                                                                                                                                            • selectPipeline
                                                                                                                                                                                                                                                                                                                              Check this if there's no SCM defined for current job or you would like to trigger a different service pipeline.
                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                              • cfPipeline : String
                                                                                                                                                                                                                                                                                                                              • cfBranch : String
                                                                                                                                                                                                                                                                                                                            • setCFVars
                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                              • vars
                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                • Variable : String
                                                                                                                                                                                                                                                                                                                                • Value : String
                                                                                                                                                                                                                                                                                                                          • $class: 'CommentsRemoverBuilder'
                                                                                                                                                                                                                                                                                                                            • filename : String
                                                                                                                                                                                                                                                                                                                              Name of the input file to have comments removed from
                                                                                                                                                                                                                                                                                                                            • language : String
                                                                                                                                                                                                                                                                                                                              Language of the input file - helps locate comments
                                                                                                                                                                                                                                                                                                                            • outputDir : String
                                                                                                                                                                                                                                                                                                                              After execution the result will be in this directory in the workspace
                                                                                                                                                                                                                                                                                                                          • $class: 'CompareBuilder'
                                                                                                                                                                                                                                                                                                                            Compare two different schemas (from database, repository or snapshot). Based on it you can do in the next steps further actions (like generating report or alter script)
                                                                                                                                                                                                                                                                                                                            • outputFolder : String

                                                                                                                                                                                                                                                                                                                              Path to the folder in that should be used to store compare output.
                                                                                                                                                                                                                                                                                                                              It serves as input for following steps like Generate create SQL script or Generate Report.



                                                                                                                                                                                                                                                                                                                              Folder location must be specified as:

                                                                                                                                                                                                                                                                                                                              • Absolute path to location on your Jenkins master node
                                                                                                                                                                                                                                                                                                                              • Relative path to your project's workspace. Either starting with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.
                                                                                                                                                                                                                                                                                                                              • Relative path to your job's run root directory. It must start with ${JOB_ROOT_DIR} prefix. i.e. ${JOB_ROOT_DIR}/dir.

                                                                                                                                                                                                                                                                                                                            • srcInputType : String
                                                                                                                                                                                                                                                                                                                            • tgtInputType : String
                                                                                                                                                                                                                                                                                                                            • srcInputFileOrFolder : String

                                                                                                                                                                                                                                                                                                                              Specify input folder/file that will be used as source side input for compare. Following inputs are expected.

                                                                                                                                                                                                                                                                                                                              • Database - input is exported connection file
                                                                                                                                                                                                                                                                                                                              • File System Synchronization - input is folder mapped through Toad Edge file system synchronization
                                                                                                                                                                                                                                                                                                                              • Snapshot - input is snapshot file



                                                                                                                                                                                                                                                                                                                              Folder/file location must be specified as:

                                                                                                                                                                                                                                                                                                                              • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                            • tgtInputFileOrFolder : String

                                                                                                                                                                                                                                                                                                                              Specify input folder/file that will be used as target side input for compare. Following inputs are expected.

                                                                                                                                                                                                                                                                                                                              • Database - input is exported connection file
                                                                                                                                                                                                                                                                                                                              • File System Synchronization - input is folder mapped through Toad Edge file system synchronization
                                                                                                                                                                                                                                                                                                                              • Snapshot - input is snapshot file



                                                                                                                                                                                                                                                                                                                              Folder/file location must be specified as:

                                                                                                                                                                                                                                                                                                                              • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                            • configFile : String

                                                                                                                                                                                                                                                                                                                              Specify settings file location. This file should be exported from Toad Edge and contain all compare settings.



                                                                                                                                                                                                                                                                                                                              File location must be specified as:

                                                                                                                                                                                                                                                                                                                              • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                          • $class: 'CompareWithBaselineBuilder'
                                                                                                                                                                                                                                                                                                                            Compare your current schema with the baseline. In case that the schema is different the build step will fail.
                                                                                                                                                                                                                                                                                                                            • outputFolder : String

                                                                                                                                                                                                                                                                                                                              Path to the folder in that should be used to store baseline compare output.
                                                                                                                                                                                                                                                                                                                              It serves as input for following steps like Generate create SQL script or Generate Report.



                                                                                                                                                                                                                                                                                                                              Folder location must be specified as:

                                                                                                                                                                                                                                                                                                                              • Absolute path to location on your Jenkins master node
                                                                                                                                                                                                                                                                                                                              • Relative path to your project's workspace. Either starting with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.
                                                                                                                                                                                                                                                                                                                              • Relative path to your job's run root directory. It must start with ${JOB_ROOT_DIR} prefix. i.e. ${JOB_ROOT_DIR}dir.

                                                                                                                                                                                                                                                                                                                            • srcInputType : String
                                                                                                                                                                                                                                                                                                                            • tgtInputType : String
                                                                                                                                                                                                                                                                                                                            • srcInputFileOrFolder : String

                                                                                                                                                                                                                                                                                                                              Specify input folder/file that will be used as source side input for baseline compare. Following inputs are expected.

                                                                                                                                                                                                                                                                                                                              • Database - input is exported connection file
                                                                                                                                                                                                                                                                                                                              • File System Synchronization - input is folder mapped through Toad Edge file system synchronization
                                                                                                                                                                                                                                                                                                                              • Baseline - input is baseline snapshot file



                                                                                                                                                                                                                                                                                                                              Folder/file location must be specified as:

                                                                                                                                                                                                                                                                                                                              • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                            • tgtInputFileOrFolder : String

                                                                                                                                                                                                                                                                                                                              Specify input folder/file that will be used as target side input for baseline compare. Following inputs are expected.

                                                                                                                                                                                                                                                                                                                              • Database - input is exported connection file
                                                                                                                                                                                                                                                                                                                              • File System Synchronization - input is folder mapped through Toad Edge file system synchronization
                                                                                                                                                                                                                                                                                                                              • Baseline - input is baseline snapshot file



                                                                                                                                                                                                                                                                                                                              Folder/file location must be specified as:

                                                                                                                                                                                                                                                                                                                              • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                            • configFile : String

                                                                                                                                                                                                                                                                                                                              Specify settings file location. This file should be exported from Toad Edge and contain all compare settings.



                                                                                                                                                                                                                                                                                                                              File location must be specified as:

                                                                                                                                                                                                                                                                                                                              • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                          • $class: 'CompoundBuilder'
                                                                                                                                                                                                                                                                                                                            • role : String
                                                                                                                                                                                                                                                                                                                            • number : String
                                                                                                                                                                                                                                                                                                                            • actualBuilder
                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                              • $class: 'A3Builder'
                                                                                                                                                                                                                                                                                                                                • project_file : String
                                                                                                                                                                                                                                                                                                                                  Absolute path to the a³ project file (.apx) containing the analysis items and configuration.
                                                                                                                                                                                                                                                                                                                                  (Note: a³ workspace files (also .apx) are not supported as input.)
                                                                                                                                                                                                                                                                                                                                • analysis_ids : String
                                                                                                                                                                                                                                                                                                                                  The following values are allowed:
                                                                                                                                                                                                                                                                                                                                  • Comma separated list of analysis IDs. Then only the given analysis items will be executed. Note: The ID must be contained in the apx project and must adhere the analysis ID naming conventions (letters, numbers and underscores only).
                                                                                                                                                                                                                                                                                                                                  • No ID at all (i.e. empty field). Then all analysis items specified in the apx project file will be executed.
                                                                                                                                                                                                                                                                                                                                • pedantic_level : String
                                                                                                                                                                                                                                                                                                                                • export_a3apxworkspace : String
                                                                                                                                                                                                                                                                                                                                  Exports the status of a³ at the end of the a³ analysis build step run as a workspace .apx file. This workspace file can later be opened in an interactive run of a³. The result is that the a³ GUI then shows all messages and all results generated by the batch-mode analyses without the need to run these analyses again.
                                                                                                                                                                                                                                                                                                                                • copy_report_file : boolean
                                                                                                                                                                                                                                                                                                                                • copy_result_file : boolean
                                                                                                                                                                                                                                                                                                                                • skip_a3_analysis : boolean
                                                                                                                                                                                                                                                                                                                                  This switch can be used to deactivate the a³ analysis build step. This switch provides a more convenient method to temporarily deactivate analysis runs than removing the entire build step and reconfiguring the a³ analysis run from scratch when later adding the build step again.
                                                                                                                                                                                                                                                                                                                              • $class: 'ACSDeploymentBuilder'
                                                                                                                                                                                                                                                                                                                                • context
                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                  • azureCredentialsId : String
                                                                                                                                                                                                                                                                                                                                    The Azure Service Principal credentials used to communicate with the Azure services. Check the following documentation for more information about the service principal:
                                                                                                                                                                                                                                                                                                                                  • resourceGroupName : String
                                                                                                                                                                                                                                                                                                                                    Resource group of the target Azure Container Service.
                                                                                                                                                                                                                                                                                                                                  • containerService : String
                                                                                                                                                                                                                                                                                                                                    The name of the Azure Container Service. Refer to the following documentation on how to setup Azure Container Service:
                                                                                                                                                                                                                                                                                                                                  • sshCredentialsId : String

                                                                                                                                                                                                                                                                                                                                    The username and private key credential used to authenticate with the ACS clusters master node. This is the private key paired with the SSH RSA public key provided when you create the ACS cluster (see Deploy a Docker container hosting solution using the Azure portal ).

                                                                                                                                                                                                                                                                                                                                    The username and key credentials can be updated from Azure Portal. Find the Virtual Machine for your ACS cluster master node from the portal, and you can update the credential from SUPPORT + TROUBLESHOOTING >>> Reset password page.

                                                                                                                                                                                                                                                                                                                                  • configFilePaths : String

                                                                                                                                                                                                                                                                                                                                    The path patterns for the specific cluster (Kubernetes, DC/OS, Docker Swarm) configurations you want to deploy, in the form of Ant glob syntax.

                                                                                                                                                                                                                                                                                                                                  • containerRegistryCredentials (optional)
                                                                                                                                                                                                                                                                                                                                    All the credentials needed for pulling images from private repositories. Specify multiple entries if your deployments need to pull images from multiple, private repositories that require authentication.
                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                    • url : String
                                                                                                                                                                                                                                                                                                                                      URL to the Docker registry you are using. May be left blank to use the public DockerHub registry (currently https://index.docker.io/v1/).
                                                                                                                                                                                                                                                                                                                                    • credentialsId : String
                                                                                                                                                                                                                                                                                                                                  • dcosDockerCredenditalsPathShared : boolean (optional)

                                                                                                                                                                                                                                                                                                                                    Determine if the Docker credentials archive upload path specified above is shared among all the agents.

                                                                                                                                                                                                                                                                                                                                    To ease the shared files access, we may create share file storage for all the DC/OS agent nodes as this documentation (Create and mount a file share to a DC/OS cluster) suggests. With the help of the shared storage, we only need to upload the Docker credentials archive to the shared storage once, and all the agent nodes get the access to the resource immediately.

                                                                                                                                                                                                                                                                                                                                    Check this option if the Docker credentials archive upload path is a shared storage path.

                                                                                                                                                                                                                                                                                                                                  • dcosDockerCredentialsPath : String (optional)

                                                                                                                                                                                                                                                                                                                                    The path on the DC/OS cluster agent nodes to store the docker credentials archive docker.tar.gz. Only absolute path is allowed here. Environment variable substitution is enabled for the path input. Due to the limitation in the underlying Mesos fetcher used by Marathon, special characters that need URI escaping and the character set {single quote ('), back slash (\), nul (\0)}, are not allowed in the path, otherwise it will fail to load the resource before running the container.

                                                                                                                                                                                                                                                                                                                                    If not specified, the plugin will generate a path specific for the build with the following pattern.

                                                                                                                                                                                                                                                                                                                                    
                                                                                                                                                                                                                                                                                                                                    /home/<linuxAdminUser>/acs-plugin-dcos.docker/<unique-name-generated-for-the-build>

                                                                                                                                                                                                                                                                                                                                    The plugin will generate the docker credentials archive with the credentials provided, and upload the archive to the given path for all the agents. You can use it to construct the URI used in your Marathon application definition.

                                                                                                                                                                                                                                                                                                                                    
                                                                                                                                                                                                                                                                                                                                    "uris":  [
                                                                                                                                                                                                                                                                                                                                        "file://<filled-path>/docker.tar.gz"
                                                                                                                                                                                                                                                                                                                                    ]

                                                                                                                                                                                                                                                                                                                                    The URI will be exposed with the environment variable $MARATHON_DOCKER_CFG_ARCHIVE_URI. You can use this in your Marathon application definition when the "Enable Variable Substitution in Config" option is enabled. This helps when the upload path is not filled and generated by the build, or if the path changes frequently.

                                                                                                                                                                                                                                                                                                                                    Note that if an archive exists in the target path already, the build will overwrite that file.

                                                                                                                                                                                                                                                                                                                                    Reference: Marathon: Using a Private Docker Registry

                                                                                                                                                                                                                                                                                                                                  • enableConfigSubstitution : boolean (optional)
                                                                                                                                                                                                                                                                                                                                    Substitute variables (in the form $VARIABLE or ${VARIABLE}) in the configuration with values from Jenkins environment variables.

                                                                                                                                                                                                                                                                                                                                    This allows you to use dynamic values produced during the build in your Kubernetes or DC/OS configurations, e.g., a dynamically generated Docker image tag which will be used later in the deployment.

                                                                                                                                                                                                                                                                                                                                  • secretName : String (optional)
                                                                                                                                                                                                                                                                                                                                    The secret name that you can use in the Kubernetes Deployment configuration for the imagePullSecrets entry. Environment variable substitution are supported for the name input, so you can use available environment variables to construct the name dynamically, e.g., some-secret-$BUILD_NUMBER. The name should be in the pattern [a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*, i.e., dot (.) concatenated sequences of hyphen (-) separated alphanumeric words. (See Kubernetes Names)

                                                                                                                                                                                                                                                                                                                                    If left blank, the plugin will generate a name based on the build name.

                                                                                                                                                                                                                                                                                                                                    The secret name will be exposed with the environment variable $KUBERNETES_SECRET_NAME. You can use this in your Kubernetes configuration to reference the updated secret when the "Enable Variable Substitution in Config" option is enabled.

                                                                                                                                                                                                                                                                                                                                    
                                                                                                                                                                                                                                                                                                                                    apiVersion: extensions/v1beta1
                                                                                                                                                                                                                                                                                                                                    kind: Deployment
                                                                                                                                                                                                                                                                                                                                    metadata:
                                                                                                                                                                                                                                                                                                                                      name: nginx
                                                                                                                                                                                                                                                                                                                                    spec:
                                                                                                                                                                                                                                                                                                                                      replicas: 1
                                                                                                                                                                                                                                                                                                                                      template:
                                                                                                                                                                                                                                                                                                                                        metadata:
                                                                                                                                                                                                                                                                                                                                          labels:
                                                                                                                                                                                                                                                                                                                                            app: nginx
                                                                                                                                                                                                                                                                                                                                        spec:
                                                                                                                                                                                                                                                                                                                                          containers:
                                                                                                                                                                                                                                                                                                                                          - name: nginx
                                                                                                                                                                                                                                                                                                                                            image: some.private.registry.domain/nginx
                                                                                                                                                                                                                                                                                                                                            ports:
                                                                                                                                                                                                                                                                                                                                            - containerPort: 80
                                                                                                                                                                                                                                                                                                                                          imagePullSecrets:
                                                                                                                                                                                                                                                                                                                                          - name: $KUBERNETES_SECRET_NAME
                                                                                                                                                                                                                                                                                                                                    

                                                                                                                                                                                                                                                                                                                                    Note that once the secret is created, it will only be updated by the plugin. You have to manually delete it when it is not used anymore. If this is a problem, you may use fixed name so every time the job runs, the secret gets updated and no new secret is created.

                                                                                                                                                                                                                                                                                                                                  • secretNamespace : String (optional)
                                                                                                                                                                                                                                                                                                                                    The Kubernetes namespace in which the secrets will be created with the credentials configured below.
                                                                                                                                                                                                                                                                                                                                  • swarmRemoveContainersFirst : boolean (optional)
                                                                                                                                                                                                                                                                                                                                    Stop and remove containers first.
                                                                                                                                                                                                                                                                                                                              • ACXScanBuilder
                                                                                                                                                                                                                                                                                                                                • ncScanType : String
                                                                                                                                                                                                                                                                                                                                • ncWebsiteId : String
                                                                                                                                                                                                                                                                                                                                • ncProfileId : String
                                                                                                                                                                                                                                                                                                                                • ncDoNotFail : boolean (optional)
                                                                                                                                                                                                                                                                                                                                • acxServerURL : String (optional)
                                                                                                                                                                                                                                                                                                                                • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                • ncApiToken : Object (optional)
                                                                                                                                                                                                                                                                                                                                • ncConfirmed : boolean (optional)
                                                                                                                                                                                                                                                                                                                                • ncIgnoreFalsePositive : boolean (optional)
                                                                                                                                                                                                                                                                                                                                • ncIgnoreRiskAccepted : boolean (optional)
                                                                                                                                                                                                                                                                                                                                • ncSeverity : String (optional)
                                                                                                                                                                                                                                                                                                                                • ncStopScan : boolean (optional)
                                                                                                                                                                                                                                                                                                                              • cfyAzureArm
                                                                                                                                                                                                                                                                                                                                • azureCredentialsId : String (optional)

                                                                                                                                                                                                                                                                                                                                  The ID of the credentials to use when accessing Azure. Parameters' expansion is supported when using freestyle jobs.

                                                                                                                                                                                                                                                                                                                                • credentialsId : String (optional)

                                                                                                                                                                                                                                                                                                                                  The ID of the credentials to use when accessing Cloudify. Parameters' expansion is supported when using freestyle jobs.

                                                                                                                                                                                                                                                                                                                                • debugOutput : boolean (optional)
                                                                                                                                                                                                                                                                                                                                  If checked, then printed Cloudify events and logs will include debug-level records.
                                                                                                                                                                                                                                                                                                                                • deploymentId : String (optional)
                                                                                                                                                                                                                                                                                                                                • echoEnvData : boolean (optional)

                                                                                                                                                                                                                                                                                                                                  If checked, then the created environment's data will be printed to the job's log.

                                                                                                                                                                                                                                                                                                                                • echoInputs : boolean (optional)
                                                                                                                                                                                                                                                                                                                                  If checked, then the Cloudify deployment inputs are echoed to the Jenkins log.
                                                                                                                                                                                                                                                                                                                                • envDataLocation : String (optional)

                                                                                                                                                                                                                                                                                                                                  Path to a file that will contain the created environment's data. If not provided, the environment data won't be written.

                                                                                                                                                                                                                                                                                                                                • location : String (optional)

                                                                                                                                                                                                                                                                                                                                  The Azure location where the created resource group should reside in. If omitted, the value of the azure_default_location Cloudify secret will be used.

                                                                                                                                                                                                                                                                                                                                • parameters (optional)

                                                                                                                                                                                                                                                                                                                                  YAML/JSON of parameters to pass to the template.

                                                                                                                                                                                                                                                                                                                                  • Type: java.util.Map<java.lang.String, java.lang.Object>
                                                                                                                                                                                                                                                                                                                                • parametersAsString : String (optional)
                                                                                                                                                                                                                                                                                                                                • parametersFile : String (optional)

                                                                                                                                                                                                                                                                                                                                  Path, relative to the Jenkins workspace root, of a YAML/JSON file containing parmaeters to pass to the template.

                                                                                                                                                                                                                                                                                                                                • resourceGroupName : String (optional)

                                                                                                                                                                                                                                                                                                                                  Name of resource group to create for the template.

                                                                                                                                                                                                                                                                                                                                • templateFile : String (optional)

                                                                                                                                                                                                                                                                                                                                  Workspace-relative path of the ARM template file.

                                                                                                                                                                                                                                                                                                                                • tenant : String (optional)
                                                                                                                                                                                                                                                                                                                              • $class: 'AWSEBBuilder'
                                                                                                                                                                                                                                                                                                                                • extensions
                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                  • awsRegion
                                                                                                                                                                                                                                                                                                                                    AWS Region (e.g. us-east-1) This will be the default if no valid environments are provided in the Regions field.
                                                                                                                                                                                                                                                                                                                                    • Values: GovCloud, US_GOV_EAST_1, US_EAST_1, US_EAST_2, US_WEST_1, US_WEST_2, EU_WEST_1, EU_WEST_2, EU_WEST_3, EU_CENTRAL_1, EU_NORTH_1, EU_SOUTH_1, AP_EAST_1, AP_SOUTH_1, AP_SOUTHEAST_1, AP_SOUTHEAST_2, AP_SOUTHEAST_3, AP_NORTHEAST_1, AP_NORTHEAST_2, AP_NORTHEAST_3, SA_EAST_1, CN_NORTH_1, CN_NORTHWEST_1, CA_CENTRAL_1, ME_SOUTH_1, AF_SOUTH_1, US_ISO_EAST_1, US_ISOB_EAST_1, US_ISO_WEST_1
                                                                                                                                                                                                                                                                                                                                  • awsRegionText : String
                                                                                                                                                                                                                                                                                                                                    AWS Region (e.g. us-east-1) Needs to match an environment name. If one is missing, write an issue so we can update the aws sdk.
                                                                                                                                                                                                                                                                                                                                  • credentialsString : String
                                                                                                                                                                                                                                                                                                                                  • credentialsText : String
                                                                                                                                                                                                                                                                                                                                    Use a credentials name that will be resolved during the build.
                                                                                                                                                                                                                                                                                                                                  • applicationName : String
                                                                                                                                                                                                                                                                                                                                    AWS EB Application Name (e.g.: "myapp")
                                                                                                                                                                                                                                                                                                                                  • versionLabelFormat : String
                                                                                                                                                                                                                                                                                                                                    How to set the version label? For instance, for "${GIT_COMMIT}-${BUILD_TAG}", and with "Key Prefix" set to "myapp/builds/myapp-prod-env/", the S3 Object Key is set to myapp/builds/myapp-prod-env/4b5f7669b3376a1ce504bf7ef8bf7aeee9d21746-myjob-41.zip and the version Label will be 4b5f7669b3376a1ce504bf7ef8bf7aeee9d21746-myjob-41 on AWS EB Application Versions
                                                                                                                                                                                                                                                                                                                                  • versionDescriptionFormat : String
                                                                                                                                                                                                                                                                                                                                    Sets the description of the version to be published. Jenkins environment variables are supported such as ${GIT_BRANCH} - ${BUILD_TAG}
                                                                                                                                                                                                                                                                                                                                  • failOnError : boolean
                                                                                                                                                                                                                                                                                                                                    If any of the environments fail to update, or if there are no matching environments then fail the build.
                                                                                                                                                                                                                                                                                                                                  • extensions
                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                    • $class: 'AWSEBElasticBeanstalkSetup'
                                                                                                                                                                                                                                                                                                                                    • $class: 'AWSEBS3Setup'
                                                                                                                                                                                                                                                                                                                                      • bucketName : String
                                                                                                                                                                                                                                                                                                                                        S3 Bucket Name to Upload to (e.g. "my-awseb-apps")
                                                                                                                                                                                                                                                                                                                                      • bucketRegion : String
                                                                                                                                                                                                                                                                                                                                        S3 Bucket Region (e.g. us-east-1) This will be the same region set for the Elastic Beanstalk application if none is specified.
                                                                                                                                                                                                                                                                                                                                      • keyPrefix : String
                                                                                                                                                                                                                                                                                                                                        Prefix for newly created apps on S3 Bucket. For Example, myapp/builds/myapp-prod-env/
                                                                                                                                                                                                                                                                                                                                      • rootObject : String

                                                                                                                                                                                                                                                                                                                                        Root Path to Grab for Artifacts, like '.' or 'target/myapp/'.

                                                                                                                                                                                                                                                                                                                                        It could be either a path to a zip file or a directory.

                                                                                                                                                                                                                                                                                                                                        If its a directory, includes and excludes are used to build the zip file

                                                                                                                                                                                                                                                                                                                                      • includes : String
                                                                                                                                                                                                                                                                                                                                        Optional (if rootObject points to a directory): Glob for Zip Includes, comma-separated like 'target/file,target/myapp/**/*'
                                                                                                                                                                                                                                                                                                                                      • excludes : String
                                                                                                                                                                                                                                                                                                                                        Optional (if rootObject points to a directory): Glob for Zip Excludes, comma-separated eg '**/.git/**/*,**/node_modules/**/*'
                                                                                                                                                                                                                                                                                                                                      • overwriteExistingFile : boolean
                                                                                                                                                                                                                                                                                                                                      • useTransferAcceleration : boolean
                                                                                                                                                                                                                                                                                                                                        If enabled on the bucket, uses transfer acceleration to upload artifacts quicker. This may incur additional AWS costs.
                                                                                                                                                                                                                                                                                                                                    • $class: 'ByName'
                                                                                                                                                                                                                                                                                                                                      • envNameList : String
                                                                                                                                                                                                                                                                                                                                        Optional: Newline separated list of AWS EB Environment Names for the Application (e.g.: "myapp-prod-env").
                                                                                                                                                                                                                                                                                                                                        When set and Environment Name exists, it will trigger a UpdateEnvironment Call when the Application Version is created.
                                                                                                                                                                                                                                                                                                                                        If not set, then all environments under the Application will be updated together.
                                                                                                                                                                                                                                                                                                                                    • $class: 'ByUrl'
                                                                                                                                                                                                                                                                                                                                      • urlList : String
                                                                                                                                                                                                                                                                                                                                        Optional: Newline separated list of AWS EB Environment url, or CNAMEs for the Application (e.g.: "myapp-prod-env.elasticbeanstalk.com").
                                                                                                                                                                                                                                                                                                                                        When set and Environment Name exists, it will trigger a UpdateEnvironment Call when the Application Version is created.
                                                                                                                                                                                                                                                                                                                                        If not set, then all environments under the Application will be updated together.
                                                                                                                                                                                                                                                                                                                                  • envLookup
                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                    • $class: 'AWSEBElasticBeanstalkSetup'
                                                                                                                                                                                                                                                                                                                                    • $class: 'AWSEBS3Setup'
                                                                                                                                                                                                                                                                                                                                      • bucketName : String
                                                                                                                                                                                                                                                                                                                                        S3 Bucket Name to Upload to (e.g. "my-awseb-apps")
                                                                                                                                                                                                                                                                                                                                      • bucketRegion : String
                                                                                                                                                                                                                                                                                                                                        S3 Bucket Region (e.g. us-east-1) This will be the same region set for the Elastic Beanstalk application if none is specified.
                                                                                                                                                                                                                                                                                                                                      • keyPrefix : String
                                                                                                                                                                                                                                                                                                                                        Prefix for newly created apps on S3 Bucket. For Example, myapp/builds/myapp-prod-env/
                                                                                                                                                                                                                                                                                                                                      • rootObject : String

                                                                                                                                                                                                                                                                                                                                        Root Path to Grab for Artifacts, like '.' or 'target/myapp/'.

                                                                                                                                                                                                                                                                                                                                        It could be either a path to a zip file or a directory.

                                                                                                                                                                                                                                                                                                                                        If its a directory, includes and excludes are used to build the zip file

                                                                                                                                                                                                                                                                                                                                      • includes : String
                                                                                                                                                                                                                                                                                                                                        Optional (if rootObject points to a directory): Glob for Zip Includes, comma-separated like 'target/file,target/myapp/**/*'
                                                                                                                                                                                                                                                                                                                                      • excludes : String
                                                                                                                                                                                                                                                                                                                                        Optional (if rootObject points to a directory): Glob for Zip Excludes, comma-separated eg '**/.git/**/*,**/node_modules/**/*'
                                                                                                                                                                                                                                                                                                                                      • overwriteExistingFile : boolean
                                                                                                                                                                                                                                                                                                                                      • useTransferAcceleration : boolean
                                                                                                                                                                                                                                                                                                                                        If enabled on the bucket, uses transfer acceleration to upload artifacts quicker. This may incur additional AWS costs.
                                                                                                                                                                                                                                                                                                                                    • $class: 'ByName'
                                                                                                                                                                                                                                                                                                                                      • envNameList : String
                                                                                                                                                                                                                                                                                                                                        Optional: Newline separated list of AWS EB Environment Names for the Application (e.g.: "myapp-prod-env").
                                                                                                                                                                                                                                                                                                                                        When set and Environment Name exists, it will trigger a UpdateEnvironment Call when the Application Version is created.
                                                                                                                                                                                                                                                                                                                                        If not set, then all environments under the Application will be updated together.
                                                                                                                                                                                                                                                                                                                                    • $class: 'ByUrl'
                                                                                                                                                                                                                                                                                                                                      • urlList : String
                                                                                                                                                                                                                                                                                                                                        Optional: Newline separated list of AWS EB Environment url, or CNAMEs for the Application (e.g.: "myapp-prod-env.elasticbeanstalk.com").
                                                                                                                                                                                                                                                                                                                                        When set and Environment Name exists, it will trigger a UpdateEnvironment Call when the Application Version is created.
                                                                                                                                                                                                                                                                                                                                        If not set, then all environments under the Application will be updated together.
                                                                                                                                                                                                                                                                                                                              • $class: 'AWSEBDeploymentBuilder'
                                                                                                                                                                                                                                                                                                                                • config
                                                                                                                                                                                                                                                                                                                                  • Type: class br.com.ingenieux.jenkins.plugins.awsebdeployment.AWSEBDeploymentConfig
                                                                                                                                                                                                                                                                                                                                • applicationName : String (optional)
                                                                                                                                                                                                                                                                                                                                  AWS EB Application Name (e.g.: "myapp")
                                                                                                                                                                                                                                                                                                                                • awsRegion : String (optional)
                                                                                                                                                                                                                                                                                                                                  AWS Region (e.g. us-east-1)
                                                                                                                                                                                                                                                                                                                                • bucketName : String (optional)

                                                                                                                                                                                                                                                                                                                                  S3 Bucket Name to Upload to (e.g. "my-awseb-apps")

                                                                                                                                                                                                                                                                                                                                  (Optional, will call createStorageLocation if blank)

                                                                                                                                                                                                                                                                                                                                • checkHealth : boolean (optional)
                                                                                                                                                                                                                                                                                                                                  Uncheck this to disable the Health check on deploy. Some implementations may not care to wait until the environment shows "Green".
                                                                                                                                                                                                                                                                                                                                • credentialId : String (optional)
                                                                                                                                                                                                                                                                                                                                  Select the credentials to use.
                                                                                                                                                                                                                                                                                                                                • environmentName : String (optional)

                                                                                                                                                                                                                                                                                                                                  Optional: AWS EB Environment name(s) to deploy to.

                                                                                                                                                                                                                                                                                                                                  Can accept single or multiple comma-separated values. Examples:

                                                                                                                                                                                                                                                                                                                                  • "my-prod-env" (single environment)
                                                                                                                                                                                                                                                                                                                                  • "my-dev-env,my-staging-env" (multiple environments)

                                                                                                                                                                                                                                                                                                                                  When this value is set and each requested environment exists, an UpdateEnvironment call will be triggered as the Application Version is created.

                                                                                                                                                                                                                                                                                                                                • excludes : String (optional)
                                                                                                                                                                                                                                                                                                                                  Optional (if rootObject points to a directory): Glob for Zip Excludes, comma-separated eg '**/.git/**/*,**/node_modules/**/*'
                                                                                                                                                                                                                                                                                                                                • includes : String (optional)
                                                                                                                                                                                                                                                                                                                                  Optional (if rootObject points to a directory): Glob for Zip Includes, comma-separated like 'target/file,target/myapp/**/*'
                                                                                                                                                                                                                                                                                                                                • keyPrefix : String (optional)
                                                                                                                                                                                                                                                                                                                                  Prefix for newly created apps on S3 Bucket. For Example, myapp/builds/myapp-prod-env/
                                                                                                                                                                                                                                                                                                                                • maxAttempts : int (optional)
                                                                                                                                                                                                                                                                                                                                • rootObject : String (optional)

                                                                                                                                                                                                                                                                                                                                  Workspace-relative path of the artifact file to upload (if it's a file), or if it's a directory, the base directory to build the zip/war against

                                                                                                                                                                                                                                                                                                                                  Examples:

                                                                                                                                                                                                                                                                                                                                  • File, like target/mywebapp.war: The war file will be uploaded
                                                                                                                                                                                                                                                                                                                                  • A Directory, like '.' or 'target/war': A Zip file will be built and uploaded instead (using includes and excludes).
                                                                                                                                                                                                                                                                                                                                • skipEnvironmentUpdates : boolean (optional)
                                                                                                                                                                                                                                                                                                                                • sleepTime : int (optional)
                                                                                                                                                                                                                                                                                                                                • versionDescriptionFormat : String (optional)
                                                                                                                                                                                                                                                                                                                                  How to set the version description? For instance, for "${GIT_COMMIT}", the version Description will be 4b5f7669b3376a1ce504bf7ef8bf7aeee9d21746 on AWS EB Application Versions
                                                                                                                                                                                                                                                                                                                                • versionLabelFormat : String (optional)
                                                                                                                                                                                                                                                                                                                                  How to set the version label? For instance, for "${GIT_COMMIT}-${BUILD_TAG}", and with "Key Prefix" set to "myapp/builds/myapp-prod-env/", the S3 Object Key is set to myapp/builds/myapp-prod-env/4b5f7669b3376a1ce504bf7ef8bf7aeee9d21746-myjob-41.zip and the version Label will be 4b5f7669b3376a1ce504bf7ef8bf7aeee9d21746-myjob-41 on AWS EB Application Versions
                                                                                                                                                                                                                                                                                                                                • zeroDowntime : boolean (optional)
                                                                                                                                                                                                                                                                                                                              • awsebReleaser
                                                                                                                                                                                                                                                                                                                                • credentialId : String
                                                                                                                                                                                                                                                                                                                                  Select the credentials to use.
                                                                                                                                                                                                                                                                                                                                • awsRegion : String
                                                                                                                                                                                                                                                                                                                                  AWS Region.
                                                                                                                                                                                                                                                                                                                                • applicationName : String
                                                                                                                                                                                                                                                                                                                                  AWS EB Application Name (e.g.: "myapp").
                                                                                                                                                                                                                                                                                                                                • environmentId : String
                                                                                                                                                                                                                                                                                                                                  AWS EB Environment name to deploy to.
                                                                                                                                                                                                                                                                                                                                • versionLabel : String
                                                                                                                                                                                                                                                                                                                              • abapCi
                                                                                                                                                                                                                                                                                                                                • abapPackagename : String (optional)
                                                                                                                                                                                                                                                                                                                                • atcVariant : String (optional)
                                                                                                                                                                                                                                                                                                                                • sapSystemLabel : String (optional)
                                                                                                                                                                                                                                                                                                                                • runAtcChecks : boolean (optional)
                                                                                                                                                                                                                                                                                                                                • runUnitTests : boolean (optional)
                                                                                                                                                                                                                                                                                                                                • treatWarningAtcChecksAsErrors : boolean (optional)
                                                                                                                                                                                                                                                                                                                                • useJenkinsProjectName : boolean (optional)
                                                                                                                                                                                                                                                                                                                                • withCoverage : boolean (optional)
                                                                                                                                                                                                                                                                                                                              • $class: 'ActionHubPlugin'
                                                                                                                                                                                                                                                                                                                                • snActivatePlugin
                                                                                                                                                                                                                                                                                                                                  • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                    User name and password defined in global credentials (credentials ID is required here).
                                                                                                                                                                                                                                                                                                                                    This field cannot be empty. It doesn't use global settings from ServiceNow Parameters.
                                                                                                                                                                                                                                                                                                                                  • apiVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                    Optional. Version of the endpoint to access. For example, v1 or v2. Only specify this value to use an endpoint version other than the latest.
                                                                                                                                                                                                                                                                                                                                  • pluginId : String (optional)
                                                                                                                                                                                                                                                                                                                                    Unique identifier of the plugin. You can locate this identifier on the Plugins page within the card of the desired plugin; identified with the name "ID".
                                                                                                                                                                                                                                                                                                                                  • url : String (optional)
                                                                                                                                                                                                                                                                                                                                    ServiceNow instance url. This field cannot be empty. It doesn't use global settings from ServiceNow Parameters.
                                                                                                                                                                                                                                                                                                                                • $class: 'AddComment'
                                                                                                                                                                                                                                                                                                                                  • prefix : String
                                                                                                                                                                                                                                                                                                                                    Enter the syntax. Example: P1#I10 (P3 - Project ID, I10 - Item ID). You can only add a comment up to 10 items.
                                                                                                                                                                                                                                                                                                                                  • note : String
                                                                                                                                                                                                                                                                                                                                    Any malicious content will be automatically removed.
                                                                                                                                                                                                                                                                                                                                  • logfile : String
                                                                                                                                                                                                                                                                                                                                    Upload the build log file as an attachment.
                                                                                                                                                                                                                                                                                                                                • $class: 'AddTestToSetStep'
                                                                                                                                                                                                                                                                                                                                  • domain : String
                                                                                                                                                                                                                                                                                                                                    HP ALM Domain
                                                                                                                                                                                                                                                                                                                                  • project : String
                                                                                                                                                                                                                                                                                                                                    HP ALM Project name
                                                                                                                                                                                                                                                                                                                                  • testPlanPath : String
                                                                                                                                                                                                                                                                                                                                    Path to a test or test folder in HP ALM which shall be added to a test set
                                                                                                                                                                                                                                                                                                                                  • testSetPath : String
                                                                                                                                                                                                                                                                                                                                    Path to a test set in HP ALM into which test(s) shall be added
                                                                                                                                                                                                                                                                                                                                • $class: 'AmxEclipseAntBuilder'
                                                                                                                                                                                                                                                                                                                                  • targets : String
                                                                                                                                                                                                                                                                                                                                    Specify a list of Ant targets to be invoked over Tibco amx_eclipse_ant wrapper, or leave it empty to invoke the default Ant target specified in the build script. Additionally, you can also use this field to specify other Ant options.
                                                                                                                                                                                                                                                                                                                                  • name : String
                                                                                                                                                                                                                                                                                                                                    For projects that need to use TIBCO amx_eclipse_ant wrapper as the build system. This causes Jenkins to invoke amx_eclipse_ant with the given targets and options. Any non-zero exit code causes Jenkins to mark the build as a failure.

                                                                                                                                                                                                                                                                                                                                    Jenkins supplies some environment variables that can be used from within the build script.

                                                                                                                                                                                                                                                                                                                                  • antOpts : String
                                                                                                                                                                                                                                                                                                                                    If your build requires a custom ANT_OPTS, specify it here. Please refer to TIBCO Documentation for any detail
                                                                                                                                                                                                                                                                                                                                  • buildFile : String
                                                                                                                                                                                                                                                                                                                                    If your build requires a custom -buildfile, specify it here. By default amx_eclipse_ant will use the build.xml in the root directory; this option can be used to use build files with a different name or in a subdirectory. Please refer to TIBCO Documentation for any detail
                                                                                                                                                                                                                                                                                                                                  • properties : String
                                                                                                                                                                                                                                                                                                                                    Properties needed by your ant build can be specified here (in standard properties file format):
                                                                                                                                                                                                                                                                                                                                    # comment
                                                                                                                                                                                                                                                                                                                                    name1=value1
                                                                                                                                                                                                                                                                                                                                    name2=$VAR2
                                                                                                                                                                                                                                                                                                                                    
                                                                                                                                                                                                                                                                                                                                    These are passed to amx_eclipse_ant like "-Dname1=value1 -Dname2=value2". Always use $VAR style (even on Windows) for references to Jenkins-defined environment variables. On Windows, %VAR% style references may be used for environment variables that exist outside of Jenkins. Backslashes are used for escaping, so use \\ for a single backslash. Double quotes (") should be avoided, as amx_eclipse_ant on *nix wraps parameters in quotes quotes and runs them through eval, and Windows has its own issues with escaping.. in either case, use of quotes may result in build failure. To define an empty property, simply write varname= Please refer to TIBCO Documentation for any detail
                                                                                                                                                                                                                                                                                                                                  • amxEclipseAntTra : String
                                                                                                                                                                                                                                                                                                                                    If your build requires a custom TRA properties file, specify it here. Please refer to TIBCO Documentation for any detail.
                                                                                                                                                                                                                                                                                                                                  • businessStudioWs : String
                                                                                                                                                                                                                                                                                                                                    If your build requires a custom Business Studio workspace to use, specify it here. By default amx_eclipse_ant use user home as location for "workspace"" creation. this option force amx_eclipse_ant to use a custom workspace by flag "-data 'your-custom-ws'" Please refer to TIBCO Documentation for any detail.
                                                                                                                                                                                                                                                                                                                                • anchore
                                                                                                                                                                                                                                                                                                                                  • name : String
                                                                                                                                                                                                                                                                                                                                    Name of the file that contains a list of container images for anchore to analyze, evaluate policy, and run queries against. The format for each line is "imageId /path/to/Dockerfile", where the Dockerfile is optional. This file must be made available (created by a prior step) to Anchore Container Image Scanner plugin.
                                                                                                                                                                                                                                                                                                                                  • annotations (optional)
                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                    • key : String
                                                                                                                                                                                                                                                                                                                                    • value : String
                                                                                                                                                                                                                                                                                                                                  • autoSubscribeTagUpdates : boolean (optional)
                                                                                                                                                                                                                                                                                                                                    If selected or set to 'true', the Anchore Container Image Scanner step will instruct Anchore Engine to automatically begin watching the added tag for updates from registry. Default value: 'true'
                                                                                                                                                                                                                                                                                                                                  • bailOnFail : boolean (optional)
                                                                                                                                                                                                                                                                                                                                    If selected or set to 'true', the Anchore Container Image Scanner step will cause the build to fail if the policy evaluation result is FAIL. Default value: 'true'
                                                                                                                                                                                                                                                                                                                                  • bailOnPluginFail : boolean (optional)
                                                                                                                                                                                                                                                                                                                                    If selected or set to 'true', the Anchore Container Image Scanner step will cause the build to fail if the plugin encounters an error. Default value: 'true'
                                                                                                                                                                                                                                                                                                                                  • engineCredentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                  • engineRetries : String (optional)
                                                                                                                                                                                                                                                                                                                                    Number of polling attempts spaced at 5 second intervals spent waiting for the Anchore Engine operation to complete.
                                                                                                                                                                                                                                                                                                                                  • engineurl : String (optional)
                                                                                                                                                                                                                                                                                                                                    Anchore Engine URL
                                                                                                                                                                                                                                                                                                                                  • engineverify : boolean (optional)
                                                                                                                                                                                                                                                                                                                                  • forceAnalyze : boolean (optional)
                                                                                                                                                                                                                                                                                                                                    If selected or set to 'true', the Anchore Container Image Scanner step will instruct Anchore Engine to force analyze the image. Default value: 'false'
                                                                                                                                                                                                                                                                                                                                  • policyBundleId : String (optional)
                                                                                                                                                                                                                                                                                                                                    ID of the policy bundle on Anchore Engine to be used for policy evaluations. If empty, the policy bundle marked active on Anchore Engine will be used by default.
                                                                                                                                                                                                                                                                                                                                • $class: 'AnsibleAdHocCommandBuilder'
                                                                                                                                                                                                                                                                                                                                  • hostPattern : String
                                                                                                                                                                                                                                                                                                                                    The host or set of hosts on which the command will be executed. For more details see the ansible documentation for Patterns.
                                                                                                                                                                                                                                                                                                                                  • inventory
                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                    • $class: 'InventoryContent'
                                                                                                                                                                                                                                                                                                                                      • content : String
                                                                                                                                                                                                                                                                                                                                      • dynamic : boolean
                                                                                                                                                                                                                                                                                                                                        Check this box if a dynamic inventory is used. For more details see the ansible documentation for Dynamic Inventory
                                                                                                                                                                                                                                                                                                                                    • $class: 'InventoryDoNotSpecify'
                                                                                                                                                                                                                                                                                                                                      • $class: 'InventoryPath'
                                                                                                                                                                                                                                                                                                                                        • path : String
                                                                                                                                                                                                                                                                                                                                          Specify the inventory host path or a comma separated host list
                                                                                                                                                                                                                                                                                                                                    • module : String
                                                                                                                                                                                                                                                                                                                                      Module name to execute. The shell module is used when left empty.
                                                                                                                                                                                                                                                                                                                                    • command : String
                                                                                                                                                                                                                                                                                                                                      Module arguments or shell command to execute
                                                                                                                                                                                                                                                                                                                                    • additionalParameters : String (optional)
                                                                                                                                                                                                                                                                                                                                      Any additional parameters to pass to the ansible command.

                                                                                                                                                                                                                                                                                                                                      Warning:

                                                                                                                                                                                                                                                                                                                                      The content of this textbox will be passed as is to the command line.
                                                                                                                                                                                                                                                                                                                                    • ansibleName : String (optional)
                                                                                                                                                                                                                                                                                                                                    • becomeUser : String (optional)
                                                                                                                                                                                                                                                                                                                                      Desired become user. "root" is used when this field is empty.
                                                                                                                                                                                                                                                                                                                                    • colorizedOutput : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      Check this box to allow ansible to render ANSI color codes in the Jenkins console. This option works well with the Jenkins AnsiColor plugin.
                                                                                                                                                                                                                                                                                                                                    • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                      Select the credentials for the SSH connections. Only private key authentication is supported.
                                                                                                                                                                                                                                                                                                                                    • disableHostKeyChecking : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      Check this box if you really want to disable the validation of the hosts SSH server keys.
                                                                                                                                                                                                                                                                                                                                    • extraVars (optional)
                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                      • hidden : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      • key : String (optional)
                                                                                                                                                                                                                                                                                                                                      • value : String (optional)
                                                                                                                                                                                                                                                                                                                                    • forks : int (optional)
                                                                                                                                                                                                                                                                                                                                      Specify number of parallel processes to use. Set to 0 to use the default value.
                                                                                                                                                                                                                                                                                                                                    • hostKeyChecking : boolean (optional)
                                                                                                                                                                                                                                                                                                                                    • sudo : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      Run operations with sudo. It works only when the remote user is sudoer with nopasswd option. Sudo has been deprecated in favor of become and will be removed in Ansible 2.6.
                                                                                                                                                                                                                                                                                                                                    • sudoUser : String (optional)
                                                                                                                                                                                                                                                                                                                                      Desired sudo user. "root" is used when this field is empty. Sudo has been deprecated in favor of become and will be removed in Ansible 2.6.
                                                                                                                                                                                                                                                                                                                                    • unbufferedOutput : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      Skip standard output buffering for the ansible process. The ansible output is directly rendered into the Jenkins console. This option can be usefull for long running operations.
                                                                                                                                                                                                                                                                                                                                    • vaultCredentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                      Select the credentials for vault encrypted vars. Only secret file and secret text are supported.
                                                                                                                                                                                                                                                                                                                                  • cfyAnsible
                                                                                                                                                                                                                                                                                                                                    • additionalArgs : String (optional)
                                                                                                                                                                                                                                                                                                                                    • ansibleEnvVars : String (optional)
                                                                                                                                                                                                                                                                                                                                    • credentialsId : String (optional)

                                                                                                                                                                                                                                                                                                                                      The ID of the credentials to use when accessing Cloudify. Parameters' expansion is supported when using freestyle jobs.

                                                                                                                                                                                                                                                                                                                                    • debugLevel : int (optional)
                                                                                                                                                                                                                                                                                                                                    • debugOutput : boolean (optional)
                                                                                                                                                                                                                                                                                                                                    • deploymentId : String (optional)
                                                                                                                                                                                                                                                                                                                                    • echoEnvData : boolean (optional)
                                                                                                                                                                                                                                                                                                                                    • echoInputs : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      If checked, then the Cloudify deployment inputs are echoed to the Jenkins log.
                                                                                                                                                                                                                                                                                                                                    • envDataLocation : String (optional)
                                                                                                                                                                                                                                                                                                                                    • optionsConfig : String (optional)
                                                                                                                                                                                                                                                                                                                                    • playbookPath : String (optional)
                                                                                                                                                                                                                                                                                                                                    • remergeSources : boolean (optional)
                                                                                                                                                                                                                                                                                                                                    • runData : String (optional)
                                                                                                                                                                                                                                                                                                                                    • savePlaybook : boolean (optional)
                                                                                                                                                                                                                                                                                                                                    • scpExtraArgs : String (optional)
                                                                                                                                                                                                                                                                                                                                    • sensitiveKeys : String (optional)
                                                                                                                                                                                                                                                                                                                                    • sftpExtraArgs : String (optional)
                                                                                                                                                                                                                                                                                                                                    • sourcePath : String (optional)
                                                                                                                                                                                                                                                                                                                                    • sources : String (optional)
                                                                                                                                                                                                                                                                                                                                    • sshCommonArgs : String (optional)
                                                                                                                                                                                                                                                                                                                                    • sshExtraArgs : String (optional)
                                                                                                                                                                                                                                                                                                                                    • startAtTask : String (optional)
                                                                                                                                                                                                                                                                                                                                    • tenant : String (optional)
                                                                                                                                                                                                                                                                                                                                    • timeout : int (optional)
                                                                                                                                                                                                                                                                                                                                  • $class: 'AnsiblePlaybookBuilder'
                                                                                                                                                                                                                                                                                                                                    • playbook : String
                                                                                                                                                                                                                                                                                                                                      Path to the ansible playbook file. The path can be absolute or relative to the job workspace.
                                                                                                                                                                                                                                                                                                                                    • inventory
                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                      • $class: 'InventoryContent'
                                                                                                                                                                                                                                                                                                                                        • content : String
                                                                                                                                                                                                                                                                                                                                        • dynamic : boolean
                                                                                                                                                                                                                                                                                                                                          Check this box if a dynamic inventory is used. For more details see the ansible documentation for Dynamic Inventory
                                                                                                                                                                                                                                                                                                                                      • $class: 'InventoryDoNotSpecify'
                                                                                                                                                                                                                                                                                                                                        • $class: 'InventoryPath'
                                                                                                                                                                                                                                                                                                                                          • path : String
                                                                                                                                                                                                                                                                                                                                            Specify the inventory host path or a comma separated host list
                                                                                                                                                                                                                                                                                                                                      • additionalParameters : String (optional)
                                                                                                                                                                                                                                                                                                                                        Any additional parameters to pass to the ansible command.

                                                                                                                                                                                                                                                                                                                                        Warning:

                                                                                                                                                                                                                                                                                                                                        The content of this textbox will be passed as is to the command line.
                                                                                                                                                                                                                                                                                                                                      • ansibleName : String (optional)
                                                                                                                                                                                                                                                                                                                                      • becomeUser : String (optional)
                                                                                                                                                                                                                                                                                                                                        Desired become user. "root" is used when this field is empty.
                                                                                                                                                                                                                                                                                                                                      • colorizedOutput : boolean (optional)
                                                                                                                                                                                                                                                                                                                                        Check this box to allow ansible to render ANSI color codes in the Jenkins console. This option works well with the Jenkins AnsiColor plugin.
                                                                                                                                                                                                                                                                                                                                      • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                        Select the credentials for the SSH connections. Only private key authentication is supported.
                                                                                                                                                                                                                                                                                                                                      • disableHostKeyChecking : boolean (optional)
                                                                                                                                                                                                                                                                                                                                        Check this box if you really want to disable the validation of the hosts SSH server keys.
                                                                                                                                                                                                                                                                                                                                      • extraVars (optional)
                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                        • hidden : boolean (optional)
                                                                                                                                                                                                                                                                                                                                        • key : String (optional)
                                                                                                                                                                                                                                                                                                                                        • value : String (optional)
                                                                                                                                                                                                                                                                                                                                      • forks : int (optional)
                                                                                                                                                                                                                                                                                                                                        Specify number of parallel processes to use. Set to 0 to use the default value.
                                                                                                                                                                                                                                                                                                                                      • hostKeyChecking : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      • limit : String (optional)
                                                                                                                                                                                                                                                                                                                                        Further limit selected hosts to an additional pattern.
                                                                                                                                                                                                                                                                                                                                      • skippedTags : String (optional)
                                                                                                                                                                                                                                                                                                                                        only run plays and tasks whose tags do not match these values.
                                                                                                                                                                                                                                                                                                                                      • startAtTask : String (optional)
                                                                                                                                                                                                                                                                                                                                        Start the playbook at the task matching this name.
                                                                                                                                                                                                                                                                                                                                      • sudo : boolean (optional)
                                                                                                                                                                                                                                                                                                                                        Run operations with sudo. It works only when the remote user is sudoer with nopasswd option. Sudo has been deprecated in favor of become and will be removed in Ansible 2.6.
                                                                                                                                                                                                                                                                                                                                      • sudoUser : String (optional)
                                                                                                                                                                                                                                                                                                                                        Desired sudo user. "root" is used when this field is empty. Sudo has been deprecated in favor of become and will be removed in Ansible 2.6.
                                                                                                                                                                                                                                                                                                                                      • tags : String (optional)
                                                                                                                                                                                                                                                                                                                                        Only run plays and tasks tagged with these values.
                                                                                                                                                                                                                                                                                                                                      • unbufferedOutput : boolean (optional)
                                                                                                                                                                                                                                                                                                                                        Skip standard output buffering for the ansible process. The ansible output is directly rendered into the Jenkins console. This option can be usefull for long running operations.
                                                                                                                                                                                                                                                                                                                                      • vaultCredentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                        Select the credentials for vault encrypted vars. Only secret file and secret text are supported.
                                                                                                                                                                                                                                                                                                                                    • $class: 'AnsibleTower'
                                                                                                                                                                                                                                                                                                                                      • towerServer : String (optional)
                                                                                                                                                                                                                                                                                                                                      • jobTemplate : String (optional)
                                                                                                                                                                                                                                                                                                                                      • towerCredentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                      • jobType : String (optional)
                                                                                                                                                                                                                                                                                                                                      • extraVars : String (optional)
                                                                                                                                                                                                                                                                                                                                      • jobTags : String (optional)
                                                                                                                                                                                                                                                                                                                                      • skipJobTags : String (optional)
                                                                                                                                                                                                                                                                                                                                      • limit : String (optional)
                                                                                                                                                                                                                                                                                                                                      • inventory : String (optional)
                                                                                                                                                                                                                                                                                                                                      • credential : String (optional)
                                                                                                                                                                                                                                                                                                                                      • scmBranch : String (optional)
                                                                                                                                                                                                                                                                                                                                      • verbose : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      • importTowerLogs : String (optional)
                                                                                                                                                                                                                                                                                                                                      • removeColor : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      • templateType : String (optional)
                                                                                                                                                                                                                                                                                                                                      • importWorkflowChildLogs : boolean (optional)
                                                                                                                                                                                                                                                                                                                                    • $class: 'AnsibleTowerProjectRevisionFreestyle'
                                                                                                                                                                                                                                                                                                                                      • towerServer : String (optional)
                                                                                                                                                                                                                                                                                                                                      • towerCredentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                      • project : String (optional)
                                                                                                                                                                                                                                                                                                                                      • revision : String (optional)
                                                                                                                                                                                                                                                                                                                                      • verbose : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      • throwExceptionWhenFail : boolean (optional)
                                                                                                                                                                                                                                                                                                                                    • $class: 'AnsibleTowerProjectSyncFreestyle'
                                                                                                                                                                                                                                                                                                                                      • towerServer : String (optional)
                                                                                                                                                                                                                                                                                                                                      • towerCredentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                      • project : String (optional)
                                                                                                                                                                                                                                                                                                                                      • verbose : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      • importTowerLogs : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      • removeColor : boolean (optional)
                                                                                                                                                                                                                                                                                                                                    • $class: 'AnsibleVaultBuilder'
                                                                                                                                                                                                                                                                                                                                      • action : String (optional)
                                                                                                                                                                                                                                                                                                                                        Desired vault action.
                                                                                                                                                                                                                                                                                                                                      • ansibleName : String (optional)
                                                                                                                                                                                                                                                                                                                                      • content : String (optional)
                                                                                                                                                                                                                                                                                                                                        Desired encrypted content.
                                                                                                                                                                                                                                                                                                                                      • input : String (optional)
                                                                                                                                                                                                                                                                                                                                        Desired input file to encrypt.
                                                                                                                                                                                                                                                                                                                                      • newVaultCredentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                        Select the credentials for rekeying vault encrypted files. Only Jenkins secret file and secret text are supported.
                                                                                                                                                                                                                                                                                                                                      • output : String (optional)
                                                                                                                                                                                                                                                                                                                                        Desired output file for encrypted content.
                                                                                                                                                                                                                                                                                                                                      • vaultCredentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                        Select the credentials for vault encrypted vars. Only Jenkins secret file and secret text are supported.
                                                                                                                                                                                                                                                                                                                                    • ant
                                                                                                                                                                                                                                                                                                                                      For projects that use Ant as the build system. This causes Jenkins to invoke Ant with the given targets and options. Any non-zero exit code causes Jenkins to mark the build as a failure.

                                                                                                                                                                                                                                                                                                                                      Jenkins supplies some environment variables that can be used from within the build script.

                                                                                                                                                                                                                                                                                                                                      • targets : String
                                                                                                                                                                                                                                                                                                                                        Specify a list of Ant targets to be invoked (separated by spaces), or leave it empty to invoke the default Ant target specified in the build script. Additionally, you can also use this field to specify other Ant options.
                                                                                                                                                                                                                                                                                                                                      • antName : String
                                                                                                                                                                                                                                                                                                                                      • antOpts : String
                                                                                                                                                                                                                                                                                                                                        If your build requires a custom ANT_OPTS, specify it here. Typically this may be used to specify java memory limits to use, for example -Xmx512m. Note that other Ant options (such as -lib) should go to the "Ant targets" field.
                                                                                                                                                                                                                                                                                                                                      • buildFile : String
                                                                                                                                                                                                                                                                                                                                        If your build requires a custom -buildfile, specify it here. By default Ant will use the build.xml in the root directory; this option can be used to use build files with a different name or in a subdirectory.
                                                                                                                                                                                                                                                                                                                                      • properties : String
                                                                                                                                                                                                                                                                                                                                        Properties needed by your ant build can be specified here (in standard properties file format):
                                                                                                                                                                                                                                                                                                                                        # comment
                                                                                                                                                                                                                                                                                                                                        name1=value1
                                                                                                                                                                                                                                                                                                                                        name2=$VAR2
                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                        These are passed to Ant like "-Dname1=value1 -Dname2=value2". Always use $VAR style (even on Windows) for references to Jenkins-defined environment variables. On Windows, %VAR% style references may be used for environment variables that exist outside of Jenkins. Backslashes are used for escaping, so use \\ for a single backslash. Double quotes (") should be avoided, as ant on *nix wraps parameters in quotes and runs them through eval, and Windows has its own issues with escaping. In either case, use of quotes may result in build failure. To define an empty property, simply write varname=
                                                                                                                                                                                                                                                                                                                                    • $class: 'AntExec'
                                                                                                                                                                                                                                                                                                                                      • scriptSource : String
                                                                                                                                                                                                                                                                                                                                        Runs entered Apache Ant tasks as a build file with only one target, untill you write code into the "Extended script source", but the target created from this code will always be the default target of the created build file.

                                                                                                                                                                                                                                                                                                                                        The script will run with WORKSPACE as the current directory. Build will be considered as failure if any Ant task fails. You can use Ant-Contrib tasks (if it is enabled in global configuration). You need to use namespace "antcontrib" (example: "<antcontrib:if>").
                                                                                                                                                                                                                                                                                                                                      • extendedScriptSource : String
                                                                                                                                                                                                                                                                                                                                        Into this field you can enter a code, you could not able to enter into the previous field, as it should not appear within the Ant target. The entries can be other targets, import/include tasks etc. With this extension you are able to create more complex Ant build file with just one limitation - the first field (textarea) must always be used for default Ant target. This field is optional.
                                                                                                                                                                                                                                                                                                                                      • scriptName : String
                                                                                                                                                                                                                                                                                                                                        Here you can enter the name for your new script. The name will be also used for default Ant target. This build file will then have a name that differs from the default name, so it will not be overwritten by the upcoming build step and therefore it might be used repeatedly, or it can be included/imported.
                                                                                                                                                                                                                                                                                                                                      • properties : String
                                                                                                                                                                                                                                                                                                                                        Properties needed by your ant build can be specified here (in standard properties file format):
                                                                                                                                                                                                                                                                                                                                        # comment
                                                                                                                                                                                                                                                                                                                                        name1=value1
                                                                                                                                                                                                                                                                                                                                        name2=$VAR2
                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                        These are passed to Ant like "-Dname1=value1 -Dname2=value2". Always use $VAR style (even on Windows) for references to Jenkins-defined environment variables. On Windows, %VAR% style references may be used for environment variables that exist outside of Jenkins. Backslashes are used for escaping, so use \\ for a single backslash. Double quotes (") should be avoided, as ant on *nix wraps parameters in quotes quotes and runs them through eval, and Windows has its own issues with escaping.. in either case, use of quotes may result in build failure. To define an empty property, simply write varname=
                                                                                                                                                                                                                                                                                                                                      • antName : String
                                                                                                                                                                                                                                                                                                                                      • antOpts : String
                                                                                                                                                                                                                                                                                                                                        If your build requires a custom ANT_OPTS, specify it here. Typically this may be used to specify java memory limits to use, for example -Xmx512m.
                                                                                                                                                                                                                                                                                                                                        Note that other Ant options (such as -lib) should not be here.
                                                                                                                                                                                                                                                                                                                                      • keepBuildfile : boolean
                                                                                                                                                                                                                                                                                                                                      • verbose : boolean
                                                                                                                                                                                                                                                                                                                                      • emacs : boolean
                                                                                                                                                                                                                                                                                                                                      • noAntcontrib : boolean

                                                                                                                                                                                                                                                                                                                                        Disabling usage of Ant-Contrib Tasks in this build step.

                                                                                                                                                                                                                                                                                                                                    • antws
                                                                                                                                                                                                                                                                                                                                      For projects that use Ant as the build system. This causes Jenkins to invoke Ant with the given targets and options. Any non-zero exit code causes Jenkins to mark the build as a failure.

                                                                                                                                                                                                                                                                                                                                      Jenkins supplies some environment variables that can be used from within the build script.

                                                                                                                                                                                                                                                                                                                                      • targets : String
                                                                                                                                                                                                                                                                                                                                        Specify a list of Ant targets to be invoked (separated by spaces), or leave it empty to invoke the default Ant target specified in the build script. Additionally, you can also use this field to specify other Ant options.
                                                                                                                                                                                                                                                                                                                                      • antName : String
                                                                                                                                                                                                                                                                                                                                      • antOpts : String
                                                                                                                                                                                                                                                                                                                                        If your build requires a custom ANT_OPTS, specify it here. Typically this may be used to specify java memory limits to use, for example -Xmx512m. Note that other Ant options (such as -lib) should go to the "Ant targets" field.
                                                                                                                                                                                                                                                                                                                                      • buildFile : String
                                                                                                                                                                                                                                                                                                                                        If your build requires a custom -buildfile, specify it here. By default Ant will use the build.xml in the root directory; this option can be used to use build files with a different name or in a subdirectory.
                                                                                                                                                                                                                                                                                                                                      • properties : String
                                                                                                                                                                                                                                                                                                                                        Properties needed by your ant build can be specified here (in standard properties file format):
                                                                                                                                                                                                                                                                                                                                        # comment
                                                                                                                                                                                                                                                                                                                                        name1=value1
                                                                                                                                                                                                                                                                                                                                        name2=$VAR2
                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                        These are passed to Ant like "-Dname1=value1 -Dname2=value2". Always use $VAR style (even on Windows) for references to Jenkins-defined environment variables. On Windows, %VAR% style references may be used for environment variables that exist outside of Jenkins. Backslashes are used for escaping, so use \\ for a single backslash. Double quotes (") should be avoided, as ant on *nix wraps parameters in quotes and runs them through eval, and Windows has its own issues with escaping. In either case, use of quotes may result in build failure. To define an empty property, simply write varname=
                                                                                                                                                                                                                                                                                                                                    • $class: 'ApiFortressBuilder'
                                                                                                                                                                                                                                                                                                                                      • mode : String
                                                                                                                                                                                                                                                                                                                                        When running in single test mode, once specific test will run. When running in automatch mode, a collection of tests will run.
                                                                                                                                                                                                                                                                                                                                      • hook : String
                                                                                                                                                                                                                                                                                                                                        The API Hook URL.
                                                                                                                                                                                                                                                                                                                                        API Hooks are unique urls connected to projects. They provide access to API Fortress automation API and will allow you to run tests.
                                                                                                                                                                                                                                                                                                                                        You can create one in the API Fortress Company dashboard.
                                                                                                                                                                                                                                                                                                                                      • id : String

                                                                                                                                                                                                                                                                                                                                        Test ID

                                                                                                                                                                                                                                                                                                                                        When running in Single Test mode, you have to provide the ID of the test you want to run. You can find this information in the interstitial page of the test.

                                                                                                                                                                                                                                                                                                                                        Automatch URL

                                                                                                                                                                                                                                                                                                                                        When running in Automatch mode, introduce here the URL of the resource that you are willing to test.

                                                                                                                                                                                                                                                                                                                                        Tag

                                                                                                                                                                                                                                                                                                                                        When running in tag mode, introduce the tag of the tests you want to run.

                                                                                                                                                                                                                                                                                                                                        Project

                                                                                                                                                                                                                                                                                                                                        When running in project mode, no value is required.
                                                                                                                                                                                                                                                                                                                                      • blocking : boolean
                                                                                                                                                                                                                                                                                                                                        Set this flag is a test failure must determine a build failure.
                                                                                                                                                                                                                                                                                                                                      • dryrun : boolean
                                                                                                                                                                                                                                                                                                                                        Set this flag if you don't want the event to be stored in API Fortress.
                                                                                                                                                                                                                                                                                                                                      • silent : boolean
                                                                                                                                                                                                                                                                                                                                        Set this flag if a failure should not generate API Fortress alerts.
                                                                                                                                                                                                                                                                                                                                      • param1name : String
                                                                                                                                                                                                                                                                                                                                      • param1value : String
                                                                                                                                                                                                                                                                                                                                      • param2name : String
                                                                                                                                                                                                                                                                                                                                      • param2value : String
                                                                                                                                                                                                                                                                                                                                      • param3name : String
                                                                                                                                                                                                                                                                                                                                      • param3value : String
                                                                                                                                                                                                                                                                                                                                    • appray
                                                                                                                                                                                                                                                                                                                                      • appRayUrl : String
                                                                                                                                                                                                                                                                                                                                        App-Ray instance URL. Default: https://demo.app-ray.co
                                                                                                                                                                                                                                                                                                                                      • outputFilePath : String
                                                                                                                                                                                                                                                                                                                                        Name of the binary file (apk, ipa) to be scanned relative to the workspace. You can use Jenkins variables to specify the filename.
                                                                                                                                                                                                                                                                                                                                      • waitTimeout : int
                                                                                                                                                                                                                                                                                                                                        Timeout of waiting for ending of a scan. (For big application sometimes it take more than 30 minute!)
                                                                                                                                                                                                                                                                                                                                      • riskScoreThreshold : int
                                                                                                                                                                                                                                                                                                                                        The minimum risk score to check the apk validity. It is the output of then scan. You can check the scores on the app-ray instance.
                                                                                                                                                                                                                                                                                                                                      • credentialsId : String
                                                                                                                                                                                                                                                                                                                                        Use email address as a username and please provide a password. The user must have full-access access right in App-Ray in order to be able to submit applications for scanning.
                                                                                                                                                                                                                                                                                                                                    • appscan
                                                                                                                                                                                                                                                                                                                                      • scanner
                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                        • dynamic_analyzer
                                                                                                                                                                                                                                                                                                                                          • target : String
                                                                                                                                                                                                                                                                                                                                          • hasOptions : boolean
                                                                                                                                                                                                                                                                                                                                          • extraField : String (optional)
                                                                                                                                                                                                                                                                                                                                          • loginPassword : String (optional)
                                                                                                                                                                                                                                                                                                                                          • loginType : String (optional)
                                                                                                                                                                                                                                                                                                                                          • loginUser : String (optional)
                                                                                                                                                                                                                                                                                                                                          • optimization : String (optional)
                                                                                                                                                                                                                                                                                                                                          • presenceId : String (optional)
                                                                                                                                                                                                                                                                                                                                          • scanFile : String (optional)
                                                                                                                                                                                                                                                                                                                                          • scanType : String (optional)
                                                                                                                                                                                                                                                                                                                                          • trafficFile : String (optional)
                                                                                                                                                                                                                                                                                                                                        • static_analyzer
                                                                                                                                                                                                                                                                                                                                          • target : String
                                                                                                                                                                                                                                                                                                                                          • hasOptions : boolean
                                                                                                                                                                                                                                                                                                                                          • openSourceOnly : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      • name : String
                                                                                                                                                                                                                                                                                                                                      • type : String
                                                                                                                                                                                                                                                                                                                                      • application : String
                                                                                                                                                                                                                                                                                                                                      • credentials : String
                                                                                                                                                                                                                                                                                                                                      • email : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      • failBuild : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      • failBuildNonCompliance : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      • failureConditions (optional)
                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                        • failureType : String
                                                                                                                                                                                                                                                                                                                                        • threshold : int
                                                                                                                                                                                                                                                                                                                                      • intervention : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      • target : String (optional)
                                                                                                                                                                                                                                                                                                                                      • wait : boolean (optional)
                                                                                                                                                                                                                                                                                                                                    • appscanenterprise
                                                                                                                                                                                                                                                                                                                                      • credentials : String
                                                                                                                                                                                                                                                                                                                                      • folder : String
                                                                                                                                                                                                                                                                                                                                      • testPolicy : String
                                                                                                                                                                                                                                                                                                                                      • template : String
                                                                                                                                                                                                                                                                                                                                      • jobName : String
                                                                                                                                                                                                                                                                                                                                      • accessId : String (optional)
                                                                                                                                                                                                                                                                                                                                      • agent : String (optional)
                                                                                                                                                                                                                                                                                                                                      • application : String (optional)
                                                                                                                                                                                                                                                                                                                                      • email : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      • exploreData : String (optional)
                                                                                                                                                                                                                                                                                                                                      • failBuild : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      • failureConditions (optional)
                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                        • failureType : String
                                                                                                                                                                                                                                                                                                                                        • threshold : int
                                                                                                                                                                                                                                                                                                                                      • loginType : String (optional)
                                                                                                                                                                                                                                                                                                                                      • scanType : String (optional)
                                                                                                                                                                                                                                                                                                                                      • secretKey : String (optional)
                                                                                                                                                                                                                                                                                                                                      • target : String (optional)
                                                                                                                                                                                                                                                                                                                                      • testOptimization : String (optional)
                                                                                                                                                                                                                                                                                                                                      • trafficFile : String (optional)
                                                                                                                                                                                                                                                                                                                                      • wait : boolean (optional)
                                                                                                                                                                                                                                                                                                                                    • $class: 'AppScanSourceBuilder'
                                                                                                                                                                                                                                                                                                                                      • disableScan : boolean
                                                                                                                                                                                                                                                                                                                                      • applicationFile : String
                                                                                                                                                                                                                                                                                                                                      • acceptSSL : boolean
                                                                                                                                                                                                                                                                                                                                      • customScanWorkspace : String

                                                                                                                                                                                                                                                                                                                                        This value will be passed to AppScan Source as the scan workspace. AppScan Source assessment and working files will be stored in this directory.

                                                                                                                                                                                                                                                                                                                                        If this field is blank, the default scan directory will be used.

                                                                                                                                                                                                                                                                                                                                        The default directory is this job's build folder, as defined by Jenkins.

                                                                                                                                                                                                                                                                                                                                      • installation : String (optional)
                                                                                                                                                                                                                                                                                                                                    • $class: 'AppScanStandardBuilder'
                                                                                                                                                                                                                                                                                                                                      • startingURL : String
                                                                                                                                                                                                                                                                                                                                        Insert the URL that you want AppScan Standard to start scanning from.

                                                                                                                                                                                                                                                                                                                                        Spiders will find the remaining URLs in the domain to be included for scanning.

                                                                                                                                                                                                                                                                                                                                      • installation : String
                                                                                                                                                                                                                                                                                                                                      • additionalCommands : String (optional)
                                                                                                                                                                                                                                                                                                                                        Provide additional and optional commands to run on AppScan Standard CLI.
                                                                                                                                                                                                                                                                                                                                        AppScanCMD exec|ex|e
                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                Parameters:
                                                                                                                                                                                                                                                                                                                                                [ /dest_scan|/dest|/d  ]
                                                                                                                                                                                                                                                                                                                                                [ /base_scan|/base|/b  ]
                                                                                                                                                                                                                                                                                                                                                [ /old_host|/ohost|/oh  ]
                                                                                                                                                                                                                                                                                                                                                [ /new_host|/nhost|/nh  ]
                                                                                                                                                                                                                                                                                                                                                [ /scan_template|/stemplate|/st  ]
                                                                                                                                                                                                                                                                                                                                                [ /login_file|/lfile|/lf  ]
                                                                                                                                                                                                                                                                                                                                                [ /multi_step_file|/mstepfile|/mf  ]
                                                                                                                                                                                                                                                                                                                                                [ /manual_explore_file|/mexplorefile|/mef  ]
                                                                                                                                                                                                                                                                                                                                                [ /policy_file|/pfile|/pf  ]
                                                                                                                                                                                                                                                                                                                                                [ /additional_domains|/adomains|/ad  ]
                                                                                                                                                                                                                                                                                                                                                [ /report_file|/rf  ]
                                                                                                                                                                                                                                                                                                                                                [ /report_type|/rt  {xml} ]
                                                                                                                                                                                                                                                                                                                                                [ /min_severity|/msev  {informational} ]
                                                                                                                                                                                                                                                                                                                                                [ /test_type|/tt  ]
                                                                                                                                                                                                                                                                                                                                                [ /report_template|/rtemplate|/rtm  {CliDefault} ]
                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                Flags:
                                                                                                                                                                                                                                                                                                                                                [ /verbose|/v {false} ]
                                                                                                                                                                                                                                                                                                                                                [ /scan_log|/sl {false} ]
                                                                                                                                                                                                                                                                                                                                                [ /explore_only|/eo {false} ]
                                                                                                                                                                                                                                                                                                                                                [ /test_only|/to {false} ]
                                                                                                                                                                                                                                                                                                                                                [ /multi_step|/mstep|/ms {false} ]
                                                                                                                                                                                                                                                                                                                                                [ /continue|/c {false} ]
                                                                                                                                                                                                                                                                                                                                                [ /merge_manual_explore_requests|/mmer {false} ]
                                                                                                                                                                                                                                                                                                                                                [ /include_responses|/ir {false} ]
                                                                                                                                                                                                                                                                                                                                                [ /open_proxy|/oprxy|/opr /listening_port|/lport|/lp  ]
                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                Creates new scan with base_scan's configuration
                                                                                                                                                                                                                                                                                                                                            saving dest_scan and creating report, if configured.
                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                        AppScanCMD report|rep|r
                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                Parametrs:
                                                                                                                                                                                                                                                                                                                                                /base_scan|/base|/b
                                                                                                                                                                                                                                                                                                                                                /report_file|/rf
                                                                                                                                                                                                                                                                                                                                                /report_type|/rt
                                                                                                                                                                                                                                                                                                                                                [ /min_severity|/msev  {informational} ]
                                                                                                                                                                                                                                                                                                                                                [ /test_type|/tt  ]
                                                                                                                                                                                                                                                                                                                                                [ /report_template|/rtemplate|/rtm  {CliDefault} ]
                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                Flags:
                                                                                                                                                                                                                                                                                                                                                [ /verbose|/v {false} ]
                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                Creates a report for base_scan.
                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                        AppScanCMD close_proxy|cprxy|cpr
                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                Closes AppScan proxy if was previously opened.
                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                        More info. at:
                                                                                                                                                                                                                                                                                                                                        (9.0.3.2 User Guide) CLI - Chapter 15 - CLI - Page 315
                                                                                                                                                                                                                                                                                                                                        http://www-01.ibm.com/support/docview.wss?uid=swg27048015#2
                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                      • authScan : boolean (optional)
                                                                                                                                                                                                                                                                                                                                        Checking this option will allow AppScan Stardard to spider and scan a website using authentication, optimizing the results obtained in the report.

                                                                                                                                                                                                                                                                                                                                        If the website contains private information accessed only by logging in this option should be checked and credentials provided to increase dynamic security coverage.

                                                                                                                                                                                                                                                                                                                                      • authScanPw : String (optional)
                                                                                                                                                                                                                                                                                                                                        Provide the password corresponding to the account's user name inserted above.

                                                                                                                                                                                                                                                                                                                                        Providing an account with higher authorization (such as Administrator) will increase the attack surface and therefore the scan coverage.

                                                                                                                                                                                                                                                                                                                                      • authScanRadio : boolean (optional)
                                                                                                                                                                                                                                                                                                                                        Check "Recorded Login Sequence" if you have one for the website, this is, for the majority of the cases, the most reliable option for authenticated scanning.

                                                                                                                                                                                                                                                                                                                                        A login sequence may be recorded using AppScan Standard's GUI by following these steps:

                                                                                                                                                                                                                                                                                                                                        "Scan" > "Scan Configuration" > "Login Management" > "Record" > [ record your login...] > "I am logged in to the site" > "Details" (Tab) > "Export" (small icon on the right side).

                                                                                                                                                                                                                                                                                                                                        Check "Form Based Authentication" if you do not have a recorded login sequence, this option will require an user name and password combination and is not guaranteed to work for all scenarios.

                                                                                                                                                                                                                                                                                                                                      • authScanUser : String (optional)
                                                                                                                                                                                                                                                                                                                                        Provide the user name of an account with access to the private functionalities of the website.

                                                                                                                                                                                                                                                                                                                                        Providing an account with higher authorization (such as Administrator) will increase the attack surface and therefore the scan coverage.

                                                                                                                                                                                                                                                                                                                                      • generateReport : boolean (optional)
                                                                                                                                                                                                                                                                                                                                        Check this option if you want AppScan Standard to generate a report after scannning.

                                                                                                                                                                                                                                                                                                                                        The report is available in HTML and PDF.

                                                                                                                                                                                                                                                                                                                                        The HTML report generated is ready to be integrated with the HTML Publisher Plugin.

                                                                                                                                                                                                                                                                                                                                      • htmlReport : boolean (optional)
                                                                                                                                                                                                                                                                                                                                        This report can be integrated with the HTML Publisher Plugin.
                                                                                                                                                                                                                                                                                                                                      • includeURLS : String (optional)
                                                                                                                                                                                                                                                                                                                                        This is used to include URLs for scanning,

                                                                                                                                                                                                                                                                                                                                        Some URLs might not be found by AppScan Standard's spiders, include them to get the best possible coverage.

                                                                                                                                                                                                                                                                                                                                      • pathRecordedLoginSequence : String (optional)
                                                                                                                                                                                                                                                                                                                                        Provide the full path to the recorded login sequence file (.login). More info. at: (9.0.3.2 User Guide) Login Management view - Chapter 4 - Configuring - Page 45 http://www-01.ibm.com/support/docview.wss?uid=swg27048015#2
                                                                                                                                                                                                                                                                                                                                      • pdfReport : boolean (optional)
                                                                                                                                                                                                                                                                                                                                        A PDF report is generated.
                                                                                                                                                                                                                                                                                                                                      • policyFile : String (optional)
                                                                                                                                                                                                                                                                                                                                        Provide the Path to a Test Policy File (.policy) to determine which type of flaws to scan for.

                                                                                                                                                                                                                                                                                                                                        A Test Policy File can be created following these steps:

                                                                                                                                                                                                                                                                                                                                        "Scan" > "Scan Configuration" > "Test Policy" > "Export".

                                                                                                                                                                                                                                                                                                                                      • reportName : String (optional)
                                                                                                                                                                                                                                                                                                                                        Provide the name to save the report with.

                                                                                                                                                                                                                                                                                                                                        To configure HTML Publisher Plugin properly, the names in the configuration must match.

                                                                                                                                                                                                                                                                                                                                      • verbose : boolean (optional)
                                                                                                                                                                                                                                                                                                                                        Selecting this option will enable AppScan Standards' verbose, printing the full scan output in Jenkins log.
                                                                                                                                                                                                                                                                                                                                    • xooa
                                                                                                                                                                                                                                                                                                                                      • name : String
                                                                                                                                                                                                                                                                                                                                        Xooa Jenkins
                                                                                                                                                                                                                                                                                                                                      • appId : String
                                                                                                                                                                                                                                                                                                                                    • $class: 'AppUploaderBuilder'
                                                                                                                                                                                                                                                                                                                                      • buildFilePath : String
                                                                                                                                                                                                                                                                                                                                        Please specify the absolute path or relative to the app(.apk or .ipa) file to be uploaded.
                                                                                                                                                                                                                                                                                                                                        The app_url of the uploaded app can be accessed from the environment variable BROWSERSTACK_APP_ID.
                                                                                                                                                                                                                                                                                                                                    • applatix
                                                                                                                                                                                                                                                                                                                                      • axUrl : String
                                                                                                                                                                                                                                                                                                                                        The URL of Applatix system. For example: https://applatix.yourcompany.com
                                                                                                                                                                                                                                                                                                                                      • axUsername : String
                                                                                                                                                                                                                                                                                                                                        Applatix credential: username
                                                                                                                                                                                                                                                                                                                                      • axPassword : String
                                                                                                                                                                                                                                                                                                                                        Applatix credential: password
                                                                                                                                                                                                                                                                                                                                      • axServiceTemplateName : String
                                                                                                                                                                                                                                                                                                                                      • axServiceTemplateRepository : String
                                                                                                                                                                                                                                                                                                                                        The repository where your Service Template is.
                                                                                                                                                                                                                                                                                                                                      • axServiceTemplateBranch : String
                                                                                                                                                                                                                                                                                                                                        The branch where your Service Template is.
                                                                                                                                                                                                                                                                                                                                      • axServiceTemplateParameters
                                                                                                                                                                                                                                                                                                                                        The parameters of your Service Template at Applatix system. It is optional. It is in JSON format, for example: {"service": "service_name", "iterations": 3 }
                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                        • key : String
                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                    • snApplyChanges
                                                                                                                                                                                                                                                                                                                                      • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                        User name and password defined in global credentials (credentials ID is required here) used for the instance (usually where the application will be published).
                                                                                                                                                                                                                                                                                                                                      • apiVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                        Optional. Version of the endpoint to access. For example, v1 or v2. Only specify this value to use an endpoint version other than the latest.
                                                                                                                                                                                                                                                                                                                                      • appScope : String (optional)
                                                                                                                                                                                                                                                                                                                                        Required if application system ID is not specified. The scope name of the application for which to apply the changes, such as x_aah_custom_app. You can locate this value in the scope field in the Custom Application [sys_app] table.
                                                                                                                                                                                                                                                                                                                                      • appSysId : String (optional)
                                                                                                                                                                                                                                                                                                                                        Required if application scope is not specified. The system id of the application for which to apply the changes. You can locate this value in the Sys ID field in the Custom Application [sys_app] table.
                                                                                                                                                                                                                                                                                                                                      • branchName : String (optional)
                                                                                                                                                                                                                                                                                                                                        Name of the branch in the source control system from which to acquire the application.
                                                                                                                                                                                                                                                                                                                                      • url : String (optional)
                                                                                                                                                                                                                                                                                                                                        ServiceNow instance url (usually where the application will be published to).
                                                                                                                                                                                                                                                                                                                                    • $class: 'ApprendaBuilder'
                                                                                                                                                                                                                                                                                                                                      • appAlias : String
                                                                                                                                                                                                                                                                                                                                        The Applicaton Alias to be used.
                                                                                                                                                                                                                                                                                                                                      • appName : String
                                                                                                                                                                                                                                                                                                                                        The Applicaton Name to be used.
                                                                                                                                                                                                                                                                                                                                      • versionAlias : String
                                                                                                                                                                                                                                                                                                                                        The application Version Alias to target.
                                                                                                                                                                                                                                                                                                                                      • stage : String
                                                                                                                                                                                                                                                                                                                                        The desired Apprenda Application lifecycle Stage.
                                                                                                                                                                                                                                                                                                                                      • artifactName : String
                                                                                                                                                                                                                                                                                                                                        The filename of the Apprenda Application Package. For example myapplication.zip.
                                                                                                                                                                                                                                                                                                                                      • credentialsId : String
                                                                                                                                                                                                                                                                                                                                      • prefix : String
                                                                                                                                                                                                                                                                                                                                        The Version Alias prefix to be used. Apprenda will append a number to the prefix to complete the Version Alias.
                                                                                                                                                                                                                                                                                                                                      • advVersionAliasToBeForced : String
                                                                                                                                                                                                                                                                                                                                        The complete Version Alias, including the Version prefix and Version number to be used. For example v23.
                                                                                                                                                                                                                                                                                                                                      • advancedNewVersionOption : String
                                                                                                                                                                                                                                                                                                                                      • customPackageDirectory : String
                                                                                                                                                                                                                                                                                                                                        The full path to the folder that contains the Apprenda Application Package defined in the Artifact Name.
                                                                                                                                                                                                                                                                                                                                      • applicationPackageURL : String
                                                                                                                                                                                                                                                                                                                                        The complete URL to the Apprenda Application Package, starting with http:// or https://.
                                                                                                                                                                                                                                                                                                                                      • archiveUploadMethod : String
                                                                                                                                                                                                                                                                                                                                      • buildWithParameters : boolean
                                                                                                                                                                                                                                                                                                                                        Check this box if you are using a parameterized project and want the Apprenda build step to do the substitution of variables from parameters.
                                                                                                                                                                                                                                                                                                                                    • aqua
                                                                                                                                                                                                                                                                                                                                      • locationType : String
                                                                                                                                                                                                                                                                                                                                      • registry : String
                                                                                                                                                                                                                                                                                                                                        Name of a Docker registry that is defined in the Aqua Management Console. E.g. Docker Hub.
                                                                                                                                                                                                                                                                                                                                      • register : boolean
                                                                                                                                                                                                                                                                                                                                      • localImage : String
                                                                                                                                                                                                                                                                                                                                        Path of local Docker image, including tag. E.g. my_ubuntu:latest
                                                                                                                                                                                                                                                                                                                                      • hostedImage : String
                                                                                                                                                                                                                                                                                                                                        Path of Docker image on registry, including tag. E.g. google/mysql:latest
                                                                                                                                                                                                                                                                                                                                      • onDisallowed : String
                                                                                                                                                                                                                                                                                                                                      • notCompliesCmd : String
                                                                                                                                                                                                                                                                                                                                        A shell command to execute when image does not comply with Aqua security policy
                                                                                                                                                                                                                                                                                                                                      • hideBase : boolean
                                                                                                                                                                                                                                                                                                                                      • showNegligible : boolean
                                                                                                                                                                                                                                                                                                                                      • policies : String
                                                                                                                                                                                                                                                                                                                                        Comma separated names of image assurance policies. Available for only for local images and with scanner cli > v3.2.
                                                                                                                                                                                                                                                                                                                                      • customFlags : String
                                                                                                                                                                                                                                                                                                                                      • localToken : String (optional)
                                                                                                                                                                                                                                                                                                                                        Scanner Token for Aqua API. * This token will override the Global Token/Username-Password. * Scanner token entered here is applied at job level. User can use a different token for different builds.
                                                                                                                                                                                                                                                                                                                                      • tarFilePath : String (optional)
                                                                                                                                                                                                                                                                                                                                      • containerRuntime : String (optional)
                                                                                                                                                                                                                                                                                                                                      • scannerPath : String (optional)
                                                                                                                                                                                                                                                                                                                                    • aquaMicroscanner
                                                                                                                                                                                                                                                                                                                                      • imageName : String
                                                                                                                                                                                                                                                                                                                                      • onDisallowed : String
                                                                                                                                                                                                                                                                                                                                      • notCompliesCmd : String
                                                                                                                                                                                                                                                                                                                                        A shell command to execute when image does not comply with Aqua security policy
                                                                                                                                                                                                                                                                                                                                      • outputFormat : String
                                                                                                                                                                                                                                                                                                                                    • aquaServerlessScanner
                                                                                                                                                                                                                                                                                                                                      • onDisallowed : String
                                                                                                                                                                                                                                                                                                                                      • notCompliesCmd : String
                                                                                                                                                                                                                                                                                                                                      • codeScanPath : String
                                                                                                                                                                                                                                                                                                                                      • customFlags : String
                                                                                                                                                                                                                                                                                                                                    • arachniScanner
                                                                                                                                                                                                                                                                                                                                      • url : String
                                                                                                                                                                                                                                                                                                                                        URL of the system under scan.
                                                                                                                                                                                                                                                                                                                                      • checks : String
                                                                                                                                                                                                                                                                                                                                        Here you can specify a comma separated list with the checks to load. Or leave it blank to load all checks.
                                                                                                                                                                                                                                                                                                                                      • scope
                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                        • pageLimit : int
                                                                                                                                                                                                                                                                                                                                          Set the scope property page_limit. See Arachni Security Scanner Wiki for more information.
                                                                                                                                                                                                                                                                                                                                        • excludePathPattern : String
                                                                                                                                                                                                                                                                                                                                          Set the scope property exclude_path_patterns. See Arachni Security Scanner Wiki for more information.
                                                                                                                                                                                                                                                                                                                                      • userConfig
                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                        • filename : String
                                                                                                                                                                                                                                                                                                                                          Name of the file with your own configuration in json format. Specify an absolute path or a relative to workspace.
                                                                                                                                                                                                                                                                                                                                      • format : String
                                                                                                                                                                                                                                                                                                                                    • $class: 'ArtifactDeployerBuilder'
                                                                                                                                                                                                                                                                                                                                      • includes : String

                                                                                                                                                                                                                                                                                                                                        Can use wildcards like 'module/dist/**/*.zip'. See the @includes of Ant fileset for the exact format.
                                                                                                                                                                                                                                                                                                                                        Artifacts are deployed from the workspace. You can change this basedir by specifying the basedir field under Advanced.

                                                                                                                                                                                                                                                                                                                                      • basedir : String

                                                                                                                                                                                                                                                                                                                                        By default, the basedir is the job workspace.
                                                                                                                                                                                                                                                                                                                                        Give a value to override the default value.

                                                                                                                                                                                                                                                                                                                                        Path relative to workspace is permitted.

                                                                                                                                                                                                                                                                                                                                      • excludes : String

                                                                                                                                                                                                                                                                                                                                        Optionally specify the 'excludes' pattern, such as "foo/bar/**/*". A file that matches this mask will not be deployed even if it matches the mask specified.

                                                                                                                                                                                                                                                                                                                                      • remote : String

                                                                                                                                                                                                                                                                                                                                        Artifacts will be deployed in the specified output directory.
                                                                                                                                                                                                                                                                                                                                        The remote location must be accessible through the build machine (master/slave node).
                                                                                                                                                                                                                                                                                                                                        If you want to have the ability to download deployed artifacts through the Jenkins dashboard, the location must be accessible from the Jenkins master.
                                                                                                                                                                                                                                                                                                                                        Make sure the Jenkins process have the right permissions to write to the remote location.
                                                                                                                                                                                                                                                                                                                                        For example with a shared NFS storage, '/nfs/build/deploy/${BUILD_ID}' can be a valid value on an Unix machine.

                                                                                                                                                                                                                                                                                                                                      • flatten : boolean

                                                                                                                                                                                                                                                                                                                                        Ignore the directory structure of the source files, and deploy all the artifacts into the output directory.

                                                                                                                                                                                                                                                                                                                                      • deleteRemote : boolean

                                                                                                                                                                                                                                                                                                                                        Delete the output directory before deploying artifacts.

                                                                                                                                                                                                                                                                                                                                      • deleteRemoteArtifacts : boolean
                                                                                                                                                                                                                                                                                                                                      • failNoFilesDeploy : boolean
                                                                                                                                                                                                                                                                                                                                    • $class: 'ArtifactPromotionBuilder'
                                                                                                                                                                                                                                                                                                                                      Here you can configure the artifact promotion plugin for single artifacts. In the first section (Artifact Information) you enter the coordinates of your artifact.
                                                                                                                                                                                                                                                                                                                                      In the Staging Repository Information section you tell there your source repository is, e.g. http://192.168.56.24/nexus/content/repositories/staging/.
                                                                                                                                                                                                                                                                                                                                      In the following section Release Repository Information, you enter the information about the target repository, e.g. http://192.168.56.24/nexus/content/repositories/releases/. In both sections, you can add user credentials. If you do, the connection to the repository servers will be done using these credentials. If you don't suppot credentials, the access will be done without any authentication.
                                                                                                                                                                                                                                                                                                                                      Both repositorys should be release repositories, not snapshot repos! The password(s) will be saved currently using the standard Jenkins functionality to save those. It's planned to use in the future the credentials plugin.
                                                                                                                                                                                                                                                                                                                                      • groupId : String
                                                                                                                                                                                                                                                                                                                                      • artifactId : String
                                                                                                                                                                                                                                                                                                                                      • classifier : String
                                                                                                                                                                                                                                                                                                                                      • version : String
                                                                                                                                                                                                                                                                                                                                      • extension : String
                                                                                                                                                                                                                                                                                                                                      • stagingRepository : String
                                                                                                                                                                                                                                                                                                                                      • stagingUser : String
                                                                                                                                                                                                                                                                                                                                      • stagingPW : String
                                                                                                                                                                                                                                                                                                                                      • releaseUser : String
                                                                                                                                                                                                                                                                                                                                      • releasePW : String
                                                                                                                                                                                                                                                                                                                                      • releaseRepository : String
                                                                                                                                                                                                                                                                                                                                      • promoterClass : String
                                                                                                                                                                                                                                                                                                                                      • debug : boolean
                                                                                                                                                                                                                                                                                                                                      • skipDeletion : boolean

                                                                                                                                                                                                                                                                                                                                        'Skip deletion' option preserves the files in the staging repository.

                                                                                                                                                                                                                                                                                                                                        Untick 'Skip deletion' only after you've promoted all the relevant files in previous steps.

                                                                                                                                                                                                                                                                                                                                    • artifactResolver
                                                                                                                                                                                                                                                                                                                                      Resolves artifacts against one or more remote maven repositories.
                                                                                                                                                                                                                                                                                                                                      • artifacts
                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                        • groupId : String
                                                                                                                                                                                                                                                                                                                                        • artifactId : String
                                                                                                                                                                                                                                                                                                                                        • version : String
                                                                                                                                                                                                                                                                                                                                        • classifier : String (optional)
                                                                                                                                                                                                                                                                                                                                        • deployToLocal : boolean (optional)
                                                                                                                                                                                                                                                                                                                                        • deployToRemote : boolean (optional)
                                                                                                                                                                                                                                                                                                                                        • extension : String (optional)
                                                                                                                                                                                                                                                                                                                                        • failOnError : boolean (optional)
                                                                                                                                                                                                                                                                                                                                        • pomFile : String (optional)
                                                                                                                                                                                                                                                                                                                                        • targetFileName : String (optional)
                                                                                                                                                                                                                                                                                                                                      • enableRepositoryLogging : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      • enableTransferLogging : boolean (optional)
                                                                                                                                                                                                                                                                                                                                      • repositoryId : String (optional)
                                                                                                                                                                                                                                                                                                                                      • targetDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                    • artifactVersion
                                                                                                                                                                                                                                                                                                                                      • name : String (optional)
                                                                                                                                                                                                                                                                                                                                      • description : String (optional)
                                                                                                                                                                                                                                                                                                                                      • type : String (optional)
                                                                                                                                                                                                                                                                                                                                      • groupId : String (optional)
                                                                                                                                                                                                                                                                                                                                      • artifactId : String (optional)
                                                                                                                                                                                                                                                                                                                                      • stage : String (optional)
                                                                                                                                                                                                                                                                                                                                      • flow : String (optional)
                                                                                                                                                                                                                                                                                                                                      • stageDescription : String (optional)
                                                                                                                                                                                                                                                                                                                                      • version : String (optional)
                                                                                                                                                                                                                                                                                                                                    • artifactVersion
                                                                                                                                                                                                                                                                                                                                      • variableName : String
                                                                                                                                                                                                                                                                                                                                      • name : String (optional)
                                                                                                                                                                                                                                                                                                                                      • stage : String (optional)
                                                                                                                                                                                                                                                                                                                                      • version : String (optional)
                                                                                                                                                                                                                                                                                                                                    • assertthatBddFeatures
                                                                                                                                                                                                                                                                                                                                      • projectId : String
                                                                                                                                                                                                                                                                                                                                        Jira project id.
                                                                                                                                                                                                                                                                                                                                      • credentialsId : String
                                                                                                                                                                                                                                                                                                                                      • outputFolder : String

                                                                                                                                                                                                                                                                                                                                        Output folder for feature files withing workspace. Default ./features/.
                                                                                                                                                                                                                                                                                                                                        By default features are downloaded to the root of the workspace.
                                                                                                                                                                                                                                                                                                                                      • jql : String
                                                                                                                                                                                                                                                                                                                                      • tags : String
                                                                                                                                                                                                                                                                                                                                      • mode : String
                                                                                                                                                                                                                                                                                                                                      • proxyURI : String
                                                                                                                                                                                                                                                                                                                                      • proxyUsername : String
                                                                                                                                                                                                                                                                                                                                      • proxyPassword : String
                                                                                                                                                                                                                                                                                                                                      • jiraServerUrl : String
                                                                                                                                                                                                                                                                                                                                        Jira Server URL. Populate only if using Jira Server version (e.g. https://mycompanyjira.com). Leave blank for cloud.
                                                                                                                                                                                                                                                                                                                                    • $class: 'AssetBuilder'
                                                                                                                                                                                                                                                                                                                                      • name : String
                                                                                                                                                                                                                                                                                                                                      • description : String
                                                                                                                                                                                                                                                                                                                                      • version : String
                                                                                                                                                                                                                                                                                                                                      • vendor : String
                                                                                                                                                                                                                                                                                                                                      • platform : String
                                                                                                                                                                                                                                                                                                                                      • architecture : String
                                                                                                                                                                                                                                                                                                                                      • bits : String
                                                                                                                                                                                                                                                                                                                                      • cpu : int
                                                                                                                                                                                                                                                                                                                                      • memory : int
                                                                                                                                                                                                                                                                                                                                      • storage : int
                                                                                                                                                                                                                                                                                                                                      • installationScriptFilePath : String
                                                                                                                                                                                                                                                                                                                                      • mediaFilePaths
                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                        • path : String
                                                                                                                                                                                                                                                                                                                                      • licenseFilePath : String
                                                                                                                                                                                                                                                                                                                                      • documentationFilePath : String
                                                                                                                                                                                                                                                                                                                                    • $class: 'AssociateItemToRelease'
                                                                                                                                                                                                                                                                                                                                      • releasePrefix : String
                                                                                                                                                                                                                                                                                                                                        Enter the release details. Example: P2#R10
                                                                                                                                                                                                                                                                                                                                      • itemPrefix : String
                                                                                                                                                                                                                                                                                                                                        Enter the prefix of your item here. Example: P1#I10 (P1 - Project number, I10 - Item number), P#I11, P#I12, P2#I13
                                                                                                                                                                                                                                                                                                                                    • associateTag
                                                                                                                                                                                                                                                                                                                                      • nexusInstanceId : String
                                                                                                                                                                                                                                                                                                                                      • tagName : String
                                                                                                                                                                                                                                                                                                                                        The tag which will be applied to components matching the specified search criteria
                                                                                                                                                                                                                                                                                                                                      • search
                                                                                                                                                                                                                                                                                                                                        The search criteria used to locate components on the target Nexus Repository Manager server. For more details, please see Search API
                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                        • key : String
                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                    • $class: 'AstreeBuilder'
                                                                                                                                                                                                                                                                                                                                      • dax_file : String
                                                                                                                                                                                                                                                                                                                                        Absolute path to the DAX file containing the analysis specification and configuration.
                                                                                                                                                                                                                                                                                                                                        Note: In this setting, environment variables can be expanded. Expansion will affect all occurrences of the pattern ${name} where name is a valid environment variable name consisting solely of underscores, digits, and alphabetics from the portable character set and where the first character is not a digit.
                                                                                                                                                                                                                                                                                                                                        Paths and environment variables are evaluated on the machine running Jenkins.
                                                                                                                                                                                                                                                                                                                                      • analysis_id : String
                                                                                                                                                                                                                                                                                                                                        ID of an existing, preconfigured analysis on the Astrée server that serves as a revisioning base for the analyses of the current Jenkins project. The analysis, as configured via the supported DAX file, of a build is imported as a new revision into the project with this ID on the server, if such a project exists. The new revision will become a child revision of the last existing revision. If no project with this ID exists on the server, the analysis will become the first revision of a new project with the specified ID.
                                                                                                                                                                                                                                                                                                                                        Note: In this setting, environment variables can be expanded. Expansion will affect all occurrences of the pattern ${name} where name is a valid environment variable name consisting solely of underscores, digits, and alphabetics from the portable character set and where the first character is not a digit.
                                                                                                                                                                                                                                                                                                                                      • output_dir : String
                                                                                                                                                                                                                                                                                                                                        Absolute path to the folder into which the Summary Reports are to be generated. If left empty, reports will be generated into the project's Workspace directory and will be accessible from the Jenkins web interface.
                                                                                                                                                                                                                                                                                                                                        Note: In this setting, environment variables can be expanded. Expansion will affect all occurrences of the pattern ${name} where name is a valid environment variable name consisting solely of underscores, digits, and alphabetics from the portable character set and where the first character is not a digit.
                                                                                                                                                                                                                                                                                                                                      • skip_analysis : boolean
                                                                                                                                                                                                                                                                                                                                        This switch can be used to deactivate the Astrée analysis build step. This switch provides a more convenient method to temporarily deactivate analysis runs than removing the entire build step and reconfiguring the Astrée analysis run from scratch when later adding the build step again.
                                                                                                                                                                                                                                                                                                                                      • genXMLOverview : boolean
                                                                                                                                                                                                                                                                                                                                      • genXMLCoverage : boolean
                                                                                                                                                                                                                                                                                                                                      • genXMLAlarmsByOccurence : boolean
                                                                                                                                                                                                                                                                                                                                      • genXMLAlarmsByCategory : boolean
                                                                                                                                                                                                                                                                                                                                      • genXMLAlarmsByFile : boolean
                                                                                                                                                                                                                                                                                                                                      • genXMLRulechecks : boolean
                                                                                                                                                                                                                                                                                                                                      • dropAnalysis : boolean
                                                                                                                                                                                                                                                                                                                                        When this option is activated, the analysis is not stored on the Astrée server, instead it is automatically deleted after the analysis run of the build step.
                                                                                                                                                                                                                                                                                                                                        This option is very helpful if the analysis run is only specified by a DAX file and it is not intended to archive each analysis run on the server.
                                                                                                                                                                                                                                                                                                                                        Please be aware that using this option in an analysis run only specified by an analysis ID will result in deleting the analysis with that ID on the Astrée server.
                                                                                                                                                                                                                                                                                                                                        This option corresponds to adding a --drop to a command line call to Astrée.
                                                                                                                                                                                                                                                                                                                                      • genPreprocessOutput : boolean
                                                                                                                                                                                                                                                                                                                                      • failonswitch
                                                                                                                                                                                                                                                                                                                                        This option allow Astrée to fail a build depeneding on the types of detected code defects. The following settings are available:
                                                                                                                                                                                                                                                                                                                                        • Only Errors
                                                                                                                                                                                                                                                                                                                                          ... lets Astrée fail a build if an Error (Definite Type A Alarm) is reported.
                                                                                                                                                                                                                                                                                                                                          This is the preferred setting for most use cases. A build is failed if Astrée can formally show the presence of a severe code defect in a (analysis) context.
                                                                                                                                                                                                                                                                                                                                        • Errors and Alarms
                                                                                                                                                                                                                                                                                                                                          ... lets Astrée fail a build if an Error or Alarm (Definite Type A Alarm or Potential Alarm of Type B or Type C) is reported.
                                                                                                                                                                                                                                                                                                                                          This is the preferred setting in case the absence of runtime errors in an application is to be formally shown. A build is failed if Astrée reports potential runtime errors.
                                                                                                                                                                                                                                                                                                                                        • Errors, Alarms, and Data-Flow Anomalies
                                                                                                                                                                                                                                                                                                                                          ... lets Astrée fail a build if and only if any type of alarm (definite/potential Type A, B, C or D) is reported.
                                                                                                                                                                                                                                                                                                                                          This setting fails builds on any reported potential code defect or anomaly.
                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                        • failon : String
                                                                                                                                                                                                                                                                                                                                    • audit
                                                                                                                                                                                                                                                                                                                                      • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                      • minScore : int (optional)
                                                                                                                                                                                                                                                                                                                                      • platformUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                      • branchName : String (optional)
                                                                                                                                                                                                                                                                                                                                      • defaultCollectionName : String (optional)
                                                                                                                                                                                                                                                                                                                                      • logLevel : String (optional)
                                                                                                                                                                                                                                                                                                                                      • prId : String (optional)
                                                                                                                                                                                                                                                                                                                                      • prTargetBranch : String (optional)
                                                                                                                                                                                                                                                                                                                                      • repositoryName : String (optional)
                                                                                                                                                                                                                                                                                                                                      • rootDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                      • shareEveryone : String (optional)
                                                                                                                                                                                                                                                                                                                                      • tagName : String (optional)
                                                                                                                                                                                                                                                                                                                                    • $class: 'AutEnvironmentBuilder'
                                                                                                                                                                                                                                                                                                                                      • autEnvironmentModel
                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                        • almServerName : String
                                                                                                                                                                                                                                                                                                                                        • almUserName : String
                                                                                                                                                                                                                                                                                                                                        • almPassword : String
                                                                                                                                                                                                                                                                                                                                        • almDomain : String
                                                                                                                                                                                                                                                                                                                                        • almProject : String
                                                                                                                                                                                                                                                                                                                                        • clientType : String
                                                                                                                                                                                                                                                                                                                                          Client type should be provided if your server is ALM version 12.60 or above.
                                                                                                                                                                                                                                                                                                                                        • autEnvironmentId : String
                                                                                                                                                                                                                                                                                                                                          Assign ID of an AUT Environment that exists in the ALM project you selected.
                                                                                                                                                                                                                                                                                                                                        • useExistingAutEnvConf : boolean
                                                                                                                                                                                                                                                                                                                                        • existingAutEnvConfId : String
                                                                                                                                                                                                                                                                                                                                        • createNewAutEnvConf : boolean
                                                                                                                                                                                                                                                                                                                                        • newAutEnvConfName : String
                                                                                                                                                                                                                                                                                                                                        • autEnvironmentParameters
                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                          • name : String
                                                                                                                                                                                                                                                                                                                                            The name must be set in the same hierarchical structure as it defined in ALM ( 'Parameters' tab of the AUT Environment)

                                                                                                                                                                                                                                                                                                                                            For example: 'Parameters/DB_Setting/Oracle/username'
                                                                                                                                                                                                                                                                                                                                          • value : String
                                                                                                                                                                                                                                                                                                                                            If you are using a 'From JSON' type, specify here the path for the element you would like to get.

                                                                                                                                                                                                                                                                                                                                            Make sure you are using JsonPath style for defining it.
                                                                                                                                                                                                                                                                                                                                          • paramType : String
                                                                                                                                                                                                                                                                                                                                            Manual - the value you'll assign for 'Parameter value' field will be used as is.

                                                                                                                                                                                                                                                                                                                                            Environmnet - the value you'll assign for 'Parameter value' will be looked for in the environment parameters and the resolved value will be used. If you named your parameter 'my_parameter' put here 'my_parameter' (exactly the same value).

                                                                                                                                                                                                                                                                                                                                            From JSON - the value you'll assign for 'Parameter value' will be looked for in the JSON file you specified for the 'Path to JSON file' entry.
                                                                                                                                                                                                                                                                                                                                          • shouldGetOnlyFirstValueFromJson : boolean
                                                                                                                                                                                                                                                                                                                                        • pathToJsonFile : String
                                                                                                                                                                                                                                                                                                                                          A path to the JSON file that will be loaded in order to assign values to all the AUT Environment Parameters of 'From JSON' type.
                                                                                                                                                                                                                                                                                                                                        • outputParameter : String
                                                                                                                                                                                                                                                                                                                                          The name of the build environment parameter that will get the ID of the updated/created AUT Environment Configuration. It then can be used as a parameter for following build steps.

                                                                                                                                                                                                                                                                                                                                          The parameter must be a String Parameter.

                                                                                                                                                                                                                                                                                                                                          If you named your parameter 'output_parameter' put here 'output_parameter' (exactly the same value).
                                                                                                                                                                                                                                                                                                                                    • autifyWeb
                                                                                                                                                                                                                                                                                                                                      • credentialsId : String
                                                                                                                                                                                                                                                                                                                                        Select the credentials of "Secret Text" storing the Personal Access Token of Autify for Web.
                                                                                                                                                                                                                                                                                                                                        See Autify's document to understand how to generate the Personal Access Token.
                                                                                                                                                                                                                                                                                                                                      • autifyUrl : String
                                                                                                                                                                                                                                                                                                                                        The URL of your test plan or test scenario you want to run on Autify for Web e.g. https://app.autify.com/projects/<ID>/(scenarios|test_plans)/<ID>
                                                                                                                                                                                                                                                                                                                                      • browser : String (optional)
                                                                                                                                                                                                                                                                                                                                      • device : String (optional)
                                                                                                                                                                                                                                                                                                                                      • deviceType : String (optional)
                                                                                                                                                                                                                                                                                                                                      • os : String (optional)
                                                                                                                                                                                                                                                                                                                                      • osVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                      • testExecutionName : String (optional)
                                                                                                                                                                                                                                                                                                                                      • timeout : String (optional)
                                                                                                                                                                                                                                                                                                                                        Only meaningful if you check "Wait".
                                                                                                                                                                                                                                                                                                                                        Timeout seconds when waiting the test finishes. If exceeds, the step will fail.
                                                                                                                                                                                                                                                                                                                                      • urlReplacements (optional)
                                                                                                                                                                                                                                                                                                                                        List of a pair of URLs to replace the URL when Autify test accesses. This is useful when you want to run the same Autify test in a different stage e.g. running a test recorded in production against staging.
                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                        • patternUrl : String
                                                                                                                                                                                                                                                                                                                                        • replacementUrl : String
                                                                                                                                                                                                                                                                                                                                      • wait : boolean (optional)
                                                                                                                                                                                                                                                                                                                                        If checked, the step will wait until the Autify's test plan or scenario finishes.
                                                                                                                                                                                                                                                                                                                                    • $class: 'Autogen'
                                                                                                                                                                                                                                                                                                                                      • element : String

                                                                                                                                                                                                                                                                                                                                        Specify the name of the element in your Endevor® sandbox that you want to include in the autogeneration process, for example, RUNCOB01. The maximum length is 8 characters.

                                                                                                                                                                                                                                                                                                                                        You can specify several specific comma-separated elements within the sandbox, for example, RUNCOB01, RUNCOB02.

                                                                                                                                                                                                                                                                                                                                        You can use wildcards % and * to define the name patterns for the element names.
                                                                                                                                                                                                                                                                                                                                        Examples:
                                                                                                                                                                                                                                                                                                                                        Specify * to include all elements from the sandbox in the autonegeration process.
                                                                                                                                                                                                                                                                                                                                        Specify RUNCOB* to include all element names that start with "RUNCOB".
                                                                                                                                                                                                                                                                                                                                        Specify %%%COB* to include elements that contain the substring COB starting after position three.

                                                                                                                                                                                                                                                                                                                                      • environment : String

                                                                                                                                                                                                                                                                                                                                        Provide the environment for the Endevor® sandbox that you want to include in the autogeneration process, for example, DEV.

                                                                                                                                                                                                                                                                                                                                      • system : String

                                                                                                                                                                                                                                                                                                                                        Provide the system name for the environment in your Endevor® sandbox that you want to include in the autogeneration process, for example, APCTTC0.

                                                                                                                                                                                                                                                                                                                                      • subsystem : String

                                                                                                                                                                                                                                                                                                                                        Provide the subsystem name for the environment in your Endevor® sandbox that you want to include in the autogeneration process, for example, TESTCICD.

                                                                                                                                                                                                                                                                                                                                      • stage : String

                                                                                                                                                                                                                                                                                                                                        Specify the environment stage in your Endevor® that you want to include in the autogeneration process, for example, 1.

                                                                                                                                                                                                                                                                                                                                      • instance : String

                                                                                                                                                                                                                                                                                                                                        Specify the instance name of the environment that is associated with Endevor® Web services, for example, WEBSMFNE.

                                                                                                                                                                                                                                                                                                                                      • signout : boolean

                                                                                                                                                                                                                                                                                                                                        Select this option to work with elements in Endevor® that might be currently worked on by another user.

                                                                                                                                                                                                                                                                                                                                        Select the Override signout option only if you have the permission to override the signout of another user.

                                                                                                                                                                                                                                                                                                                                    • $class: 'AwsBatchBuilder'
                                                                                                                                                                                                                                                                                                                                      • jobname : String
                                                                                                                                                                                                                                                                                                                                      • jobdefinition : String
                                                                                                                                                                                                                                                                                                                                      • command : String
                                                                                                                                                                                                                                                                                                                                      • jobqueue : String
                                                                                                                                                                                                                                                                                                                                      • vcpu : String
                                                                                                                                                                                                                                                                                                                                      • memory : String
                                                                                                                                                                                                                                                                                                                                      • retries : String
                                                                                                                                                                                                                                                                                                                                    • azureCLI
                                                                                                                                                                                                                                                                                                                                      • principalCredentialId : String
                                                                                                                                                                                                                                                                                                                                        The Service Principal credentials required to connect to your Azure account.
                                                                                                                                                                                                                                                                                                                                        More information can be found here: https://github.com/Azure/azure-devops-utils#user-content-create-service-principal
                                                                                                                                                                                                                                                                                                                                        If you want to add an Azure credential click "Add" and select "Microsoft Azure Service Principal" from the Kind drop-down.
                                                                                                                                                                                                                                                                                                                                        If you want to remove existing Azure credentials you must go to the Credentials Dashboard.
                                                                                                                                                                                                                                                                                                                                      • commands
                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                        • script : String
                                                                                                                                                                                                                                                                                                                                        • exportVariablesString : String
                                                                                                                                                                                                                                                                                                                                          Export the output of the command to environment variables
                                                                                                                                                                                                                                                                                                                                          The format: /"variable from JSON" | "desired environment variable name"
                                                                                                                                                                                                                                                                                                                                          For example: Output: { "id": "/subscriptions/some-guid/resourceGroups/test", "location": "northeurope", "managedBy": null, "name": "test", "properties": { "provisioningState": "Succeeded" }, "tags": null } Environment Variable String: /location|LOCATION , /name|NAME
                                                                                                                                                                                                                                                                                                                                    • azureDownload
                                                                                                                                                                                                                                                                                                                                      • storageCredentialId : String
                                                                                                                                                                                                                                                                                                                                      • downloadType : String
                                                                                                                                                                                                                                                                                                                                      • buildSelector (optional)
                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                        • downstream
                                                                                                                                                                                                                                                                                                                                          • upstreamProjectName : String

                                                                                                                                                                                                                                                                                                                                            Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.

                                                                                                                                                                                                                                                                                                                                            Downstream builds are found using fingerprints of files. That is, a build that is triggered from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.

                                                                                                                                                                                                                                                                                                                                            Note: "Downstream build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).

                                                                                                                                                                                                                                                                                                                                            AbstractProject based projects:
                                                                                                                                                                                                                                                                                                                                            Freestyle projects
                                                                                                                                                                                                                                                                                                                                            Multi-configuration projects
                                                                                                                                                                                                                                                                                                                                            Maven projects
                                                                                                                                                                                                                                                                                                                                            Non AbstractProject based projects:
                                                                                                                                                                                                                                                                                                                                            Pipeline jobs (aka. Workflow jobs)

                                                                                                                                                                                                                                                                                                                                          • upstreamBuildNumber : String
                                                                                                                                                                                                                                                                                                                                            The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
                                                                                                                                                                                                                                                                                                                                        • lastWithArtifacts
                                                                                                                                                                                                                                                                                                                                          • lastCompleted
                                                                                                                                                                                                                                                                                                                                            • $class: 'MultiJobBuildSelector'
                                                                                                                                                                                                                                                                                                                                              • buildParameter
                                                                                                                                                                                                                                                                                                                                                • parameterName : String
                                                                                                                                                                                                                                                                                                                                                  Name of the "build selector" parameter. A parameter with this name should be added in the build parameters section above. There is a special parameter type for choosing the build selector.

                                                                                                                                                                                                                                                                                                                                                  You can pass not only the parameter name, but also the parameter value itself. This is useful especially used with workflow-plugin.

                                                                                                                                                                                                                                                                                                                                              • permalink
                                                                                                                                                                                                                                                                                                                                                • id : String
                                                                                                                                                                                                                                                                                                                                              • $class: 'PromotedBuildSelector'
                                                                                                                                                                                                                                                                                                                                                • level : int
                                                                                                                                                                                                                                                                                                                                              • latestSavedBuild
                                                                                                                                                                                                                                                                                                                                                • specific
                                                                                                                                                                                                                                                                                                                                                  • buildNumber : String
                                                                                                                                                                                                                                                                                                                                                    While this selector is for build numbers (e.g. "22" for build #22), you can also resolve build parameters or environment variables (e.g. "${PARAM}"). The display name of a build and permalinks (e.g. "lastSuccessfulBuild", "lastBuild"...) can be used as well.
                                                                                                                                                                                                                                                                                                                                                • lastSuccessful
                                                                                                                                                                                                                                                                                                                                                  • stable : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                • upstream
                                                                                                                                                                                                                                                                                                                                                  • allowUpstreamDependencies : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                  • fallbackToLastSuccessful : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                  • upstreamFilterStrategy (optional)
                                                                                                                                                                                                                                                                                                                                                    Jenkins launches only one build when multiple upstreams triggered the same project at the same time. This field specifies from which upstream build to copy artifacts in those cases. "Use the oldest" copies artifacts from the upstream build with the smallest build number (that is, oldest). "Use the newest" copies artifacts from the upstream build with the largest build number (that is, newest). The default value is "Use global setting", which behaves as configured in "Manage Jenkins" > "Configure System".
                                                                                                                                                                                                                                                                                                                                                    • Values: UseGlobalSetting, UseOldest, UseNewest
                                                                                                                                                                                                                                                                                                                                                • workspace
                                                                                                                                                                                                                                                                                                                                                • containerName : String (optional)
                                                                                                                                                                                                                                                                                                                                                  Enter a storage container name.
                                                                                                                                                                                                                                                                                                                                                  Environment variables can also be referenced.
                                                                                                                                                                                                                                                                                                                                                  For example: ${JOB_NAME}
                                                                                                                                                                                                                                                                                                                                                • deleteFromAzureAfterDownload : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                  If checked, the file copy on Azure will be removed after it's downloaded to local.
                                                                                                                                                                                                                                                                                                                                                • downloadDirLoc : String (optional)
                                                                                                                                                                                                                                                                                                                                                  Enter a download path. If not specified, the files will be downloaded into the job's workspace.
                                                                                                                                                                                                                                                                                                                                                  Environment variables can also be referenced, for example: ${JOB_NAME} If "Flatten Directories" is checked, this directory will contain all outputs.
                                                                                                                                                                                                                                                                                                                                                • excludeFilesPattern : String (optional)
                                                                                                                                                                                                                                                                                                                                                  Enter a pattern of blobs to exclude from the download. Ant fileset syntax. Leaving blank will download the entire container. Environment variables can also be referenced.
                                                                                                                                                                                                                                                                                                                                                  For example: ${JOB_NAME}
                                                                                                                                                                                                                                                                                                                                                • fileShare : String (optional)
                                                                                                                                                                                                                                                                                                                                                  Enter a Azure File Storage Share name.
                                                                                                                                                                                                                                                                                                                                                  Environment variables can also be referenced.
                                                                                                                                                                                                                                                                                                                                                  For example: ${JOB_NAME}
                                                                                                                                                                                                                                                                                                                                                • flattenDirectories : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                  If checked, all files specified for download will be flattened to the single download directory. If two files are named the same in different directories, only one will remain.
                                                                                                                                                                                                                                                                                                                                                • includeArchiveZips : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                  The archive zip files generated (archive.zip in the root of the container/virtual path) are typically excluded from download. Check this to enable downloading of the archive zip.
                                                                                                                                                                                                                                                                                                                                                • includeFilesPattern : String (optional)
                                                                                                                                                                                                                                                                                                                                                  Enter a pattern of blobs to download. Ant fileset syntax. Environment variables can also be referenced.
                                                                                                                                                                                                                                                                                                                                                  For example: ${JOB_NAME}
                                                                                                                                                                                                                                                                                                                                                • projectName : String (optional)
                                                                                                                                                                                                                                                                                                                                                  The name of the project to download the managed artifact from.
                                                                                                                                                                                                                                                                                                                                                • verbose : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                  Enabling this will provide more logging on downloading files.

                                                                                                                                                                                                                                                                                                                                              • $class: 'BDSBuilder'
                                                                                                                                                                                                                                                                                                                                                • projectFile : String
                                                                                                                                                                                                                                                                                                                                                • switches : String
                                                                                                                                                                                                                                                                                                                                                • installationName : String
                                                                                                                                                                                                                                                                                                                                              • $class: 'BapFtpBuilder'
                                                                                                                                                                                                                                                                                                                                                Send files over FTP as a build step during the build.
                                                                                                                                                                                                                                                                                                                                                • publishers
                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                  • configName : String

                                                                                                                                                                                                                                                                                                                                                    Select an FTP configuration from the list configured in the global configuration of this Jenkins.

                                                                                                                                                                                                                                                                                                                                                    The configuration defines the connection properties and base directory of the FTP server.

                                                                                                                                                                                                                                                                                                                                                  • verbose : boolean
                                                                                                                                                                                                                                                                                                                                                    Select to enable logging of all commands sent to, and responses received from the FTP server in the Jenkins console.
                                                                                                                                                                                                                                                                                                                                                  • transfers
                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                    • sourceFiles : String

                                                                                                                                                                                                                                                                                                                                                      Files to upload to a server.

                                                                                                                                                                                                                                                                                                                                                      The string is a comma separated list of includes for an Ant fileset eg. '**/*.jar' (see Patterns in the Ant manual).
                                                                                                                                                                                                                                                                                                                                                      The base directory for this fileset is the workspace.

                                                                                                                                                                                                                                                                                                                                                    • excludes : String

                                                                                                                                                                                                                                                                                                                                                      Exclude files from the Transfer set.

                                                                                                                                                                                                                                                                                                                                                      The string is a comma separated list of excludes for an Ant fileset eg. '**/*.log,**/*.tmp,.git/' (see Patterns in the Ant manual)

                                                                                                                                                                                                                                                                                                                                                    • remoteDirectory : String

                                                                                                                                                                                                                                                                                                                                                      Optional destination folder.

                                                                                                                                                                                                                                                                                                                                                      This folder will be below the one in the global configuration, if present.
                                                                                                                                                                                                                                                                                                                                                      The folder will be created if does not exist.

                                                                                                                                                                                                                                                                                                                                                    • removePrefix : String

                                                                                                                                                                                                                                                                                                                                                      First part of the file path that should not be created on the remote server.

                                                                                                                                                                                                                                                                                                                                                      Directory structures are created relative to the base directory, which is usually the workspace.
                                                                                                                                                                                                                                                                                                                                                      You normally do not want the full path to these files to be created on the server.
                                                                                                                                                                                                                                                                                                                                                      For example if Source files were target/deployment/images/**/ then you may want Remove prefix to be target/deployment This would create the images folder under the remote directory, and not target/deployment
                                                                                                                                                                                                                                                                                                                                                      Jenkins environment variables can be used in this path.

                                                                                                                                                                                                                                                                                                                                                      If you use remove prefix, then ALL source file paths MUST start with the prefix.

                                                                                                                                                                                                                                                                                                                                                    • asciiMode : boolean

                                                                                                                                                                                                                                                                                                                                                      Select to enable ASCII mode for the transfer, otherwise binary transfer mode will be used.

                                                                                                                                                                                                                                                                                                                                                      Use with ASCII text files to fix the line terminators when transferring between different operating systems.

                                                                                                                                                                                                                                                                                                                                                    • remoteDirectorySDF : boolean

                                                                                                                                                                                                                                                                                                                                                      Select this to include the timestamp in the remote directory.

                                                                                                                                                                                                                                                                                                                                                      The timestamp is the date of build. If this publisher is being used during a promotion, then the timestamp is that of the build that is being promoted.
                                                                                                                                                                                                                                                                                                                                                      This setting turns the remote directory option into a java SimpleDateFormat.
                                                                                                                                                                                                                                                                                                                                                      The SimpleDateFormat(SDF) uses letters to represent components of the date, like the month, year, or day of the week. Click here for more information about the date patterns.
                                                                                                                                                                                                                                                                                                                                                      As the SDF reserves all of the letters [A-Z][a-z], any that you want to appear literally in the directory that is created will need to be quoted.

                                                                                                                                                                                                                                                                                                                                                      Some examples follow - all examples are based on a build with a timestamp of 3:45 pm and 55 seconds on the 7th November 2010.

                                                                                                                                                                                                                                                                                                                                                      Remote directory Directories created
                                                                                                                                                                                                                                                                                                                                                      'qa-approved/'yyyyMMddHHmmss qa-approved/20101107154555
                                                                                                                                                                                                                                                                                                                                                      'builds/'yyyy/MM/dd/'build-${BUILD_NUMBER}' builds/2010/11/07/build-456 (if the build was number 456)
                                                                                                                                                                                                                                                                                                                                                      yyyy_MM/'build'-EEE-d-HHmmss 2010_11/build-Sun-7-154555
                                                                                                                                                                                                                                                                                                                                                      yyyy-MM-dd_HH-mm-ss 2010-11-07_15-45-55

                                                                                                                                                                                                                                                                                                                                                    • flatten : boolean

                                                                                                                                                                                                                                                                                                                                                      Only create files on the server, don't create directories (except for the remote directory, if present).

                                                                                                                                                                                                                                                                                                                                                      All files that have been selected to transfer must have unique filenames. The publisher will stop and fail as soon as a duplicate filename is found when using the flatten option.

                                                                                                                                                                                                                                                                                                                                                    • cleanRemote : boolean

                                                                                                                                                                                                                                                                                                                                                      Select to delete all files and directories within the remote directory before transferring files.

                                                                                                                                                                                                                                                                                                                                                    • noDefaultExcludes : boolean
                                                                                                                                                                                                                                                                                                                                                    • makeEmptyDirs : boolean

                                                                                                                                                                                                                                                                                                                                                      The default behaviour of this plugin is to match files, and then create any directories required to preserve the paths to the files.
                                                                                                                                                                                                                                                                                                                                                      Selecting this option will create any directories that match the Source files pattern, even if empty.

                                                                                                                                                                                                                                                                                                                                                    • patternSeparator : String

                                                                                                                                                                                                                                                                                                                                                      The regular expression that is used to separate the Source files and Exclude files patterns.

                                                                                                                                                                                                                                                                                                                                                      The Source files and Exclude files both accept multiple patterns that by default are split using

                                                                                                                                                                                                                                                                                                                                                      [, ]+
                                                                                                                                                                                                                                                                                                                                                      which is how Ant, by default, handles multiple patterns in a single string.

                                                                                                                                                                                                                                                                                                                                                      The above expression makes it difficult to reference files or directories that contain spaces. This option allows the expression to be set to something that will preserve the spaces in a pattern eg. a single comma.

                                                                                                                                                                                                                                                                                                                                                  • useWorkspaceInPromotion : boolean

                                                                                                                                                                                                                                                                                                                                                    Set the root directory for the Source files to the workspace.

                                                                                                                                                                                                                                                                                                                                                    By default this plugin uses the artifacts directory (where archived artifacts are stored). This allows the artifacts from the build number that you are promoting to be sent somewhere else.

                                                                                                                                                                                                                                                                                                                                                    If you run tasks that produce files in the workspace during the promotion and you want to publish them, then set this option.

                                                                                                                                                                                                                                                                                                                                                    If you need to send files from both the workspace and the archive directory, then you need to add a second server, even if you want to send the files to the same place. This is due to the fact that the workspace is not necessarily on the same host as the archive directory

                                                                                                                                                                                                                                                                                                                                                  • usePromotionTimestamp : boolean

                                                                                                                                                                                                                                                                                                                                                    Use the build time of the promotion when the remote directory is a date format.

                                                                                                                                                                                                                                                                                                                                                    By default this plugin uses the time of the original build (the one that is being promoted) when formatting the remote directory. Setting this option will mean that if you use the remote directory is a date format option, it will use the time that the promotion process runs, instead of the original build.

                                                                                                                                                                                                                                                                                                                                                  • ftpRetry

                                                                                                                                                                                                                                                                                                                                                    If publishing to this server fails, try again.

                                                                                                                                                                                                                                                                                                                                                    Files that were successfully transferred will not be re-sent.
                                                                                                                                                                                                                                                                                                                                                    If the Clean remote option is selected, and succeeds, it will not be attempted again.

                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                    • retries : int
                                                                                                                                                                                                                                                                                                                                                      The number of times to retry this server in the event of failure.
                                                                                                                                                                                                                                                                                                                                                    • retryDelay : long
                                                                                                                                                                                                                                                                                                                                                      The time to wait, in milliseconds, before attempting another transfer.
                                                                                                                                                                                                                                                                                                                                                  • ftpLabel

                                                                                                                                                                                                                                                                                                                                                    Set the label for this Server instance - for use with Parameterized publishing.

                                                                                                                                                                                                                                                                                                                                                    Expand the help for Parameterized publishing for more details.

                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                    • label : String

                                                                                                                                                                                                                                                                                                                                                      Set the label for this Server instance - for use with Parameterized publishing.

                                                                                                                                                                                                                                                                                                                                                      Expand the help for Parameterized publishing for more details.

                                                                                                                                                                                                                                                                                                                                                  • ftpCredentials
                                                                                                                                                                                                                                                                                                                                                    Set the username and password to use with this connection.

                                                                                                                                                                                                                                                                                                                                                    If you want to use different credentials from those configured for this server, or if the credentials have not been specified for this server, then enable this option and set the username and password to use.

                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                    • username : String
                                                                                                                                                                                                                                                                                                                                                    • password : String
                                                                                                                                                                                                                                                                                                                                                • continueOnError : boolean
                                                                                                                                                                                                                                                                                                                                                • failOnError : boolean
                                                                                                                                                                                                                                                                                                                                                • alwaysPublishFromMaster : boolean
                                                                                                                                                                                                                                                                                                                                                • masterNodeName : String
                                                                                                                                                                                                                                                                                                                                                • paramPublish
                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                  • parameterName : String
                                                                                                                                                                                                                                                                                                                                                    The name of the parameter or environment variable that will contain the expression for matching the labels.
                                                                                                                                                                                                                                                                                                                                              • $class: 'BapSshBuilderPlugin'
                                                                                                                                                                                                                                                                                                                                                Send files or execute commands over SSH as a build step during the build.
                                                                                                                                                                                                                                                                                                                                                • publishers
                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                  • configName : String

                                                                                                                                                                                                                                                                                                                                                    Select an SSH configuration from the list configured in the global configuration of this Jenkins.

                                                                                                                                                                                                                                                                                                                                                    The configuration defines the connection properties and base directory of the SSH server.

                                                                                                                                                                                                                                                                                                                                                  • verbose : boolean
                                                                                                                                                                                                                                                                                                                                                    Select to enable an obscene amount of information to the Jenkins console - only really useful to help track down problems.
                                                                                                                                                                                                                                                                                                                                                  • transfers
                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                    • sourceFiles : String

                                                                                                                                                                                                                                                                                                                                                      Files to upload to a server.

                                                                                                                                                                                                                                                                                                                                                      The string is a comma separated list of includes for an Ant fileset eg. '**/*.jar' (see Patterns in the Ant manual).
                                                                                                                                                                                                                                                                                                                                                      The base directory for this fileset is the workspace.

                                                                                                                                                                                                                                                                                                                                                    • excludes : String

                                                                                                                                                                                                                                                                                                                                                      Exclude files from the Transfer set.

                                                                                                                                                                                                                                                                                                                                                      The string is a comma separated list of excludes for an Ant fileset eg. '**/*.log,**/*.tmp,.git/' (see Patterns in the Ant manual)

                                                                                                                                                                                                                                                                                                                                                    • remoteDirectory : String

                                                                                                                                                                                                                                                                                                                                                      Optional destination folder.

                                                                                                                                                                                                                                                                                                                                                      This folder will be below the one in the global configuration, if present.
                                                                                                                                                                                                                                                                                                                                                      The folder will be created if does not exist.

                                                                                                                                                                                                                                                                                                                                                    • removePrefix : String

                                                                                                                                                                                                                                                                                                                                                      First part of the file path that should not be created on the remote server.

                                                                                                                                                                                                                                                                                                                                                      Directory structures are created relative to the base directory, which is usually the workspace.
                                                                                                                                                                                                                                                                                                                                                      You normally do not want the full path to these files to be created on the server.
                                                                                                                                                                                                                                                                                                                                                      For example if Source files were target/deployment/images/**/ then you may want Remove prefix to be target/deployment This would create the images folder under the remote directory, and not target/deployment
                                                                                                                                                                                                                                                                                                                                                      Jenkins environment variables can be used in this path.

                                                                                                                                                                                                                                                                                                                                                      If you use remove prefix, then ALL source file paths MUST start with the prefix.

                                                                                                                                                                                                                                                                                                                                                    • remoteDirectorySDF : boolean

                                                                                                                                                                                                                                                                                                                                                      Select this to include the timestamp in the remote directory.

                                                                                                                                                                                                                                                                                                                                                      The timestamp is the date of build. If this publisher is being used during a promotion, then the timestamp is that of the build that is being promoted.
                                                                                                                                                                                                                                                                                                                                                      This setting turns the remote directory option into a java SimpleDateFormat.
                                                                                                                                                                                                                                                                                                                                                      The SimpleDateFormat(SDF) uses letters to represent components of the date, like the month, year, or day of the week. Click here for more information about the date patterns.
                                                                                                                                                                                                                                                                                                                                                      As the SDF reserves all of the letters [A-Z][a-z], any that you want to appear literally in the directory that is created will need to be quoted.

                                                                                                                                                                                                                                                                                                                                                      Some examples follow - all examples are based on a build with a timestamp of 3:45 pm and 55 seconds on the 7th November 2010.

                                                                                                                                                                                                                                                                                                                                                      Remote directory Directories created
                                                                                                                                                                                                                                                                                                                                                      'qa-approved/'yyyyMMddHHmmss qa-approved/20101107154555
                                                                                                                                                                                                                                                                                                                                                      'builds/'yyyy/MM/dd/'build-${BUILD_NUMBER}' builds/2010/11/07/build-456 (if the build was number 456)
                                                                                                                                                                                                                                                                                                                                                      yyyy_MM/'build'-EEE-d-HHmmss 2010_11/build-Sun-7-154555
                                                                                                                                                                                                                                                                                                                                                      yyyy-MM-dd_HH-mm-ss 2010-11-07_15-45-55

                                                                                                                                                                                                                                                                                                                                                    • flatten : boolean

                                                                                                                                                                                                                                                                                                                                                      Only create files on the server, don't create directories (except for the remote directory, if present).

                                                                                                                                                                                                                                                                                                                                                      All files that have been selected to transfer must have unique filenames. The publisher will stop and fail as soon as a duplicate filename is found when using the flatten option.

                                                                                                                                                                                                                                                                                                                                                    • cleanRemote : boolean
                                                                                                                                                                                                                                                                                                                                                    • noDefaultExcludes : boolean
                                                                                                                                                                                                                                                                                                                                                    • makeEmptyDirs : boolean

                                                                                                                                                                                                                                                                                                                                                      The default behaviour of this plugin is to match files, and then create any directories required to preserve the paths to the files.
                                                                                                                                                                                                                                                                                                                                                      Selecting this option will create any directories that match the Source files pattern, even if empty.

                                                                                                                                                                                                                                                                                                                                                    • patternSeparator : String

                                                                                                                                                                                                                                                                                                                                                      The regular expression that is used to separate the Source files and Exclude files patterns.

                                                                                                                                                                                                                                                                                                                                                      The Source files and Exclude files both accept multiple patterns that by default are split using

                                                                                                                                                                                                                                                                                                                                                      [, ]+
                                                                                                                                                                                                                                                                                                                                                      which is how Ant, by default, handles multiple patterns in a single string.

                                                                                                                                                                                                                                                                                                                                                      The above expression makes it difficult to reference files or directories that contain spaces. This option allows the expression to be set to something that will preserve the spaces in a pattern eg. a single comma.

                                                                                                                                                                                                                                                                                                                                                    • execCommand : String (optional)

                                                                                                                                                                                                                                                                                                                                                      A command to execute on the remote server.

                                                                                                                                                                                                                                                                                                                                                      This command will be executed on the remote server after any files are transferred.
                                                                                                                                                                                                                                                                                                                                                      The SSH Transfer Set must include either a Source Files pattern, an Exec command, or both. If both are present, the files are transferred before the command is executed. If you want to Exec before the files are transferred, use 2 Transfer Sets and move the Exec command before the Transfer set that includes a Source files pattern.

                                                                                                                                                                                                                                                                                                                                                    • execTimeout : int (optional)

                                                                                                                                                                                                                                                                                                                                                      Timeout in milliseconds for the Exec command.

                                                                                                                                                                                                                                                                                                                                                      Set to zero to disable.

                                                                                                                                                                                                                                                                                                                                                    • usePty : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                      Exec the command in a pseudo tty.

                                                                                                                                                                                                                                                                                                                                                      This will enable the execution of sudo commands that require a tty (and possibly help in other scenarios too.)
                                                                                                                                                                                                                                                                                                                                                      From the sudoers(5) man page:

                                                                                                                                                                                                                                                                                                                                                      requiretty      If set, sudo will only run when the user is logged in
                                                                                                                                                                                                                                                                                                                                                                      to a real tty.  When this flag is set, sudo can only be
                                                                                                                                                                                                                                                                                                                                                                      run from a login session and not via other means such
                                                                                                                                                                                                                                                                                                                                                                      as cron(8) or cgi-bin scripts.  This flag is off by
                                                                                                                                                                                                                                                                                                                                                                      default.
                                                                                                                                                                                                                                                                                                                                                          

                                                                                                                                                                                                                                                                                                                                                    • useAgentForwarding : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                      Exec the command using Agent Forwarding.

                                                                                                                                                                                                                                                                                                                                                      Allows a chain of ssh connections to forward key challenges back to the original agent, thus eliminating the need for using a password or public/private keys for these connections.

                                                                                                                                                                                                                                                                                                                                                      From the ssh(1) man page:

                                                                                                                                                                                                                                                                                                                                                              Enables forwarding of the authentication agent connection.  This can also be specified on a per-host basis in a configuration file.
                                                                                                                                                                                                                                                                                                                                                      
                                                                                                                                                                                                                                                                                                                                                              Agent forwarding should be enabled with caution.  Users with the ability to bypass file permissions on the remote host (for the agent's UNIX-domain socket) can access the local agent through the forwarded connection.
                                                                                                                                                                                                                                                                                                                                                              An attacker cannot obtain key material from the agent, however they can perform operations on the keys that enable them to authenticate using the identities loaded into the agent.
                                                                                                                                                                                                                                                                                                                                                          
                                                                                                                                                                                                                                                                                                                                                    • useSftpForExec : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                      Using SFTP protocol instead of SSH for Exec command.

                                                                                                                                                                                                                                                                                                                                                      Supported commands: mkdir, ln, symlink, rm, rmdir, cd, get, ls

                                                                                                                                                                                                                                                                                                                                                  • useWorkspaceInPromotion : boolean

                                                                                                                                                                                                                                                                                                                                                    Set the root directory for the Source files to the workspace.

                                                                                                                                                                                                                                                                                                                                                    By default this plugin uses the artifacts directory (where archived artifacts are stored). This allows the artifacts from the build number that you are promoting to be sent somewhere else.

                                                                                                                                                                                                                                                                                                                                                    If you run tasks that produce files in the workspace during the promotion and you want to publish them, then set this option.

                                                                                                                                                                                                                                                                                                                                                    If you need to send files from both the workspace and the archive directory, then you need to add a second server, even if you want to send the files to the same place. This is due to the fact that the workspace is not necessarily on the same host as the archive directory.

                                                                                                                                                                                                                                                                                                                                                  • usePromotionTimestamp : boolean

                                                                                                                                                                                                                                                                                                                                                    Use the build time of the promotion when the remote directory is a date format.

                                                                                                                                                                                                                                                                                                                                                    By default this plugin uses the time of the original build (the one that is being promoted) when formatting the remote directory. Setting this option will mean that if you use the remote directory is a date format option, it will use the time that the promotion process runs, instead of the original build.

                                                                                                                                                                                                                                                                                                                                                  • sshRetry

                                                                                                                                                                                                                                                                                                                                                    If publishing to this server or command execution fails, try again.

                                                                                                                                                                                                                                                                                                                                                    Files that were successfully transferred will not be re-sent.
                                                                                                                                                                                                                                                                                                                                                    If Exec command is configured, but fails in any way (including a non zero exit code), then it will be retried.

                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                    • retries : int
                                                                                                                                                                                                                                                                                                                                                      The number of times to retry this server in the event of failure.
                                                                                                                                                                                                                                                                                                                                                    • retryDelay : long
                                                                                                                                                                                                                                                                                                                                                      The time to wait, in milliseconds, before attempting another transfer.
                                                                                                                                                                                                                                                                                                                                                  • sshLabel

                                                                                                                                                                                                                                                                                                                                                    Set the label for this Server instance - for use with Parameterized publishing.

                                                                                                                                                                                                                                                                                                                                                    Expand the help for Parameterized publishing for more details.

                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                    • label : String

                                                                                                                                                                                                                                                                                                                                                      Set the label for this Server instance - for use with Parameterized publishing.

                                                                                                                                                                                                                                                                                                                                                      Expand the help for Parameterized publishing for more details.

                                                                                                                                                                                                                                                                                                                                                  • sshCredentials
                                                                                                                                                                                                                                                                                                                                                    Set the credentials to use with this connection.

                                                                                                                                                                                                                                                                                                                                                    If you want to use different credentials from those configured for this server, or if the credentials have not been specified for this server, then enable this option and set them here.

                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                    • username : String
                                                                                                                                                                                                                                                                                                                                                      The username to connect with.
                                                                                                                                                                                                                                                                                                                                                    • encryptedPassphrase : String
                                                                                                                                                                                                                                                                                                                                                      The passphrase for the private key, or the password for password authentication if no Key or Path to key is configured.
                                                                                                                                                                                                                                                                                                                                                      Leave blank if the key is not encrypted.
                                                                                                                                                                                                                                                                                                                                                    • key : String

                                                                                                                                                                                                                                                                                                                                                      The private key.

                                                                                                                                                                                                                                                                                                                                                      Paste the private key here, or provide the path to the file containing the key in Path to key.

                                                                                                                                                                                                                                                                                                                                                    • keyPath : String

                                                                                                                                                                                                                                                                                                                                                      The path to the private key.

                                                                                                                                                                                                                                                                                                                                                      Either supply the path to the file containing the key, or paste the key into the Key box.
                                                                                                                                                                                                                                                                                                                                                      The Path to key can be absolute, or relative to $JENKINS_HOME

                                                                                                                                                                                                                                                                                                                                                • continueOnError : boolean
                                                                                                                                                                                                                                                                                                                                                • failOnError : boolean
                                                                                                                                                                                                                                                                                                                                                • alwaysPublishFromMaster : boolean
                                                                                                                                                                                                                                                                                                                                                • masterNodeName : String
                                                                                                                                                                                                                                                                                                                                                • paramPublish
                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                  • parameterName : String
                                                                                                                                                                                                                                                                                                                                                    The name of the parameter or environment variable that will contain the expression for matching the labels.
                                                                                                                                                                                                                                                                                                                                              • batchFile
                                                                                                                                                                                                                                                                                                                                                • command : String
                                                                                                                                                                                                                                                                                                                                                • configuredLocalRules (optional)
                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                  • retainOnlyVariables

                                                                                                                                                                                                                                                                                                                                                    Limit which environment variables are passed to a build step.

                                                                                                                                                                                                                                                                                                                                                    Environment variables passed to the build step are filtered, unless listed below.

                                                                                                                                                                                                                                                                                                                                                    The behavior of this filter depends on whether the environment variable is originally defined outside Jenkins:

                                                                                                                                                                                                                                                                                                                                                    • If the environment variable originates from Jenkins configuration, such as JOB_URL, it will not be passed to the build step unless specified here.
                                                                                                                                                                                                                                                                                                                                                    • If the environment variable originates from outside Jenkins, such as PATH, the behavior depends on the option Process environment variables handling: If that option is set to Retain, the original value will be passed to the build step, discarding any modifications inside Jenkins. If that option is set to Remove, the variable will not be passed to the build step.

                                                                                                                                                                                                                                                                                                                                                    The following table shows the effect of filtering on an environment variable:

                                                                                                                                                                                                                                                                                                                                                    Behavior Originally defined outside Jenkins Originally defined inside Jenkins
                                                                                                                                                                                                                                                                                                                                                    Process environment variables handling: reset Variable is reset to original value Variable is removed
                                                                                                                                                                                                                                                                                                                                                    Process environment variables handling: removed Variable is removed Variable is removed
                                                                                                                                                                                                                                                                                                                                                    • processVariablesHandling (optional)
                                                                                                                                                                                                                                                                                                                                                      • Values: RESET, REMOVE
                                                                                                                                                                                                                                                                                                                                                    • retainCharacteristicEnvVars : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                      When checked, characteristic environment variables will be retained in addition to the variables listed above. These environment variables are job- and build-specific, defined by Jenkins, and are used to identify and kill processes started by this build step. See the documentation for more details on starting processes.

                                                                                                                                                                                                                                                                                                                                                    • variables : String (optional)

                                                                                                                                                                                                                                                                                                                                                      Whitespace separated, case insensitive list of environment variables that will be retained, i.e. not removed from the environment of this build step or reset to their default.

                                                                                                                                                                                                                                                                                                                                                • unstableReturn : int (optional)
                                                                                                                                                                                                                                                                                                                                                  If set, the batch errorlevel result that will be interpreted as an unstable build result. If the final errorlevel matches the value, the build results will be set to unstable and next steps will be continued. Supported values match the widest errorlevel range for Windows like systems. In Windows NT4 and beyond the ERRORLEVEL is stored as a four byte, signed integer, yielding maximum and minimum values of 2147483647 and -2147483648, respectively. Older versions of Windows use 2 bytes. DOS like systems use single byte, yielding errorlevels between 0-255. The value 0 is ignored and does not make the build unstable to keep the default behaviour consistent.
                                                                                                                                                                                                                                                                                                                                              • snBatchInstall
                                                                                                                                                                                                                                                                                                                                                • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                  User name and password defined in global credentials (credentials ID is required here) used for the instance where the application will be installed.
                                                                                                                                                                                                                                                                                                                                                • apiVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                  Optional. Version of the endpoint to access. For example, v1 or v2. Only specify this value to use an endpoint version other than the latest.
                                                                                                                                                                                                                                                                                                                                                • batchName : String (optional)
                                                                                                                                                                                                                                                                                                                                                  Required. User specified descriptive name for this batch request.
                                                                                                                                                                                                                                                                                                                                                • file : String (optional)
                                                                                                                                                                                                                                                                                                                                                  Name of the batch file with json manifest. If only a name is given or relative path then the file will be searched in WORKSPACE directory of the build.

                                                                                                                                                                                                                                                                                                                                                  The field is required if Use file is checked. If the field is not changed default value will be used: now_batch_manifest.json.

                                                                                                                                                                                                                                                                                                                                                • notes : String (optional)
                                                                                                                                                                                                                                                                                                                                                  User specified additional notes about the batch install plan.

                                                                                                                                                                                                                                                                                                                                                  Default: null

                                                                                                                                                                                                                                                                                                                                                • packages : String (optional)
                                                                                                                                                                                                                                                                                                                                                  Required. JSON array, where each object specifies details of a package to install.
                                                                                                                                                                                                                                                                                                                                                          
                                                                                                                                                                                                                                                                                                                                                      [{
                                                                                                                                                                                                                                                                                                                                                          "id": "String",
                                                                                                                                                                                                                                                                                                                                                          "load_demo_data": Boolean,
                                                                                                                                                                                                                                                                                                                                                          "notes": "String",
                                                                                                                                                                                                                                                                                                                                                          "requested_customized_version": "String",
                                                                                                                                                                                                                                                                                                                                                          "requested_version": "String",
                                                                                                                                                                                                                                                                                                                                                          "type": "String"
                                                                                                                                                                                                                                                                                                                                                      }]
                                                                                                                                                                                                                                                                                                                                                          
                                                                                                                                                                                                                                                                                                                                                      
                                                                                                                                                                                                                                                                                                                                                  id Required. Sys_id of the application or identifier of the plugin to install.
                                                                                                                                                                                                                                                                                                                                                  load_demo_data Flag that indicates whether demo data is loaded when installing the package.
                                                                                                                                                                                                                                                                                                                                                  Valid values:
                                                                                                                                                                                                                                                                                                                                                   true: Demo data should be loaded.
                                                                                                                                                                                                                                                                                                                                                   false: Demo data should not be loaded.
                                                                                                                                                                                                                                                                                                                                                  Default: false
                                                                                                                                                                                                                                                                                                                                                  notes User specified notes about the package.
                                                                                                                                                                                                                                                                                                                                                  Default: null
                                                                                                                                                                                                                                                                                                                                                  requested_customized_version Only applicable when packages.type is set to application. Version of the store application customization package to install, such as 1.0.2 or 2.3.
                                                                                                                                                                                                                                                                                                                                                  requested_customized_version Only applicable when packages.type is set to application. Version of the store application customization package to install, such as 1.0.2 or 2.3.

                                                                                                                                                                                                                                                                                                                                                  Default: None. If this is not set, then the system does not look for customizations for the application.
                                                                                                                                                                                                                                                                                                                                                  requested_version Required if type is set to application; ignored if set to plugin. Version of the package to install, such as 1.0.2 or 2.3.
                                                                                                                                                                                                                                                                                                                                                  type Required. Type of package.
                                                                                                                                                                                                                                                                                                                                                  Valid values:
                                                                                                                                                                                                                                                                                                                                                  • application
                                                                                                                                                                                                                                                                                                                                                  • plugin
                                                                                                                                                                                                                                                                                                                                                • url : String (optional)
                                                                                                                                                                                                                                                                                                                                                  ServiceNow instance url where the application will be installed.
                                                                                                                                                                                                                                                                                                                                                • useFile : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                  Specifies if manifest json file will be used to define the batch. The file can be stored in git repository (in this case SCM should be configured).

                                                                                                                                                                                                                                                                                                                                                  Default: false

                                                                                                                                                                                                                                                                                                                                              • snBatchRollback
                                                                                                                                                                                                                                                                                                                                                • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                  User name and password defined in global credentials (credentials ID is required here).
                                                                                                                                                                                                                                                                                                                                                  If ServiceNow Parameters are used, then credentials for installation instance will be used.
                                                                                                                                                                                                                                                                                                                                                • apiVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                  Optional. Version of the endpoint to access. For example, v1 or v2. Only specify this value to use an endpoint version other than the latest.
                                                                                                                                                                                                                                                                                                                                                • rollbackId : String (optional)
                                                                                                                                                                                                                                                                                                                                                  Unique identifier (sys_id) of the rollback installed before.
                                                                                                                                                                                                                                                                                                                                                • url : String (optional)
                                                                                                                                                                                                                                                                                                                                                  ServiceNow instance url where the batch of packages was installed.

                                                                                                                                                                                                                                                                                                                                                  If ServiceNow Parameters are used, then the URL of installation instance will be used.

                                                                                                                                                                                                                                                                                                                                              • $class: 'BeaglePlugin'
                                                                                                                                                                                                                                                                                                                                                • apptoken

                                                                                                                                                                                                                                                                                                                                                  Generate your Application Token From Beagle

                                                                                                                                                                                                                                                                                                                                                  Home -> Applications -> Select your Application -> Settings -> Application Token
                                                                                                                                                                                                                                                                                                                                                  • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                • accesstoken

                                                                                                                                                                                                                                                                                                                                                  Generate your Access Token From Beagle User Settings

                                                                                                                                                                                                                                                                                                                                                  Settings -> Access Token -> Generate Your New Personal Access Token
                                                                                                                                                                                                                                                                                                                                                  • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                              • $class: 'BeakerBuilder'
                                                                                                                                                                                                                                                                                                                                                • jobSource
                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                  • $class: 'FileJobSource'
                                                                                                                                                                                                                                                                                                                                                    • jobPath : String
                                                                                                                                                                                                                                                                                                                                                  • $class: 'StringJobSource'
                                                                                                                                                                                                                                                                                                                                                    • jobContent : String
                                                                                                                                                                                                                                                                                                                                                • downloadFiles : boolean
                                                                                                                                                                                                                                                                                                                                              • $class: 'BeginAnalysis'
                                                                                                                                                                                                                                                                                                                                                • logLevel
                                                                                                                                                                                                                                                                                                                                                  • Values: OFF, INFO, DEBUG, WARN, ERROR
                                                                                                                                                                                                                                                                                                                                                • buildSessionId : String
                                                                                                                                                                                                                                                                                                                                                • appName : String
                                                                                                                                                                                                                                                                                                                                                • moduleName : String
                                                                                                                                                                                                                                                                                                                                                • branch : String
                                                                                                                                                                                                                                                                                                                                                • enableMultipleBuildFiles : boolean
                                                                                                                                                                                                                                                                                                                                                • overrideJars : boolean
                                                                                                                                                                                                                                                                                                                                                • multipleBuildFiles : boolean
                                                                                                                                                                                                                                                                                                                                                • labId : String
                                                                                                                                                                                                                                                                                                                                                • testStage : String
                                                                                                                                                                                                                                                                                                                                                • packagesIncluded : String
                                                                                                                                                                                                                                                                                                                                                • packagesExcluded : String
                                                                                                                                                                                                                                                                                                                                                • filesIncluded : String
                                                                                                                                                                                                                                                                                                                                                • filesExcluded : String
                                                                                                                                                                                                                                                                                                                                                • classLoadersExcluded : String
                                                                                                                                                                                                                                                                                                                                                  In order to exclude class loaders from the build, please provide comma separated list of class loaders names to exclude. Class loader name should be the class loader full package name. e.g. 'com.example.package.SomeClassLoader'
                                                                                                                                                                                                                                                                                                                                                • recursive : boolean
                                                                                                                                                                                                                                                                                                                                                • workspacepath : String
                                                                                                                                                                                                                                                                                                                                                • buildScannerJar : String
                                                                                                                                                                                                                                                                                                                                                • testListenerJar : String
                                                                                                                                                                                                                                                                                                                                                • testListenerConfigFile : String
                                                                                                                                                                                                                                                                                                                                                • autoRestoreBuildFile : boolean
                                                                                                                                                                                                                                                                                                                                                • sealightsMavenPluginInstallationArguments : String
                                                                                                                                                                                                                                                                                                                                                • buildFilesPatterns : String
                                                                                                                                                                                                                                                                                                                                                • buildFilesFolders : String
                                                                                                                                                                                                                                                                                                                                                • logEnabled : boolean
                                                                                                                                                                                                                                                                                                                                                • logDestination
                                                                                                                                                                                                                                                                                                                                                  • Values: CONSOLE, FILE
                                                                                                                                                                                                                                                                                                                                                • logFolder : String
                                                                                                                                                                                                                                                                                                                                                • buildStrategy
                                                                                                                                                                                                                                                                                                                                                  • Values: ONE_BUILD, BUILD_EACH_MODULE
                                                                                                                                                                                                                                                                                                                                                • slMvnPluginVersion : String
                                                                                                                                                                                                                                                                                                                                                • buildName
                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                  • $class: 'DefaultBuildName'
                                                                                                                                                                                                                                                                                                                                                    • $class: 'EmptyBuildName'
                                                                                                                                                                                                                                                                                                                                                      • $class: 'LatestBuildName'
                                                                                                                                                                                                                                                                                                                                                        • $class: 'ManualBuildName'
                                                                                                                                                                                                                                                                                                                                                          • insertedBuildName : String
                                                                                                                                                                                                                                                                                                                                                        • $class: 'UpstreamBuildName'
                                                                                                                                                                                                                                                                                                                                                          • upstreamProjectName : String
                                                                                                                                                                                                                                                                                                                                                      • executionType
                                                                                                                                                                                                                                                                                                                                                        • Values: FULL, TESTS_ONLY, ONLY_LISTENER
                                                                                                                                                                                                                                                                                                                                                      • override_customerId : String
                                                                                                                                                                                                                                                                                                                                                      • override_url : String
                                                                                                                                                                                                                                                                                                                                                      • override_proxy : String
                                                                                                                                                                                                                                                                                                                                                      • additionalArguments : String
                                                                                                                                                                                                                                                                                                                                                        This section allows you to add additional arguments, as key-value pairs.
                                                                                                                                                                                                                                                                                                                                                        Example for additional arguments:

                                                                                                                                                                                                                                                                                                                                                        server=https://prod-sealights-gw.sealights.co
                                                                                                                                                                                                                                                                                                                                                        proxy=http://localhost:8888

                                                                                                                                                                                                                                                                                                                                                        Argument name Description
                                                                                                                                                                                                                                                                                                                                                        token The token provided to you by SeaLights (override the global 'token' value for this build).
                                                                                                                                                                                                                                                                                                                                                        tokenfile A file containing the token provided to you by SeaLights (override the global 'token' value for this build).
                                                                                                                                                                                                                                                                                                                                                        buildsessionidfile Set build session id file for this build.
                                                                                                                                                                                                                                                                                                                                                        createbuildsessionid When set to 'true' - forces SeaLights Maven Plugin to create new build session id (true by default).
                                                                                                                                                                                                                                                                                                                                                        proxy A valid URL to a proxy server.
                                                                                                                                                                                                                                                                                                                                                        agentpath Override the path to SeaLights jar.
                                                                                                                                                                                                                                                                                                                                                        javapath Override the path to the 'java' variable (default is 'java').
                                                                                                                                                                                                                                                                                                                                                        filesstorage A folder where sealights files for this build will be kept (override the global 'Files storage' value for this build).
                                                                                                                                                                                                                                                                                                                                                        sealightsJvmParams Key value pairs of environments variables which will be added to both buildscanner and test listener ('$$$'- separated pairs, ':'- separated key and value. i.e: sealightsJvmParams=param:value$$$anotherparam:anothervalue)
                                                                                                                                                                                                                                                                                                                                                        buildScannerParams Key value pairs of environments variables which will be added to buildscanner ('$$$'- separated pairs, ':'- separated key and value. i.e: buildScannerParams=param:value$$$anotherparam:anothervalue)
                                                                                                                                                                                                                                                                                                                                                        testListenerJvmParams Key value pairs of environments variables which will be added to test listener ('$$$'- separated pairs, ':'- separated key and value i.e: testListenerJvmParams=param:value$$$anotherparam:anothervalue)
                                                                                                                                                                                                                                                                                                                                                      • includeResources : boolean
                                                                                                                                                                                                                                                                                                                                                        When checked, the build session id and token files will be added to the artifacts as as resources in the folder.
                                                                                                                                                                                                                                                                                                                                                    • benchmark
                                                                                                                                                                                                                                                                                                                                                      • filepath : String
                                                                                                                                                                                                                                                                                                                                                        Please insert a filepath.
                                                                                                                                                                                                                                                                                                                                                    • $class: 'BitbucketPublisher'
                                                                                                                                                                                                                                                                                                                                                      • serverUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                        Bitbucket Server Url.
                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                        Credentials for bitucket server. The user must have access to create project and repository.
                                                                                                                                                                                                                                                                                                                                                      • projectKey : String (optional)
                                                                                                                                                                                                                                                                                                                                                        Input the project key for the bitbucket.
                                                                                                                                                                                                                                                                                                                                                      • createProject (optional)
                                                                                                                                                                                                                                                                                                                                                        Check this if you want to create the bitbucket project.
                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                        • projectName : String
                                                                                                                                                                                                                                                                                                                                                        • projectUsers : String
                                                                                                                                                                                                                                                                                                                                                        • projectGroups : String
                                                                                                                                                                                                                                                                                                                                                      • createJenkinsJobs (optional)
                                                                                                                                                                                                                                                                                                                                                        Check this if you want to use the bitbucket post commit external hook to call.
                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                        • ciServer : String
                                                                                                                                                                                                                                                                                                                                                      • projectName : String (optional)
                                                                                                                                                                                                                                                                                                                                                        Input name of the Bitbucket project.
                                                                                                                                                                                                                                                                                                                                                    • $class: 'BladeBuilder'
                                                                                                                                                                                                                                                                                                                                                      • blades
                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                        • $class: 'CodeScan'
                                                                                                                                                                                                                                                                                                                                                          • source : String
                                                                                                                                                                                                                                                                                                                                                          • exclude : String
                                                                                                                                                                                                                                                                                                                                                          • noCache : boolean
                                                                                                                                                                                                                                                                                                                                                          • noProxy : boolean
                                                                                                                                                                                                                                                                                                                                                          • noBlame : boolean
                                                                                                                                                                                                                                                                                                                                                          • ruleset : String
                                                                                                                                                                                                                                                                                                                                                          • severityLevel : String
                                                                                                                                                                                                                                                                                                                                                          • severityThreshold : int
                                                                                                                                                                                                                                                                                                                                                          • autoUpdate : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                          • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                          • debug : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                          • directory : String (optional)
                                                                                                                                                                                                                                                                                                                                                          • environment : String (optional)
                                                                                                                                                                                                                                                                                                                                                          • forceVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                          • ignoreFailure : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                          • onFailureCmd : String (optional)
                                                                                                                                                                                                                                                                                                                                                          • timeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                        • $class: 'ImageScan'
                                                                                                                                                                                                                                                                                                                                                          • image : String
                                                                                                                                                                                                                                                                                                                                                          • exclude : String
                                                                                                                                                                                                                                                                                                                                                          • noCache : boolean
                                                                                                                                                                                                                                                                                                                                                          • noProxy : boolean
                                                                                                                                                                                                                                                                                                                                                          • noBlame : boolean
                                                                                                                                                                                                                                                                                                                                                          • ruleset : String
                                                                                                                                                                                                                                                                                                                                                          • severityLevel : String
                                                                                                                                                                                                                                                                                                                                                          • severityThreshold : int
                                                                                                                                                                                                                                                                                                                                                          • autoUpdate : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                          • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                          • debug : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                          • directory : String (optional)
                                                                                                                                                                                                                                                                                                                                                          • environment : String (optional)
                                                                                                                                                                                                                                                                                                                                                          • forceVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                          • ignoreFailure : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                          • onFailureCmd : String (optional)
                                                                                                                                                                                                                                                                                                                                                          • timeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                    • $class: 'BlueprintLaunch'
                                                                                                                                                                                                                                                                                                                                                      • projectName : String

                                                                                                                                                                                                                                                                                                                                                        Project selection is mandatory.

                                                                                                                                                                                                                                                                                                                                                      • blueprintName : String

                                                                                                                                                                                                                                                                                                                                                        Blueprint selection is mandatory.

                                                                                                                                                                                                                                                                                                                                                      • applicationName : String

                                                                                                                                                                                                                                                                                                                                                        Application Name is mandatory.

                                                                                                                                                                                                                                                                                                                                                        This is the Application name used for blueprint launch in Nutanix Calm. Appending the _${BUILD_ID} to the Application name is recommended for unique application names. Other Jenkins Environment Variables may also be used.

                                                                                                                                                                                                                                                                                                                                                      • appProfileName : String

                                                                                                                                                                                                                                                                                                                                                        Application Profile selection is mandatory.

                                                                                                                                                                                                                                                                                                                                                      • actionName : String

                                                                                                                                                                                                                                                                                                                                                        The field is mandatory


                                                                                                                                                                                                                                                                                                                                                        Select the required action need to run after the application launch from the list of actions, else please select none.

                                                                                                                                                                                                                                                                                                                                                      • runtimeVariables : String

                                                                                                                                                                                                                                                                                                                                                        Click on Fetch Runtime Variables to fetch all editable variables for the selected Application Profile in JSON format. Modify the key values from the defaults as needed.The values can also reference jenkins environment variables.

                                                                                                                                                                                                                                                                                                                                                      • waitForSuccessFulLaunch : boolean
                                                                                                                                                                                                                                                                                                                                                      • blueprintDescription : String

                                                                                                                                                                                                                                                                                                                                                        Description is fetched from the selected Calm blueprint

                                                                                                                                                                                                                                                                                                                                                    • BMC DevOps for CFA Plugin
                                                                                                                                                                                                                                                                                                                                                      • server : String
                                                                                                                                                                                                                                                                                                                                                        URL or IP address.
                                                                                                                                                                                                                                                                                                                                                      • port : String
                                                                                                                                                                                                                                                                                                                                                        z/OSMF Port
                                                                                                                                                                                                                                                                                                                                                      • user : String
                                                                                                                                                                                                                                                                                                                                                        z/OS user name
                                                                                                                                                                                                                                                                                                                                                      • jclContent : String
                                                                                                                                                                                                                                                                                                                                                      • chkfreq : String
                                                                                                                                                                                                                                                                                                                                                      • jobCard : String
                                                                                                                                                                                                                                                                                                                                                      • acctno : String
                                                                                                                                                                                                                                                                                                                                                      • thresh : String
                                                                                                                                                                                                                                                                                                                                                      • sortby : String
                                                                                                                                                                                                                                                                                                                                                      • pswd : String
                                                                                                                                                                                                                                                                                                                                                      • prilog : String
                                                                                                                                                                                                                                                                                                                                                      • cfaLoadLibs
                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                        • lib : String
                                                                                                                                                                                                                                                                                                                                                      • cfaSldsLibs
                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                        • sldsname : String
                                                                                                                                                                                                                                                                                                                                                        • sldsver : String
                                                                                                                                                                                                                                                                                                                                                        • sldsunit : String
                                                                                                                                                                                                                                                                                                                                                        • sldsvolser : String
                                                                                                                                                                                                                                                                                                                                                      • cfaDliLibs
                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                        • dliname : String
                                                                                                                                                                                                                                                                                                                                                        • dliver : String
                                                                                                                                                                                                                                                                                                                                                        • dliunit : String
                                                                                                                                                                                                                                                                                                                                                        • dlivolser : String
                                                                                                                                                                                                                                                                                                                                                      • cfaJobnames
                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                        • jobname : String
                                                                                                                                                                                                                                                                                                                                                      • cfaReconSets
                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                        • recon1 : String
                                                                                                                                                                                                                                                                                                                                                        • recon2 : String
                                                                                                                                                                                                                                                                                                                                                        • recon3 : String
                                                                                                                                                                                                                                                                                                                                                      • goodRC : String
                                                                                                                                                                                                                                                                                                                                                        Any value that is above the acceptable return code will be considered as FAILURE.
                                                                                                                                                                                                                                                                                                                                                      • bmcSlds : boolean

                                                                                                                                                                                                                                                                                                                                                        You can use the SLDS keyword on the ANALYZE control statement to identify explicitly an input log data set to use as input to the analysis process. SLDS=(dataSetName,Rvr, unit,volser) If you want CFA to read multiple log data sets, specify multiple instances of the SLDS keyword.
                                                                                                                                                                                                                                                                                                                                                        Example: IMSA is an IMS version 14.1 system and creates generations of SLDSs that use the naming convention imsid.SLDS.Ddate.GENnnn. The SLDSs are cataloged. To analyze log records that IMSA wrote to generations 10 through 12 on March 29, 2015, specify the following keywords on the ANALYZE control statement:
                                                                                                                                                                                                                                                                                                                                                        SLDS=(IMSA.SLDS.D2008088.GEN010, R141)
                                                                                                                                                                                                                                                                                                                                                        SLDS=(IMSA.SLDS.D2008088.GEN011, R141)
                                                                                                                                                                                                                                                                                                                                                        SLDS=(IMSA.SLDS.D2008088.GEN012, R141)

                                                                                                                                                                                                                                                                                                                                                      • bmcDb2log : boolean

                                                                                                                                                                                                                                                                                                                                                        You can use the DB2LOG keyword on the ANALYZE control statement to identify a DB2 log data set that was created by a DB2 subsystem.
                                                                                                                                                                                                                                                                                                                                                        Note: If you specify the DB2LOG keyword, do not specify the DB2BSDS keyword.

                                                                                                                                                                                                                                                                                                                                                      • db2log : String
                                                                                                                                                                                                                                                                                                                                                        Specify the fully qualified data set name. No default value is provided.
                                                                                                                                                                                                                                                                                                                                                        If you omit the DB2LOG keyword, CFA does not read any DB2 logs.
                                                                                                                                                                                                                                                                                                                                                      • db2bsds : String
                                                                                                                                                                                                                                                                                                                                                      • limit : String
                                                                                                                                                                                                                                                                                                                                                      • skip : String
                                                                                                                                                                                                                                                                                                                                                      • maxlogs : String

                                                                                                                                                                                                                                                                                                                                                        If you specify a value from 1 through 999, Log Analyzer stops reading log data sets after it reaches the specified number of log data sets. If Log Analyzer does not read other log data sets because the specified limit was reached, a warning message indicates the number of log data sets that were not read.

                                                                                                                                                                                                                                                                                                                                                        If you want Log Analyzer to read all log data sets, specify MAXLOGS=999.

                                                                                                                                                                                                                                                                                                                                                        The default is MAXLOGS=100 (Log Analyzer reads a maximum of 100 log data sets).

                                                                                                                                                                                                                                                                                                                                                      • bmcDb2bsds : boolean

                                                                                                                                                                                                                                                                                                                                                        You can use the DB2BSDS keyword on the ANALYZE control statement to identify a DB2 bootstrap data set (BSDS).
                                                                                                                                                                                                                                                                                                                                                        Specify the fully qualified data set name. This name should refer to a VSAM key-sequenced data set (KSDS).
                                                                                                                                                                                                                                                                                                                                                        Do not specify the name of a BSDS archive copy, which is not a VSAM KSDS. BSDS cannot be a TAPE dataset.
                                                                                                                                                                                                                                                                                                                                                        Note:

                                                                                                                                                                                                                                                                                                                                                        • No default value is provided. If you omit the DB2BSDS keyword, CFA does not read any DB2 BSDSs.
                                                                                                                                                                                                                                                                                                                                                        • If you specify the DB2BSDS keyword, do not specify the DB2LOG keyword.

                                                                                                                                                                                                                                                                                                                                                      • bmcLimit : boolean

                                                                                                                                                                                                                                                                                                                                                        You can use the LIMIT keyword (or the LIM abbreviation) on the ANALYZE control statement to set a limit on the number (1 through 9999999999) of log records to process from an input log data set.
                                                                                                                                                                                                                                                                                                                                                        Note:

                                                                                                                                                                                                                                                                                                                                                        • The default is LIMIT=9999999999.
                                                                                                                                                                                                                                                                                                                                                        • If you specify the LIMIT keyword, you must specify one SLDS keyword. The SLDS keyword is required, and multiple SLDS keywords are not allowed.

                                                                                                                                                                                                                                                                                                                                                      • bmcSkip : boolean

                                                                                                                                                                                                                                                                                                                                                        You can use the SKIP keyword on the ANALYZE control statement to specify a number (1 through 9999999999) of log records in an input log data set to skip before CFA begins to process records.
                                                                                                                                                                                                                                                                                                                                                        The default is SKIP=0, which skips no records.
                                                                                                                                                                                                                                                                                                                                                        Note:
                                                                                                                                                                                                                                                                                                                                                        If you specify the SKIP keyword, you must specify one SLDS keyword. The SLDS keyword is required, and multiple SLDS keywords are not allowed.

                                                                                                                                                                                                                                                                                                                                                      • bmcActiveOlds : boolean
                                                                                                                                                                                                                                                                                                                                                        You can use the ACTIVEOLDS keyword (or the AOLDS abbreviation) on the ANALYZE control statement to specify whether CFA can select an active OLDS during RECON processing
                                                                                                                                                                                                                                                                                                                                                      • bmcImsid : boolean

                                                                                                                                                                                                                                                                                                                                                        You can use the IMSID keyword on the ANALYZE control statement to specify one or more IMSIDs.
                                                                                                                                                                                                                                                                                                                                                        If you do not check this option,then the the default IMSID=ALL will be taken and all log records for all IMS systems that are associated with the input RECON data set (or data sets) will be considered.
                                                                                                                                                                                                                                                                                                                                                        Note:
                                                                                                                                                                                                                                                                                                                                                        If you specify the SLDS keyword, you cannot specify the IMSID keyword. The IMSID keyword applies only if CFA is reading RECON data sets to determine which log data sets to process.

                                                                                                                                                                                                                                                                                                                                                      • bmcDlilog : boolean

                                                                                                                                                                                                                                                                                                                                                        You can use the DLILOG keyword on the ANALYZE control statement to identify explicitly an input dli log data set to use as input to the analysis process.
                                                                                                                                                                                                                                                                                                                                                        Specify the keyword values as follows:
                                                                                                                                                                                                                                                                                                                                                        DLILOG=(dataSetName,Rnn)
                                                                                                                                                                                                                                                                                                                                                        DLILOG=(dataSetName,Rvr,unit,volser)
                                                                                                                                                                                                                                                                                                                                                        Notes:

                                                                                                                                                                                                                                                                                                                                                        • This keyword is used only for the APPCHECK report.
                                                                                                                                                                                                                                                                                                                                                        • The DLILOG datasets that are processed for the APPCHECK report for DLI are the DLI logs created by using the DLI batch job that uses the //IEFRDER DD statement. For more information about //IEFRDER DD, refer to the IBM IMS Program Restart Facility for z/OS documentation.
                                                                                                                                                                                                                                                                                                                                                      • bmcMaxlogs : boolean
                                                                                                                                                                                                                                                                                                                                                        You can use the MAXLOGS keyword (or the MAXL abbreviation) on the ANALYZE control statement to control the number of log data sets that Log Analyzer processes.

                                                                                                                                                                                                                                                                                                                                                        Use this keyword when you are using implicit specification of log data sets and Log Analyzer is reading RECON data sets to determine which log data sets to process. In this case, the number of log data sets to be processed is unknown. The MAXLOGS keyword can help you prevent a problem that could result from processing an excessive number of log data sets.

                                                                                                                                                                                                                                                                                                                                                        The MAXLOGS keyword works differently, depending on how you specify the value:

                                                                                                                                                                                                                                                                                                                                                      • bmcJobname : boolean

                                                                                                                                                                                                                                                                                                                                                        You can use the JOBNAME keyword on the ANALYZE control statement to specify one or more JOBNAMEs. Each JOBNAME (one to eight characters) identifies a Job name. Log Analyzer uses the JOBNAME when determining which dli log data sets to use as input.
                                                                                                                                                                                                                                                                                                                                                        To process log records for all Job names that are associated with the input RECON data set (or data sets), specify JOBNAME=ALL.
                                                                                                                                                                                                                                                                                                                                                        If you omit the JOBNAME sub-keyword, Log Analyzer uses the default value ALL.
                                                                                                                                                                                                                                                                                                                                                        Note:

                                                                                                                                                                                                                                                                                                                                                        • If you specify the DLILOGS keyword, you cannot specify the JOBNAME keyword. The JOBNAME keyword applies only if Log Analyzer is reading RECON data sets to determine which log data sets to process.
                                                                                                                                                                                                                                                                                                                                                        • Log Analyzer will process all the jobs in the DLILOGs that get selected by the JOBNAME filter.
                                                                                                                                                                                                                                                                                                                                                        • To later filter the report by job name, use the JOB sub-keyword of the APPCHECK report.

                                                                                                                                                                                                                                                                                                                                                      • cfaImsids
                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                        • imsid : String
                                                                                                                                                                                                                                                                                                                                                      • bmcRecon : boolean

                                                                                                                                                                                                                                                                                                                                                        You can use the RECON keyword on the ANALYZE control statement to specify the names of a set of RECON data sets to examine during the CFA job.

                                                                                                                                                                                                                                                                                                                                                        If you want CFA to examine multiple sets of RECON data sets, you must specify each set with a separate RECON keyword.

                                                                                                                                                                                                                                                                                                                                                        If you specify the RECON keyword, your user ID must have Security Access Facility (SAF) READ access to the RECON data sets.

                                                                                                                                                                                                                                                                                                                                                        You can specify from one to three data set names. One of the specified data set names must be designated as COPY1 by IMS.

                                                                                                                                                                                                                                                                                                                                                        Example:
                                                                                                                                                                                                                                                                                                                                                        The RECON data sets for the IMSA system are named IMSA.RECON1 and IMSA.RECON2, and the RECON data sets for the IMSB system are named IMSB.RECON1 and IMSB.RECON2. To examine IMSA and IMSB RECON data sets in the CFA job, specify the following keywords on the ANALYZE control statement:
                                                                                                                                                                                                                                                                                                                                                        RECON=(IMSA.RECON1, IMSA.RECON2)
                                                                                                                                                                                                                                                                                                                                                        RECON=(IMSB.RECON1, IMSB.RECON2)
                                                                                                                                                                                                                                                                                                                                                        Note:
                                                                                                                                                                                                                                                                                                                                                        If you specify the RECON keyword, you must specify the INTERVAL control statement with a START time value and a STOP time value.

                                                                                                                                                                                                                                                                                                                                                      • bmcTimezone : boolean
                                                                                                                                                                                                                                                                                                                                                        You can use the TIMEZONE keyword on the ANALYZE control statement to specify how time values are interpreted when you are specifying time input values and when CFA is displaying time values in reports and on panels.
                                                                                                                                                                                                                                                                                                                                                        Note:
                                                                                                                                                                                                                                                                                                                                                        The default is TIMEZONE=LOCAL.
                                                                                                                                                                                                                                                                                                                                                      • bmcStartInterval : boolean

                                                                                                                                                                                                                                                                                                                                                        You can use the START keyword on the INTERVAL control statement for the following purposes:

                                                                                                                                                                                                                                                                                                                                                        • Specify the beginning a range of log records to identify as candidates for the record selection process.
                                                                                                                                                                                                                                                                                                                                                        • Control the beginning of range of log data sets to allocate from RECON information.
                                                                                                                                                                                                                                                                                                                                                        • Reduce the overall number of log records that are selected from input SLDS or extract files.

                                                                                                                                                                                                                                                                                                                                                      • bmcStopInterval : boolean

                                                                                                                                                                                                                                                                                                                                                        You can use the STOP keyword on the INTERVAL control statement for the following purposes:
                                                                                                                                                                                                                                                                                                                                                        � Specify the end of a range of log records to identify as candidates for the record selection process
                                                                                                                                                                                                                                                                                                                                                        � Control the end of range of log data sets to allocate from RECON information
                                                                                                                                                                                                                                                                                                                                                        � Reduce the overall number of log records that are selected from input SLDS or extract files

                                                                                                                                                                                                                                                                                                                                                      • start
                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                                        • startDate : String
                                                                                                                                                                                                                                                                                                                                                        • startlogSeq : String
                                                                                                                                                                                                                                                                                                                                                      • stop
                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                                        • stopDate : String
                                                                                                                                                                                                                                                                                                                                                        • stoplogSeq : String
                                                                                                                                                                                                                                                                                                                                                      • tz
                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                                        • timezoneoffset : String
                                                                                                                                                                                                                                                                                                                                                      • jobInclude : String
                                                                                                                                                                                                                                                                                                                                                      • jobExclude : String
                                                                                                                                                                                                                                                                                                                                                      • psbInclude : String
                                                                                                                                                                                                                                                                                                                                                      • psbExclude : String
                                                                                                                                                                                                                                                                                                                                                      • maxlogsRc : String

                                                                                                                                                                                                                                                                                                                                                        If you specify a value from 1 through 999 followed by literal R and a return code (08 through 99), Log Analyzer issues the specified return code and terminates the job step if more than the specified number of log data sets would be read. Log Analyzer issues the return code at the conclusion of the RECON analysis phase without reading any input log data sets.

                                                                                                                                                                                                                                                                                                                                                        Example:

                                                                                                                                                                                                                                                                                                                                                        If you want Log Analyzer to issue return code 16 and terminate the job step if more than 10 log data sets would be read, specify the following keyword on the ANALYZE control statement:

                                                                                                                                                                                                                                                                                                                                                        MAXLOGS=(10,R16)

                                                                                                                                                                                                                                                                                                                                                      • maxlogsAbend : String

                                                                                                                                                                                                                                                                                                                                                        If you specify a value from 1 through 999 followed by an abend code (1 through 4095), Log Analyzer issues a user abend code and terminates the job step if more than the specified number of log data sets would be read. Log Analyzer issues the user abend at the conclusion of the RECON analysis phase without reading any input log data sets.

                                                                                                                                                                                                                                                                                                                                                        Example:

                                                                                                                                                                                                                                                                                                                                                        If you want Log Analyzer to issue a user abend, with abend code U4000, if more than 120 log data sets would be read, specify the following keyword on the ANALYZE control statement:

                                                                                                                                                                                                                                                                                                                                                        MAXLOGS=(120,4000)

                                                                                                                                                                                                                                                                                                                                                      • bmcJobInc : boolean
                                                                                                                                                                                                                                                                                                                                                        This OPTION includes information for BMP jobs with the specified job names and omits information for all other jobs that CFA finds in the input logs.
                                                                                                                                                                                                                                                                                                                                                      • bmcJobExc : boolean
                                                                                                                                                                                                                                                                                                                                                        This OPTION omits information for BMP jobs with the specified job names and includes information for all other jobs that CFA finds in the input logs. For jobName, specify the name of each job to include or exclude. You can specify multiple names (separated by commas). You can use wildcards (* and %)
                                                                                                                                                                                                                                                                                                                                                      • bmcPsbInc : boolean
                                                                                                                                                                                                                                                                                                                                                        This OPTION includes information for BMP jobs with the specified PSB names and omits information for all other BMP jobs that CFA finds in the input logs
                                                                                                                                                                                                                                                                                                                                                      • bmcPsbExc : boolean
                                                                                                                                                                                                                                                                                                                                                        This OPTION omits information for BMP jobs with the specified PSB names and includes information for all other BMP jobs that CFA finds in the input logs. For psbName, specify the name of each PSB to include or exclude. You can specify multiple names (separated by commas). You can use wildcards (* and %)
                                                                                                                                                                                                                                                                                                                                                      • bmcChkfreq : boolean
                                                                                                                                                                                                                                                                                                                                                        You can use the CHKFREQ subkeyword in an APPCHECK expression to filter the information in the Application Checkpoint report, based on checkpoint frequency.
                                                                                                                                                                                                                                                                                                                                                      • bmcThresh : boolean
                                                                                                                                                                                                                                                                                                                                                        You can use the THRESH subkeyword in an APPCHECK expression to specify the time unit to use for the threshold value in a checkpoint frequency filter. Valid values are MIN (minutes) and SEC (seconds). If you omit the THRESH subkeyword, CFA uses the default value MIN.
                                                                                                                                                                                                                                                                                                                                                      • bmcPrilog : boolean

                                                                                                                                                                                                                                                                                                                                                        You can use the PRILOG keyword on the ANALYZE control statement to specify the logs type associated with the input RECON data set (or data sets) to use as input to the analysis process.
                                                                                                                                                                                                                                                                                                                                                        You can select one of the following values:

                                                                                                                                                                                                                                                                                                                                                        • SLDS - Process SLDS associated with the input RECON data set (or data sets).
                                                                                                                                                                                                                                                                                                                                                        • DLI - Process DLI datasets associated with the input RECON data set (or data sets).
                                                                                                                                                                                                                                                                                                                                                        • BOTH - Process SLDS and DLI datasets associated with the input RECON data set (or data sets).
                                                                                                                                                                                                                                                                                                                                                        Note:
                                                                                                                                                                                                                                                                                                                                                        • If you omit the PRILOG option, Log Analyzer uses the default value SLDS.
                                                                                                                                                                                                                                                                                                                                                        • If you select the SLDS keyword, you cannot specify the PRILOG keyword. The PRILOG keyword applies only if CFA is reading RECON data sets to determine which log data sets to process.

                                                                                                                                                                                                                                                                                                                                                      • bmcAppcheck : boolean
                                                                                                                                                                                                                                                                                                                                                        You can use the APPCHECK keyword on the REPORTS control statement to control production of the Application Checkpoint report.
                                                                                                                                                                                                                                                                                                                                                      • bmcAll : boolean
                                                                                                                                                                                                                                                                                                                                                        To produce the Application Checkpoint report with default filters, specify APPCHECK=ALL. With this keyword, CFA includes all batch message processing (BMP) jobs that are found in the input logs, and does not filter the information by checkpoint frequency.
                                                                                                                                                                                                                                                                                                                                                      • bmcLsec : boolean
                                                                                                                                                                                                                                                                                                                                                        You can use the LSEC subkeyword in an APPCHECK expression to display the LUOW information with job duration of less than a second for jobs in the Application Checkpoint report.
                                                                                                                                                                                                                                                                                                                                                      • chkfreqval : String
                                                                                                                                                                                                                                                                                                                                                      • bmcPlanInc : boolean
                                                                                                                                                                                                                                                                                                                                                        This OPTION includes information for batch jobs with the specified Plan names and omits information for all other batch jobs that CFA finds in the input logs.
                                                                                                                                                                                                                                                                                                                                                      • planInclude : String
                                                                                                                                                                                                                                                                                                                                                      • bmcPlanExc : boolean
                                                                                                                                                                                                                                                                                                                                                        This OPTION omits information for batch jobs with the specified Plan names and includes information for all other batch jobs that CFA finds in the input logs. For PlanName, specify the name of each Plan to include or exclude. You can specify multiple names (separated by commas). You can use wildcards (* and %).
                                                                                                                                                                                                                                                                                                                                                      • planExclude : String
                                                                                                                                                                                                                                                                                                                                                      • bmcSortby : boolean
                                                                                                                                                                                                                                                                                                                                                        You can use the SORTBY subkeyword in an APPCHECK expression to sort the information in the Application Checkpoint report, based on either checkpoint frequency or start time.
                                                                                                                                                                                                                                                                                                                                                      • bmcCsv : boolean
                                                                                                                                                                                                                                                                                                                                                        You can use the CSVRPT subkeyword to create output file in CSV form. Log Analyzer writes the CSV reports to SYSOUT-type data sets.
                                                                                                                                                                                                                                                                                                                                                      • bmcFullreport : boolean
                                                                                                                                                                                                                                                                                                                                                        View Full report shows CSV file in MS excel application.
                                                                                                                                                                                                                                                                                                                                                    • BMC DevOps for BMC AMI Change Manager for IMS TM Plugin
                                                                                                                                                                                                                                                                                                                                                      • server : String
                                                                                                                                                                                                                                                                                                                                                        URL or IP address.
                                                                                                                                                                                                                                                                                                                                                      • port : String
                                                                                                                                                                                                                                                                                                                                                        z/OSMF Port
                                                                                                                                                                                                                                                                                                                                                      • user : String
                                                                                                                                                                                                                                                                                                                                                        z/OS user name
                                                                                                                                                                                                                                                                                                                                                      • pswd : String
                                                                                                                                                                                                                                                                                                                                                      • jclContent : String
                                                                                                                                                                                                                                                                                                                                                      • jclType : String
                                                                                                                                                                                                                                                                                                                                                      • dlist : String
                                                                                                                                                                                                                                                                                                                                                        The DELTA List PDS member name is also the DELTA List name. Any valid PDS member name is acceptable to BMC AMI Change Manager for IMS TM.
                                                                                                                                                                                                                                                                                                                                                      • jobCard : String
                                                                                                                                                                                                                                                                                                                                                      • acctno : String
                                                                                                                                                                                                                                                                                                                                                      • dPds : String
                                                                                                                                                                                                                                                                                                                                                        DELTA Lists for all BMC AMI Change Manager for IMS TM users are stored in the active DELTA List library (PDS).
                                                                                                                                                                                                                                                                                                                                                        The DELTA List PDS is normally allocated with RECFM=VB, LRECL=259, and BLKSIZE=23476. Although the block size could be shortened or lengthened as needed, half-track blocking is recommended.
                                                                                                                                                                                                                                                                                                                                                      • dOptionsPds : String

                                                                                                                                                                                                                                                                                                                                                        Specify the name of the data set where the BMC AMI Change Manager for IMS TM Global Options load module (DLP$GBL0) should be stored or retrieved.

                                                                                                                                                                                                                                                                                                                                                        It is recommended that you use the same data set that contains the IMSID options modules (DLP#iiii), and Group options modules (DLPZgggg).

                                                                                                                                                                                                                                                                                                                                                        This data set should have been created during BMC AMI Change Manager for IMS TM installation. JCL to allocate this data set is included in the BMC AMI Change Manager for IMS TM control library.

                                                                                                                                                                                                                                                                                                                                                      • target : String
                                                                                                                                                                                                                                                                                                                                                        IMSID or GROUP NAME in which to execute the DELTA List.
                                                                                                                                                                                                                                                                                                                                                      • mode : String
                                                                                                                                                                                                                                                                                                                                                        Option 'Optimize execution', instructs DELTA PLUS to attempt execution of the ENTIRE DELTA List as a single unit-of-work in IMS. This is the recommended mode due to the speed in which the request is executed.

                                                                                                                                                                                                                                                                                                                                                        Note: You must select this option for a DELTA List that is defined as Dependent to execute in the fashion Dependent implies.

                                                                                                                                                                                                                                                                                                                                                        Option 'One element at a time', instructs BMC AMI Change Manager for IMS TM to execute the DELTA List sequentially, one element at a time. This mode is much slower than Optimize execution mode. However, there are certain occasions when one element at a time is desirable. For example, transactions T1, T2 and T3 all require the MAXRGN parameter be changed from 3 to 4. Since they must be stopped before they can be revised, you want them stopped for the shortest amount of time possible. With Optimized mode, ALL the /STOP commands are done BEFORE the DELTA revise is done, and ALL the /START commands are done AFTER the revise is done. Using 'One element at a time' mode, the /STOP is done for T1, T1 is revised, then the /START command for T1 is issued before any activity takes place for T2 or T3.

                                                                                                                                                                                                                                                                                                                                                        This mode contains suboption Pause after elements with errors which instructs BMC AMI Change Manager for IMS TM to stop the DELTA List execution when an error is encountered. For additional information on the Pause option, place the cursor on the phrase highlighted above, and press HELP (F1).

                                                                                                                                                                                                                                                                                                                                                      • ims_cmd : String

                                                                                                                                                                                                                                                                                                                                                        It will process an EXECUTE input record to insert an IMS Command Element into the Delta List PDS Member.

                                                                                                                                                                                                                                                                                                                                                        The EXECUTE input record format is as follows: EXECUTE /CMD Command_Parameters

                                                                                                                                                                                                                                                                                                                                                        e.g.: EXECUTE /STO PROG PGMD

                                                                                                                                                                                                                                                                                                                                                      • title : String
                                                                                                                                                                                                                                                                                                                                                        Title of the DELTA List. A maximum of 28 characters is allowed.
                                                                                                                                                                                                                                                                                                                                                      • notes : String
                                                                                                                                                                                                                                                                                                                                                        Notes for the Delta List Member
                                                                                                                                                                                                                                                                                                                                                      • dlistRecords
                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                        • action : String
                                                                                                                                                                                                                                                                                                                                                        • elementType : String
                                                                                                                                                                                                                                                                                                                                                        • elementName : String
                                                                                                                                                                                                                                                                                                                                                        • ims_cmd : String
                                                                                                                                                                                                                                                                                                                                                        • appnewname : String
                                                                                                                                                                                                                                                                                                                                                        • appres : String
                                                                                                                                                                                                                                                                                                                                                        • dbnewname : String
                                                                                                                                                                                                                                                                                                                                                        • dbres : String
                                                                                                                                                                                                                                                                                                                                                        • acc : String
                                                                                                                                                                                                                                                                                                                                                        • auto : String
                                                                                                                                                                                                                                                                                                                                                        • rand : String
                                                                                                                                                                                                                                                                                                                                                        • randonly : String
                                                                                                                                                                                                                                                                                                                                                        • rldareas : String
                                                                                                                                                                                                                                                                                                                                                        • iovfext : String
                                                                                                                                                                                                                                                                                                                                                        • dbrelgsam : String
                                                                                                                                                                                                                                                                                                                                                        • dbcopyacb : String
                                                                                                                                                                                                                                                                                                                                                        • apprelgsam : String
                                                                                                                                                                                                                                                                                                                                                        • appcopyacb : String
                                                                                                                                                                                                                                                                                                                                                        • ty : String
                                                                                                                                                                                                                                                                                                                                                        • schd : String
                                                                                                                                                                                                                                                                                                                                                        • appfp : String
                                                                                                                                                                                                                                                                                                                                                        • dyn : String
                                                                                                                                                                                                                                                                                                                                                        • gpsb : String
                                                                                                                                                                                                                                                                                                                                                        • lang : String
                                                                                                                                                                                                                                                                                                                                                        • apptls : String
                                                                                                                                                                                                                                                                                                                                                        • rtcnewname : String
                                                                                                                                                                                                                                                                                                                                                        • rtcinq : String
                                                                                                                                                                                                                                                                                                                                                        • rtcpsbname : String
                                                                                                                                                                                                                                                                                                                                                        • psb : String
                                                                                                                                                                                                                                                                                                                                                        • trannewname : String
                                                                                                                                                                                                                                                                                                                                                        • wfi : String
                                                                                                                                                                                                                                                                                                                                                        • npri : String
                                                                                                                                                                                                                                                                                                                                                        • lpri : String
                                                                                                                                                                                                                                                                                                                                                        • lco : String
                                                                                                                                                                                                                                                                                                                                                        • mseg : String
                                                                                                                                                                                                                                                                                                                                                        • resp : String
                                                                                                                                                                                                                                                                                                                                                        • cl : String
                                                                                                                                                                                                                                                                                                                                                        • plc : String
                                                                                                                                                                                                                                                                                                                                                        • time : String
                                                                                                                                                                                                                                                                                                                                                        • para : String
                                                                                                                                                                                                                                                                                                                                                        • uschd : String
                                                                                                                                                                                                                                                                                                                                                        • traninq : String
                                                                                                                                                                                                                                                                                                                                                        • recv : String
                                                                                                                                                                                                                                                                                                                                                        • tranfp : String
                                                                                                                                                                                                                                                                                                                                                        • emhs : String
                                                                                                                                                                                                                                                                                                                                                        • mper : String
                                                                                                                                                                                                                                                                                                                                                        • uc : String
                                                                                                                                                                                                                                                                                                                                                        • edit : String
                                                                                                                                                                                                                                                                                                                                                        • lsid : String
                                                                                                                                                                                                                                                                                                                                                        • rsid : String
                                                                                                                                                                                                                                                                                                                                                        • spa : String
                                                                                                                                                                                                                                                                                                                                                        • spad : String
                                                                                                                                                                                                                                                                                                                                                        • segs : String
                                                                                                                                                                                                                                                                                                                                                        • oseg : String
                                                                                                                                                                                                                                                                                                                                                        • msc : String
                                                                                                                                                                                                                                                                                                                                                        • dc : String
                                                                                                                                                                                                                                                                                                                                                        • mreg : String
                                                                                                                                                                                                                                                                                                                                                        • ser : String
                                                                                                                                                                                                                                                                                                                                                        • aoi : String
                                                                                                                                                                                                                                                                                                                                                        • trantls : String
                                                                                                                                                                                                                                                                                                                                                        • exptm : String
                                                                                                                                                                                                                                                                                                                                                        • terminalmask : String
                                                                                                                                                                                                                                                                                                                                                        • terminalnewname : String
                                                                                                                                                                                                                                                                                                                                                        • sign : String
                                                                                                                                                                                                                                                                                                                                                        • ltermmask : String
                                                                                                                                                                                                                                                                                                                                                        • ltermnewname : String
                                                                                                                                                                                                                                                                                                                                                        • ass : String
                                                                                                                                                                                                                                                                                                                                                        • msn : String
                                                                                                                                                                                                                                                                                                                                                        • l61 : String
                                                                                                                                                                                                                                                                                                                                                        • subpoolmask : String
                                                                                                                                                                                                                                                                                                                                                        • subpoolnewname : String
                                                                                                                                                                                                                                                                                                                                                        • msg : String
                                                                                                                                                                                                                                                                                                                                                        • bmcAppNew : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcAppRes : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcDbNewname : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcDbRes : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcAcc : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcAuto : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcRand : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcRandOnly : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcRldAreas : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcIoVfExt : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcDbCopyAcb : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcDbRelGsam : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcAppCopyAcb : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcAppRelGsam : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcTy : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcSchd : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcAppFp : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcDyn : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcGpsb : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcLang : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcApptls : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcRtcsPsbName : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcRtcInq : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcRtcsNew : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcPsb : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcTranNewName : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcWfi : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcNpri : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcLpri : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcLco : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcMseg : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcResp : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcCl : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcPlc : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcTime : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcPara : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcUschd : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcTranInq : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcRecv : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcTranFp : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcEmhs : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcMper : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcUc : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcEdit : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcLsid : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcRsid : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcSpa : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcSpad : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcSegs : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcOseg : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcMsc : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcDc : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcMreg : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcSer : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcAoi : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcTls : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcExptm : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcTermMask : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcTermNew : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcSign : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcLtermMask : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcLtermNew : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcAss : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcMsn : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcL61 : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcSpMask : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcSpNewName : boolean
                                                                                                                                                                                                                                                                                                                                                        • bmcMsg : boolean
                                                                                                                                                                                                                                                                                                                                                      • dlpLoadLibs
                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                        • lib : String
                                                                                                                                                                                                                                                                                                                                                      • vds : String
                                                                                                                                                                                                                                                                                                                                                        (Optional)
                                                                                                                                                                                                                                                                                                                                                        Specify the name of the member (the Variable Definition Set) in the Variable Definition Library that contains the variable definitions for this DELTA List. The Variable Definition Sets are members that contain the definitions for the symbolic variables used by BMC AMI Change Manager for IMS TM in DELTA List processing.
                                                                                                                                                                                                                                                                                                                                                      • goodRC : String
                                                                                                                                                                                                                                                                                                                                                        Any value that is above the acceptable return code will be considered as FAILURE.
                                                                                                                                                                                                                                                                                                                                                      • dependent : boolean
                                                                                                                                                                                                                                                                                                                                                      • mark : boolean

                                                                                                                                                                                                                                                                                                                                                        Select this field to inform BMC AMI Change Manager for IMS TM to execute Marked elements only.

                                                                                                                                                                                                                                                                                                                                                        A beneficial use of this function is a DELTA List containing many elements that has failed. Instead of creating another DELTA List that contains corrections for the failed element(s) from the previous DELTA List, simply correct the error(s) in the original DELTA List, Mark only those elements which require execution, and select the 'Execute Marked elements only' option at DELTA List execution.

                                                                                                                                                                                                                                                                                                                                                      • coord : boolean
                                                                                                                                                                                                                                                                                                                                                    • $class: 'BootPluginBuilder'
                                                                                                                                                                                                                                                                                                                                                      • tasks : String
                                                                                                                                                                                                                                                                                                                                                        Provide a valid boot task, this could be a built in task or a user defined. Try 'boot help' for list of tasks.
                                                                                                                                                                                                                                                                                                                                                      • jvmOpts : String
                                                                                                                                                                                                                                                                                                                                                        Specify JVM Options to be used within boot tasks.
                                                                                                                                                                                                                                                                                                                                                    • $class: 'BranchDestructionStep'
                                                                                                                                                                                                                                                                                                                                                      • project : String
                                                                                                                                                                                                                                                                                                                                                      • branch : String
                                                                                                                                                                                                                                                                                                                                                    • $class: 'BranchGenerationStep'
                                                                                                                                                                                                                                                                                                                                                      • projectConfig
                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                        • pipelineConfig
                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                          • destructor : boolean
                                                                                                                                                                                                                                                                                                                                                          • authorisations : String
                                                                                                                                                                                                                                                                                                                                                          • branchSCMParameter : boolean
                                                                                                                                                                                                                                                                                                                                                          • branchParameters : String
                                                                                                                                                                                                                                                                                                                                                          • generationExtension : String
                                                                                                                                                                                                                                                                                                                                                          • pipelineGenerationExtension : String
                                                                                                                                                                                                                                                                                                                                                          • disableDslScript : boolean
                                                                                                                                                                                                                                                                                                                                                          • scriptDirectory : String
                                                                                                                                                                                                                                                                                                                                                          • namingStrategy
                                                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                                                            • projectFolderPath : String
                                                                                                                                                                                                                                                                                                                                                            • branchFolderPath : String
                                                                                                                                                                                                                                                                                                                                                            • projectSeedName : String
                                                                                                                                                                                                                                                                                                                                                            • projectDestructorName : String
                                                                                                                                                                                                                                                                                                                                                            • branchSeedName : String
                                                                                                                                                                                                                                                                                                                                                            • branchStartName : String
                                                                                                                                                                                                                                                                                                                                                            • branchName : String
                                                                                                                                                                                                                                                                                                                                                            • ignoredBranchPrefixes : String
                                                                                                                                                                                                                                                                                                                                                          • eventStrategy
                                                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                                                            • delete : boolean
                                                                                                                                                                                                                                                                                                                                                            • auto : boolean
                                                                                                                                                                                                                                                                                                                                                            • trigger : boolean
                                                                                                                                                                                                                                                                                                                                                            • commit : String
                                                                                                                                                                                                                                                                                                                                                        • project : String
                                                                                                                                                                                                                                                                                                                                                        • scmType : String
                                                                                                                                                                                                                                                                                                                                                        • scmUrl : String
                                                                                                                                                                                                                                                                                                                                                        • scmCredentials : String
                                                                                                                                                                                                                                                                                                                                                        • triggerIdentifier : String
                                                                                                                                                                                                                                                                                                                                                        • triggerType : String
                                                                                                                                                                                                                                                                                                                                                        • triggerSecret : String
                                                                                                                                                                                                                                                                                                                                                    • dotnetBuild
                                                                                                                                                                                                                                                                                                                                                      The dotnet build command builds the project and its dependencies into a set of binaries. The binaries include the project's code in Intermediate Language (IL) files with a .dll extension. Depending on the project type and settings, other files may be included, such as:
                                                                                                                                                                                                                                                                                                                                                      1. An executable that can be used to run the application, if the project type is an executable targeting .NET Core 3.0 or later.
                                                                                                                                                                                                                                                                                                                                                      2. Symbol files used for debugging, with a .pdb extension.
                                                                                                                                                                                                                                                                                                                                                      3. A .deps.json file, which lists the dependencies of the application or library.
                                                                                                                                                                                                                                                                                                                                                      4. A .runtimeconfig.json file, which specifies the shared runtime and its version for an application.
                                                                                                                                                                                                                                                                                                                                                      5. Other libraries that the project depends on (via project references or NuGet package references).
                                                                                                                                                                                                                                                                                                                                                      • charset : String (optional)
                                                                                                                                                                                                                                                                                                                                                        The character set to use for the step's output. If not specified, the charset associated with the build will be used.
                                                                                                                                                                                                                                                                                                                                                      • configuration : String (optional)
                                                                                                                                                                                                                                                                                                                                                        Defines the build configuration. The default for most projects is Debug, but you can override the build configuration settings in your project.
                                                                                                                                                                                                                                                                                                                                                      • continueOnError : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                        If this is checked, errors encountered will cause the build status to be set to FAILURE (or UNSTABLE, if configured that way), but the build will be allowed to continue. Otherwise, any such errors will cause the build to be terminated immediately.
                                                                                                                                                                                                                                                                                                                                                      • force : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                        Forces all dependencies to be resolved even if the last restore was successful. Specifying this flag is the same as deleting the project.assets.json file.
                                                                                                                                                                                                                                                                                                                                                      • framework : String (optional)
                                                                                                                                                                                                                                                                                                                                                        Compiles for a specific framework. The framework must be defined in the project file.
                                                                                                                                                                                                                                                                                                                                                      • noDependencies : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                        Ignores project-to-project references and only restores the root project.
                                                                                                                                                                                                                                                                                                                                                      • noIncremental : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                        Marks the build as unsafe for incremental build. This flag turns off incremental compilation and forces a clean rebuild of the project's dependency graph.
                                                                                                                                                                                                                                                                                                                                                      • noRestore : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                        Doesn't execute an implicit restore when running the command.
                                                                                                                                                                                                                                                                                                                                                      • nologo : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                        Doesn't display the startup banner or the copyright message.

                                                                                                                                                                                                                                                                                                                                                        Available since: .NET Core SDK 3.0
                                                                                                                                                                                                                                                                                                                                                      • option : String (optional)
                                                                                                                                                                                                                                                                                                                                                      • options : Array / List of String (optional)
                                                                                                                                                                                                                                                                                                                                                        • optionsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                          For more information about these options, see the MSBuild Command-Line Reference.
                                                                                                                                                                                                                                                                                                                                                          If targets and/or properties are also configured, those will be passed after these options.
                                                                                                                                                                                                                                                                                                                                                        • outputDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                          Directory in which to place the built binaries. If not specified, the default path is ./bin/<configuration>/<framework>/. For projects with multiple target frameworks (via the TargetFrameworks property), you also need to specify a specific framework when you specify this option.
                                                                                                                                                                                                                                                                                                                                                        • project : String (optional)
                                                                                                                                                                                                                                                                                                                                                          The MSBuild project or solution to build. If a directory is specified, MSBuild searches it for a (single) file that has a file extension that ends in proj or sln, and uses that file. If nothing is specified, the current working directory is searched in the same way.
                                                                                                                                                                                                                                                                                                                                                        • properties (optional)
                                                                                                                                                                                                                                                                                                                                                          • Type: java.util.Map<java.lang.String, java.lang.String>
                                                                                                                                                                                                                                                                                                                                                        • propertiesString : String (optional)
                                                                                                                                                                                                                                                                                                                                                          Additional MSBuild properties to set. These should be specified one per line, in Java properties syntax.
                                                                                                                                                                                                                                                                                                                                                        • runtime : String (optional)
                                                                                                                                                                                                                                                                                                                                                          Specifies the target runtime. For a list of Runtime Identifiers (RIDs), see the RID catalog.
                                                                                                                                                                                                                                                                                                                                                        • sdk : String (optional)
                                                                                                                                                                                                                                                                                                                                                          Name of a .NET SDK to use so that dotnet will be in the path.
                                                                                                                                                                                                                                                                                                                                                          If the default is specified, you either need to use the With .NET element (or a withDotNet block in a pipeline script) to specify one, or ensure this step runs on a node that has a .NET SDK installed and in the path.
                                                                                                                                                                                                                                                                                                                                                        • showSdkInfo : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                          If enabled, dotnet --info will be executed before the main command. This shows a list of available SDKs and runtimes, indicating which one is currently being used.
                                                                                                                                                                                                                                                                                                                                                        • shutDownBuildServers : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                          If enabled, dotnet build-server shutdown will be executed after the main command, shutting down build servers that may have been started.
                                                                                                                                                                                                                                                                                                                                                          Note: If this is not specified, a build that causes such a build server to be started may hang until those server processes end. As such, it's recommended to specify this for the last .NET-related step in a job. If using multiple SDKs, each needs its own shutdown (e.g. the .NET Core 3.1 SDK will not shut down build servers from the .NET 5.0 SDK).

                                                                                                                                                                                                                                                                                                                                                          Available since: .NET Core SDK 2.1
                                                                                                                                                                                                                                                                                                                                                        • specificSdkVersion : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                          Depending on the platform, the dotnet executable may use the most recent SDK available on the system, even when PATH is set up to find an older SDK deployment first; see this page for more information.
                                                                                                                                                                                                                                                                                                                                                          By enabling this option, the configured SDK home directory will be checked, and if it only includes a single SDK deployment, a global.json file will be created in the current directory, referencing that SDK version and disabling roll-forward.
                                                                                                                                                                                                                                                                                                                                                          Note: This will silently overwrite any global.json already present in the current directory.
                                                                                                                                                                                                                                                                                                                                                        • target : String (optional)
                                                                                                                                                                                                                                                                                                                                                        • targets : Array / List of String (optional)
                                                                                                                                                                                                                                                                                                                                                          • targetsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                            Specifies the MSBuild targets to build. If none are specified, the default target specified in the project will be built.
                                                                                                                                                                                                                                                                                                                                                          • unstableIfErrors : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                            If this is set and the build completes with errors, the build will be marked as unstable instead of failed, and execution will continue to the next step.
                                                                                                                                                                                                                                                                                                                                                          • unstableIfWarnings : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                            If this is set and the build completes with warnings (but no errors), the build will be marked as unstable instead of successful.
                                                                                                                                                                                                                                                                                                                                                          • verbosity : String (optional)
                                                                                                                                                                                                                                                                                                                                                            Sets the MSBuild verbosity level.
                                                                                                                                                                                                                                                                                                                                                          • versionSuffix : String (optional)
                                                                                                                                                                                                                                                                                                                                                            Sets the value of the $(VersionSuffix) property to use when building the project. This only works if the $(Version) property isn't set. Then, $(Version) is set to the $(VersionPrefix) combined with the $(VersionSuffix), separated by a dash.
                                                                                                                                                                                                                                                                                                                                                          • workDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                            The directory in which to execute the command. By default, this is the current directory (for freestyle jobs, that is the root of the job's workspace).
                                                                                                                                                                                                                                                                                                                                                        • buildAddUrl
                                                                                                                                                                                                                                                                                                                                                          • title : String
                                                                                                                                                                                                                                                                                                                                                          • url : String
                                                                                                                                                                                                                                                                                                                                                        • $class: 'BuildBuilder'
                                                                                                                                                                                                                                                                                                                                                          • dbFolder
                                                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                                                            • value
                                                                                                                                                                                                                                                                                                                                                              • Values: vcsroot, subfolder, scaproject
                                                                                                                                                                                                                                                                                                                                                            • subfolder : String
                                                                                                                                                                                                                                                                                                                                                            • projectPath : String
                                                                                                                                                                                                                                                                                                                                                          • packageid : String
                                                                                                                                                                                                                                                                                                                                                            Enter an ID for the build artifact you want to build. Typically, this will be the same as your database name.
                                                                                                                                                                                                                                                                                                                                                          • tempServer
                                                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                                                            • value : String
                                                                                                                                                                                                                                                                                                                                                            • serverName : String
                                                                                                                                                                                                                                                                                                                                                            • dbName : String
                                                                                                                                                                                                                                                                                                                                                            • serverAuth
                                                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                                                              • value : String
                                                                                                                                                                                                                                                                                                                                                              • username : String
                                                                                                                                                                                                                                                                                                                                                              • password
                                                                                                                                                                                                                                                                                                                                                                • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                            • encryptConnection : boolean
                                                                                                                                                                                                                                                                                                                                                            • trustServerCertificate : boolean
                                                                                                                                                                                                                                                                                                                                                          • options : String
                                                                                                                                                                                                                                                                                                                                                          • dataOptions : String
                                                                                                                                                                                                                                                                                                                                                          • transactionIsolationLevel
                                                                                                                                                                                                                                                                                                                                                            • Values: Serializable, Snapshot, RepeatableRead, ReadCommitted, ReadUncommitted
                                                                                                                                                                                                                                                                                                                                                          • filter : String
                                                                                                                                                                                                                                                                                                                                                          • packageVersion : String
                                                                                                                                                                                                                                                                                                                                                            Optionally, set a custom package version. If this is left blank, the version 1.0.${BUILD_NUMBER} will be used.
                                                                                                                                                                                                                                                                                                                                                          • dlmDashboard
                                                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                                                            • dlmDashboardHost : String
                                                                                                                                                                                                                                                                                                                                                            • dlmDashboardPort : String
                                                                                                                                                                                                                                                                                                                                                          • sqlChangeAutomationVersionOption
                                                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                                                            • value
                                                                                                                                                                                                                                                                                                                                                              • Values: Latest, Specific
                                                                                                                                                                                                                                                                                                                                                            • specificVersion : String
                                                                                                                                                                                                                                                                                                                                                        • buildDescription
                                                                                                                                                                                                                                                                                                                                                          Normally, build description is empty, but it can be changed by setting what name new build gets. This field can contain macros.
                                                                                                                                                                                                                                                                                                                                                          • descriptionTemplate : String
                                                                                                                                                                                                                                                                                                                                                        • buildName
                                                                                                                                                                                                                                                                                                                                                          Normally, builds are named by their sequential numbers, but you can change that here by setting what name new build gets. This field can contain macros.
                                                                                                                                                                                                                                                                                                                                                          • nameTemplate : String
                                                                                                                                                                                                                                                                                                                                                        • $class: 'BuildNameUpdater'
                                                                                                                                                                                                                                                                                                                                                          This plugin updates build name and description during the build process. Values to set could be stored in a file in the build workspace or in an environment variable.
                                                                                                                                                                                                                                                                                                                                                          • fromFile : boolean
                                                                                                                                                                                                                                                                                                                                                          • buildName : String
                                                                                                                                                                                                                                                                                                                                                          • fromMacro : boolean
                                                                                                                                                                                                                                                                                                                                                          • macroTemplate : String
                                                                                                                                                                                                                                                                                                                                                          • macroFirst : boolean
                                                                                                                                                                                                                                                                                                                                                        • crxBuild
                                                                                                                                                                                                                                                                                                                                                          Create and build a content package on CRX by specifying a workspace filter, and then download it to the workspace to get archived as a backup, or as the beginning of a magical content package adventure, full of drama, suspense, and deployments to lower environments!
                                                                                                                                                                                                                                                                                                                                                          • packageId : String (optional)
                                                                                                                                                                                                                                                                                                                                                            Specify a list of package IDs to replicate from each specified Base URL. Each package ID string must occupy its own line.

                                                                                                                                                                                                                                                                                                                                                            A Package ID consists of the group, the name, and the version of a package, separated by colons (':'), as in: "group:name:version". The version may be omitted.

                                                                                                                                                                                                                                                                                                                                                            This field supports parameter tokens.
                                                                                                                                                                                                                                                                                                                                                          • baseUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                            Specify the base URL of the Adobe Granite server, including hostname and port. The CRX Package Manager service path will be appended to this value for all requests. For example, http://localhost:4502 or https://author.mycorp.com, etc.

                                                                                                                                                                                                                                                                                                                                                            If login credentials for the server are different than those configured in the Connection Options section, you may override them in the Base URL by inserting username[:password]@ between the scheme and the hostname.

                                                                                                                                                                                                                                                                                                                                                            For example, to override the Username without changing the associated password or private key, you may use the following form:

                                                                                                                                                                                                                                                                                                                                                            http://deployer@localhost:4502

                                                                                                                                                                                                                                                                                                                                                            To override the credentials completely, provide a username and password (which may be provided by an encrypted parameter) by separating them with a colon, as shown below:
                                                                                                                                                                                                                                                                                                                                                            http://deployer:Password123@localhost:4502

                                                                                                                                                                                                                                                                                                                                                            This field supports parameter tokens.
                                                                                                                                                                                                                                                                                                                                                          • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                            Select the login credentials for authenticating requests to the CRX server.

                                                                                                                                                                                                                                                                                                                                                            [Signature] credentials may be used if the target server supports HTTP Signature Authentication using the keyId format, /$username/keys/$fingerprint.

                                                                                                                                                                                                                                                                                                                                                            Select "-none-" to use the default credentials set in the global CRX Content Package Deployer - HTTP Client configuration.
                                                                                                                                                                                                                                                                                                                                                          • download : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                            Check this box to download the package after building it.
                                                                                                                                                                                                                                                                                                                                                          • localDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                            Specify a path relative to the workspace where the package will be downloaded (if the "Download" box is checked).

                                                                                                                                                                                                                                                                                                                                                            This field supports parameter tokens.
                                                                                                                                                                                                                                                                                                                                                          • requestTimeout : long (optional)
                                                                                                                                                                                                                                                                                                                                                            Specify the timeout in milliseconds to wait for a response for each individual request. Specify a value of 0 to use default behavior.
                                                                                                                                                                                                                                                                                                                                                          • serviceTimeout : long (optional)
                                                                                                                                                                                                                                                                                                                                                            Specify the timeout in milliseconds to wait for PackageManager service availability between sending POST requests. Specify a value of 0 to use default behavior.
                                                                                                                                                                                                                                                                                                                                                          • waitDelay : long (optional)
                                                                                                                                                                                                                                                                                                                                                            Specify a delay in milliseconds before calls to check for Package Manager service availability. Increase this value if a /crx/packmgr node is sometimes created in the repository by this step, indicating that the Package Manager servlet was brought down for bundle installation AFTER a successful check for service availability, but BEFORE the next POST request was sent. What happens is that the SlingPostServlet takes over when the crx-packagemgr bundle is refreshed and creates nodes for any POST requests that it handles. Increasing this delay gives more time for the bundle refresh process to begin on the server.
                                                                                                                                                                                                                                                                                                                                                          • wspFilter : String (optional)
                                                                                                                                                                                                                                                                                                                                                            Specify a package workspace filter in a simple text format that will be applied to the package before build. This defines what content will be captured by the package.

                                                                                                                                                                                                                                                                                                                                                            Simple spec is defined simply as a line-by-line format where:
                                                                                                                                                                                                                                                                                                                                                            • each line consists of significant text before an optional comment character (#)
                                                                                                                                                                                                                                                                                                                                                            • each line that begins with a "/" begins a new filter root.
                                                                                                                                                                                                                                                                                                                                                            • the first non-empty, non-comment line must define a new filter root
                                                                                                                                                                                                                                                                                                                                                            • each non-empty, non-comment line after a filter root that begins with a "+" or "-" defines an include or exclude rule, respectively. Everything following the "+" or "-" must be a valid regular expression
                                                                                                                                                                                                                                                                                                                                                            Content is "covered" by a filter root if the content path starts with, or is the same as the filter root path. Once the "covering" filter root is identified, its include/exclude rules are evaluated from top to bottom, by matching the content path against each rule pattern (which is a Java regular expression). The last rule whose pattern matches the content path defines whether that content is included (line starts with "+") or excluded (line starts with "-"). If no rules are defined, all content covered by that root path is included

                                                                                                                                                                                                                                                                                                                                                            For example, to include everything under /etc except for packages:

                                                                                                                                                                                                                                                                                                                                                                    /etc                 # define /etc as the filter root
                                                                                                                                                                                                                                                                                                                                                                    +/etc(/.*)?          # include everything under /etc
                                                                                                                                                                                                                                                                                                                                                                    -/etc/packages(/.)?  # exclude package paths
                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                            To create a package for a project "acme" defined in CRX DE Lite, a filter may look like this:

                                                                                                                                                                                                                                                                                                                                                                    /content/acme        # include the site content
                                                                                                                                                                                                                                                                                                                                                                    /apps/acme           # include the app code
                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                            This field supports parameter tokens.
                                                                                                                                                                                                                                                                                                                                                        • $class: 'BuildScanner'
                                                                                                                                                                                                                                                                                                                                                          Trigger automated Acunetix scans as part of your web application's build process
                                                                                                                                                                                                                                                                                                                                                          • profile : String
                                                                                                                                                                                                                                                                                                                                                            The Scan Type used to scan the target
                                                                                                                                                                                                                                                                                                                                                          • target : String
                                                                                                                                                                                                                                                                                                                                                            The Scan Target on which to run a scan (excludes Targets requiring Manual Intervention)
                                                                                                                                                                                                                                                                                                                                                          • repTemp : String
                                                                                                                                                                                                                                                                                                                                                            Generate a Report after the scan completes. The report is available for download from Acunetix backend within a time frame of one hour
                                                                                                                                                                                                                                                                                                                                                          • threat : String
                                                                                                                                                                                                                                                                                                                                                            The Threat Level (High, Medium, Low) to fail the build on
                                                                                                                                                                                                                                                                                                                                                          • stopScan : boolean
                                                                                                                                                                                                                                                                                                                                                            If selected, the scan will be stopped if the build fails (Threat Level is reached)
                                                                                                                                                                                                                                                                                                                                                          • svRep : boolean
                                                                                                                                                                                                                                                                                                                                                            Option to download the report in the project workspace from where it can be used for other operations like attaching to an email or archiving.
                                                                                                                                                                                                                                                                                                                                                            Note: Archiving can be done with "Archive the artifacts" post-build action
                                                                                                                                                                                                                                                                                                                                                          • incScan : boolean
                                                                                                                                                                                                                                                                                                                                                            This will create an Incremental scan. The first scan will scan all the site. Subsequent scans will only scan the changes in the site, resulting in smaller scans.
                                                                                                                                                                                                                                                                                                                                                          • incScanId : String
                                                                                                                                                                                                                                                                                                                                                          • stopTargetScans : boolean
                                                                                                                                                                                                                                                                                                                                                            This is useful when older versions of the web application are discarded by the CI/CD when an updated version is created.
                                                                                                                                                                                                                                                                                                                                                        • $class: 'BuildStepBuilder'
                                                                                                                                                                                                                                                                                                                                                          • sourceFolderMode : String
                                                                                                                                                                                                                                                                                                                                                          • subfolder : String
                                                                                                                                                                                                                                                                                                                                                          • packageId : String
                                                                                                                                                                                                                                                                                                                                                          • serverType : String
                                                                                                                                                                                                                                                                                                                                                          • server : String
                                                                                                                                                                                                                                                                                                                                                          • authenticationType : String
                                                                                                                                                                                                                                                                                                                                                          • userName : String
                                                                                                                                                                                                                                                                                                                                                          • password
                                                                                                                                                                                                                                                                                                                                                            • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                          • database : String
                                                                                                                                                                                                                                                                                                                                                          • compareOptions : String (optional)
                                                                                                                                                                                                                                                                                                                                                          • filterFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                          • transactionIsoLvl : String (optional)
                                                                                                                                                                                                                                                                                                                                                        • $class: 'BuildStepWithTimeout'
                                                                                                                                                                                                                                                                                                                                                          • buildStep : Build Step (hudson.tasks.BuildStep)
                                                                                                                                                                                                                                                                                                                                                          • strategy
                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                            • $class: 'AbsoluteTimeOutStrategy'

                                                                                                                                                                                                                                                                                                                                                              Terminate a build based on a fixed time-out period.

                                                                                                                                                                                                                                                                                                                                                              • timeoutMinutes : String
                                                                                                                                                                                                                                                                                                                                                                If configured, and if a build does not complete by the specified amount of time (in minutes; at least 3), then the build will be terminated automatically. This is useful if you have experienced infinite loops in your test, for example.
                                                                                                                                                                                                                                                                                                                                                            • $class: 'DeadlineTimeOutStrategy'

                                                                                                                                                                                                                                                                                                                                                              Terminate a build based on a deadline time specified in HH:MM:SS or HH:MM (24-hour time format).

                                                                                                                                                                                                                                                                                                                                                              • deadlineTime : String
                                                                                                                                                                                                                                                                                                                                                                If configured, and if a build does not complete by next deadline time (specified in 24-hour format as HH:MM:SS or HH:MM), then the build will be terminated automatically.
                                                                                                                                                                                                                                                                                                                                                                Variable references are allowed to define deadline time.
                                                                                                                                                                                                                                                                                                                                                              • deadlineToleranceInMinutes : int
                                                                                                                                                                                                                                                                                                                                                                Period in minutes after the deadline time when a build should be immediately terminated. E.g. if deadline is defined as "13:50", tolerance as "5" minutes and build is scheduled to run at "13:52" it will be immediately terminated. However if it is scheduled at "13:56", build's deadline will be set at "13:50" of next day.
                                                                                                                                                                                                                                                                                                                                                            • $class: 'ElasticTimeOutStrategy'

                                                                                                                                                                                                                                                                                                                                                              Terminate a build based on a specified percentage of the mean of the duration of the n most recent non-failing builds.

                                                                                                                                                                                                                                                                                                                                                              • timeoutPercentage : String
                                                                                                                                                                                                                                                                                                                                                                If a build takes longer than this percentage of the n most recent non-failing builds, the build will be terminated. If there are no such builds, the "Timeout minutes" field will be used instead.
                                                                                                                                                                                                                                                                                                                                                              • timeoutMinutesElasticDefault : String
                                                                                                                                                                                                                                                                                                                                                              • numberOfBuilds : String
                                                                                                                                                                                                                                                                                                                                                              • failSafeTimeoutDuration : boolean
                                                                                                                                                                                                                                                                                                                                                            • $class: 'LikelyStuckTimeOutStrategy'

                                                                                                                                                                                                                                                                                                                                                              Terminate a build when it has taken many times longer than previous ones.

                                                                                                                                                                                                                                                                                                                                                              • $class: 'NoActivityTimeOutStrategy'
                                                                                                                                                                                                                                                                                                                                                                Terminate a build when there has not been any log output since the last n seconds.
                                                                                                                                                                                                                                                                                                                                                                • timeoutSecondsString : String
                                                                                                                                                                                                                                                                                                                                                                  Seconds to detect timeout since the last log output. This is useful to terminate a build if there has not been any activity for a long time. Be careful with log output delay for buffering.
                                                                                                                                                                                                                                                                                                                                                              • $class: 'RunConditionTimeoutStrategy'
                                                                                                                                                                                                                                                                                                                                                                Sets a conditional timeout. The strategy will take a timeout from a first matching condition. The default value will be used if all evaluations fail or return false.

                                                                                                                                                                                                                                                                                                                                                                This extension uses run condition as condition sources.

                                                                                                                                                                                                                                                                                                                                                                • conditions
                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                  • condition
                                                                                                                                                                                                                                                                                                                                                                    A Run Condition to be evaluated.
                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                    • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                      • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                        • conditions
                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                          • condition
                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                            • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                              • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                              • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                • command : String
                                                                                                                                                                                                                                                                                                                                                                                  The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                  If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                              • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                • token : String
                                                                                                                                                                                                                                                                                                                                                                              • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                  The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                  • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                  • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                  • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                  • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                  • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                  • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                  The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                  • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                  • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                  • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                  • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                  • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                  There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                              • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                  Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                  For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                • daySelector
                                                                                                                                                                                                                                                                                                                                                                                  For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                  Weekends
                                                                                                                                                                                                                                                                                                                                                                                  Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                  Weekdays
                                                                                                                                                                                                                                                                                                                                                                                  Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                  Select days
                                                                                                                                                                                                                                                                                                                                                                                  Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                    • days
                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                      • day : int
                                                                                                                                                                                                                                                                                                                                                                                      • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                    • expression : String
                                                                                                                                                                                                                                                                                                                                                                                      The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                    • label : String
                                                                                                                                                                                                                                                                                                                                                                                      The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                    • condition
                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                        • projects : String
                                                                                                                                                                                                                                                                                                                                                                                          Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                        • users : String
                                                                                                                                                                                                                                                                                                                                                                                          Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                    • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                      There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                    • file : String
                                                                                                                                                                                                                                                                                                                                                                                    • baseDir
                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                          • includes : String
                                                                                                                                                                                                                                                                                                                                                                                          • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                          • baseDir
                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                  • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                    • condition
                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                          • command : String
                                                                                                                                                                                                                                                                                                                                                                                                            The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                            If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                          • token : String
                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                          Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                          • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                            The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                            • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                            • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                            • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                            • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                            • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                            • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                            The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                            • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                            • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                            • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                            • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                            • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                          • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                            There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                          • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                            Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                            For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                          • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                            For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                            Weekends
                                                                                                                                                                                                                                                                                                                                                                                                            Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                            Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                            Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                            Select days
                                                                                                                                                                                                                                                                                                                                                                                                            Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                              • days
                                                                                                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                              • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                              • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                              • condition
                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                  • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                    Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                  • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                    Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                              • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                              • file : String
                                                                                                                                                                                                                                                                                                                                                                                                              • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                    • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                    • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                    • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                          • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                          • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                            • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                              • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                              • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                              • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                          • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                            • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                            • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                            • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                          • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                            If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                          • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                            Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                            For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                    ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                          • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                            You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                            For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                    BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                    BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                

                                                                                                                                                                                                                                                                                                                                                                                                                                            would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                    ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                

                                                                                                                                                                                                                                                                                                                                                                                                                                            In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                            • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                            • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                            • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                            • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                          • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                            If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                          • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                          • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                            Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                            By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                            As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                            A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                          • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                            The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                          • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                            The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                          • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                          • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                          • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                            Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                          • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                          • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                          • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                          • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                          • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                          • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                            Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                            For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                          • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                            Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                      • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                      • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                      • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                    • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                    • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                    • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                    If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                    Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                    For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                            ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                    You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                    For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                            BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                            BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                        

                                                                                                                                                                                                                                                                                                                                                                                                                                                    would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                            ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                        

                                                                                                                                                                                                                                                                                                                                                                                                                                                    In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                    • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                    • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                    • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                    • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                    If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                    Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                    By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                    As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                    A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                    The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                    The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                    Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                    Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                    For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                    Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                            • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                              The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                              If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                            • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                            Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                              The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                              • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                              • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                              • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                              • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                              • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                              • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                              The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                              • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                              • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                              • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                              • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                              • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                            • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                              There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                            • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                              Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                              For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                            • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                              For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                              Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                              Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                              Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                              Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                              Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                              Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                  The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                  The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                    • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                      Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                    • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                      Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                  There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                      • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                      • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                      • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                            • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                            • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                              • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • timeout : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Timeout in minutes, which will be set if the condition above returns true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • defaultTimeout : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  A default timeout in minutes. This value will be used if all condition evaluations fail or return false.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • operationList
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'AbortAndRestartOperation'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • maxRestarts : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Count of maximum restarts. 0 means without a limit.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'AbortOperation'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Abort the build. This is a default operation performed if no operations are specified.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'BuildStepOperation'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Perform a build step or a post-build action as a timeout action.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This never ensure all build steps and post-build actions works correct.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • buildstep : Build Step (hudson.tasks.BuildStep)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • continueEvenFailed : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Continue subsequent timeout actions even when the build step failed. If unchecked, subsequent timeout actions is not executed, and the build will be marked as failure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • createLauncher : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Build steps like "Execute shell", "Execute Windows batch command" and so on, requires Launcher object to execute an external program. Build Timeout does not provide Launcher for build steps by default and those build steps fail. Checking here provides the build step a new created Launcher. You should not check here as long as the build step can run without this (that is, it does not require an external program).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'FailOperation'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The build will be marked as failed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'WriteDescriptionOperation'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Writing the build description.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • description : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      A description to set. {0} will be replaced with timeout minutes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'BuildStepsFromJsonBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'BuildoutBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • pythonName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • buildoutCfg : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • nature : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ignoreExitCode : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • byteguardGreet
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • task_id : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'CFLaunchBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • cfComposition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • setCFVars
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • vars
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Variable : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'CIMessageBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • providerData (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • activeMQPublisher
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failOnError : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Whether you want to fail the build if there is an error sending a message. By default, it is false.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • messageContent : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Content of CI message to be sent. Environment variable values may be used in the content to allow customization of the message. Environment variables should use the familiar bash shell format, e.g. ${VARIABLE}.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • messageProperties : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      KEY=value pairs, one per line (Java properties file format) to be used as message properties. Backslashes are used for escaping, so use "\\" for a single backslash. Current build parameters and/or environment variables can be used in form: ${PARAM}.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • messageType (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Type of CI message to be sent.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Values: CodeQualityChecksDone, ComponentBuildDone, Custom, EarlyPerformanceTestingDone, EarlySecurityTestingDone, ImageUploaded, FunctionalTestCoverageDone, FunctionalTestingDone, NonfunctionalTestingDone, OotbTestingDone, PeerReviewDone, ProductAcceptedForReleaseTesting, ProductBuildDone, ProductBuildInStaging, ProductTestCoverageDone, PullRequest, SecurityChecksDone, TestingStarted, TestingCompleted, Tier0TestingDone, Tier1TestingDone, Tier2IntegrationTestingDone, Tier2ValidationTestingDone, Tier3TestingDone, UnitTestCoverageDone, UpdateDefectStatus
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • overrides (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • topic : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • queue : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • activeMQSubscriber
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • checks (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • field : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • expectedValue : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • overrides (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • topic : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • queue : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • selector : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      JMS selector to choose messages that will fire the trigger.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : int (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Value (in minutes) to wait for a message matching the specified JMS selector.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • variable : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Environment variable to hold received message content.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fedmsgPublisher
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failOnError : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Whether you want to fail the build if there is an error sending a message. By default, it is false.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • messageContent : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Content of CI message to be sent at job completion. Environment variable values may be used in the content to allow customization of the message. Environment variables should use the familiar bash shell format, e.g. ${VARIABLE}.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • overrides (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • topic : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • queue : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fedmsgSubscriber
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • checks (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • field : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • expectedValue : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • overrides (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • topic : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • queue : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : int (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Value (in minutes) to wait for a message matching the specified JMS selector.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • variable : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Environment variable to hold received message content.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • rabbitMQPublisher
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failOnError : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Whether you want to fail the build if there is an error sending a message. By default, it is false.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fedoraMessaging : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • messageContent : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Content of CI message to be sent. Environment variable values may be used in the content to allow customization of the message. Environment variables should use the familiar bash shell format, e.g. ${VARIABLE}.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • overrides (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • topic : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • queue : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • schema : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Path to message schema.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • severity : int (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Severity of the message.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • rabbitMQSubscriber
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • checks (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • field : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • expectedValue : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • overrides (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • topic : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • queue : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : int (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Value (in minutes) to wait for a message.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • variable : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Environment variable to hold received message content.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'CIMessageSubscriberBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Subscribe to the CI message bus and wait for a message matching the specified JMS selector.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The variable value specifies the name of an environment variable in which to place the received message body.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The timeout value specifies the maximum number of minutes to wait for a message matching the JMS selector to appear.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • providerData (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • activeMQPublisher
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failOnError : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Whether you want to fail the build if there is an error sending a message. By default, it is false.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • messageContent : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Content of CI message to be sent. Environment variable values may be used in the content to allow customization of the message. Environment variables should use the familiar bash shell format, e.g. ${VARIABLE}.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • messageProperties : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      KEY=value pairs, one per line (Java properties file format) to be used as message properties. Backslashes are used for escaping, so use "\\" for a single backslash. Current build parameters and/or environment variables can be used in form: ${PARAM}.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • messageType (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Type of CI message to be sent.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Values: CodeQualityChecksDone, ComponentBuildDone, Custom, EarlyPerformanceTestingDone, EarlySecurityTestingDone, ImageUploaded, FunctionalTestCoverageDone, FunctionalTestingDone, NonfunctionalTestingDone, OotbTestingDone, PeerReviewDone, ProductAcceptedForReleaseTesting, ProductBuildDone, ProductBuildInStaging, ProductTestCoverageDone, PullRequest, SecurityChecksDone, TestingStarted, TestingCompleted, Tier0TestingDone, Tier1TestingDone, Tier2IntegrationTestingDone, Tier2ValidationTestingDone, Tier3TestingDone, UnitTestCoverageDone, UpdateDefectStatus
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • overrides (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • topic : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • queue : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • activeMQSubscriber
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • checks (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • field : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • expectedValue : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • overrides (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • topic : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • queue : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • selector : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      JMS selector to choose messages that will fire the trigger.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : int (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Value (in minutes) to wait for a message matching the specified JMS selector.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • variable : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Environment variable to hold received message content.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fedmsgPublisher
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failOnError : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Whether you want to fail the build if there is an error sending a message. By default, it is false.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • messageContent : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Content of CI message to be sent at job completion. Environment variable values may be used in the content to allow customization of the message. Environment variables should use the familiar bash shell format, e.g. ${VARIABLE}.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • overrides (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • topic : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • queue : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fedmsgSubscriber
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • checks (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • field : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • expectedValue : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • overrides (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • topic : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • queue : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : int (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Value (in minutes) to wait for a message matching the specified JMS selector.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • variable : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Environment variable to hold received message content.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • rabbitMQPublisher
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failOnError : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Whether you want to fail the build if there is an error sending a message. By default, it is false.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fedoraMessaging : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • messageContent : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Content of CI message to be sent. Environment variable values may be used in the content to allow customization of the message. Environment variables should use the familiar bash shell format, e.g. ${VARIABLE}.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • overrides (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • topic : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • queue : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • schema : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Path to message schema.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • severity : int (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Severity of the message.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • rabbitMQSubscriber
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • checks (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • field : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • expectedValue : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • overrides (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • topic : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • queue : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : int (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Value (in minutes) to wait for a message.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • variable : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Environment variable to hold received message content.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'CRDABuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • file : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • crdaKeyId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • cliVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  You must provide the CRDA cli version for the analysis. To see all versions click on CRDA CLI . Check the Readme for the compatible versions with the plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • consentTelemetry : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  CRDA CLI is constantly improving and we would like to know more about usage. Click here to find more details.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • execMan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • requestType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • altCTMConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Optional alternative Continuous Testing Manager configuration. If provided, these parameters override those specified in Jenkins global configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • credentials : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • execParams (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Optional execution request parameters. Both a key and value must be specified. The value can refer to Jenkins environment variables using this syntax - ${JENKINS_ENV_VAR}. For example - ${BUILD_ID}.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • list (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • key : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • postExecute (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Optional post execution action. To perform any post action, provide action name along with the need parameters.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • action : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • params : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • request (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Select this to run a pre-defined Suite configured on the Continuous Testing Manager.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • waitConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Optional execution request wait configuration. Both the polling interval and maximum run time must be specified in seconds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • pollInterval : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • maxRunTime : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'CToolBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Executes a tool of the CMake-suite with arbitrary command-line arguments.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Useful to run cmake in script mode (cmake -P <script file>) or command mode (cmake -E <command>).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • installationName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • arguments : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ignoredExitCodes : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • toolId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • workingDir : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • generateCache
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Generate ECU-TEST file caches (A2L, ELF, Bus, Model and Service caches are supported).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • caches
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • type
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Values: A2L, ELF, BUS, MODEL, SERVICE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • dbChannel : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • clear : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'CallFunction'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Call a function You can choose:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Function name
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Function Arguments
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • functionName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • argumentList : Array / List of String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • argument : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'CallOtherJenkinsBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • hostName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • jobName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • span : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • retry : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • userName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • password : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • parameters : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'CaptureIOSDeviceScreenshot'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Captures a screen shot from each connected iOS device. The image will be stored in a TIFF file matching the device's UDID (e.g. 3c701dda15e238cf3f2831346067751a5c942297.tiff).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • cloudTestServerID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Select the server to download iOSAppInstaller.zip from.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • additionalOptions : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If you need to pass any other command line options to the iOSAppInstaller utility, specify them here. You can separate options with new lines as well as whitespaces.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • carbonetes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • engineTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • failBuildOnPluginError : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • failBuildOnPolicyEvaluationFailResult : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • image : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • policyBundleID : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • registryURI : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • carl
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • installationName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • sourcePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • applicationName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • archivePdf : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • displayLog : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • logPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • outputPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • qualityGate : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • venafiVcertRequestCertificate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • connectorName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • zoneConfigName : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The name of the zone configuration to use.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    When using Venafi as a Service, zone names are in the format of app name\api alias

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • commonName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • privKeyOutput : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • certOutput : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • certChainOutput : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • country : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • dnsNames (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • hostName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • emailAddresses (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • address : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • expirationWindow : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Number of hours before certificate expiry to request a new certificate.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ipAddresses (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • address : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • keyType (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Values: RSA, ECDSA
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • locality : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • organization : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • organizationalUnit : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • province : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • changeAsmVer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This build step can be used to change the version in the AssemblyInfo.cs file from a .NET Project, it's going to find every AssemblyInfo.cs file in the workspace and change the version from [AssemblyVersion] and [AssemblyFileVersion] attributes. It's recommended to use this plugin with the auto-generated AssemblyInfo.cs from VisualStudio.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • versionPattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • assemblyCompany : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • assemblyCopyright : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • assemblyCulture : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • assemblyDescription : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • assemblyFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Set the file name to search. If the value is empty the default filename is : **/AssemblyInfo.cs. You can use an ant fileset pattern.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • assemblyProduct : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • assemblyTitle : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • assemblyTrademark : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • regexPattern : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Regex Pattern in which version is stated. Specify this value if you want to use for versioning other than assembly files (e.g. visual studio extensions .vsix). For assembly (.dll) versioning you do not need to specify anything here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • replacementPattern : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Version value specified in regexPattern will be replaced by this. Use if you want versioning other than assembly files. e.g. "Version(\"%s\")" where %s will be new version number. For assembly (.dll) versioning keep this field blank.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ChangeEventBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Create Change Events on PagerDuty services as Jenkins build steps.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • integrationKey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This is the 32 character Integration Key for an Integration on a Service.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • summaryText : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This is an alternate summary text, that can be passed onto Pager duty change events. If omitted it will default to current build's fullDisplayName.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • chatterPost
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Simple step for posting a Chatter buildUrlTitle/body to a specified channel or the user's wall.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Usage Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  postToChatter "Build Started - ${env.JOB_NAME} ${env.BUILD_NUMBER} (<${env.BUILD_URL}|Open>)"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Utilizes the Credentials Plugin's Username with Password credentials storage to communicate with Chatter.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If you're connecting from outside of your organizations trusted network, you'll also need to append your API security token to your password.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    See Identity Confirmation in the salesforce.com online help for more information.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • body : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The body text for your Chatter post
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • buildUrlTitle : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The buildUrlTitle for your Chatter post. If left blank, the title will be set to your job/pipeline name and number (JOB_NAME BUILD_DISPLAY_NAME)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • recordId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Id of record to chatter to (e.g. a group, or a custom object), leave blank to chatter to user's wall.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • server : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If left blank will connect to production, if you want to connect to a sandbox or have the my domains feature enabled, enter URL of alternative login server, e.g. https://test.salesforce.com
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'CheckGate'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • pipelineId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • stageName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • versionId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fatal : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'CheckGateBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • project : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Select project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • gate : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • checkmarxASTScanner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • useOwnServerCredentials : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • serverUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The base URL of your CxAST environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • useAuthenticationUrl : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The base URL of your Checkmarx authentication server (IAM). Required for CxAST cloud platform.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • baseAuthUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • tenantName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • projectName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The name of your Project in CxAST. If you enter the name of an existing Project, then this build step will trigger a scan of that Project. If you enter a new Project name, then, when a scan is triggered it will create a new Project in CxAST with the specified name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Create "Checkmarx Client Id and Client Secret" type credentials in Jenkins and enter your oAuth2 clientId and secret. This will be used to authenticate access to the CxAST platform whenever a scan is triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • useOwnAdditionalOptions : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • additionalOptions : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    You can customize your scan by adding additional arguments. The Jenkins plugin supports all CxAST CLI arguments. See documentation here
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    e.g- --sast-incremental true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • branchName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • checkmarxInstallation : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Select the Checkmarx CLI installation in Jenkins that will be used for triggering scans. This should have been configured in the Jenkins Global Tool Configuration section.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • chlAtuoAction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • content : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • browserString : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • runScriptOnly : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • rootPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • libPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ChrootBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • chrootName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ignoreExit : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The build will always succeed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • additionalPackages : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Additional packages to install into the chroot environment by 'apt-get'. These packages are persisted in the tarball to speed up subsequent builds. If you don't want this bahaviour use the 'Clear' option.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • packagesFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Enter a list of comma separated relative paths to files in the workspace, which contain additionals packages for apt-get to install. Such files might be placed in a git repository wich is previously checked out.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • clear : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Uses a fresh copied chroot tarball without packages installed from previous runs. The build will take longer but the build results will be more meaningful.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • loginAsRoot : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    When this box is unchecked the subsequent commands are run inside chroot as a user with the same uid and gid as jenkins does. Whenever possible leave this box unchecked, but e. g. for testing installations it might be important to be root.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • noUpdate : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    When this option is enabled, the repository indices are only updated if extra packages are going to be installed. When disabling repository updates, self contained builds, which do not have to install packages, will run faster. Because packages can also be installed from commands within the buildstep, by default, the package indices are always updated.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • forceInstall : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This option allows to force the installation of the specified packages. The underlying container will do whatever it can do to fulfill this request. This allows actions like downgrading, installing untrusted packages, etc.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'CifsBuilderPlugin'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • publishers
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • configName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • verbose : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • transfers
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sourceFiles : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • remoteDirectory : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • removePrefix : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • remoteDirectorySDF : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • flatten : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • cleanRemote : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • noDefaultExcludes : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • makeEmptyDirs : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • patternSeparator : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • useWorkspaceInPromotion : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • usePromotionTimestamp : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • retry
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • retries : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • retryDelay : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • label
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • continueOnError : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • failOnError : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • alwaysPublishFromMaster : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • masterNodeName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • paramPublish
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • parameterName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ClangScanBuildBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Use this option to execute clang scan-build against and XCode project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • target : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Provide the exact name of the XCode target you wish to have compiled and analyzed. You can use targets for all versions of XCode. This field is not required if you are using XCode and providing workspace and scheme.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • targetSdk : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This should be set the simulator version of a currently installed SDK. For later versions of XCode, you can set this value to 'iphonesimulator' to automatically use the latest available version of the SDK. If this does not work, you can identify a specific version by issuing the following command in Terminal:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    xcodebuild -showsdks

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    It should typically look like 'iphonesimulator4.2' where the version number may change depending on your XCode installation.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • config : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Provide the XCode config you wish to execute scan-build against. It is recommended that you always use 'Debug' because this will allow clang to use assertions to eliminate false positives.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • clangInstallationName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • xcodeProjectSubPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If your XCode project is located in a sub-folder of this job's workspace, provide the path here relative to the workspace. e.g. myProj/subfolder
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • workspace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    In XCode 4 and later, you are able to configure named workspaces which are basically containers for multiple XCode projects. If your build requires a workspace, please provide its name in this field. When you provide a workspace you are XCode requires that you also provide a scheme.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • scheme : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If you are leveraging XCode workspaces and schemes, provide the name of your scheme here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • scanbuildargs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This field can be used to pass additional arguments to clang scan-build. The arguments will appear before the xcodebuild sub command. You can view the assembled command by viewing the job's build console.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    scan-build uses the 'clang' executable relative to itself for static analysis by default.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    --use-analyzer Xcode using the 'clang' packaged with Xcode (on OS X)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    --use-analyzer [path to clang] to use the 'clang' from 'path to clang' or $PATH if no path specified.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • xcodebuildargs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This field can be used to pass additional arguments to clang scan-build. The arguments will appear after the xcodebuild sub command. You can view the assembled command by viewing the job's build console.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    -derivedDataPath $WORKSPACE/build is to save build products and other derived data to build directory under current workspace
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • outputFolderName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • googleStorageUpload
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • bucket : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • pattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • pathPrefix : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • sharedPublicly : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • showInline : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • dotnetClean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The dotnet clean command cleans the output of the previous build. It's implemented as an MSBuild target, so the project is evaluated when the command is run. Only the outputs created during the build are cleaned. Both intermediate (obj) and final output (bin) folders are cleaned.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • charset : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The character set to use for the step's output. If not specified, the charset associated with the build will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • configuration : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Defines the build configuration. The default for most projects is Debug, but you can override the build configuration settings in your project. This option is only required when cleaning if you specified it during build time.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • continueOnError : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If this is checked, errors encountered will cause the build status to be set to FAILURE (or UNSTABLE, if configured that way), but the build will be allowed to continue. Otherwise, any such errors will cause the build to be terminated immediately.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • framework : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The framework that was specified at build time. The framework must be defined in the project file. If you specified the framework at build time, you must specify the framework when cleaning.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • nologo : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Doesn't display the startup banner or the copyright message.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Available since: .NET Core SDK 3.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • option : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • options : Array / List of String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • optionsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For more information about these options, see the MSBuild Command-Line Reference.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If targets and/or properties are also configured, those will be passed after these options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • outputDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The directory that contains the build artifacts to clean. If you specified the framework when the project was built, that same framework should also be specified for this cleanup action.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • project : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The MSBuild project or solution to clean. If a directory is specified, MSBuild searches it for a (single) file that has a file extension that ends in proj or sln, and uses that file. If nothing is specified, the current working directory is searched in the same way.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • properties (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Type: java.util.Map<java.lang.String, java.lang.String>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • propertiesString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Additional MSBuild properties to set. These should be specified one per line, in Java properties syntax.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • runtime : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Cleans the output folder of the specified runtime. This is used when a self-contained deployment was created.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • sdk : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Name of a .NET SDK to use so that dotnet will be in the path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If the default is specified, you either need to use the With .NET element (or a withDotNet block in a pipeline script) to specify one, or ensure this step runs on a node that has a .NET SDK installed and in the path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • showSdkInfo : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If enabled, dotnet --info will be executed before the main command. This shows a list of available SDKs and runtimes, indicating which one is currently being used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • shutDownBuildServers : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If enabled, dotnet build-server shutdown will be executed after the main command, shutting down build servers that may have been started.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Note: If this is not specified, a build that causes such a build server to be started may hang until those server processes end. As such, it's recommended to specify this for the last .NET-related step in a job. If using multiple SDKs, each needs its own shutdown (e.g. the .NET Core 3.1 SDK will not shut down build servers from the .NET 5.0 SDK).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Available since: .NET Core SDK 2.1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • specificSdkVersion : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Depending on the platform, the dotnet executable may use the most recent SDK available on the system, even when PATH is set up to find an older SDK deployment first; see this page for more information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      By enabling this option, the configured SDK home directory will be checked, and if it only includes a single SDK deployment, a global.json file will be created in the current directory, referencing that SDK version and disabling roll-forward.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Note: This will silently overwrite any global.json already present in the current directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • unstableIfErrors : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If this is set and the build completes with errors, the build will be marked as unstable instead of failed, and execution will continue to the next step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • unstableIfWarnings : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If this is set and the build completes with warnings (but no errors), the build will be marked as unstable instead of successful.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • verbosity : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Sets the MSBuild verbosity level.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • workDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The directory in which to execute the command. By default, this is the current directory (for freestyle jobs, that is the root of the job's workspace).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • cleanPerformanceMeasurement
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cleanMeasurement : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cleanRCA : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cleanRTS : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • examCleanTarget
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • validNetwork
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • username : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • password : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • filepath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ClifBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • clifName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • clifOpts : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testPlanFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • reportDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'CloudBuildBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This build step invokes Google Cloud Build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • input
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • request
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • file
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • filename : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The path to the YAML build request file to pass to Google Cloud Build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • inline
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • request : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The YAML Build Request to pass to Google Cloud Build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • source (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • local
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • path : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The source to use in the build request. This may be either:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • A path to a file within the workspace. The file must be a compressed gzipped tarball (.tgz or .tar.gz) or zip file (.zip), or
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • A path to a directory within the workspace. The contents of the directory will be archived as a gzipped tarball (.tgz) and uploaded to a temporary Cloud Storage bucket.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • repo
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • branch : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • commit : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projectId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              ID of the project that owns the repo. If omitted, the project ID requesting the build is assumed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • repoName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the repo. If omitted, the name "default" is assumed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • tag : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • storage
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • bucket : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • object : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • substitutionList (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • items
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            User-defined substitutions to be added to the build request. The set of user-defined substitutions referenced in the build request must exactly match the set of substitutions defined here. For details, see Build Requests - User-defined substitutions.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • key : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The name of the user-defined substitution. This must begin with an underscore (_) and use only numbers, uppercase letters, and underscores (respecting the regular expression _[A-Z0-9_]+). The key may not be longer than 100 characters. For details, see Build Requests - User-defined substitutions.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The value of the user-defined substitution. This must not expand to longer than 100 characters. For details, see Build Requests - User-defined substitutions.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • substitutions (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Type: java.util.Map<java.lang.String, java.lang.String>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pushToCloudFoundry
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • target : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • organization : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • cloudSpace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • manifestChoice (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • appName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • appPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • buildpack : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • command : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • domain : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • envVars (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • key : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • hostname : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • instances : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • manifestFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • memory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • noRoute : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • servicesNames (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • stack : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • pluginTimeout : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • selfSigned : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • servicesToCreate (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • type : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • plan : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • resetService : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cloudhubDeployer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • environmentId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • orgId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • appName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The application name identifies your application not only in Runtime Manager but also in the public cloudhub.io domain. For example, an application named myapplication is accessible at http://myapplication.cloudhub.io. To avoid domain conflicts, the application name must be globally unique across CloudHub.The application name can contain between 3 and 42 alphanumeric characters (a-z, A-Z, 0-9) and dashes (-). They cannot contain spaces or other characters.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • muleVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The runtime version must be the same Mule version used to develop your application.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Workspace-relative path of the artifact file to upload (it should resolve to a single file). Can use wildcards like module/dist/**/*.jar, See the @includes of Ant fileset for the exact format. Examples: File, like target/my-mule-app.jar or target/**/*.jar : The jar file will be uploaded to cloudhub.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Jenkins credentials containing The Anypoint Platform account username and password with sufficient access to perform deployment related activities on CloudHub.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • requestMode (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Type of Operation to perform on CloudHub. CREATE - Deploy/Create new application UPDATE - Update application with new package and settings provided. UPDATE_FILE - Update just the zip/jar file of application, rest all settings ignored. CREATE_OR_UPDATE - Deploy/Create new application(if not already present) or update the existing application. RESTART - Restart the application already present. DELETE - Delete the application.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Values: CREATE, UPDATE, CREATE_OR_UPDATE, UPDATE_FILE, RESTART, DELETE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • region : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If you have global deployment enabled on your account, you can change the deployment region.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • autoScalePolicy (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • autoScalePolicyName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The auto scaling policy name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • enableAutoScalePolicy : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • id : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • maxScale : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The maximum number of workers or size of workers for auto scaling. Allowed Values: 0.1, 0.2, 1, 2, 3, 4, 5, 6, 7, 8, 16
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • minScale : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The minimum number of workers or size of workers for auto scaling. Allowed values: 0.1, 0.2, 1, 2, 3, 4, 5, 6, 7, 8, 16
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scaleBasedOn : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The metric based on which auto scaling policy scales. Allowed values: CPU, MEMORY
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scaleDown (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Type: class org.jenkinsci.plugins.cloudhubdeployer.data.Scale
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scaleDownNextScaleWaitMins : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Number of minutes to wait before applying new scale down policy.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scaleDownPeriodCount : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The time in minutes to monitor the CPU/memory for low usage before scaling down.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scaleDownValue : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The CPU or memory usage below which scale down policy will take effect.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scaleType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The scale type of the auto scaling policy. Allowed values: WORKER_COUNT, WORKER_SIZE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scaleUp (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Type: class org.jenkinsci.plugins.cloudhubdeployer.data.Scale
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scaleUpNextScaleWaitMins : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Number of minutes to wait before applying new scale up policy.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scaleUpPeriodCount : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The time in minutes to monitor the CPU/memory for high usage before scaling up.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scaleUpValue : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The CPU or memory usage above which scale up policy will take effect.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • autoStart : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Check this flag to autostart the application after it is deployed
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • debugMode (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Use this to log additional details/info from the http requests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Values: ENABLED, DISABLED
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • enableAutoScalePolicy : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • envVars (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        you can specify properties (key-value pairs) that the application uses during deployment and while running.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • key : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ignoreGlobalSettings : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If checked settings from global configuration will be used that are under manage jenkins.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • logLevels (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        You can configure the logging level (DEBUG, WARN, ERROR, or INFO) for the application
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • levelCategory (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Values: DEBUG, WARN, ERROR, INFO
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • packageName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • loggingNgEnabled : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Check this if you want to use your own logging solution using Log4j configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • monitoringAutoRestart : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        CloudHub automatically restarts your application when the monitoring system discovers an issue.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • monitoringEnabled : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Use Anypoint Monitoring and Visualizer for Mule applications running on supported versions of Mule.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • objectStoreV1 : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Object Store v2 is enabled by default in Mule 4. In Mule 3, select this option to use Object Store v1.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • persistentQueues : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        You can use persistent queues on your application to store data in an input queue to disk. Persistent queues protect against message loss and enable you to distribute workloads across a set of workers.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • persistentQueuesEncrypted : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If you enable persistent queues, you can optionally encrypt the data stored in the input queue on disk.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • timeoutConnection : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Max time to try before failing the request.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • timeoutResponse : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Max time to wait for response before failing the request.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verifyDeployments : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Verify if API is stated after deployment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verifyIntervalInSeconds : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workerAmount : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        No of workers to run for API.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workerCpu : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Compute Capacity for each worker(vCores). Check MuleSoft Documentation for available sizes(worker-size-and-vcores). Example Values :- 0.1, 2 or 16
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workerMemory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Heap memory (Or Ram) for each worker. Check MuleSoft Documentation for available sizes (worker-size-and-vcores. Example Values :- "500 MB", "1.5 GB" or "32 GB"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workerType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Type of worker to use "Micro", "Small", "Medium" or "Large". Check MuleSoft Documentation for additional details.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workerWeight : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Weight for worker type. Check MuleSoft Documentation for available sizes(worker-size-and-vcores). Example Values :- 0.1, 0.2 or 1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'CloudShellConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildStep
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'StartSandbox'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • blueprintName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Enter the name or id of a CloudShell blueprint.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sandboxDuration : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The sandbox duration in minuets.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • maxWaitForSandboxAvailability : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Enter the number of minutes to wait until the Sandbox becomes available in case no resources are available to reserve it.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • setupTimeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Enter the number of minutes to wait for the sandbox setup to complete
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • params : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Blueprint Parameter in this syntax: "input1=my_name; input2=30"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sandboxDomain : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Sandbox will be created in the following domain.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sandboxName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Sandboxes will be created with this name instead of the blueprint name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'CmakeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Uses CMake to generate build-scripts and can run these.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This causes Jenkins to invoke cmake -G with the given options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Any non-zero exit code during build-script generation causes Jenkins to mark the build as a failure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      It also can expose the CMAKE_BUILD_TOOL build environment variable if the chosen generator supports that.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • installationName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildDir : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • cleanBuild : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • cmakeArgs : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • generator : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • preloadScript : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sourceDir : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • steps (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • args : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specify arguments to pass to the build tool or to cmake. Arguments must be separated by spaces but may contain spaces if they are enclosed in double quotes (will be handled like a Unix shell does),
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Most of the time, you will want to leave this empty (to call the default build target) or you will specify just some build target names here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • envVars : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specify extra environment variables to pass to the build tool as key-value pairs here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Each entry must be on its own line, for example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          DESTDIR=${WORKSPACE}/artifacts/dir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          KEY=VALUE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • withCmake : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Whether to run the actual build tool directly (by expanding $CMAKE_BUILD_TOOL) or to have cmake run the build tool (by invoking cmake --build <dir>).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Leave unchecked for minimal performance overhead.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Make it checked, if you selected one of the Visual Studio or Xcode generators above AND if you run CMake v. 2.8.11 or newer.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'CocoaPodsBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • cleanpods : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If checked the "pod" folder will be deleted before updating the pods
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'CodeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • proxyHost : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • proxyPort : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • awsAccessKey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • awsSecretKey
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • awsSessionToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • region : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sourceVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sseAlgorithm : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sourceControlType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • localSourcePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workspaceSubdir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • gitCloneDepthOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • reportBuildStatusOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • secondarySourcesOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • secondarySourcesVersionOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • artifactTypeOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • artifactLocationOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • artifactNameOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • artifactNamespaceOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • artifactPackagingOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • artifactPathOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • artifactEncryptionDisabledOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • overrideArtifactName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • secondaryArtifactsOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • envVariables : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • envParameters : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildSpecFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildTimeoutOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sourceTypeOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sourceLocationOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • environmentTypeOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • imageOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • computeTypeOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • cacheTypeOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • cacheLocationOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • cacheModesOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • cloudWatchLogsStatusOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • cloudWatchLogsGroupNameOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • cloudWatchLogsStreamNameOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • s3LogsStatusOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • s3LogsEncryptionDisabledOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • s3LogsLocationOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • certificateOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • serviceRoleOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • insecureSslOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • privilegedModeOverride : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • cwlStreamingDisabled : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • exceptionFailureMode : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • downloadArtifacts : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • downloadArtifactsRelativePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workspaceExcludes : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workspaceIncludes : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'CodeCoverageBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • connectionId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • analysisPropertiesPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • analysisProperties : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • codescene
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Select username/password credentials defined in Jenkins configuration. This is a safe way to use credentials in Jenkins plugin. See Injecting Secrets into Jenkins Build Jobs for more details.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • deltaAnalysisUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • repository : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • analyzeBranchDiff : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • analyzeLatestIndividually : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Commits not seen in previous successful builds will be used for separate delta analyses.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • baseRevision : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • couplingThresholdPercent : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • failOnDecliningCodeHealth : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Check this option to mark the build as unstable if the Code Health of a hotspot declines.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • failOnFailedGoal : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Check this option to mark the build as unstable if a goal -- as defined by CodeScene's Intelligent Notes -- is violated. This could be a supervised hotspot that suddenly declines in Code Health, or a module indicated as No Problem that starts to accumulate complex code, etc.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • letBuildPassOnFailedAnalysis : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        By default we fail the build if CodeScene couldn't run an analysis (e.g. couldn't update the repository). This behaviour can be overridden here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • markBuildAsUnstable : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • originUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • riskThreshold : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'CodeStreamBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • serverUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        vRealize Automation host.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • userName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        User name
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • password : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Password
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tenant : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Tenant
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • pipelineName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        CodeStream pipeline name. Please not only latest version of this pipeline will be executed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • waitExec : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • pipelineParams
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'CodefreshPipelineBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • selectPipeline
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Check this if there's no SCM defined for current job or you would like to trigger a different service pipeline.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • cfPipeline : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • cfBranch : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • setCFVars
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • vars
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Variable : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'CommentsRemoverBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • filename : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Name of the input file to have comments removed from
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • language : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Language of the input file - helps locate comments
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • outputDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        After execution the result will be in this directory in the workspace
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'CompareBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Compare two different schemas (from database, repository or snapshot). Based on it you can do in the next steps further actions (like generating report or alter script)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • outputFolder : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Path to the folder in that should be used to store compare output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        It serves as input for following steps like Generate create SQL script or Generate Report.



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Folder location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Absolute path to location on your Jenkins master node
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Relative path to your project's workspace. Either starting with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Relative path to your job's run root directory. It must start with ${JOB_ROOT_DIR} prefix. i.e. ${JOB_ROOT_DIR}/dir.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • srcInputType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tgtInputType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • srcInputFileOrFolder : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify input folder/file that will be used as source side input for compare. Following inputs are expected.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Database - input is exported connection file
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • File System Synchronization - input is folder mapped through Toad Edge file system synchronization
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Snapshot - input is snapshot file



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Folder/file location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tgtInputFileOrFolder : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify input folder/file that will be used as target side input for compare. Following inputs are expected.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Database - input is exported connection file
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • File System Synchronization - input is folder mapped through Toad Edge file system synchronization
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Snapshot - input is snapshot file



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Folder/file location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • configFile : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify settings file location. This file should be exported from Toad Edge and contain all compare settings.



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        File location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'CompareWithBaselineBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Compare your current schema with the baseline. In case that the schema is different the build step will fail.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • outputFolder : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Path to the folder in that should be used to store baseline compare output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        It serves as input for following steps like Generate create SQL script or Generate Report.



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Folder location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Absolute path to location on your Jenkins master node
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Relative path to your project's workspace. Either starting with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Relative path to your job's run root directory. It must start with ${JOB_ROOT_DIR} prefix. i.e. ${JOB_ROOT_DIR}dir.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • srcInputType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tgtInputType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • srcInputFileOrFolder : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify input folder/file that will be used as source side input for baseline compare. Following inputs are expected.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Database - input is exported connection file
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • File System Synchronization - input is folder mapped through Toad Edge file system synchronization
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Baseline - input is baseline snapshot file



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Folder/file location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tgtInputFileOrFolder : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify input folder/file that will be used as target side input for baseline compare. Following inputs are expected.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Database - input is exported connection file
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • File System Synchronization - input is folder mapped through Toad Edge file system synchronization
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Baseline - input is baseline snapshot file



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Folder/file location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • configFile : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify settings file location. This file should be exported from Toad Edge and contain all compare settings.



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        File location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'CompoundBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ConditionalBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • runCondition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • runner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If the evaluation of a run condition fails, should the build fail, be marked unstable, run the build step ...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        A run condition evaluation may fail to run cleanly - especially if it is dependent on expanding tokens provided by the Token Macro Plugin and the values are expected to be present or look like a certain type i.e. be a number.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        ...its about the action to take when the condition can not be evaluated - this is not same as evaluating to false.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'DontRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Fail'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Run'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'RunUnstable'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Unstable'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • conditionalbuilders : Array / List of Build Step (hudson.tasks.BuildStep)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ConfigFileBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Make globally configured files available in your local workspace. All files configured via the config-file-provider plugin are available and can be referenced.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • managedFiles
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fileId : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Name of the file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • replaceTokens : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Decides whether the token should be replaced using macro.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • targetLocation : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Name of the file (with optional file relative to workspace directory) where the config file should be copied.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • variable : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Name of the variable which can be used as the reference for further configuration.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ConfluenceReleaseNotesPublisher'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • jiraCredentialsID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  These jira credentials and project will be used to operate on.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • confluenceCredentialsID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This confluence together with the credentials will be used to publish the page.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • spaceKey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The key of the space on which the new page will be published
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • jqlFilter : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  A JQL filter used to select the tickets that will be shown on the newly created page. See the JIRA documentation for more information on how to use JQL.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • pageTitle : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The title of the new page that will be published.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • parentPageTitle : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If specified the entire content tree of the space is searched for a page with this title. The new release notes page will be then published as a child page of this one.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ConsulBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • installationName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • operationList
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ConsulGetKV'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • valuePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Consul path for the required value.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      e.g. mysql/config/users/admin
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • environmentVariableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Environment variable name for the value.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ConsulServiceDiscoveryOperation'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serviceName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Service name to look in consul
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serviceTag : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Service tag - leave empty for no tag filtering.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • environmentVariableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Environment variable name for the response.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Leave empty to use the same name of the service.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • healthStatus : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Service health status.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • addPort : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Add port number to response?
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The port will be added for every ip address - {ip}:{port}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ConsulSetKV'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • valuePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Consul path to set with your value.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      e.g. mysql/config/users/admin
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Value or ENV var name to use.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • consulSettingsProfileName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ConsulKVBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • hostUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Host URL should contain protocol (HTTP/HTTPS)://<HOST_NAME>.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • key : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Key is used in GET/PUT requests to lookup the value from, or right the key/value pair to the Consul key/value store.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • aclToken : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Token is used to supply UUID token for Consul ACL token calls. Token can be supplied by build parameters.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • apiUri : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  URL Override is used to override the K,V API URL.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • debugMode (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Enable Debug messages for more verbose logging.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Values: ENABLED, DISABLED
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • envVarKey : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ENV Varaible Key is used to store the retrieved value in the build ENV variables to be used downstream.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ignoreGlobalSettings : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • keyValue : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Value is used in PUT calls to insert/update a key/value pair.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • requestMode (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Request Mode set to READ will execute a GET to lookup the value, WRITE will execute a PUT to insert/update the value.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Values: READ, WRITE, DELETE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeoutConnection : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Connection timeout in milliseconds, default is 10000.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeoutResponse : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Response timeout in milliseconds, default is 30000.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • assessContainerImage
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • failOnPluginError : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Enable this option to fail the build if the plugin encountered any errors.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • imageId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Provide a Docker image ID or name which can be referenced by the Docker daemon (e.g. my-repo/my-image:my-tag).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • nameRules (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • packageName
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • action : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select Fail to set the build status to Fail. Select Mark Unstable to set the build status to Unstable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • contains : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Set the name that will trigger the selected action.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • vulnerabilityCategory
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • action : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select Fail to set the build status to Fail. Select Mark Unstable to set the build status to Unstable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • contains : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Set the name that will trigger the selected action.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • vulnerabilityTitle
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • action : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select Fail to set the build status to Fail. Select Mark Unstable to set the build status to Unstable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • contains : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Set the name that will trigger the selected action.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • vulnerablePackageName
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • action : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select Fail to set the build status to Fail. Select Mark Unstable to set the build status to Unstable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • contains : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Set the name that will trigger the selected action.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • thresholdRules (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • criticalVulnerabilities
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • action : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select Fail to set the build status to Fail. Select Mark Unstable to set the build status to Unstable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • threshold : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Set the numeric threshold value that will trigger the selected action.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • cvssV2Score
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • action : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select Fail to set the build status to Fail. Select Mark Unstable to set the build status to Unstable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • threshold : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Set the numeric threshold value that will trigger the selected action.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • exploitableVulnerabilities
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • action : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select Fail to set the build status to Fail. Select Mark Unstable to set the build status to Unstable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • threshold : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Set the numeric threshold value that will trigger the selected action.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • vulnerabilitiesWithMalwareKits
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • action : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select Fail to set the build status to Fail. Select Mark Unstable to set the build status to Unstable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • threshold : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Set the numeric threshold value that will trigger the selected action.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • moderateVulnerabilities
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • action : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select Fail to set the build status to Fail. Select Mark Unstable to set the build status to Unstable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • threshold : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Set the numeric threshold value that will trigger the selected action.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • packageRiskScore
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • action : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select Fail to set the build status to Fail. Select Mark Unstable to set the build status to Unstable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • threshold : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Set the numeric threshold value that will trigger the selected action.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • riskScore
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • action : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select Fail to set the build status to Fail. Select Mark Unstable to set the build status to Unstable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • threshold : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Set the numeric threshold value that will trigger the selected action.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • severeVulnerabilities
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • action : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select Fail to set the build status to Fail. Select Mark Unstable to set the build status to Unstable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • threshold : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Set the numeric threshold value that will trigger the selected action.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • totalVulnerabilities
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • action : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select Fail to set the build status to Fail. Select Mark Unstable to set the build status to Unstable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • threshold : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Set the numeric threshold value that will trigger the selected action.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • treatWarningsAsErrors : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Enable this option to treat warnings as errors, which will fail the build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • workspaceDir : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • contentReplace
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • configs (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    A relative or absolute file path
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fileEncoding : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • configs
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • matchCount : int (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Set "Match count" to 0 will do replace all

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • replace : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      You can use variables enclosed in ${}. e.g. $11.0.${BUILD_ID}

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      So, The string "Version=0.0.1" would be replace to Version=1.0.9 when the value of BUILD_ID is 9

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • search : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Regex expression for search. e.g. (Version=)([0-9]+\.[0-9]+\.[0-9]+)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • verbose : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Check "Verbose" to display in the console all the replacements made.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ContinuousReleaseProperties'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • properties
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Type: java.util.Map<java.lang.String, java.lang.String>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'CoordinatorBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Add/Remove node, add/remove jobs, rename, check, right click to switch on Serial or Parallel pattern and have fun!
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • executionPlan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Type: class org.jenkinsci.plugins.coordinator.model.TreeNode
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'CopadoBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • stepName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • webhookUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Enter the Copado URL for the test that you want to run on this build step. The Copado URLs (webhooks) that are available for Copado can be found using this url http://docs.copa.do.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • api_key : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Enter your Copado API Key. A personal API Key is generated from the Account Summary tab in Copado. This makes it easy to use the API.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  To obtain a new personal API Key, navigate in Copado to the Account Summary tab - API Key and press the "Generate new API Key" button if you haven't done it already.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Please note that resetting/changing the API will require these values here to be updated too.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Enter timeout in seconds for your Copado jobs to complete. After the Copado task is triggered, this plugin will repeatedly poll the Copado API (approx. 10 every second) for the result. If the time it takes to complete the test exceeds this timeout value, this build step will abort and fail.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • copyArtifacts
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • projectName : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The name of the project to copy artifacts from.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Maven projects:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Artifacts from all modules will be copied. Enter JOBNAME/MODULENAME here to copy from a particular module; you may copy/paste this from the URL for that module when browsing Jenkins.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: MyMavenJob/my.group$MyModule

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Matrix projects:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Artifacts from all configurations will be copied, each into a subdirectory with the name of the configuration as seen in its URL when browsing Jenkins.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: If the target directory is given as fromMatrix then the copy could create $WORKSPACE/fromMatrix/label=agentA/dist/mybuild.jar and $WORKSPACE/fromMatrix/label=agentB/dist/mybuild.jar.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  To copy from a particular configuration, enter JOBNAME/AXIS=VALUE,.. as seen in the URL for that configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: MyMatrixJob/jdk=Java6u17

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  To copy artifacts from one matrix project to another, use a parameter to select the matching configuration in the source project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: OtherMatrixJob/jdk=$jdk

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Multibranch Pipeline projects:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Use a path consisting of the project name followed by the branch name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: /MyMultibranchProject/MyBranch

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Special letters like '/' in branch names should be escaped. You can see the exact name in "Full project name" in job pages of each branch.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: ../MyMultibranchProject/feature%2Fnavigation

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  See the wiki page "How to reference another project by name" for more information.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • excludes : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify paths or patterns of artifacts to exclude, even if specified in "Artifacts to copy". Can be blank.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • filter : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Relative paths to artifact(s) to copy or leave blank to copy all artifacts. This works just as a filter, and doesn't care whether all specified artifacts really exists. Check the /artifact/ browser of a build to see the relative paths to use here, as the build page typically hides intermediate directories. Can use wildcards like module/dist/**/*.zip, and use comma (followed by optional whitespace) to separate multiple entries. See the @includes of Ant fileset for the exact format. May also contain references to build parameters like $PARAM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • fingerprintArtifacts : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • flatten : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • optional : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • parameters : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Jobs may be filtered to select only builds matching particular parameters or other build variables. Use PARAM=VALUE,... to list the parameter filter; this is the same syntax as described for multiconfiguration jobs in Project name except with parameters instead of axis values. For example, FOO=bar,BAZ=true examines only builds that ran with parameter FOO set to bar and the checkbox for BAZ was checked.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  You shouldn't use "Build selector for Copy Artifact" parameters here, as it doesn't preserve compatibility when you upgrade plugins, and doesn't work for builds built before upgrading.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • resultVariableSuffix : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The build number of the selected build will be recorded into the variable named COPYARTIFACT_BUILD_NUMBER_(SUFFIX) for later build steps to reference. You can specify that suffix part for that variable here.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If not specified, the source project name will be used instead (in all uppercase, and sequences of characters other than A-Z replaced by a single underscore).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Source project name Suffix to be used
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Project-ABC PROJECT_ABC
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  tool1-release1.2 TOOL_RELEASE_
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • selector (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  How to select the build to copy artifacts from, such as latest successful or stable build, or latest "keep forever" build. Other plugins may provide additional selections.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The build number of the selected build will be recorded in the environment for later build steps to reference. For details, see the help of "Result variable suffix" in "Advanced" section.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • downstream
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • upstreamProjectName : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Downstream builds are found using fingerprints of files. That is, a build that is triggered from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Note: "Downstream build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      AbstractProject based projects:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Freestyle projects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Multi-configuration projects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Maven projects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Non AbstractProject based projects:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Pipeline jobs (aka. Workflow jobs)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • upstreamBuildNumber : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • lastWithArtifacts
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • lastCompleted
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'MultiJobBuildSelector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • buildParameter
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • parameterName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Name of the "build selector" parameter. A parameter with this name should be added in the build parameters section above. There is a special parameter type for choosing the build selector.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            You can pass not only the parameter name, but also the parameter value itself. This is useful especially used with workflow-plugin.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • permalink
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • id : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'PromotedBuildSelector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • level : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • latestSavedBuild
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • specific
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildNumber : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              While this selector is for build numbers (e.g. "22" for build #22), you can also resolve build parameters or environment variables (e.g. "${PARAM}"). The display name of a build and permalinks (e.g. "lastSuccessfulBuild", "lastBuild"...) can be used as well.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • lastSuccessful
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • stable : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • upstream
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • allowUpstreamDependencies : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • fallbackToLastSuccessful : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • upstreamFilterStrategy (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Jenkins launches only one build when multiple upstreams triggered the same project at the same time. This field specifies from which upstream build to copy artifacts in those cases. "Use the oldest" copies artifacts from the upstream build with the smallest build number (that is, oldest). "Use the newest" copies artifacts from the upstream build with the largest build number (that is, newest). The default value is "Use global setting", which behaves as configured in "Manage Jenkins" > "Configure System".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Values: UseGlobalSetting, UseOldest, UseNewest
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • workspace
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • target : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Target base directory for copy, or leave blank to use the workspace. Directory (and parent directories, if any) will be created if needed. May contain references to build parameters like $PARAM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'CreateBaselineBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Set the current state of your schema as the baseline to detect any changes that has been made into the schema since now.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • outputFile : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Path to the file that should be used to store baseline.



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            File location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Absolute path to location on your Jenkins master node
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Relative path to your project's workspace. Either starting with ${WORKSPACE} prefix. i.e. ${WORKSPACE}file or without prefix i.e. file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Relative path to your job's run root directory. It must start with ${JOB_ROOT_DIR} prefix. i.e. ${JOB_ROOT_DIR}file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • inputFileOrFolder : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify input folder/file for creating baseline. It should depend on input type you have selected.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Database - input is exported connection file
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • File System Synchronization - input is folder mapped through Toad Edge file system synchronization



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Folder/file location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'CreateBuildBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Creates a new build for the selected BuildMaster application and sets the BUILDMASTER_BUILD_NUMBER environment variable with the value returned from BuildMaster for the new build.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If your Jenkins job has produced artifacts to be loaded into BuildMaster, you have the following options. The choice is largely dependent on how you import the build artifacts into BuildMaster:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          1. Use BuildMasters Jenkins Extensions 'Jenkins::Import-Artifact' statement to import artifacts directly from Jenkins: the post build action is required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          2. Use BuildMasters 'Create-Artifact' statement to import files from a folder that you've placed the artifacts into from the Jenkins build (eg using ArtifactDeployer Plugin): either the post build or build step actions will be fine
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          3. Use an external artifact repository such as Nexus, Artifactory or ProGet: either the post build or build step actions will be fine
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • applicationId : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The identifier of the BuildMaster application to trigger the build for.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Options are:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • The BUILDMASTER_APPLICATION_ID variable populated by a previous step
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • An application
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • releaseNumber : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The BuildMaster release number to trigger the build for. Options are:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • BUILDMASTER_RELEASE_NUMBER: variable populated by a previous step
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Latest Active Release: will automatically get the latest active release number from BuildMaster for the selected application
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • [Release Number]: a release number from the list of active releases

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The job will fail if there is no active BuildMaster release.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • deployToFirstStage (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Will trigger the deployment to the first stage, and any subsequent stages where the stage is configured to automatically deploy to the next stage.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • waitUntilCompleted : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If checked waits until BuildMaster has completed the deployment, otherwise will exits immediately after triggering the deployment to the first stage.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • printLogOnFailure : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If checked will print the BuildMaster log for the deployment to the Jenkins console if the build fails - but only if the "Wait until deployment completed" option is also checked.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • variables : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Provide a list of variables to pass to the build.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • A variable must be in the format "variable=value"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Additional variables must be declared on separate lines
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Lines starting with # are treated as comments
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • When using pipeline script and you want to pass several variables use one of these formats:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Separate variables using newline character. Generated script will resemble: variables: 'var1=one\nvar2=two'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Separate variables using multi-line string. Generated script will resemble: variables: '''var1=one
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                var2=two'''
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'CreateCustomTaskrun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • generateName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • namespace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • clusterName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • workspaces
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • claimName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • params
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • taskRef : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • createCloudifyEnv

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Creates a topology from an environment blueprint.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The "Output File" parameter denotes where the new environment's outputs will be written to. Later build steps can inspect this file in order to grab information pertinent to them (such as IP addresses, user names and so forth).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          All input fields support standard Jenkins parameters' expansion. For example, the string ${app_name} will be expanded, in runtime, to the value of a build parameter called app_name .

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For explanation about the format of the outputs file, refer to the help tooltip for that parameter.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • blueprintId : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Unique identifier for the created deployment.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • credentialsId : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The ID of the credentials to use when accessing Cloudify. Parameters' expansion is supported when using freestyle jobs.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • debugOutput : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If checked, then printed Cloudify events and logs will include debug-level records.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • deploymentId : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Identifies the blueprint to create a deployment off.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • echoInputs : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If checked, then the Cloudify deployment inputs are echoed to the Jenkins log.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • echoOutputs : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            At the end of the build step, print the outputs and capabilities to the console.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • inputs : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            A YAML/JSON containing inputs for the deployment. These inputs will be merged with inputs provided through the " inputs file " parameter.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • inputsFile : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            A path (relative to the workspace root) to a YAML/JSON file containing inputs for the deployment. These inputs will be merged with inputs provided through the " inputs " parameter.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • mapping : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If specified, this YAML/JSON will be used to transform a YAML/JSON coming from the "inputs file" parameter. This is useful if the "inputs file" is the result of a different Cloudify environment build.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This parameter must not be provided if "mapping file" is provided.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • mappingFile : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If specified, this YAML/JSON file will be used to transform a YAML/JSON coming from the "inputs file" parameter. This is useful if the "inputs file" is the result of a different Cloudify environment build.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This parameter must not be provided if "mapping" is provided.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • outputFile : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Name of file into which the deployment's outputs and capabilities will be written. The file will be a JSON, adhering to the following format:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                "outputs": <outputs_dictionary>,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                "capabilities": <capabilities_dictionary>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • skipInstall : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Only create a Cloudify deployment; skip running the install workflow.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tenant : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Cloudify tenant to operate on. If left empty, then the default tenant (defined in the plugin's configuration page) will be used.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'CreateFingerprint'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Create Fingerprints of specified files during a build process

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • targets : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'CreateRelease'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • prefix : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Enter the prefix of your project here. Example: P10 (P10 - Project number)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • itemPrefix : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Enter the prefix of your item here. Example: P1#I10 (P1 - Project number, I10 - Item number), P#I11, P#I12, P2#I13
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • releaseName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Enter the name of the release here
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • description : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Add a line or two to describe the release
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • stage : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Mention the stage of the release
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • owner : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Mention the email id of the release’s owner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • period : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Mention the number of days required for the release (not lesser than 3)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'CreateSnapshotBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Save your database schema to a file to have the possibility to return to it any time later.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • outputFile : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Path to the file that should be used to store snapshots.



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            File location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Absolute path to location on your Jenkins master node
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Relative path to your project's workspace. Either starting with ${WORKSPACE} prefix. i.e. ${WORKSPACE}file or without prefix i.e. dir.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Relative path to your job's run root directory. It must start with ${JOB_ROOT_DIR} prefix. i.e. ${JOB_ROOT_DIR}file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • inputFileOrFolder : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify input folder/file for creating snapshot. It should depend on input type you have selected.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Database - input is exported connection file
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • File System Synchronization - input is folder mapped through Toad Edge file system synchronization



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Folder/file location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • createTag
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • nexusInstanceId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tagName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Tag name is required and must be unique. Name can only contain letters, numbers, underscores, hyphens and dots and cannot start with an underscore or dot. The name cannot exceed 256 characters
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tagAttributesJson : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Optional metadata for the tag in JSON format. These attributes will be merged with those contained in the attributes file if both are provided. Attributes in this field will override those present in the file
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tagAttributesPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The file path (environment-aware) to the optional metadata for the tag, using the workspace as the base path
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • createTask
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • artifact : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • artifactType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • autoUpgradable : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • environment : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • isjob : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • overrideWithDefaultParameters : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • parameters : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • runtime : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • runtimeType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • workspace : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'CreateTemplate'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • cloud : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • workspace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The workspace in ElasticBox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • instanceTags : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • templateName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • provider : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • datacenter : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • folder : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • datastore : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • claimFilter : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • policyName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • claims : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'CriticalBlockEnd'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Release all resources that Critical block start had allocated for this job.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CriticalBlockStart'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Delimit the beginning of the exclusion zone. All build steps that follow will be managed by exclusion plugin.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'CucumberSlackBuildStepNotifier'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • channel : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • json : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • hideSuccessfulResults : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'CustomPythonBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • home : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • nature : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ignoreExitCode : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'CxScanBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                This option is for users that may already have Jenkins credentials, as defined in Jenkins, and would like to use them with the CxSAST Jenkins plugin. Select your credentials from the drop-down list.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                NOTE: If your credentials do not exist in the system, you can add them by clicking Add and selecting Jenkins (see Adding Jenkins Credentials to the CxSAST Jenkins Plugin, for more information).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • sastCredentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • buildStep : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • teamPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • sastEnabled : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • exclusionsSetting : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • failBuildOnNewResults : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Enables the option to fail the build according to the defined severity (or higher). This option works in addition to the regular thresholds (e.g. if "x" total high vulnerabilities were found OR at least 1 new vulnerability, fail the build). This option is only available if the "Enable vulnerability threshold" parameter is enabled.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • failBuildOnNewSeverity : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • useOwnServerCredentials : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • serverUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Checkmarx server url or ip address with or without port. Syntax: http(s)://server-name:port. Example: http://checkmarx-server, https://10.0.0.255:9495
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • username : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Login username
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • password : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Login password
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • isProxy : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • configAsCode : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • projectName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                A full absolute name of a project. The full Project name includes the whole path to the project, including Server, service provider, company, and team. Example: "CxServer\SP\Company\Users\bs_java" If project with such a name doesn't exist in the system, new project will be created. May reference build parameters like ${PARAM}.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • projectId : long (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • groupId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Fully qualified team name for the project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • preset : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Select the scan preset for this project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • jobStatusOnError (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Determines how to act when a triggered Checkmarx scan in synchronous mode fails and returns an error message (i.e. no scan results, not to be confused with valid scan results that exceed the threshold).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • FAILURE is equivalent to a Job error that fails the entire build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • UNSTABLE is equivalent to a Job warning that allows the build to proceed normally but provides an unstable status upon completion.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Use the global setting implies that this project uses the value either FAILURE or UNSTABLE defined globally by the CxSAST Jenkins plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Values: GLOBAL, FAILURE, UNSTABLE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • presetSpecified : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • excludeFolders : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Comma separated list of folders to exclude from scan. Entries in this list are automatically converted to exclude wildcard patterns and appended to the full pattern list provided in the advanced section. May reference build parameters like ${PARAM}.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Conversion is done as follows:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                fold1, fold2 fold3
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                is converted to:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                !**/fold1/**/*, !**/fold2/**/*, !**/fold3/**/*,

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • filterPattern : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Comma separated list of include or exclude wildcard patterns. Exclude patterns start with exclamation mark "!".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Example: **/*.java, **/*.html, !**\test\**\XYZ*

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Pattern Syntax

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                A given directory is recursively scanned for all files and directories. Each file/directory is matched against a set of selectors, including special support for matching against filenames with include and exclude patterns. Only files/directories which match at least one pattern of the include pattern list, and don't match any pattern of the exclude pattern list will be placed in the list of files/directories found.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                When no list of include patterns is supplied, "**" will be used, which means that everything will be matched. When no list of exclude patterns is supplied, an empty list is used, such that nothing will be excluded. When no selectors are supplied, none are applied.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The filename pattern matching is done as follows: The name to be matched is split up in path segments. A path segment is the name of a directory or file, which is bounded by File.separator ('/' under UNIX, '\' under Windows). For example, "abc/def/ghi/xyz.java" is split up in the segments "abc", "def","ghi" and "xyz.java". The same is done for the pattern against which should be matched.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The segments of the name and the pattern are then matched against each other. When '**' is used for a path segment in the pattern, it matches zero or more path segments of the name.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                There is a special case regarding the use of File.separators at the beginning of the pattern and the string to match:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                When a pattern starts with a File.separator, the string to match must also start with a File.separator. When a pattern does not start with a File.separator, the string to match may not start with a File.separator. When one of these rules is not obeyed, the string will not match.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                When a name path segment is matched against a pattern path segment, the following special characters can be used:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                '*' matches zero or more characters
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                '?' matches one character.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                May reference build parameters like ${PARAM}.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Examples:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                "**\*.class" matches all .class files/dirs in a directory tree.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                "test\a??.java" matches all files/dirs which start with an 'a', then two more characters and then ".java", in a directory called test.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                "**" matches everything in a directory tree.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                "**\test\**\XYZ*" matches all files/dirs which start with "XYZ" and where there is a parent directory called test (e.g. "abc\test\def\ghi\XYZ123").

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • incremental : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Run incremental scan instead of full scan.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fullScansScheduled : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fullScanCycle : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Incremental scans are faster, but with time they become less accurate.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Therefore, after a number of incremental scans it is recommended to perform a full scan.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Here you can schedule periodic full scans to be executed after a certain number of incremental scans.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Alternatively, if you want to run full scans on weekends, you can create 2 separate jobs.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                First job - to run incremental scans on weekdays and second job - to run full scans on weekends.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • postScanActionId : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Select Post Scan Action name that is to be performed automatically after a scan.(Note that the feature works with 9.3 version SAST onwards.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • sourceEncoding : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Source code character encoding.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • comment : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Free text comment. If the comment contains variables like ${GIT_COMMIT}, ${GIT_BRANCH}, ${GIT_URL}, ${GIT_AUTHOR_NAME} or any Jenkins variable. It shall be expanded as long as it is a valid variable available to Jenkins else considers it as plain text.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • skipSCMTriggers : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Do not perform Checkmarx scan when the build was triggered by SCM Change.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • waitForResultsEnabled : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                In synchronous mode, Checkmarx build step will wait for Checkmarx scan to complete, then retrieve scan results and optionally check vulnerability thresholds. When disabled, the build step finishes after scan job submissions to Checkmarx server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • vulnerabilityThresholdEnabled : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Mark the build as unstable if the number of high severity vulnerabilities is above the specified threshold.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • highThreshold : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                High severity vulnerability threshold. If set, the threshold is crossed if number of high severity vulnerabilities exceeds it.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • mediumThreshold : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Medium severity vulnerability threshold. If set, the threshold is crossed if number of medium severity vulnerabilities exceeds it.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • lowThreshold : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Low severity vulnerability threshold. If set, the threshold is crossed if number of low severity vulnerabilities exceeds it.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • osaHighThreshold : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                High severity vulnerabilities threshold for dependency scan. If set, the threshold is crossed if number of high severity vulnerabilities exceeds it.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • osaMediumThreshold : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Medium severity vulnerabilities threshold for dependency scan. If set, the threshold is crossed if number of medium severity vulnerabilities exceeds it.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • osaLowThreshold : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Low severity vulnerabilities threshold for dependency scan. If set, the threshold is crossed if number of low severity vulnerabilities exceeds it.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • generatePdfReport : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Downloads a PDF report with scan results from the Checkmarx server. The report is available via a link on "Checkmarx Scan Results" page.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • enableProjectPolicyEnforcement : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Mark the build as failed or unstable if the project's policy is violated.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Note:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Assigning a policy to a project is done from within CxSAST
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • thresholdSettings : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • vulnerabilityThresholdResult : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • avoidDuplicateProjectScans : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                If there is a scan of this project in the queue in status working or queued do not send a new scan request to Checkmarx
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • addGlobalCommenToBuildCommet : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Allow global sast comment to be added to the build comment.By default the global comment is empty. When both job level comments and global comments are provided and 'Allow Global comment' is selected, then both comments shall be concatenated.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • generateXmlReport : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Generate full XML and HTML CxSAST scan reports. These reports will contain additional information about the detected vulnerabilities
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • hideDebugLogs : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Enabling this will not generate any debug level logs in the job output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • forceScan : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Force Scan - If force scan is enabled, SAST will perform scan even if there are no code changes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • customFields : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Add scan level custom fields and its value. Example: field1:value1,field2:value2.(Note that the feature works with 9.4 version SAST onwards.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • dependencyScanConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • SASTUserName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • dependencyScanExcludeFolders : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • dependencyScanPatterns : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • dependencyScannerType (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Values: OSA, SCA
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • enableScaResolver (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Values: SCA_RESOLVER, MANIFEST
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • fsaVariables : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • isExploitablePath : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • isIncludeSources : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • osaArchiveIncludePatterns : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • osaInstallBeforeScan : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • overrideGlobalConfig : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • pathToScaResolver : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • sastCredentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scaAccessControlUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scaConfigFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scaCredentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scaEnvVariables : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scaResolverAddParameters : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scaSASTProjectFullPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scaSASTProjectID : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scaSastServerUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scaServerUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scaTeamPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scaTenant : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scaTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scaWebAppUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • useJobLevelSastDetails : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • excludeOpenSourceFolders : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • includeOpenSourceFolders : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • osaArchiveIncludePatterns : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Comma separated list of archive wildcard patterns to include their extracted content for the scan. eg. *.zip, *.jar, *.ear
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Supported archive types are: jar, war, ear, sca, gem, whl, egg, tar, tar.gz, tgz, zip, rar
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Leave empty to extract all archives
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • osaEnabled : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • osaInstallBeforeScan : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Select this option in order to be able to scan packages from various dependency managers (NPM, Nugget, Python and more.) as part of the CxOSA scan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • thisBuildIncremental : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • DASTScan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • apikey (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Your API key can be found on the Breachlock Platform under

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Organization settings > Integrations > Jenkins

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • asset : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Select the asset that will be scanned on build.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                If the asset you are looking for is missing:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • email : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The email-address you registered on Breachlock Platform.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • osfBuilderSuiteForSFCCDataImport
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • hostname : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • tfCredentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ocCredentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ocVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • archiveName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • sourcePath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • includePatterns (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • excludePatterns (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • excludePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • importStrategy : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • tempDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'DaticalDBBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • daticalDBProjectDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The Datical DB Project Directory is the path location of your Datical DB Project folder. This will contain a datical.project file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Typically, this will be a relative path as it will be created by Jenkins during source code checkout. If you Datical DB Project is stored in the db folder under the root of your source tree and is named "My Project", you should enter ./db/My Project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • daticalDBServer : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The Datical DB Server Name is the name of the server you wish to manage with Datical DB. You can determine this value by opening Datical DB and choosing a server listed in your Deployment Plan. Directory is the path location of your Datical DB Project folder. This will contain a datical.project file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • daticalDBAction : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The Datical DB Action is the action you wish Datical DB to perform.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                This can include the following:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Forecast - provides a report detail the changes, if any, that will be applied to your database along with impact analysis. This does NOT commit changes to your database. This file will be stored in your build workspace. Requires DB Server specification.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Snapshot - reverse engineers your database schema to a Datical DB XML file. This file will be stored in your build workspace. Requires DB Server specification.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Deploy - executes any changes required as detailed in your Project. This will generate a report detailing the chnages and be stored in your build workspace. Requires DB Server specification.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Status - provides the current status of the database in relation to your Project. DB Server specification is optional.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Status (Detailed) - details the current status of the database in relation to your Project. DB Server specification is required.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Check Drivers - validates the appropriate JDBC driver is available to Datical DB for your specific Project. The location of the drivers is specified in the Jenkins global config. (Jenkins --> Manage Jenkins --> Configure System --> Datical DB)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Check Rules - validates the Rules located in your Datical DB project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Generate Change Log from Differences - generates a new Change Log representing the difference between two databases in your Datical DB project. Two Servers are required (e.g., Source Target). diffChangelog reference db target db --output path. Output is optional.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Generate Report from Differences - like the previous Action, generates a report representing the difference between two databases in your Datical DB project. Two Servers are required (e.g., Source Target). diff reference db target db.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • History - provides a history report of changes applied to your database(s).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Rollback - Roll the target database back to a given revision, date or by number of steps.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Deploy with Auto Rollback - Identical to "Deploy" but will Automatically Rollback to previous state in event of error.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Create Datical Project - Creates a new Datical Project in the Project Directory. Useful for when you are only provided the changelog.xml file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Create New Database Definition - Adds a new Database Definition to an existing Datical Project. (e.g., DbDefClass MysqlDbDef name Dev username datical password password hostname localhost port 3306 database dev)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Install License - Installs a license file. Requires the path to the new license file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Set Property - Set a Datical DB Property in daticaldb.properties.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Create Datical Project (project_creatory.groovy) - Creates a Datical Project using Provisiong Files. See project_creator.groovy in repl/scripts.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Baseline Datical Project (project_baseline.groovy) - Baselines a Datical Project. See project_baseline.groovy in repl/scripts
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • daticalDBCmdProject : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The Datical DB Command is the fully qualified location of the Datical DB CLI command. It will override the Global Datical DB Command. This is typically not needed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          This should be a fully qualified file path such as C:\DaticalDB\repl\hammer.bat or /opt/DaticalDB/repl/hammer.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • daticalDBExportSQL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          When checked for Deploy and Forecast actions, Datical DB will export SQL to be run against the target server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • daticalDBExportRollbackSQL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          When checked for Deploy and Forecast actions, Datical DB will export Rollback SQL to be run against the target server. When checked for Rollback, will only export SQL and NOT perform a Rollback.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • daticalDBScriptDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The Datical DB Script Directory is the fully qualified location of the Datical DB Scripts.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          This should be a fully qualified file path such as file:/C:\DaticalDB\repl\scripts or /opt/DaticalDB/repl/scripts.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • debianPbuilder
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • additionalBuildResults : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        When running a build in the chroot environment, there are occasionally files that you must retrieve from the chroot that are not part of the normal build. For example, some files that you may need to get back would include test results, auto-generated files, etc.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Set this variable in order to get the files back from the chroot build environment.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The files that are retrieved will also automatically be archived as well with the other build results.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This must be a comma-separated list; spaces are allowed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • architecture : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The architecture to build this as.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If the project is using the Matrix Build plugin, leave this blank (the architectures to build for are defined by the 'architecture' environment variable).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This is mostly to support Pipeline, however it can be used as a normal parameter as well.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildAsTag : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Set this to mark this as building a tag. When a build comes from a tag, the deb version does not get incremented(i.e. it is exactly as set in the debian/changelog file). If using SVN, this plugin automatically looks at the SVN_URL_1 environment variable to see if the string "tags/" exists. If it does, the build will act as though this parameter is set. If using Git, this plugin automatically looks at the GIT_BRANCH environment variable to see if the string "tags/" exists. If it does, the build will act as though this parameter is set. Alternatively, you can also set the environment variable DEB_PBUILDER_BUILDING_TAG to either true or false.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • components : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The components to build with. By default, pbuilder sets this to 'main'. If you're building an Ubuntu package, you may need to set this to "main restricted universe multiverse"

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The setting guessComponents must be false for this setting to be honored.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • debianDirLocation : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The location of the debian/ directory, relative to workspace root

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This may also be set globally

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • distribution : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The distribution to build for. By default, this checks the distribution that is set in debian/changelog. If the version in the changelog is UNRELEASED, it attempts to use the currently running distribution if this parameter is NULL or a 0-length string.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • extraPackages : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Extra packages to install in the chroot environment. Corresponds to EXTRAPACKAGES in the pbuilder configuration

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • guessComponents : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If set to true, automatically try to guess the components. This means that if we think we are building an Ubuntu package on Debian, our components will be automatically set to "main restricted universe multiverse"

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • keyring : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The keyring to build with. By default, we will attempt to figure out if we are building a Debian package on Ubuntu, and if we think that we are this will be set to /usr/share/keyrings/debian-archive-keyring.gpg. This file is part of the debian-archive-keyring package. If you need to use a custom keyring, put it in here. If for some reason the auto-detection is not working properly, set this to the string 'disabled' and no keyring settings for pbuilder will be set.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • mirrorSite : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The mirror site to use. If this is not set or a 0-length string, then the default mirror site for this distribution will be used. The default mirror site is defined in /etc/pbuilderrc

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • numberCores : int (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The number of cores to use when building. By default, this is 1. Set to -1 in order to use as many cores as possible when building. In order for this to take effect, you need to make sure that your debian/rules is setup properly. See this post.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • otherMirror : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The extra mirror to use. Corresponds to OTHERMIRROR configuration option in pbuilder

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • pristineTarName : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If this field set, and if source/format indicates that this is a quilt package, we will attempt to checkout the given original tar file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • runAutomationHubBuild
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testSuiteId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • startOnly : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • userKeyId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • userKeySecret (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • dotnetNuGetDelete
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The dotnet nuget delete command deletes or unlists a package from the server. For nuget.org, the action is to unlist the package.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiKeyId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The API key for the server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • charset : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The character set to use for the step's output. If not specified, the charset associated with the build will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • continueOnError : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If this is checked, errors encountered will cause the build status to be set to FAILURE (or UNSTABLE, if configured that way), but the build will be allowed to continue. Otherwise, any such errors will cause the build to be terminated immediately.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • forceEnglishOutput : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Forces the application to run using an invariant, English-based culture.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • noServiceEndpoint : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Doesn't append "api/v2/package" to the source URL.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Available since: .NET Core SDK 2.1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • packageName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Name/ID of the package to delete.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • packageVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Version of the package to delete.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sdk : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Name of a .NET SDK to use so that dotnet will be in the path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If the default is specified, you either need to use the With .NET element (or a withDotNet block in a pipeline script) to specify one, or ensure this step runs on a node that has a .NET SDK installed and in the path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • showSdkInfo : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If enabled, dotnet --info will be executed before the main command. This shows a list of available SDKs and runtimes, indicating which one is currently being used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • source : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specifies the server URL. Supported URLs for nuget.org include https://www.nuget.org, https://www.nuget.org/api/v3, and https://www.nuget.org/api/v2/package. For private feeds, replace the host name (for example, %hostname%/api/v3).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • specificSdkVersion : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Depending on the platform, the dotnet executable may use the most recent SDK available on the system, even when PATH is set up to find an older SDK deployment first; see this page for more information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        By enabling this option, the configured SDK home directory will be checked, and if it only includes a single SDK deployment, a global.json file will be created in the current directory, referencing that SDK version and disabling roll-forward.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Note: This will silently overwrite any global.json already present in the current directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The directory in which to execute the command. By default, this is the current directory (for freestyle jobs, that is the root of the job's workspace).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'DeleteApplication'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • serverName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Select the a server from the list of servers configured in Jenkins Global Configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • appName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Name of the gear to be deleted.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • domain : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Select the user domain containing the application.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • deleteCloudifyBlueprint
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Use this step to delete a Cloudify blueprint from Cloudify Manager.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • blueprintId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        ID of blueprint to delete.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The ID of the credentials to use when accessing Cloudify. Parameters' expansion is supported when using freestyle jobs.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tenant : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Cloudify tenant to operate on. If left empty, then the default tenant (defined in the plugin's configuration page) will be used.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • deleteComponents
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • nexusInstanceId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tagName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Components associated with this tag will be deleted
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • deleteCloudifyEnv
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Deletes a Cloudify environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The ID of the credentials to use when accessing Cloudify. Parameters' expansion is supported when using freestyle jobs.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • debugOutput : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If checked, then printed Cloudify events and logs will include debug-level records.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • deleteBlueprintIfLast : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If checked, and this is the last environment for the associated blueprint, then also delete the blueprint.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • deploymentId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ignoreFailure : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If checked, then failures during the removal of the environment will be ignored.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • skipUninstall : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Only delete the Cloudify deployment; skip running the uninstall workflow.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tenant : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Cloudify tenant to operate on. If left empty, then the default tenant (defined in the plugin's configuration page) will be used.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'DeleteEnvironmentBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • systemId : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • environmentName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'DeleteRaw'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • deleteAllStatus
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • resourceName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • resourceType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • clusterName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • resourceName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'DeleteVirtualizeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • serverType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • serverHost : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • serverName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • dependencyCheck
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • additionalArguments : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • odcInstallation : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • skipOnScmChange : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • skipOnUpstreamChange : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'DeployApplication'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This plugin creates a container on the OpenShift PaaS and deploys the application into the container.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • serverName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Select the a server from the list of servers configured in Jenkins Global Configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • appName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Select a name for the application. If the application doesn't exist, it will be created before the deployment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • cartridges : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify a space delimited list of cartridges to be assigned to the application. e.g. jbosseap-6 mysql-5.5

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Note that the specified cartridges need to be available on the selected OpenShift server. For a complete list of available cartridges on OpenShift refer to OpenShift web console or use the command line too 'rhc cartridges'. Here is the list of some of the most common cartridges:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • jbossas-7
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • jbosseap-6
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • nodejs-0.10
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • perl-5.10
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • php-5.3
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • php-5.4
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • zend-6.1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • python-2.6
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • python-2.7
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • python-3.3
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ruby-1.8
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ruby-1.9
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ruby-2.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • jbossews-1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • jbossews-2.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • 10gen-mms-agent-0.1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • mongodb-2.4
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • mysql-5.1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • mysql-5.5
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • phpmyadmin-4
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • postgresql-8.4
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • postgresql-9.2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • domain : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Select the user domain for the application. Note that the domain needs to be created before hand. The plugin will not create it if it doesn't exist.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • gearProfile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Select the gear profile to be used when creating the application
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • deploymentPackage : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The location of the deployment package can be specified as a directory path or a URL (e.g. to Nexus). The packages can be of type .WAR or .EAR in case of GIT deployment and .TAR.GZ archive for BINARY deployment. Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • target/
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • http://www.myrepo.com/org/keycloak/keycloak-server/1.0.2.Final/keycloak-server-1.0.2.Final.war
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • https://repository.jboss.org/nexus/service/local/artifact/maven/redirect?r=central&g=org.keycloak&a=keycloak-server&v=1.0.2.Final&e=war

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        In case of URL or when only one deployment package exists in the given directory, the package is deployed under the root ("/") context. When multiple packages are found, all are deployed under their own context paths.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Token macro expressions can be used for specifying a URL:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        https://repo/nexus/service/local/artifact/maven/redirect?r=central&g=${ENV,var="GROUPID"}&a=${ENV,var="ARTIFACTID"}&v=${ENV, var="VERSION"}&e=war

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Check Token Macro Plugin for further details.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • environmentVariables : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify a space delimited list of environment variables (key=value) to be assigned to the application. e.g. LOAD_DATA=true MVN_DEPLOY=true

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • autoScale : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • deploymentType
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Type of deployment the application accepts ('git' or 'binary')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Values: GIT, BINARY
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • openshiftDirectory : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The .openshift directory is a directory where a user can create action hooks, set markers, and create cron jobs. Check OpenShift User Guide for further details.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'DeployBox'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • id : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • cloud : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workspace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The workspace in ElasticBox to look for box to launch.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • box : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The box in the selected workspace to launch.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • boxVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The version of the selected box. If Latest is selected then the version will be the box itself or the last version depending on how the box is shared in the selected workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • instanceName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • profile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • claims : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • provider : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • location : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • instanceEnvVariable : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Define an environment variable for the instance deployed by this build step. The variable will hold the instance ID.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Additional instance properties will also be available via other environment variables that have the defined variable as prefix of their name. For example, if INSTANCE is specified for this field then the following environment variables are available:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          INSTANCE - ID of the deployed instance
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          INSTANCE_URL - URL of the deployed instance
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          INSTANCE_SERVICE_ID - service ID of the deployed instance
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          INSTANCE_TAGS - comma-separate list of tags of the deployed instance
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If 1 is specified for Number of Instances then the following environment variables are available:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          INSTANCE_MACHINE_NAME - VM name of the deployed instance
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          INSTANCE_PUBLIC_ADDRESS - VM public address of the deployed instance
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          INSTANCE_PRIVATE_ADDRESS - VM private address of the deployed instance
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If Number of Instances is greater than 1, the following environment variable are available:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          INSTANCE_MACHINE_NAMES - space-separate list of VM names
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          INSTANCE_PUBLIC_ADDRESSES - space-separate list of public addresses of the VMs
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          INSTANCE_PRIVATE_ADDRESSES - space-separate list of private addresses of the VMs

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tags : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Comma-separate tags to be added to the instance. These tags will be used to look up for the instance to determine whether the instance already exists. Build parameters or environment variables can be specified in tag with the format ${VARIABLE_NAME}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • variables : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • expiration
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Select whether the deployed instance will be expired via termination or shutdown in a specific number of hours from now or at a specific date and time in the future.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'AlwaysOn'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ShutDown'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • hours : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • date : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Date in format MM/dd/yyyy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • time : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Time in format HH:mm with hour from 00 to 23
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Terminate'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • hours : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • date : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Date in format MM/dd/yyyy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • time : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Time in format HH:mm with hour from 00 to 23
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • autoUpdates : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • alternateAction : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • waitForCompletion : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • waitForCompletionTimeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Timeout in minutes to wait for this Deploy Box build step to complete. This field is ignored if Wait for completion is unchecked.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • boxDeploymentType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • samDeploy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • settings
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • region : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • s3Bucket : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The name of the S3 bucket where this command uploads the artifacts that are referenced in your template.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            S3 bucket will be created automatically if it does not exist.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • stackName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The name of the AWS SAM stack you're deploying to. If you specify an existing stack, the command updates the stack. If you specify a new stack, the command creates it.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • templateFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The path, relative to the workspace directory, where your AWS SAM template is located.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            template.yaml
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            app/template.json
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • kmsKeyId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The ID of an AWS KMS key that the command uses to encrypt artifacts that are at rest in the S3 bucket. If not specified, SSE-AES256 is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • outputTemplateFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The path to the file (relative to the workspace directory) where the build step writes the output AWS SAM template.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            template-#jobId.yaml by default.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • parameters (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            A list of key-value pairs that specify input parameters for the change set.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • key : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • roleArn : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that AWS SAM assumes when executing the change set.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • s3Prefix : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            A prefix name that the command adds to the artifacts' name when it uploads them to the S3 bucket. The prefix name is a path name (folder name) for the S3 bucket.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tags (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            A list of tags to associate with the stack that is created or updated. AWS SAM also propagates these tags to resources in the stack.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • key : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • crxDeploy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Deploy CRX Content Package files from the workspace to a configured Adobe Granite repository via the CRX Package Manager.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Only package files with .zip or .jar extensions will be identified and deployed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • packageIdFilters : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specify a list of package ID filters and path filters to match against identified Vault packages located in the workspace. Each filter string must occupy its own line.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          A Package ID consists of the group, the name, and the version of a package, separated by colons (':').
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Package ID filters must follow one of three patterns:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • group:name:version
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • group:name
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • name
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Each segment in the package ID filter may be either ommitted or replaced with an asterisk ('*') to represent a wildcard.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          This step now supports path filters as well. A path filter is a path suffix relative to the localDirectory ending in '.zip' or '.jar', which may include '**', '*', and '?' wildcard characters.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For example, this pattern will match all zip files under the Local Directory:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  **/*.zip
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          This pattern will only match packages located directly under the Packages folder whose filenames begin with 'acme-':

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Packages/acme-*.zip
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Matching packages will be uploaded in the order in which the filters are specified. Only the highest matching version of a package identified by 'group:name' will be deployed, and it will only be deployed once per build step, regardless of the number of matching filters.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          This field supports parameter tokens.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • baseUrls : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specify the base URL of the Adobe Granite server, including hostname and port. The CRX Package Manager service path will be appended to this value for all requests. For example, http://localhost:4502 or https://author.mycorp.com, etc.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Multiple urls can be specified, one per line. All specified packages will be deployed to one server before beginning deployments to the next one.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If login credentials for one of the servers are different than those configured in the Connection Options section, you may override them in the Base URL by inserting username[:password]@ between the scheme and the hostname.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For example, to override the Username without changing the associated password or private key, you may use the following form:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          http://deployer@localhost:4502

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          To override the credentials completely, provide a username and password (which may be provided by an encrypted parameter) by separating them with a colon, as shown below:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          http://deployer:Password123@localhost:4502

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          This field supports parameter tokens.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • acHandling : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Change the way content ACL's included in the package filter scope are handled during installation.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Defer to Package
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Allow package to specify AC Handling mode. (This can be dangerous. Consider using a Validate CRX Content Packages step to check packages for destructive AC Handling rules before you deploy them.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Ignore
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Ignores the packaged access control and leaves the target unchanged.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          MergePreserve
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Merge access control in the content with the one provided with the package by adding the access control entries of principals not present in the content (i.e. content first). It never alters access control entries already existing in the content.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Merge
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Merge access control provided with the package with the one in the content by replacing the access control entries of corresponding principals (i.e. package first). It never alters access control entries of principals not present in the package.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Overwrite
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Applies the access control provided with the package to the target. This also removes existing access control.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Clear
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Clears all access control on the target system.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • autosave : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specify the number of changes to batch before saving the JCR session during package installation.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • behavior : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specify the behavior when a package exists on the target server that has the same package ID as one you are trying to deploy.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Select the login credentials with which content packages will be deployed to the CRX server.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          [Signature] credentials may be used if the target server supports HTTP Signature Authentication using the keyId format, /$username/keys/$fingerprint.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Select "-none-" to use the default credentials set in the global CRX Content Package Deployer - HTTP Client configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • disableForJobTesting : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Check this box to disable package deployment during Jenkins Job testing. For example, it is often necessary to test changes to artifact resolution configuration or to test Vault package identification. By checking this box, you can be sure that no installation will occur on any Granite server, and you will also see additional debug messaging in the console log describing the results of identification of Vault packages in the workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • localDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specify a path relative to the workspace in which to scan for packages.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          This field supports parameter tokens.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • recursive : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Check this box to install any sub-packages along with the deployed package.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • replicate : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Check this box to replicate each package after installation. This will not be attempted if the package installation fails, and only packages which have actually been installed by this step (rather than simply uploaded or skipped) will be replicated. This happens asynchronously, so you won't really know if the replication was successful or not unless you manually check your replication agent logs. For this reason, it might be better instead to deploy to each replication target directly.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • requestTimeout : long (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specify the timeout in milliseconds to wait for a response for each individual request. Specify a value of 0 to use default behavior.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • serviceTimeout : long (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specify the timeout in milliseconds to wait for PackageManager service availability between sending POST requests. Specify a value of 0 to use default behavior.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • waitDelay : long (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specify a delay in milliseconds before calls to check for Package Manager service availability. Increase this value if a /crx/packmgr node is sometimes created in the repository by this step, indicating that the Package Manager servlet was brought down for bundle installation AFTER a successful check for service availability, but BEFORE the next POST request was sent. What happens is that the SlingPostServlet takes over when the crx-packagemgr bundle is refreshed and creates nodes for any POST requests that it handles. Increasing this delay gives more time for the bundle refresh process to begin on the server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'DeployPromotionBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • hosts
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Type: com.cloudbees.plugins.deployer.hosts.DeployHost<?, ?>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'DeployScriptBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Execute any arbitrary SQL script on a selected database.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • out : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specify full path to target connection file.



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          File location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • in : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specify path to file that contains SQL script.



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          File location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildMasterDeployBuildToStage

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Deploys (or re-deploys) a build to a particular stage.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Note: that when used in a pipeline step that the applicationId, releaseNumber, and buildNumber fields are required:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        buildMasterDeployBuildToStage(applicationId: BUILDMASTER_APPLICATION_ID, releaseNumber: BUILDMASTER_RELEASE_NUMBER, buildNumber: BUILDMASTER_BUILD_NUMBER)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • applicationId : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The identifier of the BuildMaster application to trigger the build for.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Options are:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • The BUILDMASTER_APPLICATION_ID variable populated by a previous step
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • An application id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • An application name
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • releaseNumber : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The BuildMaster release number to trigger the build for. Options are:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • BUILDMASTER_RELEASE_NUMBER: variable populated by a previous step
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Latest Active Release: will automatically get the latest active release number from BuildMaster for the selected application
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • [Release Number]: a release number from the list of active releases

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The job will fail if there is no active BuildMaster release.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • buildNumber : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The BuildMaster build number to trigger the deployment for.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The must be set to an existing build number. Typically this would be obtained from the output of the createBuild step which populates the BUILDMASTER_BUILD_NUMBER environment variable.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • force : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Force deployment into the stage, even if a previous stage has failed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • printLogOnFailure : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If checked will print the BuildMaster log for the deployment to the Jenkins console if the build fails - but only if the "Wait until deployment completed" option is also checked.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • stage : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Optional. If not supplied, the next stage in the pipeline will be used.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • variables : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Set deployment level variables.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • waitUntilCompleted : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If checked waits until BuildMaster has completed the deployment, otherwise will exits immediately after triggering the deployment. Defaults to checked.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Deployer'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • stack : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The GitHub repository where the stack is stored, in the form <owner>/<name> (no spaces!).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • dryRun : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Whether to deploy in dry-run mode.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • branch : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The repository branch to deploy.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • apiKey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The Stack Hammer API key, copied from the stack settings dialog in the Stack Hammer user interface.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • addDeployToDashboard
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • env : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • buildNumber : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'DeploymentBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Enter the Convertigo server url here. COnvertigo server url is in this form
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          http://<server>:<port>/convertigo
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • userId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Enter the Convertigo server administration console userid here..
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • password : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Enter the Convertigo server administration console password here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • enableZipFile : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • enableAutoDeploy : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • enableTestCase
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • testcaseblock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projectname : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Select in this list here a project name you want to test. This list is retrieved from the target Convertigo server each time you add a new Test block.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • testcasename : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Select in this list here a test case you want to run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • xpath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              By clicking the Execute Testcase button you will have the data resulting from a testcase. Reading this data you will be able to enter assertions in this text box your assertions. Supported Syntax is :
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • assert ok
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                xpath expression1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                xpath expression2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                ...
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                xpath expressionn
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • assert nok
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                xpath expression1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                xpath expression2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                ...
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                xpath expressionn
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              All Xpath expressions below assert ok must match to have this test to be a success.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              One Xpath expressions below assert nok must match to have this test to be a failure.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              You can test you assertions by clicking the Validate XPath button. The test result will display beneath this text box.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'DescribeWithParamsBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • starter : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Do you want to show the name of the starter?
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • separator : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Line end separator for your "Markup Formatter" setting.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For example, "" for "Plain text", and "<br>" for "Safe HTML".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The parameters that you want to hide, separated by ";".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'DescriptionSetterBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This plugin automatically sets a description for the build as a step during building.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        A description can be based on the log output (by searching it using a regular expression), or it can be hardcoded.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The description is exposed as DESCRIPTION_SETTER_DESCRIPTION environment variable

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If configured, the regular expression will be applied to each line in the build log. A description will be set based on the first match.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          To select the version of a Maven release, you can use this regular expression:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \[INFO\] Uploading project information for [^\s]* ([^\s]*)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • description : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The description to set on the build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • If a regular expression is configured, every instance of \n will be replaced with the n-th group of the regular expression match.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • If the description is empty, the first group selected by the regular expression will be used as description.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • If no regular expression is configured, the description is taken verbatim.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'DevOpsCreateArtifactPackageBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Collection of artifact versions used as input to a CD pipeline, or for associating test results.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • artifactsPayload : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          ArtifactPayload
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          "name" --> Artifact name for which different builds (artifact versions) are generated.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          "version" --> Specific version of the artifact. Deployable component of an application generated by a CI build. When provided, semantic version is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          "semanticVersion" --> Optional attribute of an artifact version that, when provided, is used to determine commits for a change. Semantic version format is (MAJOR.MINOR.PATCH).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          "repository" --> Target for artifacts generated in a build, and also a source of artifacts required by a build.


                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          {"artifacts":[{"name": "sa-web.jar", "version": "1.9", "repositoryName": "services-1031"}, {"name": "sa-db.jar", "version": "1.3.2", "repositoryName": "services-1032"}], "branchName": "master"}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'DevOpsRegisterArtifactBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • artifactsPayload : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          ArtifactPayload
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          "name" --> Artifact name for which different builds (artifact versions) are generated.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          "version" --> Specific version of the artifact. Deployable component of an application generated by a CI build. When provided, semantic version is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          "semanticVersion" --> Optional attribute of an artifact version that, when provided, is used to determine commits for a change. Semantic version format is (MAJOR.MINOR.PATCH).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          "repository" --> Target for artifacts generated in a build, and also a source of artifacts required by a build.


                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          {"artifacts":[{"name": "sa-web.jar", "version": "1.9", "repositoryName": "services-1031"}, {"name": "sa-db.jar", "version": "1.3.2", "repositoryName": "services-1032"}], "branchName": "master"}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • devSpacesCreate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • azureCredentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • aksName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • kubeconfigId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • resourceGroupName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sharedSpaceName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The name of the parent dev space of the current dev space.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • spaceName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • svCreateAndDeployVirtualService

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Create and deploy Virtual Service from VSI/VSM, RR Pairs, or the following specifications: Swagger, WSDL, or RAML.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useCustomRegistry : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Set to true to override the default global connection setting to CA DevTest registry for the particular project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • host : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The correct hostname or registry name needs to be entered
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • port : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Enter the port on which the registry is running. The default port is 1505. If you changed it, you can find the port in the LISA properties file as lisa.webserver.port followed by the port number
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • vseName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Use the name of the VSE to which you want this build step to apply
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • config : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Configuration JSON

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Example of using a configuration object that includes port and SSL information

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          { "virtualService": { "version": "2", "name": "API_Test_1", "description": "Invoke API V2", "status": "" }, "transportProtocol": { "typeId": "HTTP", "basePath": "/", "useGateway": true, "duptxns": true, "hostHeaderPassThrough": false }, "dataProtocol": { "forRequest": true, "typeId": "RESTDPH" } }

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • deploy : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If true will atomically deploy the newly created virtual service on to the VSE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • undeploy : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If selected will undeploy virtual service if it exists on Virtual Service Environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • inputFile1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Path to input file that will be uploaded to the VSE. The input file can be Request/Response (file or zip), VSM/VSI, Swagger, RAML, or WADL file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Possibilities:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          for files in job workspace you can specify:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • relative path to input file in job workspace (example: dir/test-req.txt)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          for files on the DevTest machine you can specify:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • absolute path to file (example: file:///C:/something/test-req.txt)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • http location of input file (example: http://something/test-req.txt)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • inputFile2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Path to input file that will be uploaded to the VSE. The input file can be Request/Response or VSM/VSI file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Possibilities:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          for files in job workspace you can specify:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • relative path to input file in job workspace (example: dir/test-rsp.txt)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          for files on the DevTest machine you can specify:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • absolute path to file (example: file:///C:/something/test-rsp.txt)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • http location of input file (example: http://something/test-rsp.txt)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • activeConfig : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Path to active project config file that will be uploaded to the VSE.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Possibilities:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          for files in job workspace you can specify:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • relative path to input file in job workspace (example: dir/project.config)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          for files on the DevTest machine you can specify:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • absolute path to file (example: file:///C:/something/project.config)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • dataFiles : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Path to data file that will be uploaded to the VSE. The input should be data file in one of the content type defined in <LISA_HOME>/contenttype.xml,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Possibilities:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          for files in job workspace you can specify:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • relative path to input file in job workspace (example: dir/data.csv)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          for files on the DevTest machine you can specify:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • absolute path to file (example: file:///C:/something/data.csv)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • swaggerurl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Swagger (OpenAPI) 2.0 or 3.0 document URL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ramlurl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          RAML 0.8 spec URL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • wadlurl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          WADL URL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tokenCredentialId : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The ID for the integration token from the Credentials plugin to be used to connect to Registry endpoint. The "Kind" of the credential must be "Username with password".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • secured : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Set to true if the CA DevTest API are set to accept only https connections
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • svDeployTest

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Deploys and starts CA DevTest test or test suite provided as a .mar file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Throws exception if .mar file is incorrect, authorization to CA DevTest fails or connection to CA DevTest cannot be established.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useCustomRegistry : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Set to true to override the default global connection setting to CA DevTest registry for the particular project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • host : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The correct hostname or registry name needs to be entered
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • port : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Enter the port on which the registry is running. The default port is 1505. If you changed it, you can find the port in the LISA properties file as lisa.webserver.port followed by the port number
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • marFilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Path to MAR file that will be uploaded to the VSE. Needs to be relative path to MAR file in job workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • testType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Choose whether mar file contains test or test suite.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tokenCredentialId : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The ID for the integration token from the Credentials plugin to be used to connect to Registry endpoint. The "Kind" of the credential must be "Username with password".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • secured : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Set to true if the CA DevTest API are set to accept only https connections
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • svDeployVirtualService

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Deploys and starts virtual service provided as a .mar file to target VSE. More services could be provided using comma or newline separator.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Throws exception if .mar file is incorrect, virtual service is already deployed, authorization to CA DevTest fails or connection to CA DevTest cannot be established.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useCustomRegistry : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Set to true to override the default global connection setting to CA DevTest registry for the particular project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • host : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The correct hostname or registry name needs to be entered
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • port : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Enter the port on which the registry is running. The default port is 1505. If you changed it, you can find the port in the LISA properties file as lisa.webserver.port followed by the port number
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • vseName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Use the name of the VSE to which you want this build step to apply
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • marFilesPaths : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Path to MAR file that will be uploaded to the VSE. The field supports multiple strings delimited by a separate line or comma.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Possibilities:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          for files in job workspace you can specify:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • relative path to MAR file in job workspace (example: dir/test.mar)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • path to MAR files using ant glob syntax (example: **/*.mar)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          for files on the DevTest machine you can specify:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • absolute path to file (example: file:///C:/something/test.mar)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • http location of MAR file (example: http://something/test.mar)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tokenCredentialId : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The ID for the integration token from the Credentials plugin to be used to connect to Registry endpoint. The "Kind" of the credential must be "Username with password".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • secured : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Set to true if the CA DevTest API are set to accept only https connections
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • svStartVirtualService

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Starts virtual service that is already deployed on target VSE. More services could be started using comma or newline separator.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Throws exception if virtual service does not exist on specified VSE, authorization to CA DevTest fails or connection to CA DevTest cannot be established.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useCustomRegistry : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Set to true to override the default global connection setting to CA DevTest registry for the particular project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • host : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The correct hostname or registry name needs to be entered
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • port : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Enter the port on which the registry is running. The default port is 1505. If you changed it, you can find the port in the LISA properties file as lisa.webserver.port followed by the port number
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • vseName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Use the name of the VSE to which you want this build step to apply
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • vsNames : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Names of Virtual Services existing on provided VSE delimited by a separate line or comma.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tokenCredentialId : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The ID for the integration token from the Credentials plugin to be used to connect to Registry endpoint. The "Kind" of the credential must be "Username with password".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • secured : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Set to true if the CA DevTest API are set to accept only https connections
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • svStopVirtualService

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Stops virtual service that is running on target VSE. More services could be stopped using comma or newline separator.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Throws exception if virtual service is not running on specified VSE, authorization to CA DevTest fails or connection to CA DevTest cannot be established.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useCustomRegistry : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Set to true to override the default global connection setting to CA DevTest registry for the particular project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • host : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The correct hostname or registry name needs to be entered
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • port : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Enter the port on which the registry is running. The default port is 1505. If you changed it, you can find the port in the LISA properties file as lisa.webserver.port followed by the port number
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • vseName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Use the name of the VSE to which you want this build step to apply
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • vsNames : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Names of Virtual Services existing on provided VSE delimited by a separate line or comma.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tokenCredentialId : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The ID for the integration token from the Credentials plugin to be used to connect to Registry endpoint. The "Kind" of the credential must be "Username with password".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • secured : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Set to true if the CA DevTest API are set to accept only https connections
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • svUndeployVirtualService

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Undeploys (removes) virtual service from specified VSE. More services could be provided using comma or newline separator.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Throws exception if virtual service does not exist on specified VSE, authorization to CA DevTest fails or connection to CA DevTest cannot be established

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useCustomRegistry : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Set to true to override the default global connection setting to CA DevTest registry for the particular project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • host : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The correct hostname or registry name needs to be entered
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • port : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Enter the port on which the registry is running. The default port is 1505. If you changed it, you can find the port in the LISA properties file as lisa.webserver.port followed by the port number
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • vseName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Use the name of the VSE to which you want this build step to apply
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • vsNames : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Names of Virtual Services existing on provided VSE delimited by a separate line or comma.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tokenCredentialId : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The ID for the integration token from the Credentials plugin to be used to connect to Registry endpoint. The "Kind" of the credential must be "Username with password".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • secured : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Set to true if the CA DevTest API are set to accept only https connections
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • importDeveloperProfile
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • importIntoExistingKeychain : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • keychainId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • keychainName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • keychainPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • keychainPwd (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • profileId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'DiawiUploader'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • fileName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • proxyHost : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • proxyPort : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • proxyProtocol : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • dingtalk
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • robot : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • at : Array / List of String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • atAll : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • btnLayout (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Values: H, V
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • btns (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • title : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • actionUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • hideAvatar : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • messageUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • picUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • singleTitle : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • singleUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • text : Array / List of String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • title : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • type (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Values: TEXT, LINK, MARKDOWN, ACTION_CARD
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DistTestingBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The goal of this plugin is to enable a distributed testing of some compiled classes on multiple nodes. Tests are send one by one to nodes in the label specified for the project and run. Test results are saved in the "results" directory in the project workspace. f.e. "TEST-helloword.HelloTest.xml" for the test class "helloworld.HelloTest".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This plugin suppose that all slaves in the specified label have a shared workspace directory. (like NFS)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Only classes in the "Tests classes directory" directory with a file name containing a "test" substring (case insensitive) are automatically found by this plugin and run.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If you enable "Publish JUnit test result report" in the "Post-build Actions" section and type "results/*.xml" you will see test results in the Hudson's web UI.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Only nodes in a label which were specified for this project ("Tie this project to a node") will be used for distributed testing. This label must contain at least 2 nodes.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            It's possible let this plugin to compile tests class sources which were checkout from a repository if "Compile tests" checkbox was checked. Remember to provide all necessary libraries needed for compilation.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            It's possible to check a "Wait for nodes which are busy" checkbox to wait for other nodes which are busy to be freed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • distLocations
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • distDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • libLocations
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • libDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • testDir : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This specifies a relative path in the project workspace where compiled tests resides. For example if tests are in build/test/classes then type "build/test/classes". In case you check "Compile tests" checkbox this relative path will be used for storing compiled tests classes which were before check-out from a repository.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • waitForNodes : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Wait for modes in the label which are now occupied by some other builds. This doesn't wait for nodes which are offline

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • compileTests : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If checked then all source codes in the "Tests classes directory" will be compiled. It's necessary to provide all libraries for compilation. Compiled tests will be saved into the directory "tests".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DockerBuilderControl'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • option
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'DockerBuilderControlOptionProvisionAndStart'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • cloudName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • templateId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'DockerBuilderControlOptionRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • cloudName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • image : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • pullCredentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • dnsString : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • network : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • dockerCommand : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • mountsString : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • volumesFrom : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • environmentsString : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • hostname : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • user : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • extraGroupsString : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • memoryLimit : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • memorySwap : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • cpuPeriod : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • cpuQuota : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • cpuShares : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • shmSize : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • bindPorts : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • bindAllPorts : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • privileged : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tty : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • macAddress : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'DockerBuilderControlOptionStart'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • cloudName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • containerId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'DockerBuilderControlOptionStop'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • cloudName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • containerId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • remove : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'DockerBuilderControlOptionStopAll'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • remove : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DockerBuilderNewTemplate'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Adds specified image configuration to all Docker Clouds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • dockerTemplate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • dockerTemplateBase
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'DockerTemplateBase'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • image : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The hash or tagged name of the image that you wish docker to run (e.g "docker run -i -t <id> /bin/bash")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • bindAllPorts : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • bindPorts : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Bind ports from inside the container to outside of the host, scheme is hostport:containerport. Same effect as the "-p" or "-P" option on the CLI. Docker documentation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • capabilitiesToAddString : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    A list of new line separated capabilities.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Each line represents an option for the --cap-add parameter sent to the docker server. Each one must be a known capability "Key" as per the docker documentation.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Please check https://docs.docker.com/engine/reference/run/#runtime-privilege-and-linux-capabilities for further information.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • capabilitiesToDropString : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    A list of new line separated capabilities.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Each line represents an option for the --cap-drop parameter sent to the docker server. Each one must be a known capability "Key" as per the docker documentation.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Please check https://docs.docker.com/engine/reference/run/#runtime-privilege-and-linux-capabilities for further information.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • cpuPeriod : long (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Set the period of CPUs to limit the container’s CPU usage.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The default CPU CFS (Completely Fair Scheduler) period is 100000us.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Consult Docker Run Documentation for further information.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • cpuQuota : long (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Limits the container’s CPU usage.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The default 0 value allows the container to take 100% of a CPU resource.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Consult Docker Run Documentation for further information.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • cpuShares : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Similarly the operator can increase the priority of this container. By default (no value), all containers run at the same priority and get the same proportion of CPU cycles, but you can tell the kernel to give more shares of CPU time to one or more containers when you start them via Docker.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Consult Docker Run Documentation for further information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • devicesString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    New line separated list of devices to be mapped (e.g: /dev/fuse). The full scheme is origin:destination:permissions, although just specifying the origin is enough. Docker documentation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • dnsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Set the DNS servers to use within your images, if not set Docker will use DNS settings of the host
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • dockerCommand : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Specifies a command to be executed upon containter start. Note this setting might have impact on the Launch mechanism, for example SSH Launcher do configure sshd with injected keys authentication, overriding this command might prevent the agent to start. Please refer to docker documentation for more details.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Supplied command must keep the container running, so Jenkins can establish a remote connection at any time. If not set, Jenkins will configure a general purpose command to just wait for stdin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If you need your image to start some additional services, you should consider using an Entrypoint, and follow best practices so that the command is eventually executed by your entrypoint script.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • environmentsString : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Zero or more environment variables that are set within the docker container. This is a multi-line text field. Each line must be of the form key=value and specify one variable name and its value.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Note that quotes are not interpreted.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    e.g. foo="bar" will result in the quotes being part of foo's value.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Note also that whitespace is easily broken. Editing this field this without first expanding the box to its multi-line form will cause any whitespace within a line to be turned into end of line codes, breaking up the line and thus changing its meaning.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    e.g. The single setting:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     JENKINS_SLAVE_SSH_PUBKEY=ssh-rsa MyPubKey jenkins@hostname
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    can be (accidentally) turned into three separate settings:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     JENKINS_SLAVE_SSH_PUBKEY=ssh-rsa MyPubKey jenkins@hostname
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    thus preventing the configuration from working as was intended.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • extraDockerLabelsString : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    A list of new line separated docker labels to be set on the container, Specified in the form "label_name=value".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This has no effect on Jenkins functionality, and is not related to the labels used by Jenkins to map jobs to agent nodes. These labels are metadata attached to the docker container itself (again, not the jenkins agent), and which can typically be read using the docker inspect command.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This can be useful when using a docker cluster (like docker swarm) to pass information to the scheduler, in conjunction with constraints; or to let other services (portainer, prometheus...) know how they should categorize or otherwise deal with this specific container.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Notes:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • spaces are the beginning and end of the label name and value will be removed
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • invalid lines will be ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • extraGroupsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Run a container with the specified additional groups (e.g. "docker run --group-add ...").
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Refer to the docker run command reference for the correct syntax.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • extraHostsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    A list of new line separated hostnames/IP mappings to be added to the container’s /etc/hosts file. Specified in the form "hostname:IP".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • hostname : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • macAddress : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Container MAC address (e.g. 92:d0:c6:0a:29:33)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • memoryLimit : int (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The operator can constrain the memory available to a container. If the host supports swap memory, then the setting can be larger than physical RAM.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    When the processes inside the container exceed the memory limit, effects vary depending on your setup, e.g. out of memory errors may occur or the operating system could start killing processes.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Consult Docker Run Documentation for further information.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Note that on most Docker installations, the memory limit will not stop Jenkins/Docker from spawning so many containers that the machines total available memory will be exceeded. However, some Docker installations might be able to constrain the number of containers automatically using the memory limit.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • memorySwap : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The operator can constrain the swap memory available to a container. This value is the total memory available to the container (swap + memory). To disable swap limit, you can set it to "-1".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Consult Docker Run Documentation for further information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • mountsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    New line separated list of host mounts : type=volume|bind|tmpfs|npipe[,src|source=<some source>],dst|destination|target=<some target>[,<key>=<value>]*
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    See the official documentation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • network : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • privileged : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • pullCredentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • securityOptsString : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    A list of new line separated security options.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Each line represents an option for the --security-opt parameter sent to the docker server. The options are in the format key=value.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Please check https://docs.docker.com/engine/reference/run/#security-configuration for further information.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • shmSize : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Size of /dev/shm in MB. If you omit the size entirely (or use the value 0), the system uses 64 MB.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Consult Docker Run Documentation for further information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • tty : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • user : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Run a container with the specified user (e.g. "docker run --user ...").
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Refer to the docker run command reference for the correct syntax. Note that you have to specify a numeric uid if you want to run a container as a user, which exists on the host machine but does not exist within the container.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • volumesFromString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    New line separated list of volumes to inherit from another container. Specified in the form <container name>[:<ro|rw>]
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If accessmode not specified, then default rw will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • connector

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For all connection methods, Jenkins will start by triggering a docker run. Then, after this step, there will optionally be more steps to establish the connection. There is currently three alternative ways to connect your Jenkins master to the dynamically provisioned Docker agents.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                There are different pros and cons for each connection method. Depending on your environment, choose the one matching your needs. More detailed prerequisites are provided once you select a given method.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Attach Docker container
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                This method runs a container, then connects to it using docker exec, all by using the Docker API. The agent does not need to be able to reach the master through the network layers to communicate ; all will go through Docker API.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Connect with JNLP
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The container will only be passed an initial docker run command with the right secret. And the remoting agent will establish the connection with the master through the network. Hence, the agent must be able to access the master through its address and port.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Connect with SSH
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The specified image is expected to run an SSH server. Then, it will treat that computer like it usually does for any SSH connected agent: the master will log into it, copy the remoting agent, then start it.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • attach
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • entryPointCmdString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • javaExe : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • jvmArgsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • user : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    User that the Jenkins agent code will run as.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The container's default user (typically "root") will be used if this is left blank.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • jnlp
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • jnlpLauncher
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • jnlp
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tunnel : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • webSocket : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Use WebSocket to connect to the Jenkins master rather than the TCP port. See JEP-222 for background.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workDirSettings (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • disabled : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Allows disabling Remoting Work Directory for the agent. In such case the agent will be running in the legacy mode without logging enabled by default.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • workDirPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If defined, a custom Remoting work directory will be used instead of the Agent Root Directory. This option has no environment variable resolution so far, it is recommended to use only absolute paths.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • internalDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Defines a storage directory for the internal data. This directory will be created within the Remoting working directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • failIfWorkDirIsMissing : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If defined, Remoting will fail at startup if the target work directory is missing. The option may be used to detect infrastructure issues like failed mount.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • entryPointArgumentsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • jenkinsUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If needed, the Jenkins URL can be overwritten with this property (e.g. to support other HTTP(S) endpoints due to reverse proxies or firewalling). By default the URL from the global Jenkins configuration is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • user : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    User that the jenkins agent process will be run as. "root" if not specified.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ssh
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • sshKeyStrategy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Define how a SSH key pair is configured for ssh authentication in container.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'InjectSSHKey'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • user : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Injected SSH key will let agent start as root in container. If you want to use another user configure it's name here. Please note such a user must pre-exist in container image.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ManuallyConfiguredSSHKey'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sshHostKeyVerificationStrategy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'KnownHostsFileKeyVerificationStrategy'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Checks the known_hosts file (~/.ssh/known_hosts) for the user Jenkins is executing under, to see if an entry exists that matches the current connection.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          This method does not make any updates to the Known Hosts file, instead using the file as a read-only source and expecting someone with suitable access to the appropriate user account on the Jenkins controller to update the file as required, potentially using the ssh hostname command to initiate a connection and update the file appropriately.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ManuallyProvidedKeyVerificationStrategy'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Checks the key provided by the remote host matches the key set by the user who configured this connection.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • key : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The SSH key expected for this connection. This key should be in the form `algorithm value` where algorithm is one of ssh-rsa or ssh-dss, and value is the Base 64 encoded content of the key.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ManuallyTrustedKeyVerificationStrategy'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Checks the remote key matches the key currently marked as trusted for this host.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Depending on configuration, the key will be automatically trusted for the first connection, or an authorised user will be asked to approve the key. An authorised user will be required to approve any new key that gets presented by the remote host.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • requireInitialManualTrust : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Require a user with Computer.CONFIGURE permission to authorise the key presented during the first connection to this host before the connection will be allowed to be established.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If this option is not enabled then the key presented on first connection for this host will be automatically trusted and allowed for all subsequent connections without any manual intervention.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NonVerifyingKeyVerificationStrategy'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Does not perform any verification of the SSH key presented by the remote host, allowing all connections regardless of the key they present.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • javaPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • jvmOptions : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • launchTimeoutSeconds : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • maxNumRetries : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The number of times that attempts to connect to the newly-spun Docker container will be retried before the operation is abandoned.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Note: That this field applies first to checks that the SSH port is open for new TCP connections, and secondly to checks that the SSH service that owns the TCP port is accepting SSH connections.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        e.g. a value of 3 would mean that (up to) 4 attempts (1 initial attempt plus 3 retries) would be made to check the availability of the TCP port, followed by (up to) 4 attempts (1 initial attempt plus 3 retries) to check the availability of the SSH service itself.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • port : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • prefixStartSlaveCmd : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • retryWaitTime : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Number of seconds to wait between attempts to connect to the newly-started Docker container.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • suffixStartSlaveCmd : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • labelString : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Labels to give these nodes (for limiting your builds)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • instanceCapStr : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The maximum number of containers, based on this template, that this provider is allowed to run in total. A negative value, or zero, or 2147483647 all mean "no limit" is imposed on the this template, although the overall cloud instance limit (if any) will still apply.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Note that containers which have not been created by Jenkins are not included in this total.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    As an alternative, some Docker setups can also determine the maximum number of containers automatically using memory/cpu constraints.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • disabled (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • disabledByChoice : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • enabledByChoice : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If not ticked then this functionality will be disabled.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This can be used to e.g. take a cloud or template out of action for maintenance etc.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Note: If problems are encountered then this functionality may be disabled automatically. If that happens then it will be shown here. In this situation, the disabled state is transient and will automatically clear after the stated period has elapsed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • mode (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Values: NORMAL, EXCLUSIVE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Name prefix to use for all the Jenkins nodes created from this template.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Jenkins will append a unique ID to this name in order to create individual node names.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If blank or just whitespace, a default of "docker" will be used.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • nodeProperties (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Type: ? extends hudson.slaves.NodeProperty<?>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • pullStrategy (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Pull strategy during provisioning before image run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Values: PULL_ALWAYS, PULL_LATEST, PULL_NEVER
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • pullTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Timeout, in seconds, to apply when expecting data from the Docker API when performing the docker pull operation. 0 means no time limit, but this is not recommended (if your docker API locks up, some aspects of Jenkins can also lock up).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    i.e. you probably want this set to as long as it takes to pull the entire image onto a fresh docker server. e.g. a few minutes.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Note: This overrides the read timeout specified for the cloud, but only for the docker pull operation (as this operation is expected to take longer than most docker operations).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • remoteFs : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Root directory within your image for the Jenkins user to use
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • removeVolumes : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Remove the volumes associated to the container during container remove.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • retentionStrategy (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Specify the strategy when docker containers shall be started and stopped:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Docker Once Retention Strategy (default)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    For each job in the queue, an own docker container is started. Once the job has finished, the container is shut down.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Docker Cloud Retention Strategy (experimental)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Based on the workload provided by the queue (load average), new docker containers are started on demand. After the job(s) have finished, the container is not shut down immediately. If no new job was executed on this agent/container during the period of the Idle delay, the container is shut down.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Keep this agent on-line as much as possible (experimental)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Starts as many containers as specified in the Instance Capacity (obeying the Container Cap) and tries to keep them always running (i.e. a new container is started in case another one belonging to this template was shut down).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Take this agent on-line according to a schedule (experimental)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Based on a cron-schedule agents are brought on-line and will keep running. Once the specified period in the schedule is over, the agents will be shut down.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Take this agent on-line when in demand and off-line when idle (experimental)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Containers are started if there are jobs waiting for execution in the queue. They are only started, if the jobs are waiting a certain threshold of time there (In demand delay). After the jobs have finished, the container is not shut down immediately. If no new job was executed on this agent/container during the period of the Idle delay, the container is shut down.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • idleMinutes : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Number of minutes of idleness after which to kill the agent; serves a backup in case the strategy fails to detect the end of a task
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • numberOfTasksInProgress : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • terminateOnceDone : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • stopTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Timeout, in seconds, to apply when stopping the container after a job has finished. The default of 10s is fine for most cases. However, if you container needs to do some cleanup after the agent has stopped you can increase the timeout. If the container fails to stop gracefully before the timeout ends, the container will be killed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'DockerBuilderPublisher'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Build step that sends a Dockerfile for building to docker host that used for this build run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • dockerFileDirectory : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • fromRegistry
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    URL to the Docker registry you are using. May be left blank to use the public DockerHub registry (currently https://index.docker.io/v1/).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • cloud : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Cloud to do the build on - or, if empty, use the cloud that the build was performed on.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tagsString : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Repository name (and optionally a tag) to be applied to the resulting image in case of success.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Multiple entries are permitted if separated by newlines.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Environment variable substitution is performed on the strings so you can use e.g. ${BUILD_NUMBER} as part of each entry.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Each entry must be of the form IMAGE[:TAG] as per the docker tag command.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • pushOnSuccess : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If enabled (and the docker image builds successfully), the resulting docker image will be pushed to the registry (or registries) specified within the "Image" field.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • pushCredentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Credentials to push to a private registry.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • cleanImages : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • cleanupWithJenkinsJobDelete : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • buildArgs (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  A map of build-time variables.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Type: java.util.Map<java.lang.String, java.lang.String>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • buildArgsString : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  A list of new line separated build-time variables, specified in the form "name=value".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • noCache : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If set, builds the image with --no-cache which disables caching of layers. See the docker build command for more information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • pull : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If set, builds the image with --pull to pull the latest version of the base image, instead of using the local one. See the docker build command for more information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'DockerComposeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • useCustomDockerComposeFile : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • dockerComposeFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • option
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ExecuteCommandInsideContainer'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • privilegedMode : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • service : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • index : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • workDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'StartAllServices'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'StartService'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • service : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • scale : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'StopAllServices'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'StopService'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • service : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'DockerPullImageBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • registry
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        URL to the Docker registry you are using. May be left blank to use the public DockerHub registry (currently https://index.docker.io/v1/).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • image : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Image ID on DockerHub. When set in combination with DockerHub trigger, a build will run when dockerhub builds a new image.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • dockerShell
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • connector (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'CloudNameDockerConnector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • cloudName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'DockerConnector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • serverUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The URL to use to access your Docker server API (e.g: http://172.16.42.43:4243 or unix://).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • apiVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Docker Daemon API version. Should be set when plugin underlying library can't connect to new daemon because docker daemon API become backward incompatible.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Version in format "1.22". Connector will append "/v${VERSION}" to api url for connector, where ${VERSION} is entered string. For details see docker_remote_api
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • connectTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Timeout for opening connection to Docker API. 0 is infinity.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Works only for Jersey.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • connectorType (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Docker-java provides different connection implementations based on different client libraries. In case you have some errors please try other.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Values: JERSEY, NETTY, OKHTTP
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • readTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Read timeout to Docker API. In seconds. 0 is infinity.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • containerLifecycle (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • createContainer (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • bindAllPorts : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • bindPorts : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Bind ports from inside the container to outside of the host, scheme is hostport:containerport. Same effect as the "-p" or "-P" option on the CLI. Docker documentation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • command : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The command to run for this image, replaced by Jenkins Launchers
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • cpuShares : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Similarly the operator can increase the priority of this container. By default (no value), all containers run at the same priority and get the same proportion of CPU cycles, but you can tell the kernel to give more shares of CPU time to one or more containers when you start them via Docker.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Consult https://docs.docker.com/engine/reference/run/#cpu-share-constraint for further information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • cpusetCpus : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • cpusetMems : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • devicesString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Add host device to container. For format please refer to Add host device to container (--device) documentation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • dnsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Set the DNS servers to use within your images, if not set Docker will use DNS settings of the host
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • dockerLabelsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • entrypoint : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • environmentString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • extraHostsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          A list of new line separated hostnames/IP mappings to be added to the container’s /etc/hosts file. Specified in the form "hostname:IP".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • hostname : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • linksString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Add link to another container. Only the form container:alias is supported (e.g. the_db_container:db).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Consult https://docs.docker.com/engine/userguide/networking/default_network/dockerlinks/#communication-across-links for further information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • macAddress : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Container MAC address (e.g. 92:d0:c6:0a:29:33)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • memoryLimit : long (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The operator can constrain the memory available to a container. If the host supports swap memory, then the setting can be larger than physical RAM.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Consult Docker Run Documentation for further information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • networkMode : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Set the Network mode for the container:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Empty: undefined, docker daemon defaults
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • 'bridge': creates a new network stack for the container on the docker bridge
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • 'none': no networking for this container
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • 'container:<name | id>': reuses another container network stack
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • 'host': use the host network stack inside the container. Note: the host mode gives the container full access to local system services such as D-bus and is therefore considered insecure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • privileged : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • restartPolicy (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • policyName
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Values: NO, UNLESS_STOPPED, ALWAYS, ON_FAILURE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • maximumRetryCount : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • shmSize : long (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tty : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • user : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • volumesFromString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          New line separated list of volumes to inherit from another container. Specified in the form <container name>[:<ro|rw>]
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If accessmode not specified, then default rw will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • volumesString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          New line separated list of host volume mounts : <host/path>[<container/path>[<:mode>]]
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • container/path create empty volume container/path
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • host/path:container/path will mount host/path from host to container's container/path, read/write
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • host/path:container/path:rw will mount host/path from host to container's container/path, read/write
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • host/path:container/path:ro will mount host/path from host to container's container/path, read-only
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Note: if access mode not specified, then default rw will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • workdir : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • image : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The hash or tagged name of the image that you wish docker to run (e.g "docker run -i -t /bin/bash")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • pullImage (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • connector (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CloudNameDockerConnector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • cloudName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DockerConnector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • serverUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The URL to use to access your Docker server API (e.g: http://172.16.42.43:4243 or unix://).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • apiVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Docker Daemon API version. Should be set when plugin underlying library can't connect to new daemon because docker daemon API become backward incompatible.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Version in format "1.22". Connector will append "/v${VERSION}" to api url for connector, where ${VERSION} is entered string. For details see docker_remote_api
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • connectTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Timeout for opening connection to Docker API. 0 is infinity.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Works only for Jersey.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • connectorType (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Docker-java provides different connection implementations based on different client libraries. In case you have some errors please try other.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Values: JERSEY, NETTY, OKHTTP
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • readTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Read timeout to Docker API. In seconds. 0 is infinity.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Credentials for pulling docker image. Supported only "Docker Registry Auth" type.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • pullStrategy (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Values: PULL_ALWAYS, PULL_ONCE, PULL_LATEST, PULL_NEVER
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • registriesCreds (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • registryAddr : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • removeContainer (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • force : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Force the removal of a running container (uses SIGKILL)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • removeVolumes : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Remove the volumes associated with the container
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • stopContainer (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • connector (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CloudNameDockerConnector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • cloudName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DockerConnector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • serverUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The URL to use to access your Docker server API (e.g: http://172.16.42.43:4243 or unix://).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • apiVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Docker Daemon API version. Should be set when plugin underlying library can't connect to new daemon because docker daemon API become backward incompatible.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Version in format "1.22". Connector will append "/v${VERSION}" to api url for connector, where ${VERSION} is entered string. For details see docker_remote_api
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • connectTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Timeout for opening connection to Docker API. 0 is infinity.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Works only for Jersey.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • connectorType (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Docker-java provides different connection implementations based on different client libraries. In case you have some errors please try other.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Values: JERSEY, NETTY, OKHTTP
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • readTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Read timeout to Docker API. In seconds. 0 is infinity.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Sending SIGTERM and then SIGKILL after a grace period
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • executorScript : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • longConnector (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'CloudNameDockerConnector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • cloudName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'DockerConnector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • serverUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The URL to use to access your Docker server API (e.g: http://172.16.42.43:4243 or unix://).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • apiVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Docker Daemon API version. Should be set when plugin underlying library can't connect to new daemon because docker daemon API become backward incompatible.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Version in format "1.22". Connector will append "/v${VERSION}" to api url for connector, where ${VERSION} is entered string. For details see docker_remote_api
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • connectTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Timeout for opening connection to Docker API. 0 is infinity.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Works only for Jersey.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • connectorType (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Docker-java provides different connection implementations based on different client libraries. In case you have some errors please try other.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Values: JERSEY, NETTY, OKHTTP
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • readTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Read timeout to Docker API. In seconds. 0 is infinity.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • shellScript : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'DoktorStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • server : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • markdownIncludePatterns
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • markdownExcludePatterns
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • asciidocIncludePatterns
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • asciidocExcludePatterns
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'DotNetCoreRunner'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • targetCode : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Your c# code to execute, the plugin will rebuild your code if detect some change. These are some examples of the target code for this plugin:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Simple example:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    //Simple Example
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    public class JenkinsPlugin
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        public static void ScriptMain()
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Console.WriteLine("Hello World from c#!!!");
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    } 

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Saving environment variables:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    // Complete example
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    using DotNetTools.Jenkins;
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    using System;
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    public class JenkinsPlugin
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        public static void ScriptMain(JenkinsManager manager)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Console.WriteLine("Hello World from c#!!!");
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            manager.SetSessionEnv("PI", Math.PI.ToString());
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    }

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • You can use this two methods from the DotNetTools.Jenkins.JenkinsManager class:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    public void SetSessionEnv(string key, string value);
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    public string GetSessionEnv(string key);

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • additionalPackages : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      A json object that represents the additional packages required to compile the c# code:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • { "Nancy": "2.0.0-clinteastwood", "System.ValueTuple": "4.3.0"}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • { "Nancy": null}

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Note that if you specify a null value for a package version then the latest one will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • downloadProgetPackage
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Downloads a universal ProGet package to specified folder and will optionally unpack it for you.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Download options are:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Package - Download ProGet universal package (ZIP file with extension of 'upack')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Content as ZIP - Download content as ZIP file
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Content as TGZ - Download content as TGZ file
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Unpack Content - Extract the package content once downloaded
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    In all cases except 'Unpack Content' the environment variable PROGET_FILE will be populated with the name of the downloaded file

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    See Inedo documentation.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • feedName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • groupName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • packageName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • version : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • downloadFormat : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • downloadFolder : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The folder to download the package to. The path can include environment variables in the format ${VAR} or $VAR.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If a full pathname is not supplied then the downloaded package 'should' end up in the workspace, but this is not guaranteed. If you wish the package to be placed in the workspace the it is best to use the Jenkins variable ${WORKSPACE}

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      See the list of available environment variables.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • crxDownload
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Download CRX Content Package files from a configured Adobe Granite repository into the workspace via the CRX Package Manager.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • packageIds : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify a list of package IDs to download to the workspace. Each package ID string must occupy its own line.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      A Package ID consists of the group, the name, and the version of a package, separated by colons (':'), as in: "group:name:version".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This field supports parameter tokens.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • baseUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify the base URL of the Adobe Granite server, including hostname and port. The CRX Package Manager service path will be appended to this value for all requests. For example, http://localhost:4502 or https://author.mycorp.com, etc.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If login credentials for the server are different than those configured in the Connection Options section, you may override them in the Base URL by inserting username[:password]@ between the scheme and the hostname.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For example, to override the Username without changing the associated password or private key, you may use the following form:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      http://deployer@localhost:4502

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      To override the credentials completely, provide a username and password (which may be provided by an encrypted parameter) by separating them with a colon, as shown below:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      http://deployer:Password123@localhost:4502

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This field supports parameter tokens.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select the login credentials with which content packages will be downloaded from the CRX server.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      [Signature] credentials may be used if the target server supports HTTP Signature Authentication using the keyId format, /$username/keys/$fingerprint.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select "-none-" to use the default credentials set in the global CRX Content Package Deployer - HTTP Client configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ignoreErrors : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Check this box to ignore errors during download such that the build continues after completion of this step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • localDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify a path relative to the workspace to which packages will be downloaded.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This field supports parameter tokens.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • rebuild : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Check this box to rebuild each package before downloading it. If rebuilding a package fails, the job will fail, unless Ignore Errors is also checked. If there are errors during rebuild, but it is ultimately reported as successful, then the job will be marked as unstable and the download step will continue.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • requestTimeout : long (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify the timeout in milliseconds to wait for a response for each individual request. Specify a value of 0 to use default behavior.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serviceTimeout : long (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify the timeout in milliseconds to wait for PackageManager service availability between sending POST requests. Specify a value of 0 to use default behavior.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • waitDelay : long (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify a delay in milliseconds before calls to check for Package Manager service availability. Increase this value if a /crx/packmgr node is sometimes created in the repository by this step, indicating that the Package Manager servlet was brought down for bundle installation AFTER a successful check for service availability, but BEFORE the next POST request was sent. What happens is that the SlingPostServlet takes over when the crx-packagemgr bundle is refreshed and creates nodes for any POST requests that it handles. Increasing this delay gives more time for the bundle refresh process to begin on the server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • googleStorageDownload
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • bucketUri : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This specifies the cloud object to download from Cloud Storage. You can view these by visiting the "Cloud Storage" section of the Cloud Console for your project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      A single asterisk can be specified in the object path (not the bucket name), past the last "/". The asterisk behaves consistently with gsutil. For example, gs://my-bucket-name/pre/a_*.txt would match the objects in cloud bucket my-bucket-name that are named pre/a_2.txt or pre/a_abc23-4.txt, but not pre/a_2/log.txt.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • localDirectory : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The local directory that will store the downloaded files. The path specified is considered relative to the build's workspace. Example value:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • path/to/dir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pathPrefix : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The specified prefix will be stripped from all downloaded filenames. Filenames that do not start with this prefix will not be modified. If this prefix does not have a trailing slash, it will be added automatically.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'DoxygenBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • doxyfilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • installationName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • continueOnBuildFailure : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • unstableIfWarnings : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'DrMemoryBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • executable : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • arguments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • logPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • treatFailed : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Enable this if dr-memory command line interface returns a non-zero return value even when the program creates a proper analysis
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'DropAllBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • changeLogFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • changeLogParameters : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • contexts : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Liquibase contexts to execute under.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • installationName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • labels : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Liquibase labels to execute
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • liquibasePropertiesPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      A liquibase.properties file can be used for default values. Any of the below settings will override what is in this file. This file should be relative to a directory listed in the "Resource directories" section.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • password : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • resourceDirectories : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Leave blank for workspace root. May be relative to workspace or an absolute path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • url : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      example: jdbc:mysql://localhost:3306/sampledb. The JDBC driver must be available in the "lib" directory of your Liquibase installation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • username : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'DrupalInstanceBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • db : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify the database connection string, e.g. mysql://user:password@localhost/db
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • root : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify a local directory for the Drupal root (relative to the workspace root). If left empty, the workspace root itself will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • profile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify an installation profile. Drupal 7 natively includes three installation profiles: 'minimal', 'standard' and 'testing'.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • refresh : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If checked, every build will wipe out and recreate a fresh Drupal instance.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Note that creating a fresh Drupal instance sends an email to the site administrator (by default admin@example.net) which may be annoying.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • updb : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If checked, every build will run update.php. This option only makes sense if 'Create a fresh installation for every build' is unchecked.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'DrupalReviewBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Review code using the Coder Review module.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If your code base does not include Coder, then Coder will be downloaded automatically.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • style : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • comment : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • sql : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • security : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • i18n : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • root : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify a local directory for the Drupal root (relative to the workspace root). If left empty, the workspace root itself will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • logs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify a local directory to dump code review results (relative to the workspace root). Use the Checkstyle plugin to interpret results in a post-build action.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • except : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify modules/themes that should not be reviewed, relative to the Drupal root directory.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For instance if you want to review only custom code then you might want to exclude contributed and core projects:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          sites/all/modules/contrib/**,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          sites/all/themes/contrib/**,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          modules/**,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          themes/**,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          profiles/**
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This field supports FileSet includes.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ignoresPass : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If checked, warnings flagged as ignored will pass.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Note that the ignore system was introduced in Coder 7.x-2.4. This option will be ignored if using an older version of Coder.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'DrupalTestsBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • uri : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      URI of the Drupal site. Simpletest requires this option to be set.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • root : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify a local directory for the Drupal root (relative to the workspace root). If left empty, the workspace root itself will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • logs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify a local directory to dump test results (relative to the workspace root). Use the JUnit plugin to interpret results in a post-build action.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • exceptGroups : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify Simpletest groups that should not be tested. For instance if you want to run tests only on custom code then you might want to exclude core groups:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Actions, Aggregator, AJAX, Batch API, Block, Blog, Book, Bootstrap, Cache, Color, Comment, Contact, Contextual, Dashboard, Database, DBLog, Entity API, Field API, Field types, Field UI, File, File API, File API (remote), Filter, Form API, Forum, Help, Image, Locale, Mail, Menu, Module, Node, OpenID, Pager, Path, Path API, PHP, Poll, Profile, RDF, Search, Session, Shortcut, SimpleTest, Statistics, Syslog, System, Taxonomy, Theme, Tracker, Translation, Trigger, Update, Update API, Upgrade path, User, XML-RPC
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Multiple groups can be separated by a comma.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • exceptClasses : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify Simpletest classes that should not be tested, for instance 'UserLoginTestCase'.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Multiple classes can be separated by a comma.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ECXCDMBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Enter the ECX user name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • password : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Enter the ECX password.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Enter the ECX URL and then press the Test Connection button to ensure this job can contact the ECX server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • job : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Enter a job id that can be found in the list above and in square brackets.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • production : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select this checkbox if using ECX in production with a valid certificate.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • maxWaitTime : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Enter the amount of time in seconds to wait for an ECX job to complete.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'EclipseBuckminsterBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • installationName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • commands : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • logLevel : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • params : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • targetPlatformName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • userTemp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • userOutput : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • userCommand : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • userWorkspace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • globalPropertiesFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • equinoxLauncherArgs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • eggplantRunner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • CACertPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • backoffFactor : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • clientId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • clientSecret (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • dryRun : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • logLevel (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Values: INFO, DEBUG, WARNING, ERROR
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pollInterval : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • requestRetries : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • requestTimeout : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serverURL : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • testConfigId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • testResultPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ElasticsearchQueryBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • query : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Elastic Search query to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • aboveOrBelow : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Whether the threshold value is too high or too low. If set to gte counts greater than or equal to threshold will fail the build. If set to lte counts less than or equal to threshold with fail the build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • threshold : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The count of query results in a given time to trigger build failure
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • since : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      How long ago to look back for results relative to the time the build executes must be greater than 0.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • units : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Time units for the since value
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'EndAnalysisBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • restoreBuildFile
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • shouldRestore : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        SeaLights Jenkins Plugin updates the customer's build file by adding relevant plugins automatically. Customers which would like to keep the build file as is, should check this option. By checking this option, SeaLights Jenkins Plugin will override the modified build file with a copy of the original one, thus overriding its changes to the file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • folders : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • parentPom : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'EnvInjectBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • propertiesFilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • propertiesContent : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'EnvPropagatorBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • envVariableString : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Provide build env variables in format PARAM1=VAL1:PARAM2=VAL2... Existing build env variables will be overwritten and the new ones will be added and made available to the next build steps.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'EnvironmentManagerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • systemId : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • environmentId : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • instanceId : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • copyToServer : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • newEnvironmentName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serverType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serverId : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serverHost : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serverName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • copyDataRepo : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • repoType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • repoHost : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • repoPort : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • repoUsername : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • repoPassword : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • abortOnFailure : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'EnvironmentTagBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • credentials : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • region : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'EstimateBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The name field is used to specify the PaaSLane application that the artifacts mapped later will be associated with. For example, if the name of this field is "My Application" and you match 3 artifacts, there will be an application "My Application" with 3 modules that get profiled.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The "Authentication Token" field contains the PaaSLane token associated with a specific user in a specific tenant. This token can be gotten by logging into PaaSLane, clicking the username dropdown and selecting to "Get Token". Once you have clicked this option you should be presented with the time sensitive token.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • archiveFilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This optional value specifies an offset from the workspace of where to start looking for artifacts to include in the application. This, paired with "Regular Expression for Selecting Modules" and "Exclude Regular Expressions" help to specify included artifacts.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • regWhichIncludedModules : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This value specifies the Ant style regular expression used to search for artifacts residing under "Path to Artifact(s)". For examples of Ant Style regular expressions, please see examples.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • reportConfigName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Name of the Report Config to use when generating the Report. If you leave this field blank, PaaSLane will use the Default Report Config.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      To see your existing Report Configs, go to the PaaSLane UI, click "Applications", and click "New Report" next to an existing application. Under the "Create Report" button, you will see a dropdown that contains a list of existing Report Configs. You can click "Advanced" to see details and further configure your report.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • uri : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The "PaaSLane URL" field specifies the root url, including the host, port and context that define the location of the PaaSLane profiling environment to use. For most SaaS customers, this will be https://agent.paaslane.com/paaslaneagentserver. However, customers utilizing distributed profiling, will want to get their URL from their administrator.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • saasuri : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The "PaaSLane SaaS URL" field specifies the root url, including the host, port and context that define the location of the PaaSLane profiling environment to use. For most customers, this will be https://app.paaslane.com/paaslane.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • language : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The "Language" selection specifies which language rules should be applied to the artifacts that are uploaded and profiled.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • regexExclude : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The "Exclude Regular Expressions" field contains a comma separated list of regular expression patterns that will be applied to every matched artifact. If any of the patterns match the path of the artifact being reviewed, then that artifact will not be sent to PaaSLane. Examples of these regular expressions can be found here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • testOnly : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The "Test, but don't send files" field, when checked, will only display the files that would have been sent, based on the parameters. Use this field to get the parameters correct.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • maxNumberOfViolations : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      "Fail when Alert count greater than..." checkbox is selected, then this field will dictate the maximum number of allowable alerts. Anything more than this number will cause a failure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failBlockTotalVio : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The "Fail when Total Alert count greater than..." selection specifies if builds should be failed based on the total number of Alerts found.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • If this is not selected, builds will never be failed based on the number of total alerts found.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • If this is selected, builds will be failed if they exceed the maximum number of total alerts provided.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • maxNumberOfBlockerViolations : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      "Fail when Blocker Alert count greater than..." checkbox is selected, then this field will dictate the maximum number of allowable blocker alerts. Anything more than this number will cause a failure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failBlockBlockerVio : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The "Fail when Blocker Alert count greater than..." selection specifies if builds should be failed based on the number of Blocker Alerts found.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • If this is not selected, builds will never be failed based on the number of blocker alerts found.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • If this is selected, builds will be failed if they exceed the maximum number of blocker alerts provided.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • maxNumberOfImportantViolations : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      "Fail when Important Alert count greater than..." checkbox is selected, then this field will dictate the maximum number of allowable important alerts. Anything more than this number will cause a failure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failBlockImportantVio : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The "Fail when Important Alert count greater than..." selection specifies if builds should be failed based on the number of Important Alerts found.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • If this is not selected, builds will never be failed based on the number of important alerts found.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • If this is selected, builds will be failed if they exceed the maximum number of important alerts provided.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • maxNumberOfOptimizationViolations : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      "Fail when Optimization Alert count greater than..." checkbox is selected, then this field will dictate the maximum number of allowable optimization alerts. Anything more than this number will cause a failure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failBlockOptimizationVio : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The "Fail when Optimization Alert count greater than..." selection specifies if builds should be failed based on the number of Optimization Alerts found.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • If this is not selected, builds will never be failed based on the number of optimization alerts found.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • If this is selected, builds will be failed if they exceed the maximum number of optimization alerts provided.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • maxNumberOfWarningViolations : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      "Fail when Warning Alert count greater than..." checkbox is selected, then this field will dictate the maximum number of allowable optimization alerts. Anything more than this number will cause a failure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failBlockWarningVio : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The "Fail when Warning Alert count greater than..." selection specifies if builds should be failed based on the number of Warning Alerts found.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • If this is not selected, builds will never be failed based on the number of warning alerts found.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • If this is selected, builds will be failed if they exceed the maximum number of warning alerts provided.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • examTest_ExecutionFile
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    For projects that use EXAM as the test system. This causes Jenkins to invoke EXAM with the given options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • examName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pythonName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • examReport : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • systemConfiguration : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • clearWorkspace : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • javaOpts : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • logging : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • loglevelLibCtrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • loglevelTestCtrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • loglevelTestLogic : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pathExecutionFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pathPCode : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pdfMeasureImages : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pdfReport : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pdfReportTemplate : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pdfSelectFilter : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • reportPrefix : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • testrunFilter (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • adminCases : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • activateTestcases : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • examTest_Model
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    For projects that use EXAM as the test system. This causes Jenkins to invoke EXAM with the given options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • examName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pythonName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • examReport : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • executionFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • systemConfiguration : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • clearWorkspace : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • examModel : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • javaOpts : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • logging : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • loglevelLibCtrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • loglevelTestCtrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • loglevelTestLogic : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • modelConfiguration : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pdfMeasureImages : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pdfReport : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pdfReportTemplate : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pdfSelectFilter : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • reportPrefix : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • testrunFilter (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • adminCases : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • activateTestcases : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ExeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • exeName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cmdLineArgs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failBuild : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • executeCerberusCampaign
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • campaignName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Enter the campaign name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • environment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • browser : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      either
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      - Robot
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      or
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      - Robot server ip + Robot server port + browser

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If you enter a robot, no need to enter Robot server ip + Robot server port + browser
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • screenshot : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • verbose : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pageSource : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • seleniumLog : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeOut : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • retries : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • priority : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • tag : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Tag for the execution of this campaign. Tag is used to group and display all testcases execution of the campaign.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Use $[current_timestamp] to put the current timestamp to the job execution.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ss_p : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      either
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      - Robot
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      or
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      - Robot server ip + Robot server port + browser

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If you enter a robot, no need to enter Robot server ip + Robot server port + browser
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ssIp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      either
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      - Robot
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      or
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      - Robot server ip + Robot server port + browser

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If you enter a robot, no need to enter Robot server ip + Robot server port + browser
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • robot : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      either
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      - Robot
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      or
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      - Robot server ip + Robot server port + browser

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If you enter a robot, no need to enter Robot server ip + Robot server port + browser
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • manualHost : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • manualContextRoot : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • country : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If empty, the countries defined on the campaign will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cerberusUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeOutForCampaignExecution : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • executor : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ExecuteCommandAction'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The command to apply to the issue, can be left empty to only send a comment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • search : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Search query to find issues to update. If both search query and and issue in text is set, the command will be applied to the union of the two.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • issueInText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Text to search for issues ids for which the command will be applied. If both search query and issue in text is set, the command will be applied to the union of the two. Entering ${YOUTRACK_CHANGES} will insert the commit messages for the build concatenated together.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • comment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The comment to set on the issues found.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • commentVisibility : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • jobDsl
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • additionalClasspath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Newline separated list of additional classpath entries for the Job DSL scripts. All entries must be relative to the workspace root, e.g. build/classes/main. Supports Ant-style patterns like lib/*.jar.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • additionalParameters (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Type: java.util.Map<java.lang.String, java.lang.Object>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failOnMissingPlugin : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If checked, the build will be marked as failed if a plugin must be installed or updated to support all features used in the DSL scripts. If not checked, the build will be marked as unstable instead.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failOnSeedCollision : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Fail build if generated item(s) have the same name as existing items already managed by another seed job. By default, this plugin will always regenerate all jobs and views, thus updating previously generated jobs and views even if managed by another seed job. Check this box if you wish to fail the job if a generated item name collision is detected.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ignoreExisting : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Ignore previously generated jobs and views. By default, this plugin will always regenerate all jobs and views, thus updating previously generated jobs and views. Check this box if you wish to leave previous jobs and views as is.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ignoreMissingFiles : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Ignore missing DSL scripts. If not checked, the build step will fail if a configured script is missing or if a wildcard does not match any files.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • lookupStrategy (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Determines how relative job names in DSL scripts are interpreted. You will only see a difference when the seed job is located in a folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Jenkins Root When this option is selected relative job names are always interpreted relative to the Jenkins root.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Seed Job If you choose this option relative job names in DSL scripts will be interpreted relative to the folder in which the seed job is located. Suppose you have a seed job which is located in a folder named seedJobFolder and a DSL script which creates a job named subfolder2/job. The job that is created by the seed job will be at the location /seedJobFolder/subfolder2/job.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Values: JENKINS_ROOT, SEED_JOB
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • removedConfigFilesAction (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specifies what to do when previously generated config files are not referenced anymore.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Note: when using multiple Job DSL build steps in a single job, set this to "Delete" only for the last Job DSL build step. Otherwise config files may be deleted and re-created. See JENKINS-44142 for details.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Values: IGNORE, DELETE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • removedJobAction (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specifies what to do when a previously generated job is not referenced anymore.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Note: when using multiple Job DSL build steps in a single job, set this to "Delete" or "Disable" only for the last Job DSL build step. Otherwise jobs will be deleted and re-created or disabled and re-enabled and you may lose the job history of generated jobs. See JENKINS-44142 for details.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Values: IGNORE, DISABLE, DELETE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • removedViewAction (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specifies what to do when a previously generated view is not referenced anymore.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Note: when using multiple Job DSL build steps in a single job, set this to "Delete" only for the last Job DSL build step. Otherwise views may be deleted and re-created. See JENKINS-44142 for details.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Values: IGNORE, DELETE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • sandbox : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If checked, runs the DSL scripts in a sandbox with limited abilities. You will also need to configure this job to run with the identity of a particular user. If unchecked, and you are not a Jenkins administrator, you will need to wait for an administrator to approve the scripts.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • scriptText : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      DSL Script, which is groovy code. Look at documentation for details on the syntax.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • targets : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Newline separated list of DSL scripts, located in the Workspace. Can use wildcards like 'jobs/**/*.groovy'. See the @includes of Ant fileset for the exact format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Scripts are executed in the same order as specified. The execution order of expanded wildcards is unspecified.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • unstableOnDeprecation : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If checked, marks the build as unstable when using deprecated features. If not checked, a warning will be printed to the build log only.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • useScriptText : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ExecuteJobBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • jobId : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • jobName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • jobType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • abortOnFailure : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • abortOnTimeout : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeoutMinutes : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • publish : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • projectId : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • buildId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • sessionTag : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • appendEnv : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • execMan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • requestType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • altEMConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional alternative Execution Manager configuration. If provided, these parameters override those specified in Jenkins global configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentials : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • bookmark (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select this to run a predefined bookmark configured on the Execution Manager via the Management Studio.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • folder : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • execParams (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional execution request parameters. Both a key and value must be specified. The value can refer to Jenkins environment variables using this syntax - ${JENKINS_ENV_VAR}. For example - ${BUILD_ID}.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • list (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • key : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • postExecute (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional post execution action. To perform any post action, provide action name along with the need parameters.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • action : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • params : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • processList (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select this to execute a list of Certify processes without creating a request or bookmark first.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • database : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Alias name of the Certify connection saved in Management Studio > Configuration > Certify Configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • project : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Certify project where processes reside.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • processes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        List of the fully qualified path to each process.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • processPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • folder : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Folder where Certify Results will be saved. If not specified, results go to the root results folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • requestName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Name given to the request execution.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • request (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select this to run a predefined request configured on the Execution Manager.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • waitConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional execution request wait configuration. Both the polling interval and maximum run time must be specified in seconds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • pollInterval : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • maxRunTime : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ExecuteStepBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • server : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • authenticationType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • userName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • password
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • database : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • filesToExecute : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • compareOptions : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fileEncoding : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • filterFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ignoreError : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • transactionIsoLvl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • zipPassword (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • executeTestsFromAlmOctane
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This build step is intended to support execution of automated tests from Micro Focus ALM Octane.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    There are several modes of execution :
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Mode Explanation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Execute suite runs in ALM Octane Execute suites according to specified suite IDs. New suite runs will be created and executed in ALM Octane. Jenkins job is finished after triggering the suite runs. The job does not wait until the suite runs are finished. This method is useful if you want to schedule suite execution in ALM Octane.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    By default, newly created suite runs will have name of suite and will be assigned to default release. In order to override this default behaviour, add following parameters (one or more) to job with your desired values:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • octane_release_id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • octane_new_suite_run_name
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Get tests from suites and trigger execution jobs Get tests from suites and trigger execution jobs : Get tests from specified suite IDs. (This method assumes that tests are assigned to test runner jobs from the current Jenkins.) Tests are send to execution by their assigned test runner jobs. The main job is finished after the test runner jobs are finished. This method is useful if you intend to add your job to the ALM Octane Pipeline module.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • configurationId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • workspaceId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • executionMode : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ids : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • executeCloudifyWorkflow
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This step executes a workflow on Cloudify Manager.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • credentialsId : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The ID of the credentials to use when accessing Cloudify. Parameters' expansion is supported when using freestyle jobs.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • debugOutput : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If checked, then printed Cloudify events and logs will include debug-level records.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • deploymentId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      ID of the Cloudify environment to delete.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • executionParameters : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Parameters to pass to the execution, in YAML/JSON format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • printLogs : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If checked, then the execution's events and logs are printed to the build log. Note that this implies "wait for completion".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • tenant : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Cloudify tenant to operate on. If left empty, then the default tenant (defined in the plugin's configuration page) will be used.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • waitForCompletion : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If checked, then the build waits for the execution to finish. If the execution ends in any way other than success, the build step will fail.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • workflowId : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The ID of the workflow to execute.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ExecutorBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • frameworkType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The supported framework by this step are XCUITest (by Apple) and Espresso (by Google).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • runningType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Fast Feedback - will distribute the tests between the maximum pull of devices available. Every test will be execute once.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Coverage - will execute all the tests on all of the selected devices. Every test will be execute on every selected device.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • app : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The application to test, in case of XCUITest should be an IPA file and in case of Espresso should be an APK file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • testApplication : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The application contain the tests to execute, in case of XCUITest should be an IPA file and in case of Espresso should be an APK file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • deviceQueries : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      A query string that will enable to select the devices that will be used. For example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • @serialnumber=’aabbccddee’
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Will select a specific device with a given serial number of udid.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • @os=’android’ and @versionnumber > 5.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Select android with a version that is bigger than 5.0

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Other field that can be used:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • manufacture: device manufacture for example: samsung
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • model: Device model, for example: SM-G935F
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • modelName: Device marketing name: for example: Galaxy S7 Edge
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • name
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • os: Operating system.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • remote: If device is connected through SeeTestCloud or not (values are true/false).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • serialnumber: S/N of the device.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • version: The device's operating system version (for example 4.1.2).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • versionnumber: The device's operating system version number (for example 4.1).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • category: The device category. Currently supported in android devices. possible values- 'WATCH', 'PHONE' or 'TABLET'.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • runTags : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      All tests that are part of this step will be ‘tagged’ with the provided key value. The tags will enable to filter your specific execution.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • executorOptions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • maxDevices : int

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Accepted value: [1..1000]. Default is 10

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Set the maximum number of devices to allocate for this step execution.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Only applicable for Fast feedback mode.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • minDevices : int

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Accepted value: [1..1000]. Default is 10

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Set the minimum number of devices to allocate for this step execution.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Only applicable for Fast feedback mode.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ignoreTestsFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • iOS - xcscheme file
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Android - text file with include full class name:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • <class name 1>,<method name 1>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • <class name 2>,<method name 2>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • overallExecTimeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Set the step overall execution timeout. If the step execution time exceeded the given time, it will end with failure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • creationTimeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • exportIpa
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • appURL : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • archiveDir : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify the location of the path (usually BUILD_DIR specified by xcodebuild) to read the Archive for exporting the IPA file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Supports all macros and also environment and build variables from the Token Macro Plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For example you can use the value :

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      ${WORKSPACE}/build
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • assetPackManifestURL : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • compileBitcode : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • copyProvisioningProfile : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • developmentTeamID : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • developmentTeamName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • displayImageURL : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fullSizeImageURL : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ipaExportMethod : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ipaName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ipaOutputDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • keychainId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • keychainName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • keychainPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • keychainPwd (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • manualSigning : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • packResourcesAsset : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • provisioningProfiles (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • provisioningProfileAppId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • provisioningProfileUUID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • resourcesAssetURL : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • signingMethod : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • stripSwiftSymbols : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • symRoot : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • thinning : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • unlockKeychain : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • uploadBitcode : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • uploadSymbols : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • xcodeName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • xcodeProjectPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • xcodeSchema : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • xcodeWorkspaceFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • exportPackages
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Exports ECU-TEST packages and their attributes to a test management system like RQM or ALM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • exportConfigs (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ExportPackageAttributeConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ExportPackageConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • exportPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • createNewPath : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ExportProjectAttributeConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ExportProjectConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • exportPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • createNewPath : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ImportPackageAttributeConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ImportPackageConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ImportPackageDirConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ImportProjectArchiveConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • importConfigPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • replaceFiles : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ImportProjectAttributeConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ImportProjectConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • importMissingPackages : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tmProjectId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ImportProjectDirConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ExportParametersBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The path of exported file. This can be relative path against the workspace. Proper file extension is added to the end of path. You can prevent it by adding "." to the end of path. If parameters are actually exported to file, The path is provided as a parameter EXPORT_PARAMS_FILE.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fileFormat : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The format of exported file. You can select one of the followings. If parameters are actually exported to file, The format name is provided as a parameter EXPORT_PARAMS_FORMAT.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • keyPattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      You can specify the list of keys delimited by ",". A key is treated as prefix. If it matches the beginning of parameter's key, its parameter would be exported. If empty, all parameters would be exported.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • useRegexp : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Check if you want to use regular expression as key pattern.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • exportProjects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Exports ECU-TEST projects and their attributes to a test management system like RQM or ALM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • exportConfigs (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ExportPackageAttributeConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ExportPackageConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • exportPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • createNewPath : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ExportProjectAttributeConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ExportProjectConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • exportPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • createNewPath : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ImportPackageAttributeConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ImportPackageConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ImportPackageDirConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ImportProjectArchiveConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • importConfigPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • replaceFiles : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ImportProjectAttributeConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ImportProjectConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • importMissingPackages : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tmProjectId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ImportProjectDirConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ExporterBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ExtensiveTestingBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • login : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • password : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • serverUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • debug : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • downloadFeatureFiles
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Downloads feature files from Zephyr Scale.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • serverAddress : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        One of the preconfigured Jira instances. If you do not have any, please go to General Configuration and set up a new Jira instance.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectKey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Jira project key to filter test cases.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • targetPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The path where the downloaded feature files will be placed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • featureManagementConfig
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The User token is used to create the secret text credential by interacting with the CloudBees REST API to download the configuration.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        To retrieve your API token, from the CloudBees Feature Management Home page, from the left pane select App settings. In the Integrations tab under API, select Show to display the User token, then select Copy.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • applicationIdAndName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The CloudBees Feature Management application.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The Flag and Target group configurations are downloaded and displayed for this application when the environment is selected.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • environmentIdAndName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'FeedStatus'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • prefix : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Enter the project ID here. Example: P10. The following status will be added in the project’s Feed section.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • status : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Brief the status here. Note: All the script related information that you add in the status will be automatically removed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'FigletBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • message : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Help file for fields are discovered through a file name convention. This file is help for the "name" field. You can have arbitrary HTML here. You can write this file as a Jelly script if you need a dynamic content (but if you do so, change the extension to .jelly).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fileOperations
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • fileOperations
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • fileCopyOperation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Files included to copy, this supports ant-style file pattern ex: target/*/final*.xml
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Files excluded from copying, this supports ant-style file pattern ex: target/*/final*.xml
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • targetLocation : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Destination folder location to copy the files. Base directory is workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • flattenFiles : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If selected, files are copied directly to the target location without preserving source file sub-directory structure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • renameFiles : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            By default, the file name of the source file is preserved. When flattening files, this can cause problems if files of the same name exist in multiple source sub-directories. Selecting this option allows the output file name to be manipulated to avoid file name clashes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sourceCaptureExpression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Java-style regular expression that is run against the full path of each matching source file. This should be used to capture parts of the path that will be used in the target name expression to make each file name unique across all subdirectories.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • targetNameExpression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            An expression that provides the desired target file name. This can reference variables captured in the source capture expression by using $1, $2 etc.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • fileCreateOperation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • fileName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Path and Name of the file to be created in workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • fileContent : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            File content to be created, use environment variables where needed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • fileDeleteOperation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Files included to delete, this supports ant-style file pattern ex: target/*/final*.xml
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Files excluded from deleting, this supports ant-style file pattern ex: target/*/final*.xml
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • fileDownloadOperation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Url of the file to download.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • userName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • password : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • targetLocation : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Destination location to download the file. Base directory is workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • targetFileName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • proxyHost : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • proxyPort : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • fileJoinOperation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sourceFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Source file path to copy the content.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • targetFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Target file path to append the content from source file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • filePropertiesToJsonOperation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sourceFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Source file path of properties.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • targetFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Target file path to create or update with json data.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • fileRenameOperation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • source : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            File to be renamed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • destination : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Destination file location to rename. Base directory is workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • fileTransformOperation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Files included to copy, this supports ant-style file pattern ex: target/*/final*.xml
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Files excluded from copying, this supports ant-style file pattern ex: target/*/final*.xml
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • fileUnTarOperation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Source tar file location.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • targetLocation : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Destination folder location to untar the files. Base directory is workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • isGZIP : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • fileUnZipOperation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Source zip file location.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • targetLocation : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Destination folder location to unzip the files. Base directory is workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • fileZipOperation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • folderPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Path of the file or folder to create a zip file for, relative to the workspace directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • outputFolderPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Path to a target directory for the zip file, relative to the workspace directory. Defaults to workspace directory if not defined.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • folderCopyOperation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sourceFolderPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Folder to be copied.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • destinationFolderPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Destination folder location to copy the files. Base directory is workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • folderCreateOperation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • folderPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Path and Name of the folder to be created in workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • folderDeleteOperation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • folderPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Path and Name of the folder to be deleted in workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • folderRenameOperation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • source : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Folder to be renamed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • destination : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Destination folder name to rename. Base directory is workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'FireLineBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • fireLineTarget
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • csp : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If you select "Yes", this plugin will set the following content of CSP to allow access to HTML with JS or CSS.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          sandbox allow-scripts; default-src *; style-src * http://* 'unsafe-inline' 'unsafe-eval'; script-src 'self' http://* 'unsafe-inline' 'unsafe-eval'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Warning:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          There is a security risk if you select "Yes".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • blockBuild : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If there are some questions of block level detected from your project,FireLine plugin will make build fail when you select "Yes".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • configuration : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          配置文件,可以通过该配置控制FireLine扫描规则、过滤文件等功能。 访问火线(FireLine)官网查看更多详情。 配置内容的写法如下:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               <?xml version="1.0" encoding="UTF-8" standalone="no"?>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               <fireline>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   <args>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <!-- 序号对应的规则种类,用加号+相连
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          1:代码规范类
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          2:内存类
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          3:日志类
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          4:安全类
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          5:空指针
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          6:多线程
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       -->
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <scanTypes>1+2+4+5+6</scanTypes>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <!--以上写法过滤了日志类的所有规则-->
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <!--以下为过滤掉指定的单条规则,请加QQ群298228528获取规则名称-->
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <filterRules>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <!--<filterRule ruleName="LogOnOffRule" />
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <filterRule ruleName="LogBlockRule" />
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <filterRule ruleName="LogAssignmentRule" />-->
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       </filterRules>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <!--过滤掉你不想检查的文件(注意:重复代码检查不支持过滤)-->
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <filterFiles>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <!--过滤单个文件-->
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <!--<filterFile Name="R.java"/>-->
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <!--过滤整个文件夹-->
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <!--<filterFile Name="/facebook/"/>-->
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       </filterFiles>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   </args>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               </fireline>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          以上配置文件去掉了日志类的规则,所以火线扫描过程中就不会执行日志类规则的检查。

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • reportPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          FireLine火线扫描后产生的结果报告路径。 也可以使用jenkins环境变量,例如${WORKSPACE}。 默认扫描报告文件名为testReport.html。
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • reportFileName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          FireLine火线扫描后产生的结果报告文件名。 默认扫描报告文件名为testReport.html。 也可以使用jenkins环境变量,例如testReport_${buildID}.html
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • buildWithParameter : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          可通过配置使用build with parameter插件,在项目构建时灵活使用火线扫描。

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          例如:在项目配置中设置参数化构建参数。配置boolean类型参数fireline。

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          则在此输入框中填写${fireline}即可

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • jdk : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          JDK to be used for this FireLine analysis.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Tips:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               JDK1.7 or 1.8 is compatible with FireLine.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • jvm : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          合理设置JVM参数可以有效提高扫描效率,建议JVM最低配置如下:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          "-Xms1g -Xmx1g -XX:MaxPermSize=512m"

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'FitnesseBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • options
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Type: java.util.Map<java.lang.String, java.lang.String>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'FixResultBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Set the build result (helps testing project configurations, notifications, promotions, upstream/downstream dependencies etc.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • defaultResultName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Set the build result for when the build number is not listed in the advanced options
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • success : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        A list of comma or space separated build numbers for which the result should be success
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • unstable : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        A list of comma or space separated build numbers for which the result should be unstable
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • failure : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        A list of comma or space separated build numbers for which the result should be failure
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • aborted : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        A list of comma or space separated build numbers for which the result should be aborted
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • flywayrunner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • installationName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • flywayCommand : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • locations : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • commandLineArgs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'FogbugzLinkBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • frugalTesting
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • userId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • testId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • runTag : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • getJtl : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • serverUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'FtpRenameBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ftpServer : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ftpPort : int

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          if you don't specify the port, the default port is 21.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ftpUser : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ftpPassword
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ftpPath : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specify the path to your artifact.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • artifactName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • newArtifactName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • remoteDirectory : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Optional destination folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          This folder will be below the one in the global configuration, if present.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The folder won't be created if does not exist.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'FuzzBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • configurationFilePath : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The file path where the test configuration file (*.set or *.testplan) for this job can be found, relative to the project's workspace.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          A test configuration file defines what kind of testing is to be done, and can be created using Defensics. Configure a test suite in Defensics and save the settings file in File -> Save Settings.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • configurationOverrides : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Additional test configuration settings that override the settings saved in the test configuration file. This can be useful if, for example, the test target address needs to be set dynamically.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The available settings are the same as the Defensics command line settings. Each setting should follow the format '--setting-name value'. Multiple settings are separated with spaces.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Example for HTTP Server Test Suite:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          --uri https://example.com --http-status-filter "1xx 2xx 3xx" 

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • defensicsInstance : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Select Defensics instance to use for running tests. Instances can be added in Jenkins' global configuration under the Defensics section.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • saveResultPackage : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Check this if you want Jenkins to download the Defensics result package and store it for the build. The result package includes all logs for the test run. The package can be downloaded from the build status page. Use with caution as the package filesize can be large.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'FxCopBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • toolName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • files : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Assembly file(s) to analyze.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          You can specify multiple analyze assemblies by separating them with new-line or space.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Command Line Argument: /file:[ file/directory ]

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • outputXML : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          FxCop project or XML report output file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Command Line Argument: /out:[ output file path ]

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ruleSet : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Rule set to be used for the analysis.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Command Line Argument: /ruleset:=[ Rule set file path ]

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ignoreGeneratedCode : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Suppress analysis results against generated code.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Command Line Argument: /ignoregeneratedcode

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • forceOutput : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Write output XML and project files even in the case where no violations occurred.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Command Line Argument: /forceoutput

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • cmdLineArgs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • failBuild : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'GCloudSDKBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'GCloudSDKWithAuthBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'GatekeeperCommit'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • commitUsername : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          User name in format: "Foo Bar ". Required.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'GatekeeperMerge'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • commitUsername : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          User name in format: "Foo Bar ". Required.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • releaseFilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Relative (inside of the repository) path to the release file would be added/replaced and committed if target release branch does not exist. Optional.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • releaseFileContentTemplate : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Mustache template to be rendered and put to release file. Optional. Available context:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • release - the number of release
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          UTF-8 encoding is expected.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'GatekeeperPush'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • gcrImageVulnerabilityScanner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • imageName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • genexusb
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • gxInstallationId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            GeneXus installation to use for building.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • kbPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Path to the Knowledge Base to build (eg: "${WORKSPACE}\KBname" or "C:\MyCustomPath\MyKb").
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • kbVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Name of the Version to build. If you leave it blank the 'Trunk' version will be selected by default.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • kbEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Name of the Environment to build. If you leave it blank the first Environment will be selected by default.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • kbDbCredentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Credentials used to connect to SQL Server. Select "none" for Windows Authentication.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • forceRebuild : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            By default GeneXus specify and generate only the objects that were affected by changes since the last build. An object may be affected because it was directly modified or because any other object on which it depends was changed. Set this option if for any reason you want to force the build for all objects.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'GenerateChangeScriptBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Generate an alter SQL script based on a previous schema compare build step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • in : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify path to input folder for generating SQL change script. This folder should contain result of previously executed "Run Compare" build step.




                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Folder location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • out : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Path to the file that should be used to store SQL change script.



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            File location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Absolute path to location on your Jenkins master node
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Relative path to your project's workspace. Either starting with ${WORKSPACE} prefix. i.e. ${WORKSPACE}file or without prefix i.e. dir.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Relative path to your job's run root directory. It must start with ${JOB_ROOT_DIR} prefix. i.e. ${JOB_ROOT_DIR}file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'GenerateCreateScriptBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Generate a create SQL script from your repository, saved snapshot or database.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • outputFile : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Path to the file that should be used to store create SQL script.



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            File location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Absolute path to location on your Jenkins master node
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Relative path to your project's workspace. Either starting with ${WORKSPACE} prefix. i.e. ${WORKSPACE}file or without prefix i.e. dir.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Relative path to your job's run root directory. It must start with ${JOB_ROOT_DIR} prefix. i.e. ${JOB_ROOT_DIR}file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • inputFileOrFolder : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify input folder/file for generating create SQL script. It should depend on input type you have selected.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Database - input is exported connection file
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • File System Synchronization - input is folder mapped through Toad Edge file system synchronization
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Snapshot - input is snapshot file



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Folder/file location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'GenerateJenkinsReportBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Generate a HTML report based on a previous schema compare build step. This report is accessible via build detail within build history in Jenkins.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Warning: You can include only one Generate Jenkins HTML comparison report step per project.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • inputFolder : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify path to input folder containing output from "Run Compare" build step.



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Folder location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'GenerateStandaloneReportBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Generate a HTML report based on a previous schema compare build step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • inputFolder : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify path to input folder containing output from "Run Compare" build step.



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Folder location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Relative or absolute path to your project's workspace. Relative path should start with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • outputFolder : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify path to folder where standalone report will be exported.



                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Folder location must be specified as:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Absolute path to location on your Jenkins master node
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Relative path to your project's workspace. Either starting with ${WORKSPACE} prefix. i.e. ${WORKSPACE}dir or without prefix i.e. dir.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Relative path to your job's run root directory. It must start with ${JOB_ROOT_DIR} prefix. i.e. ${JOB_ROOT_DIR}dir.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ghostInspector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • apiKey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Enter your Ghost Inspector API key. This is a unique, private key provided with your account which allows you to access the API. You can find it in your Account Settings in the Ghost Inspector application.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • suiteId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Enter the ID of the Ghost Inpsector suite that you would like to execute.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • startUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (Optional) Enter a custom URL to run the test suite on. If you're running your tests on the local build of your application, you may wish to create an local tunnel and use that URL here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • params : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (Optional) Additional parameters to pass to the API in the form of "viewport=1024x768&customVar=foo". You may wish to override the screen size or include custom variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • gitAutomerger
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • checkoutFromRemote : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • detailConflictReport : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • limitAuthorsInDetailReport : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • limitCommitsInDetailReport : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • logLevel (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Values: TRACE, DEBUG, INFO, WARN, ERROR
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • mergeRules (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • path : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • resolution
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Values: KEEP_OLDER, KEEP_NEWER, MERGE_OLDER_TOP, MERGE_NEWER_TOP
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • releaseBranchPattern : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • remoteName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • gitbisect
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • jobToRun : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • goodStartCommit : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • badEndCommit : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • searchIdentifier : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • revisionParameterName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • retryCount : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • continuesBuild : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • minSuccessfulIterations : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • overrideGitCommand : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • gitCommand : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • gitHubPRStatus
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • statusMessage
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • content : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Message content that will be posted. Support core variable expansion i.e. ${WORKSPACE}.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If token-macro plugin enabled, then support token expansion.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If email-ext plugin enabled, then support expanding groovy templates with ${SCRIPT, path="template.groovy"}.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'GitHubSetCommitStatusBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • contextSource (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'DefaultCommitContextSource'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Uses display name property defined in "GitHub project property" with fallback to job name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ManuallyEnteredCommitContextSource'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                You can define context name manually.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • context : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Allows env vars and token macros.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • statusMessage (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • content : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Message content that will be expanded using core variable expansion i.e. ${WORKSPACE}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                and Token Macro Plugin tokens.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GitStatusWrapperBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The gitStatusWrapper builder wraps set of job builders and handles PENDING/SUCCESS/FAILURE git statuses automatically

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Check documentation here

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildSteps : Array / List of Build Step (hudson.tasks.BuildStep)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • account : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The GitHub account that owns the repos that contains the commit to notify

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Default: If SCM used, plugin will attempt to get details from SCM execution

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Check documentation here

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentialsId : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The GitHub credentials, username/password or username/accessToken

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • description : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The notification description, it will be displayed by GitHub

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Default: ""

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Check documentation here

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • failureDescription : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The notification description for a failure, it will be displayed by GitHub

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Default: value set to description

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This field can also be given a regular expression to evaluate on the entire build log. To have the expression evaluated, wrap it with "/". Example: "/^buildVersion=(.*)$/"

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Check documentation here

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • gitApiUrl : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If you are a user of GitHub Enterprise use this field to set your custom API endpoint

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Default: https://api.github.com

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • gitHubContext : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The git status context key. Keys are used by GitHub to differentiate between notifications

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Default: gitStatusWrapper

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Check documentation here

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • repo : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The GitHub repository that contains the commit to validate, must be owned by the user specified in the account field

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Default: If SCM used, plugin will attempt to get details from SCM execution

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Check documentation here

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • sha : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The SHA that identifies the commit to notify

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Default: If SCM used, plugin will attempt to get details from SCM execution

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Check documentation here

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • successDescription : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The notification description for a success, it will be displayed by GitHub

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Default: value set to description

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This field can also be given a regular expression to evaluate on the entire build log. To have the expression evaluated, wrap it with "/". Example: "/^buildVersion=(.*)$/"

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Check documentation here

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • targetUrl : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Use this field to specify a custom target URL for the notification

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Default: Jenkins build URL

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Check documentation here

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GitToIspwPublish'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • app : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • branchMapping : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • connectionId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • ispwConfigPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • runtimeConfig : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • stream : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GnatmakeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • gnatName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • switches : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • fileNames : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • modeSwitches : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • gprbuild
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This build step can be used to build GNAT project files by invoking GPRbuild.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • installationName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the GNAT installation to use as configured in Jenkins.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • names : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Main source files represent the sources to be used as the main programs. If they are not specified on the command line, GPRbuild uses the source files specified with the Main attribute in the project file. If none exists, then no executable will be built. It is also possible to specify absolute file names, or file names relative to the current directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • proj : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              GPRbuild requires a project file, which may be specified on the command line either directly or through the -P switch. If not specified, GPRbuild uses the project file default.gpr if there is one in the current working directory. Otherwise, if there is only one project file in the current working directory, GPRbuild uses this project file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • switches : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              GPRbuild takes into account switches that may be specified on the command line or in attributes Switches(<main or language>) or Default_Switches (<language>) in package Builder of the main project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • gradle
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If your gradle build script is not named build.gradle, specify the gradle build name script.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • gradleName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • makeExecutable : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • passAllAsProjectProperties : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • passAllAsSystemProperties : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projectProperties : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • rootBuildScriptDir : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If your workspace has the top-level build.gradle in somewhere other than the module root directory, specify the path (relative to the module root) here, as parent where ${WORKSPACE}/parent is the absolute. If left empty, defaults to build.gradle in ${WORKSPACE} directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • switches : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify a list of Gradle switches to be invoked, or leave it empty.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • systemProperties : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • tasks : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify a list of Gradle tasks to be invoked.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • useWorkspaceAsHome : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Gradle will write to $HOME/.gradle by default for GRADLE_USER_HOME. For a multi-executor agent in Jenkins, setting the environment variable localized files to the workspace avoid collisions accessing gradle cache.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • useWrapper : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • wrapperLocation : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              By default, the Gradle plugin tries to locate the wrapper executable (gradlew on Unix and gradlew.exe on Windows) next to the build script. If it is not there it will look in the workspace root. If your workspace has the wrapper somewhere else, specify the path to the directory (relative to workspace) containing the wrapper executable here, such as parent instead of just ${workspace}/parent.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • gradleForesight
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projectId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Thundra Foresight Test Project Id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentialId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • thundraAgentVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • thundraGradlePluginVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Groovy'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Executes a groovy script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • scriptSource
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'FileScriptSource'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scriptFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'StringScriptSource'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • groovyName : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Groovy installation which will execute the script. Specify the name of the Groovy installation as specified in the Global Jenkins configuration.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • parameters : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Parameters for the Groovy executable.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • scriptParameters : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              These parameters will be passed to the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • properties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Instead of passing properties using the -D parameter you can define them here.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • javaOpts : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Direct access to JAVA_OPTS. Properties allows only -D properties, while sometimes also other properties like -XX need to be setup. It can be done here. This line is appended at the end of JAVA_OPTS string.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • classPath : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify script classpath here. Each line is one class path item.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GroovyRemoteBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • remoteName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • script : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • examRun_Groovy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For projects that use EXAM as the test system. This causes Jenkins to invoke EXAM with the given options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • examName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • script : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • startElement : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • examModel : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • modelConfiguration : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • javaOpts : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • timeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • useStartElement : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • grypeScan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Allow usage of grype, a vulnerability scanner for container images and filesystems.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • scanDest : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Scan targets can be explicitly provided with a following scheme:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • docker:yourrepo/yourimage:tag use images from the Docker daemon
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • docker-archive:path/to/yourimage.tar use a tarball from disk for archives created from "docker save"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • oci-archive:path/to/yourimage.tar use a tarball from disk for OCI archives (from Skopeo or otherwise)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • oci-dir:path/to/yourimage read directly from a path on disk for OCI layout directories (from Skopeo or otherwise)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • dir:path/to/yourproject read directly from a path on disk (any directory)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • registry:yourrepo/yourimage:tag pull image directly from a registry (no container runtime required)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • repName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • autoInstall : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If active, download and install grype by ececution of install.sh automatically in job workspace, otherwise 'grype' executable needs to be available in the PATH.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GsshCommandBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • disable : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • serverInfo : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • shell : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GsshFtpDownloadBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • disable : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • serverInfo : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • remoteFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • localFolder : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • fileName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GsshFtpUploadBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • disable : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • serverInfo : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • localFilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • remoteLocation : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • fileName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GsshShellBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • disable : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • serverInfo : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • shell : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'HOTPlayer'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The Heat Orchestration Template (HOT) player allows to play HOT file to OpenStack.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The HOT player load the HOT file choose in the selectbox and generate dynamically the inputs.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If the Associate Env File is configured than the selectbox permits to choose one file env file. By default when you choose a HOT file, the selectbox Associate Env File tries to select the same env file name if it exits or the default env file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The inputs are divided in 3 categories :
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Properties
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Stack name : corresponding to the the name used in OpenStack
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Delete stack if already exists ? : if you want reuse the same name for a stack, the plugin destroys the stack if already exits.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Debug mode ? : if it's checked than the console print all the differents values parameters
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Tags
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Add tags: This category is for adding tags to the stacks. Input should be a string, multiple tags can be added separated by ","
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Parameters
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • This category is generated dynamically from the differents parameters present in the HOT.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Outputs
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • This category is generated dynamically from the differents outputs present in the HOT.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            You can use variable environment in each input. The variable must be start with "$" without "-".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • project : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • bundle
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Type: class com.arkea.jenkins.openstack.heat.orchestration.template.Bundle
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • habitat
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • task : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • directory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • artifact : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • channel : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • origin : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • bldrUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • authToken : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • lastBuildFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • format : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • searchString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • command : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • binary : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • path : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • docker : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • healthAnalyzer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • products
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Choose the products that you would like to test that correspond to the relevant build step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'HealthAnalyzerLrStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • checkLrInstallation : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • checkOsVersion : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • checkFiles
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • filesList
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • field : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • nodePoolHold
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • duration : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Allows the user to specify how long to hold the nodepool node. Default is 1 day. The value should be a positive integer between 1 and 99 inclusive with a one letter unit signifying how long to hold the node (m=minutes, h=hours, d=days, w=weeks, M=months). However, maximum hold duration is 1 month. Examples include: 40m, 1h, 6h, 3d, 3w, 1M.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • reason : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'HorreumExpect'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentials : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Credentials used for authorization in Keycloak. The user account must have the uploader role; otherwise the build steps will fail.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • test : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name or ID of the test this run belongs to.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • timeout : long (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Timeout (in seconds) within which the run should be updloaded. If a matching run is not uploaded Horreum will notify users subscribed to this test as this is probably a result of failure in the build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • expectedBy : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the entity that runs this test.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • backlink : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              URL leading from Horreum (or the notifications) to this build. Use $BUILD_URL.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • quiet : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'HorreumUpload'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentials : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Credentials used for authorization in Keycloak. The user account must have the uploader role; otherwise the build steps will fail.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • test : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name or ID of the test this run belongs to.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • owner : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Team owning the run. Usually this is a lowercase identifier ending with -team, e.g. dev-team.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • access : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Access mode for the run:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • PUBLIC: everyone can see the run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • PROTECTED: only authenticated (logged-in) users can see the run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • PRIVATE: only owner team can see the run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • start : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Run start timestamp formatted as ISO-8601 timestamp (e.g. 2021-12-03T10:15:30.00Z), millisecond epoch time or JSON Path into the uploaded JSON file in one of those formats.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • stop : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Run termination timestamp formatted as ISO-8601 timestamp (e.g. 2021-12-03T10:15:30.00Z), millisecond epoch time or JSON Path into the uploaded JSON file in one of those formats.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • schema : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              URI of the schema. If this is not set the schema will be fetched from the uploaded JSON file, under $schema property. If Horreum has the JSON schema for this URI recorded it will validate the uploaded JSON against it.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • jsonFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to the JSON file that will be uploaded as run data.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • addBuildInfo : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Automatically add information to the JSON object about the Jenkins job and build that executes the upload. Default is false.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • quiet : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'HttpRequest'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • acceptType (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Values: NOT_SET, TEXT_HTML, TEXT_PLAIN, APPLICATION_FORM, APPLICATION_FORM_DATA, APPLICATION_JSON, APPLICATION_JSON_UTF8, APPLICATION_TAR, APPLICATION_ZIP, APPLICATION_OCTETSTREAM
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • authentication : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • consoleLogResponseBody : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • contentType (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Values: NOT_SET, TEXT_HTML, TEXT_PLAIN, APPLICATION_FORM, APPLICATION_FORM_DATA, APPLICATION_JSON, APPLICATION_JSON_UTF8, APPLICATION_TAR, APPLICATION_ZIP, APPLICATION_OCTETSTREAM
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • customHeaders (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • maskValue : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • formData (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • uploadFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fileName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • contentType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • body : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • httpMode (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Values: GET, HEAD, POST, PUT, DELETE, OPTIONS, PATCH
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • httpProxy : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • ignoreSslErrors : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • multipartName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • outputFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • passBuildParameters : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • proxyAuthentication : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • quiet : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • requestBody : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • timeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • uploadFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • useSystemProperties : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • validResponseCodes : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • validResponseContent : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • wrapAsMultipart : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • hugo
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • baseUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildFuture : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • destination : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • environment : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • hugoHome : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • verbose : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'HyperBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • image : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • commands : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ipythonBuilder
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • code : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Copy and paste your code to execute in selected server

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Eg: print(" Hello Jenkins, from Machine Learning Plugin ...... ! ")

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path of file that contains python code to be executed in the server

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Eg: /home/alice/iris/ml.py

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • parserType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • task : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Folder name that will be used for saving html/images/graphs generated by the script file or code

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Eg: Training

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • kernelName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Globally configured Jupyter kernels. If any kernels are not shown
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Manage Jenkins --> Configure System
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Under Kernel Configuration
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Add a name for kernel (Required)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Language (Optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Add timeout for launching
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Add max size of results that can be obtained form the kernel
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ITest'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • workspace : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Required.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              (1) Provide the full path to the iTest workspace containing projects, or

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              (2) Leave blank to indicate that the current job's workspace is also an iTest workspace (must contain an .iTestWorkspace file as created by iTest)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projects : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Required. Specify the name of the iTest project to export in an ITAR file (required to use iTestRT). Separate names of multiple projects with comma.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Note: The project must exist within the specified iTest workspace.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • testcases : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Required. Specify path to test case or test suite to run: must include extension (path/name.fftc or path/name.ffts). Separate multiple with a comma.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Accepted Formats:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              project://projectname/path/to/testcase
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              /full/path/to/testcase

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              project://system_test/regression_test.fftc
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              ${WORKSPACE}/system_test/regression_test.fftc

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • testbed : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify the URI of the testbed or topology to use for execution. Must include file extension. Overrides the testbed specified in the test case file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Accepted Formats:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              /path/to/topology.tbml

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              ${WORKSPACE}/system_test/topologies/demo.tbml

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • params : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify a parameter value in the format parameter=value. Separate multiple parameter/value pairs with a comma.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Note: If you specify both --param and --paramfile in an iTestRT command, then the --param argument takes precedence over the values in the parameter file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • paramFile : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify URI of a parameter file in an iTest readable format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Note: If you specify both --param and --paramfile in an iTestRT command, then the --param argument take precedence over the values in the parameter file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • testReportRequired : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Check this to generate test report in HTML format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A link to the report will be provided on the project page, and the report will be available in the iTest workspace specified in the project configuration page.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • dbCustomTag : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This option enables you to define and assign a value to a custom tag.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Example: Create a tag that holds the build number so that you compare test execution results between builds.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              For tests run against build 54322, use: --tag buildNumber=54322

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Tip: Use a custom tag to identify executions or groups of executions on the iTest Team Server Test Execution page.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ImportFiles'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Imports one or more XML files into the CloudTest server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • cloudTestServerID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Select the server to import objects into.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • files : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Can use wildcards like 'clips/**/*.xml'. See the @includes of Ant fileset for the exact format. The base directory is the workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Optionally specify the 'excludes' pattern, such as "foo/bar/**/*". A file that matches this mask will not be imported even if it matches the mask specified in 'File(s) to import' section.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • mode : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify how to handle importing an object that already exists.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • additionalOptions : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If you need to pass any other command line options to the SCommand utility, specify them here. You can separate options with new lines as well as whitespaces.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • importPackages
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Imports ECU-TEST packages and their attributes from a test management system like RQM or ALM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • importConfigs (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ExportPackageAttributeConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ExportPackageConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • exportPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • createNewPath : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ExportProjectAttributeConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ExportProjectConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • exportPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • createNewPath : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ImportPackageAttributeConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ImportPackageConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ImportPackageDirConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ImportProjectArchiveConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • importConfigPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • replaceFiles : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ImportProjectAttributeConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ImportProjectConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • importMissingPackages : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tmProjectId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ImportProjectDirConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • importProjects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Imports ECU-TEST projects and their attributes from an archive or a test management system like RQM or ALM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • importConfigs (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ExportPackageAttributeConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ExportPackageConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • exportPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • createNewPath : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ExportProjectAttributeConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ExportProjectConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • exportPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • createNewPath : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ImportPackageAttributeConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ImportPackageConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ImportPackageDirConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ImportProjectArchiveConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • importConfigPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • replaceFiles : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ImportProjectAttributeConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ImportProjectConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • importMissingPackages : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tmProjectId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ImportProjectDirConfig'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tmsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • importPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'InfluxDBPublisher'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • userCredentialsID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • dbUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • dbName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • content : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • influxDbQuery
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • checkName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Logical name for the check.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • influxQuery : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              InfluxDB select query supposed to return 1 value. It can be a sum, count or function returning only one value. May use Jenkins tokens such as build number in the query. e.g.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • expectedThreshold : double
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Threshold for the value returned by query result. If exceeded and if Mark Build Unstable is selected, the build will be marked unstable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • markUnstable : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Check if we should mark the build unstable if the threshold is exceeded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • retryCount : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Max number of times to execute the query as a single post-build step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • retryInterval : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Time to wait in between each query in seconds, default to 30s.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • showResults : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Check if we should should display the query results in the Jenkins console.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • insightAppSec
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • region : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The data storage region of the target InsightAppSec instance.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • insightCredentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • appId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The App containing the Scan Config you wish to scan.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • scanConfigId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The Scan Config you wish to scan.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildAdvanceIndicator : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This configuration option can be used to augment how the build advances based on the status of the scan submitted
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Scan has been submitted - Advance the build when the scan has been submitted successfully
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Scan has been started - Advance the build when the scan has been started successfully
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Scan has been completed - Advance the build when the scan has been completed successfully
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Vulnerability results query has returned no vulnerabilities - Advance the build when the scan has been completed and the vulnerability search query has returned no vulnerabilities
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • vulnerabilityQuery : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • An InsightAppSec search query may be supplied to search vulnerabilities found by the scan.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • For example, if you wish to fail the build when high severity vulnerabilities have been found, use:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       vulnerability.severity='HIGH'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • The query supplied will automatically be scoped to the scan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • For more information on vulnerability search queries, consult the InsightAppSec API search documentation here:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                https://help.rapid7.com/insightappsec/en-us/api/v1/docs.html#tag/Search
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • If left blank, the build will fail when any vulnerabilities have been found in the scan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • maxScanPendingDuration : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A max scan pending duration may be provided so that the length of time the CI process takes to provide feedback can be controlled.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • This option is ignored if 'Scan has been submitted' has been selected as the build advance indicator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • The duration will take affect when the scan has been submitted
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Upon reaching the duration, the scan will be cancelled and the build will fail

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The following format must be used for defining a duration:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     0d 5h 30m
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • (d) - Days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • (h) - Hours
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • (m) - Minutes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A quantity must be supplied for each of the above. e.g.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • 1 day: 1d 0h 0m
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • 5 hours: 0d 5h 0m
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • 3 hours, 30 minutes: 0d 3h 30m
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • maxScanExecutionDuration : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A max scan execution duration may be provided so that the length of time the CI process takes to provide feedback can be controlled.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • This option is ignored if 'Scan has been submitted' has been selected as the build advance indicator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • This option is ignored if 'Scan has been started' has been selected as the build advance indicator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • The duration will take affect when the scan moves into scanning state
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Upon reaching the duration, the in-progress scan will be stopped and the build will advance as normal

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The following format must be used for defining a duration:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     0d 5h 30m
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • (d) - Days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • (h) - Hours
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • (m) - Minutes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A quantity must be supplied for each of the above. e.g.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • 1 day: 1d 0h 0m
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • 5 hours: 0d 5h 0m
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • 3 hours, 30 minutes: 0d 3h 30m
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • enableScanResults : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Flag to indicate if scan results should be viewable when a build has finished.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              When enabled, a new action will be provided to view scan results, labeled 'InsightAppSec Scan Results'.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Note: All users with access to view the build job history will be able to view InsightAppSec scan results
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • snInstallApp
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              User name and password defined in global credentials (credentials ID is required here) used for the instance where the application will be installed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • apiVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Optional. Version of the endpoint to access. For example, v1 or v2. Only specify this value to use an endpoint version other than the latest.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • appScope : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Required if application system ID is not specified. The scope name of the application for which to apply the changes, such as x_aah_custom_app. You can locate this value in the scope field in the Custom Application [sys_app] table.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • appSysId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Required if application scope is not specified. The system id of the application for which to apply the changes. You can locate this value in the Sys ID field in the Custom Application [sys_app] table.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • appVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Version of the application to install. If empty, the published version will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • baseAppAutoUpgrade : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Only applicable if Application Customization is active and the associated application is a higher version than the currently installed version. Flag that indicates whether the associated base application should be automatically upgraded to a newer version.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Valid values:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • true: Automatically upgrade the associated application when a newer version becomes available.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • false: Upgrades need to be explicitly installed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Data type: Boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Default: false
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • baseAppVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Only applicable if Application Customization is active. Version of the base application on which to apply the customizations. A base application is any third-party application that comes in the ServiceNow Store.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Data type: String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Default: If the version field in the associated Custom Application [sys_app] or Store Application [sys_store_app] table is set, then that value is used. If the version field is not set.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • url : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              ServiceNow instance url where the application will be installed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'InstallBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • apkFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • uninstallFirst : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • failOnInstallFailure : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • snInstanceScan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              User name and password defined in global credentials (credentials ID is required here) used for the instance (usually where the application will be published).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • apiVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • comboSysId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • requestBody : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • scanType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • suiteSysId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • targetRecordSysId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • targetTable : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • url : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              ServiceNow instance url (usually where the application will be published to).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'IqPolicyEvaluatorBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • iqStage : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Controls the stage the policy evaluation will be run against on the Nexus IQ Server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • iqApplication
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • manualApplication
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • applicationId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify the IQ Application ID. Determines the policy elements (policies, labels, and license threat groups) to associate with this build, and is managed via the Nexus IQ Server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • selectedApplication
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • applicationId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Select an IQ Application from a list of available IQ Applications. Determines the policy elements (policies, labels, and license threat groups) to associate with this build, and is managed via the Nexus IQ Server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • iqScanPatterns
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A list of Ant-style patterns relative to the workspace root that denote the files/archives to be scanned, e.g. **/target/*.war or **/target/*.ear. If unspecified, the scan will default to the patterns **/*.jar, **/*.war, **/*.ear, **/*.zip, **/*.tar.gz.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • scanPattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • iqModuleExcludes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A comma-separated list of Ant-style patterns relative to the workspace root that denote the module information files (**/nexus-iq/module.xml) to be ignored, e.g. **/my-module/target/**, **/another-module/target/**. If unspecified all modules will contribute dependency information (if any) to the scan.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • moduleExclude : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • failBuildOnNetworkError : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Controls the build outcome if there is a failure in communicating with the Nexus IQ Server (e.g. network outage). If checked, the build will be marked as failed. Otherwise, the build is only marked as unstable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • jobCredentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              To use the IQ server credentials configured in Nexus global configuration for this job select - none -, otherwise select different credentials.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • enableDebugLogging : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • advancedProperties : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Provide advanced properties to the IQ Server in <key>=<value> pairs, with each additional property appearing on a new line. eg:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              key1=value1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              key2=value2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • iqInstanceId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'IspwRestApiRequest'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • connectionId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • consoleLogResponseBody : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • ispwAction : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • ispwRequestBody : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • skipWaitingForSet : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'IssueFieldUpdateStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            JiraIssueFieldUpdater can be used to update custom Jira issue field.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • issueSelector (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'DefaultIssueSelector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ExplicitIssueSelector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • issueKeys : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'JqlIssueSelector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • jql : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'P4JobIssueSelector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • fieldId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • fieldValue : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'IssueUpdatesBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • restAPIUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • userName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • password : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • jql : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Similar to:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  'project="A project key as in Jira" and status="The name of the status as in Jira"'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  or
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  'project="A project key as in Jira" and status="The name of the status as in Jira" and fixVersion="A fix version as in Jira"'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • workflowActionName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The name of a workflow action to be executed, depending on your Jira/ Greenhopper workflow configuration. Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  In Testing
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  In Review
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  On Hold
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Resolve Issue
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Stop Progress
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • comment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • customFieldId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The key of the custom field. Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  customfield_10862
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • customFieldValue : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The value to be set to custom field. Build variables and environment variables in format $SOMEVAR are supported. Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ver $VERSION_NUMBER
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • resettingFixedVersions : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If is checked, the existing fixed versions of the issues will be removed before the specified fixed versions be added (overwritten); otherwise the fixed versions will be added to the issues.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  With this option checked, and "Fixed versions to be added" left empty will effectively remove all existing fixed versions of the issues.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • createNonExistingFixedVersions : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If is checked, the given fix versions will be created in the Projects before trying to add them to the Issues otherwise only existing fix versions will be added to the issues.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  With this option checked, and "Fixed versions to be added" left empty will effectively remove all existing fixed versions of the issues.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • fixedVersions : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The human readable names (not ID) of the versions delimited by comma. Build variables and environment variables in format $SOMEVAR are supported. Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Kanban Board, RC, v$VERSION_NUMBER
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The versions are project specific, only the versions that are applicable to the issues are added, others are ignored, for details please consult Jenkins log.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • failIfJqlFails : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • failIfNoIssuesReturned : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • failIfNoJiraConnection : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'JBossBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • operation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • value
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Values: START_AND_WAIT, START, SHUTDOWN, CHECK_DEPLOY
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • properties : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • stopOnFailure : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • serverName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'JIRATicketEditor'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • jiraCredentialsID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  These jira credentials and project will be used to operate on.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • newTicketsTemplates
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Allows you to provide templates for new tickets which will be published on JIRA.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • performDuplicateCheck : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    When checked, the ticket creation will be skipped if a ticket with equal summary already exists.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If the the ticket is a sub-ticket, only tickets with the same parent are considered for the suplicate check.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • parentJQL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If the ticket type is a sub-task, specify here the JQL Query to select this new tickets parent. If the number of tickets matching this query is not exactly one, the build will fail. If the type is not a sub-task, this field is simply ignored.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • title : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The title (also called summary) of the new ticket.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • type : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The type of the new ticket, e.g. task or bug.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • priority : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The priority of the new ticket, e.g. medium.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • description : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    A more detailed description of the issue represented by this ticket.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • envVarName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If not empty, the plugin will store the Ticket-Key of the generated Ticket in this variable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    For example, entering "myissue".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fieldValues
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fieldHumanReadableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The name of the field to be set. The field must have either the type string, number, or version. For versions, the name of the version to set must be given as value.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • valueToSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The value which will be assigned to the given field.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • modifyTicketsTemplates
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Allows you to specify JQL filters along with modifications. The modifications will be applied on all Tickets matching the filter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • jqlFilter : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The plugin will use this JQL-Query to select the tickets to modify from JIRA, see the documentation there on how to write such queries.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • commitRegEx : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    To make use of this option, the build must be triggered by the Github Pull Request builder plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    When the build is then triggered for a certain pull request, the commit messages of all commits associated with this pull request are extracted and
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    matched against the regular expression given in this field. All matches in every commit are then used as ticket keys to select the tickets to modify.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    To specify, what part of the regular expression is the actual ticket key, use a named capturing group with the name "key".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    For example, the regular expression "\[(?&ltkey>.*?)\]" will extract the contents specified in square brackets as Ticket keys.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ticketSource : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • modifications
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'AddCommentModification'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • commentBody : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The value which will be assigned to the given field.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ModifyArrayFieldModification'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • fieldHumanReadableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The name of the field to be set. The field must have either the type string, number, or version. For versions, the name of the version to set must be given as value.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • modificationType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • modificationValue : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The value which will be used to perform the given modification.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Add will add the given value to the field, remove will remove the specified value if it is existent. Replace will first clear the field and then place the given value in it.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'PerformTransitionModification'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • transitionName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The name of the transition to perform.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • comment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The comment to leave as reason for the transition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'SetFieldModification'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • fieldHumanReadableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The name of the field to be set. The field must have either the type string, number, or version. For versions, the name of the version to set must be given as value.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • valueToSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The value which will be assigned to the given field.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'JIRAVersionEditor'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • jiraCredentialsID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  These jira credentials and project will be used to operate on.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • versionModifiactions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • versionName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • replaceDescription : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • descriptionText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • releaseState : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • failOnJQL : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • failQuery : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'JSLintBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • includePattern : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The files to include in an Ant-style filter. See javadoc

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: lib/**/*.js
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This would grab files including lib/foo.js and lib/foo/bar/baz.js

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: lib/*.js
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This would include lib/foo.js but not lib/foo/bar.js

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • excludePattern : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The files to exclude in an Ant-style filter. See javadoc

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: lib/**/ModuleImportProgressDialog.js
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This would omit any file named ModuleImportProgressDialog.js

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • logfile : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The file to output to in a Checkstyle XML format

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: target/jslint.xml

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • arguments : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The arguments to pass to JSLint. You can use any arguments that JSLint supports! Be sure, though, to prefix each argument with -D

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: -Dadsafe=true, -Dcontinue=true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This would activate adsafe and continue

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: -Dpredef=foo,bar,baz
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This would be like having /*global foo,bar,baz*/ at the top of every JavaScript file JSLint runs on.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: -Dpredef=foo,bar,baz, -Dmaxlen=80
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This would be like having /*global foo,bar,baz*/ at the top of every JavaScript file JSLint runs on. It also sets the maximum length of a line to 80 chars.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The default options we use are:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  var defaultOptions = { bitwise: true, eqeqeq: false, immed: false, newcap: false, nomen: false, onevar: false, plusplus: false, regexp: false, rhino: true, undef: true, white: false, forin: true, sub: true, browser: true, laxbreak: true, predef: [ 'Ext', 'jQuery', 'window', '$', 'ActiveXObject', 'SWFObject' ] };
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'JabberBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • builderName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • venafiCodeSignWithJarSigner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tppName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The Venafi Trust Protection Platform (TPP) to use for signing. You can define TPPs under "Manage Jenkins" -> "Configure System" -> "Venafi Code Signing".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • certLabel : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The label of the certificate (inside the TPP) to use for code signing. You can obtain a list of labels with 'pkcs11config listcertificates'.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • extraArgs (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This plugin invokes Jarsigner under the hood. Here you can specify extra custom CLI arguments to pass to Jarsigner.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  These arguments will be appended to the Jarsigner CLI invocation, and take precedence over any arguments implicitly passed by this plugin.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • argument : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • file : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The path to the file to be signed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Either a path or a glob must be given.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • glob : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  A glob that specifies the files to be signed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Either a path or a glob must be given.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timestampingServers (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specifies one or more timestamping authority servers to use during signing. Specifying this is strongly recommended, because it allows signed files to be usable even after the original signing certificate has expired.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If you specify more than one server, then a random one will be used.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Tip: here are some public timestamping authorities that you can use:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • http://timestamp.digicert.com
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • http://timestamp.globalsign.com
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • http://timestamp.comodoca.com/authenticode
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • http://tsa.starfieldtech.com
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • address : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • venafiClientToolsDir : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify the path to the directory in which Venafi CodeSign Protect client tools are installed. If not specified, it's autodetected as follows:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Linux: /opt/venafi/codesign
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • macOS: /Library/Venafi/CodeSigning
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Windows: autodetected from the registry, or (if that fails): C:\Program Files\Venafi CodeSign Protect
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • venafiVerifyWithJarSigner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tppName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The Venafi Trust Protection Platform (TPP) that contains the certificate that the signed file(s) were signed by. You can define TPPs under "Manage Jenkins" -> "Configure System" -> "Venafi Code Signing".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • certLabel : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The label of the certificate (inside the TPP) that was used for signing the file(s). You can obtain a list of labels with 'pkcs11config listcertificates'.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • file : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The path to the file to be verified.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Either a path or a glob must be given.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • glob : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  A glob that specifies the files to be verified.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Either a path or a glob must be given.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • venafiClientToolsDir : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify the path to the directory in which Venafi CodeSign Protect client tools are installed. If not specified, it's autodetected as follows:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Linux: /opt/venafi/codesign
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • macOS: /Library/Venafi/CodeSigning
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Windows: autodetected from the registry, or (if that fails): C:\Program Files\Venafi CodeSign Protect
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'JbpmUrlResourceBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • processId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • SoapUIPro
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • pathToTestrunner : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • pathToProjectFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • environment : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • projectPassword : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testCase : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testCaseTags : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testSuite : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testSuiteTags : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'JigomergeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • source : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • username : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • password : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • oneByOne : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • eager : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • validationScript : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • dryRun : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • verbose : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ignoreMergePatterns : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • commitCommentPrefix : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'JiraEnvironmentVariableBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Extracts Jira information for the build to environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Available variables:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • JIRA_ISSUES - A comma separated list of issues which are referenced in the version control system changelog
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • JIRA_URL - Primary URL for the Jira server

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Typical usage:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                1. Add this build step
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                2. Use the "Progress Jira issues by workflow action" or "Move issues matching JQL to the specified version" with JQL like:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  issue in (${JIRA_ISSUES})

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • issueSelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'DefaultIssueSelector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ExplicitIssueSelector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • issueKeys : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'JqlIssueSelector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • jql : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'P4JobIssueSelector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'JiraExtBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • issueStrategy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      How to find the JIRA issues to update.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'FirstWordOfCommitStrategy'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'FirstWordOfUpstreamCommitStrategy'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MentionedInCommitStrategy'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'SingleTicketStrategy'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • issueKey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The JIRA issue key to use. For example, JENKINS-101
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • extensions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'AddComment'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • postCommentForEveryCommit : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Whether to post a comment to a JIRA ticket for every commit. This is useful if the comment contains stuff specific to the commit, such as commit message.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • commentText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'AddFixVersion'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fixVersion : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The Fix Version to append. Must exist.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'AddLabel'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • labelName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The label to add
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'AddLabelToField'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fieldName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The name of the field. For custom fields this will have something like customfield_12349
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fieldValue : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Space delimited labels to add to field.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Transition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • transitionName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The name of the transition to use. For example: Close, Re-Open, or Resolve
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'UpdateField'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fieldName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The name of the field. For custom fields this will have something like customfield_12349
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fieldValue : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The value of the field to set.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JiraIssueUpdateBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Performs a Jira workflow action for every issue that matches the JQL query. A common use might be to consider a ticket "confirmed" in the last build step of a job, or to mark an issue as "merged" if the job is used to merge changes from one SCM repository to another.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Optionally, include a comment that will be attached to those tickets that are modified as a result of this build step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • jqlSearch : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Issues which match this JQL Query will be progressed using the specified workflow action.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This can contain $PARAM values which will be replaced by the build parameters.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Example:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            project = JENKINS and fixVersion = "$RELEASE_VERSION" and status not in (Resolved, Closed)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            or (e.g., combined with a Jira Issue Parameter, selecting one issue from a JQL result set):
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            issue = $ISSUE_ID

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • workflowActionName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The workflow action to be performed on the selected Jira issues.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Be mindful of the issues being selected by the JQL query, because not all actions are valid for all issue statuses.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            NOTE: the Jenkins user must have access to perform the workflow step, as if the user were logged in and viewing the issue in a web browser.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • comment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            An optional comment to be added to the issue after updating the workflow. If left empty, no comment will be added.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This can contain $PARAM values which will be replaced by the build parameters.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JiraReleaseVersionUpdaterBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • jiraProjectKey : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify the project key. A project key is the all capitals part before the issue number in Jira.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (EXAMPLE-100)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • jiraRelease : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify the name of the parameter which will contain the release version. This can reference a build parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • jiraDescription : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Optional
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify a description of the release version. This can reference a build parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JiraVersionCreatorBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • jiraVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify the name of the parameter which will contain the release version. This can reference a build parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • jiraProjectKey : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify the project key. A project key is the all capitals part before the issue number in Jira.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (EXAMPLE-100)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JobConfigRebrander'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JobDeleteBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • target : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Regular expression of the job to be deleted. Variable will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JobStrongAuthSimpleBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • jobUsers : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Set the users who approve the execution of a job.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • useGlobalUsers : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If checked, append global setting of `Users`.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • jobMinAuthUserNum : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Minimum number of User who approve, which continue the execution of a job.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • useJobExpireTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If checked, check the period which user approved in expire time from build started.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • jobExpireTimeInHours : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The period which treats the time of which as effective recognition from a start time.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              It will not treat, if it is recognized when the time more than the expire time.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JobcopyBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • fromJobName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The name of the job used as the copy source. Variables will be expaneded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • toJobName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The name of the job that will be created or overwritten. Variables will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • overwrite : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Whether to overwrite the job if it already exists.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • jobcopyOperationList
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Additional operations to copy a project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'DisableOperation'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'EnableOperation'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ReplaceOperation'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fromStr : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      A string that will be replaced.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • expandFromStr : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Whether expand variables in From String.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • toStr : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      A string that will be replaced with.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • expandToStr : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Whether expand variables in To String.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • additionalFilesetList
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  You can copy files additional to job main configuration file (config.xml). This is useful for the case some job configurations are stored in another files (e.g. Promoted Builds Plugin). Copy operations can be also applied, but operations are designed for main configuration files, so may not work correctly for other files.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • includeFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Specify files to copy. Multiple files can be specified with separating with comma(,). Wildcard is available like '**/*.xml'. See includes attribute of Ant FileSet Type for the exact format. The base directory is the job directory (${JENKINS_HOME}/jobs/JOBNAME).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • excludeFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Specify files not to copy (even specified in Files field).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • overwrite : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    overwrite or skip the file if it already exists.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • jobcopyOperationList
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'DisableOperation'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'EnableOperation'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'ReplaceOperation'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • fromStr : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            A string that will be replaced.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • expandFromStr : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Whether expand variables in From String.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • toStr : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            A string that will be replaced with.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • expandToStr : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Whether expand variables in To String.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'KanboardTaskFetcher'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • projectIdentifier : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • taskReference : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • taskAttachments : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • taskLinks : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'KarafBuildStepBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • useCustomKaraf : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • karafHome : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • flags : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      -a [port]

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      specify the port to connect to

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      -h [host]

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      specify the host to connect to

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      -u [user]

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      specify the user name

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      -p [password]

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      specify the password (optional, if not provided, the password is prompted)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      -v

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      raise verbosity

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      -l

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      set client logging level. Set to 0 for ERROR logging and up to 4 for TRACE

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      -r [attempts]

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      retry connection establishment (up to attempts times)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      -d [delay]

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      intra-retry delay (defaults to 2 seconds)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      -f [file]

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      read commands from the specified file

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      -k [keyFile]

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      specify the private keyFile location when using key login, need have BouncyCastle registered as security provider using this flag

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      -t [timeout]

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      define the client idle timeout

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • option
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'KarafCommandFileOption'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'KarafCommandScriptOption'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • script : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • unlockMacOSKeychain
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • keychainId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • keychainName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • keychainPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • keychainPwd (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'KlocworkBuildSpecBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Integration analysis (Full)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Use the following steps to perform a Klocwork integration analysis and load the results to the Klocwork Server:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Klocwork - Step 1 (CI/Full) - Capture Build Information runs a Klocwork build specification generation tool to capture compilation information about the project Klocwork - Step 2 (Full) - Run Analysis runs the Klocwork Server analysis engine against the data captured within the build specification Klocwork - Step 3 (Full) - Load Analysis Results runs the Klocwork Server load tool, which imports analysis data into the Klocwork Server database

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Differential Analysis (CI)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Use the following steps to perform a differential analysis, which does not publish the results to the Klocwork Server and only reports the new issues detected since the previous integration analysis. Differential analysis can be used as a quality measure to reduce new issues being added to the Klocwork Server, and can also be configured to only analyze the changed files from the checkin, making the process much quicker:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Klocwork - Step 1 (CI/Full) - Capture Build Information runs a Klocwork build specification generation tool to capture compilation information about the project Klocwork - Step 2 (CI) - Run Differential Analysis runs an analysis only on the changed files by using the Klocwork command line user tool
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • buildSpecConfig
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildCommand : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify your project's build command. This command is used to compile the project and capture information about the build in a build specification file that Klocwork will use for the analysis.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tool : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The Klocwork tool used to generate the build specification, by default this is set to kwinject.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Tools Available: kwinject monitors your C/C++ build to create a build specification kwmaven creates a Java build specification based on the information in your maven build file kwmavenw creates a Java build specification based on the information in your maven wrapper file kwjsspec creates a Javascript build specification file kwpyspec creates a Python build specification file kwktspec creates a Kotlin build specification file kwant creates a Java build specification based on the information in your ant build file create tracefile uses kwinject to create a trace file, mainly used for debugging kwgradle creates a Java build specification based on the information in your Gradle build file kwgradlew creates a Java build specification based on the information in your Gradle wrapper file
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • output : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify the build specification output filename and, optionally, its file path. By default, the build specification is written to kwinject.out in the current working directory. The specified file path can be absolute or relative to the current working directory. By default, the current working directory is the workspace directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • additionalOpts : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify other tool options here. Separate the options with whitespace; surround any arguments with whitespace in double quotes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ignoreErrors : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Ignore any error return codes from this step and continue.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workDir : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify the working directory path from where the Klocwork Build Spec Generation command will be executed. This path must both exist and be relative to the workspace directory. If no value is specified in this field then the Klocwork Build Spec Generation command will be executed from the workspace directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'KlocworkCiBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ciConfig
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildSpec : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Build specification to use for analysis. Path is relative to the workspace
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • cleanupProject : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • reportFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        XML report file in which to store Klocwork results. Optional, in case you want to use the XML report for something custom; otherwise, a default file is created for the post-build step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • additionalOpts : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Additional options added to the kwciagent run command. For example, specify the number of jobs/threads to use (--jobs-num) or which filters to apply (--severity --taxonomy --system)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        See the Klocwork documentation for more information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • incrementalAnalysis : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Analyze changed files only

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This feature allows for quick, incremental analyses of changed source files to enable pre/post-checkin/commit-like behavior . The goal is that only changed files are analyzed by the Klocwork kwciagent tool to replicate the local analysis developers would perform by using our supported IDE plugins or the command line utility. To enable this behavior, the plugin takes a list of the changed files from the SCM; this enables the system to analyze only the changed files when the workspace isn’t kept. Leave this cleared to analyze the whole project, or, if the workspace is kept, to perform a standard incremental analysis.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Diff file list

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The diff file list is the file that contains the changed source files for Klocwork to analyze. All analyzed files must exist in the build specification generated by kwinject.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Note: All files to be analyzed must exist in the build specification.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Using Git

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If using Git, provide the previous commit that Git should perform a "diff" against. The change list between the current commit and the specified previous commit will be added to the diff file list for Klocwork to process by automatically calling "git diff <previous_commit>" during the build. Note: If you are using Git jenkins plugin to obtain source files for you pipeline job be sure to use 'Pipeline script from SCM' and specify the previous commit with the environment variable, 'GIT_PREVIOUS_COMMIT'. Also be aware that the first build in the job won't be able to access GIT_PREVIOUS_COMMIT and the first build will run full CI analysis.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Manual

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If you are not using Git, or want to manually generate the change list by using Git, select this option. You will need to generate the diff file list by using a custom build-step (or similar). List one changed source file on each line of the file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • differentialAnalysisConfig
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • diffType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • gitPreviousCommit : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • diffFileList : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'KlocworkServerAnalysisBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serverConfig
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildSpec : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Build specification to use for analysis. Path is relative to the workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tablesDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify the location of the tables directory, for example, ${MY_VAR}/kwtables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • incrementalAnalysis : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ignoreCompileErrors : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Ignore compile errors encountered by kwbuildproject. This setting will not ignore a return code that indicates that kwbuildproject failed to the extent that no results are generated.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • importConfig : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Optionally, provide configuration files to import to the project before running the analysis. If the checker configuration (for example, analysis_profile.pconf) is under version control, you can provide the file here and it will be automatically imported for each build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify multiple files by separating them with commas (",").
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • additionalOpts : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • disableKwdeploy : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        By default, kwdeploy runs before the analysis, to ensure the checkers are up-to-date. Enable this setting if you don't want kwdeploy to run before the analysis.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • duplicateFrom : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Optional setting to specify the name of an existing Klocwork project. Klocwork will duplicate that project's configuration settings.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • enabledCreateProject : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Enable to create a new Klocwork project on the server if one does not exist with the name specified. This can be useful when using multi-branch pipeline jobs.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'KlocworkServerLoadBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serverConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tablesDir : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify the name of the build for the Klocwork server, for example, ${MY_VAR}-${GIT_COMMIT}. If empty, Klocwork uses an auto increment to name the builds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • additionalOpts : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • reportConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • displayChart : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • chartHeight : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • chartWidth : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • query : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'KlocworkXSyncBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • syncConfig
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • dryRun : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Cross synchronisation reads and writes to the Klocwork database. Therefore, we strongly recommend that you first try a Dry Run of the command (which skips the writing) and verify that the command works as expected.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • lastSync : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify the "last synchronisation" date (how far back Klocwork should go when synchronising issue citations).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Format is "DD-MM-YYYY hh:mm:ss".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For example, "03-00-0000 00:00:00" will go back 3 days in time.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectRegexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        A regular expression that is used to retrieve Klocwork projects that should be processed during synchronisation. If you want to process all projects, leave empty.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For example, if you prepend projects with "DEPT-" to indicate a particular department the regular expression "^DEPT-" will match all these projects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • statusAnalyze : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • statusIgnore : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • statusNotAProblem : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • statusFix : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • statusFixInNextRelease : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • statusFixInLaterRelease : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • statusDefer : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • statusFilter : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • additionalOpts : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Additional options added to the kwxsync command.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        See the Klocwork documentation for more information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'KojiBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • kojiBuild : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Koji build ID, can be NVR or maven coordinate with release number suffix.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • kojiTarget : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • kojiPackage : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • kojiOptions : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • kojiTask : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • kojiScratchBuild : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • kojiScmUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • cfyKubernetes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • allowNodeRedefinition : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • apiKeyCredentialsId : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The ID of the credentials entry that contains the API key.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This parameter is optional; the API key may also be provided through "API options", however this method is preferred.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If provided, then this credentials entry must either be of type "text" or "file". In the latter case, the file is read as-is and the resultant string is used as the API credentials.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • apiKeyFile : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Path to file, relative to the Jenkins workspace, containing the API key.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This parameter is optional, as the API key may be provided by other means.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • caCert : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Path, relative to the workspace's root, of a file containing the CA certificates store to use for verifying the Kubernetes host's certificate.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • credentialsId : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The ID of the credentials to use when accessing Cloudify. Parameters' expansion is supported when using freestyle jobs.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • debugOutput : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If checked, then printed Cloudify events and logs will include debug-level records.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • definition (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Type: java.util.Map<java.lang.String, java.lang.Object>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • definitionAsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The Kubernetes application definition.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • definitionFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Path, relative to the Jenkins workspace root, to a file containing the Kubernetes application definition.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • deploymentId : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      ID to assign to the created Cloudify deployment. If not provided, one will be randomly generated. You can obtain the deployment ID from the "environment data" output file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • echoEnvData : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If checked, then the created environment's data will be printed to the job's log.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • echoInputs : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If checked, then the Cloudify deployment inputs are echoed to the Jenkins log.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • envDataLocation : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Path to a file that will contain the created environment's data. If not provided, the environment data won't be written.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • gcpCredentialsFile : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      A YAML/JSON file containing GCP service account details, to use for authentication against GCP.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This parameter is optional, and is only relevant for authenticating against GCP.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If provided, it should follow the same layout as described in the "GCP Credentials ID" parameter.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • gcpCredentialsId : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The ID of the credentials to be used for authentication against GCP.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This parameter is optional, and is only relevant for authenticating against GCP.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If provided, it should be the ID of either a string-type or file-type credentials entry, with the standard GCP service account YAML/JSON syntax:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        "type": "...",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        "project_id": "...",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        "private_key_id": "...",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        "private_key": "...",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        "client_email": "...",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        "client_id": "...",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        "auth_uri": "...",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        "token_uri": "...",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        "auth_provider_x509_cert_url": "...",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        "client_x509_cert_url": "..."
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • k8sDebug : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • k8sMaster : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The Kubernetes master host to use. This can also be provided through the API Options field; it is available as a separate parameter for convenience.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • namespace : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The application's namespace. Note: value provided here will overwrite the namespace value in the options field, if exists.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • options (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Type: java.util.Map<java.lang.String, java.lang.Object>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • optionsAsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Kubernetes options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • optionsFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Path, relative to the Jenkins workspace root, to a file containing Kubernetes options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • skipSslVerification : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • sslCertFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Path, relative to the workspace's root, of a file containing the certificate presented to the Kubernetes host.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • sslKeyFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Path, relative to the workspace's root, of a file containing the key for the certificate presented to the Kubernetes host.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • tenant : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • validateStatus : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If checked, then the status of the Kubernetes application is validated after provisioning.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'KubernetesDeploy'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • context
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • configs : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The path patterns for the Kubernetes configurations you want to deploy, in the form of Ant glob syntax.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsType : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Choose how to get the kubeconfig file to authenticate with the Kubernetes cluster management endpoint.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        3 options are supported:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        1. Authenticate with Kube config file - Get the kubeconfig file from the workspace path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        2. Fetch cluster details through SSH connection to the master node - Get the ~/.kube/config file through an SSH connection to the master node.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        3. Fill credentials details directly - Fill the contents in kubeconfig file directly.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        See also: Configure kubectl

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • deleteResource : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Whether to delete the resource, if it is true, delete all resources in the config file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • dockerCredentials (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          URL to the Docker registry you are using. May be left blank to use the public DockerHub registry (currently https://index.docker.io/v1/).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • enableConfigSubstitution : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Substitute variables (in the form $VARIABLE or ${VARIABLE}) in the configuration with values from Jenkins environment variables.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This allows you to use dynamic values produced during the build in your Kubernetes configurations, e.g., a dynamically generated Docker image tag which will be used later in the deployment.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • kubeConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • path : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The kubeconfig file path relative to the current Jenkins workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • kubeconfigId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • secretName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The secret name that you can use in the Kubernetes Deployment configuration for the imagePullSecrets entry. Environment variable substitution are supported for the name input, so you can use available environment variables to construct the name dynamically, e.g., some-secret-$BUILD_NUMBER. The name should be in the pattern [a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*, i.e., dot (.) concatenated sequences of hyphen (-) separated alphanumeric words. (See Kubernetes Names)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If left blank, the plugin will generate a name based on the build name.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The secret name will be exposed with the environment variable $KUBERNETES_SECRET_NAME. You can use this in your Kubernetes configuration to reference the updated secret when the "Enable Variable Substitution in Config" option is enabled.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        apiVersion: extensions/v1beta1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        kind: Deployment
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        metadata:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          name: nginx
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        spec:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          replicas: 1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          template:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            metadata:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              labels:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                app: nginx
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            spec:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              containers:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              - name: nginx
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                image: some.private.registry.domain/nginx
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                ports:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                - containerPort: 80
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              imagePullSecrets:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              - name: $KUBERNETES_SECRET_NAME
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Note that once the secret is created, it will only be updated by the plugin. You have to manually delete it when it is not used anymore. If this is a problem, you may use fixed name so every time the job runs, the secret gets updated and no new secret is created.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • secretNamespace : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The Kubernetes namespace in which the secrets will be created with the credentials configured below.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ssh (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sshCredentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The SSH login credentials. Can be:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Username with password, or
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • SSH Username with private key
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sshServer : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The SSH server address (<host>[:<port>]) of the Kubernetes master node. If port is omitted, the default SSH port 22 will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • textCredentials (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • certificateAuthorityData : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The clusters.cluster.certificate-authority-data value in the kubeconfig file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • clientCertificateData : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The users.user.client-certificate-data value in the kubeconfig file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • clientKeyData : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The users.user.client-key-data value in the kubeconfig file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • serverUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The clusters.cluster.server address in the kubeconfig. Generally, it should start with https://.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • kubernetesEngineDeploy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cluster : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • clusterName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • location : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • manifestPattern : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • namespace : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • projectId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • verboseLogging : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • verifyDeployments : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • verifyServices : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • verifyTimeoutInMinutes : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • zone : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • loadcompletetest
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • project : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • test : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • actionOnErrors : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • actionOnWarnings : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • executorVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • generateMHT : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • generatePDF : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • useTimeout : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • leanIXMicroserviceIntelligence
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • apitoken (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • dependencymanager : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • deploymentstage : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • deploymentversion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • hostname : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • jobresultchoice : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • lxmanifestpath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • mavensettingspath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • useleanixconnector : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • lacework
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • customFlags : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify any desired command-line flags to be passed to the Lacework scanner.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fixableOnly : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Whether the build step should only return information for fixable vulnerabilities.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • imageName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • imageTag : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • noPull : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Whether the build step should attempt to pull container images that don't exist locally.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • evaluatePolicies : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Whether the build step should evaluate against policies which are assigned in the Lacework platform.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • saveToLacework : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Whether the build step should save assessment results to the Lacework platform.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • disableLibraryPackageScanning : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Whether the build step should disable scanning of programming language libraries.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • showEvaluationExceptions : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Whether the build step should display evaluation exceptions.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • tags : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify any desired tags, in JSON key/value format, to be assigned to the Lacework scanner assessment.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • eventSourceLambda
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • lambdaEventSourceBuildStepVariables
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • awsRegion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • functionName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • eventSourceArn : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • awsAccessKeyId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • awsSecretKey : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • functionAlias : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • useInstanceCredentials : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • invokeLambda
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • lambdaInvokeBuildStepVariables
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • awsRegion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • functionName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • synchronous : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • awsAccessKeyId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • awsSecretKey : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • jsonParameters (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • envVarName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • jsonPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • payload : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • useInstanceCredentials : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • publishLambda
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • lambdaPublishBuildStepVariables
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • awsRegion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • functionARN : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • functionAlias : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • versionDescription : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • awsAccessKeyId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • awsSecretKey : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • useInstanceCredentials : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • deployLambda
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • lambdaUploadBuildStepVariables
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • awsRegion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • functionName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • updateMode : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • alias : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • artifactLocation : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • awsAccessKeyId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • awsSecretKey : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • createAlias : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • deadLetterQueueArn : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • description : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • enableDeadLetterQueue : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • environmentConfiguration (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • environment
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • key : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • configureEnvironment : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • kmsArn : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • handler : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • memorySize : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • publish : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • role : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • runtime : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • securityGroups : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • subnets : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • timeout : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • useInstanceCredentials : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'LeapworkJenkinsBridgeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • leapworkHostname : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Enter Leapwork Controller hostname or IP
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • leapworkPort : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Enter Leapwork controller API port, by default it is 9001.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • leapworkAccessKey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Enter Leapwork API Access key. If it is invalid or empty, 401 error will be returned.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • leapworkSchNames : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Press button "Select schedules" and you will get all available schedules of your controller which address you've entered before. Use checkboxes to select the schedules you want. Also you can paste list of schedule names, be noticed that they should be separated by new line or comma. WARNING: by clicking a checkbox all schedule names, that DO NOT EXIST OR DISABLED on controller will be removed from the list of schedules in build configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • leapworkSchIds : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • leapworkDelay : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      During this time, plugin is going to wait before it tries to get schedule state. If schedule is still running, plugin will wait again.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      By default this value is 5 seconds. It is strongly recommended not to use less value, because if plugin tries to get schedule state and the controller has not created it yet, controller will return 500 error code and your schedule will become Invalid for the plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • leapworkDoneStatusAs : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Choose how plugin should interprete "Done" status: as "Failed" or as "Success".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • leapworkReport : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Report file name:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The result of the scheduled tests is saved to an xml file. Per default this file is named "report.xml", but if you are using other build or post build plugins, this file name can already be in use. If so, change the name to something unique. The result file is saved in the following location: "{User path to Jenkins}/Jenkins/workspace/{JOB_NAME}/" To read the generated report files into the build project, add the "Publish Junit test result report" plugin as a "post-build action". In this plugin, use the report file name specified in the Leaptest plugin in 'Test Report XMLs" field (most likely "report.xml"), and please ignore any warnings that the file can't be found - it will be created later.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      >
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • leapworkScheduleVariables : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Write here schedule variables in "key : value" format. All the variables will be available for all schedules in schedule list to run. Variable key - value pairs must be new line or comma separated. Key and value must be separated with ":" only. WARNING: all key duplicated variables will be ignored.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • leapworkWritePassedFlowKeyFrames : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If selected, keyframes of passed flows will be written to the report file. WARNING: JUnit parser will set all passed flows to "Failed" status, because keyframes are written to "failure" block
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'LeiningenBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • task : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Provide leiningen task and arguments here. task can be any of:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • check
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • help
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • repl
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • uberjar
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • classpath
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • install
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • retest
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • upgrade
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • clean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • jar
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • version
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • compile
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • javac
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • search
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • with-profile
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • deploy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • plugin
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • show-profiles
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • deps
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • pom
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • test
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • do
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • repeat
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • trampoline
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • subdirPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Subdirectory path relative to workspace to run Leiningen in.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • checkETLicense

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Check ECU-TEST license.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Pipelines usage:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Signatures:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    checkETLicense(String toolName) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    checkETLicense('ECU-TEST')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • toolName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • installation (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • home : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • properties
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Type: ? extends hudson.tools.ToolProperty<?>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • lighthouseReport
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      JSON report file to load
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Report name (Optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • dotnetListPackage
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The dotnet list package command provides a convenient option to list all NuGet package references for a specific project or a solution. You first need to build the project in order to have the assets needed for this command to process.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • charset : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The character set to use for the step's output. If not specified, the charset associated with the build will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • config : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Configuration file containing the NuGet sources to use when searching for newer packages. Requires the --outdated, --deprecated or --vulnerable option.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • continueOnError : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If this is checked, errors encountered will cause the build status to be set to FAILURE (or UNSTABLE, if configured that way), but the build will be allowed to continue. Otherwise, any such errors will cause the build to be terminated immediately.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • deprecated : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Lists packages that have been deprecated. Cannot be combined with --vulnerable or --outdated options.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Available since: .NET Core SDK 3.1.300
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • framework : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • frameworks : Array / List of String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • frameworksString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Displays only the packages applicable for the specified target frameworks.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • highestMinor : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Considers only the packages with a matching major version number when searching for newer packages. Requires the --outdated option.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • highestPatch : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Considers only the packages with a matching major and minor version numbers when searching for newer packages. Requires the --outdated option.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • includePrerelease : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Considers packages with prerelease versions when searching for newer packages. Requires the --outdated option.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • includeTransitive : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Lists transitive packages, in addition to the top-level packages. When specifying this option, you get a list of packages that the top-level packages depend on.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • outdated : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Lists packages that have newer versions. Cannot be combined with --deprecated or --vulnerable options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • project : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The project or solution file to operate on. If not specified, the command searches the current directory for one. If more than one solution or project is found, an error is thrown.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sdk : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Name of a .NET SDK to use so that dotnet will be in the path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If the default is specified, you either need to use the With .NET element (or a withDotNet block in a pipeline script) to specify one, or ensure this step runs on a node that has a .NET SDK installed and in the path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • showSdkInfo : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If enabled, dotnet --info will be executed before the main command. This shows a list of available SDKs and runtimes, indicating which one is currently being used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • source : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sources : Array / List of String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sourcesString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The NuGet sources to use when searching for packages. Requires the --outdated>, --deprecated> or --vulnerable> option.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • specificSdkVersion : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Depending on the platform, the dotnet executable may use the most recent SDK available on the system, even when PATH is set up to find an older SDK deployment first; see this page for more information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          By enabling this option, the configured SDK home directory will be checked, and if it only includes a single SDK deployment, a global.json file will be created in the current directory, referencing that SDK version and disabling roll-forward.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Note: This will silently overwrite any global.json already present in the current directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • verbosity : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Sets the verbosity level of the command.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Note that this option only has an effect since the .NET 5 SDK.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • vulnerable : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Lists packages that have known vulnerabilities. Cannot be combined with --deprecated or --outdated options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Available since: .NET Core SDK 5.0.200
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • workDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The directory in which to execute the command. By default, this is the current directory (for freestyle jobs, that is the root of the job's workspace).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'LoadImpactTestRunTask'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • apiTokenId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • loadTestId : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • criteriaDelayValue : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • criteriaDelayUnit : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • criteriaDelayQueueSize : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • abortAtFailure : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • thresholds
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • metric : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • operator : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • value : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • result : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • pollInterval : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • logHttp : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • logJson : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'LoadNinjaBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • apiKey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Your LoadNinja API KEY.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scenarioId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The Scenario Id of the Load Ninja load test you want to run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • oeb
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • errorPassCriteria : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • odb
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • durationPassCriteria : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'LoadPluginBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The url used to connect to ICN, as http(s)://host:port/navigator/, can be a variable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • username : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The username of an ICN administrator, can be a variable. This user needs to have access to the admin desktop and be able to configure plug-ins.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • password : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The password used to connect to ICN, can be a variable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          This the location of the jar file on the server, for instance /opt/IBM/ECMClient/plugins/myplugin.jar, can be a variable. The file needs to be copied first via another build task, this plug-in does not copy the file for you. You can use an SSH copy, FTP, NFS share, ... If ICN is deployed on a cluster, you have to replace the jar on all instances, except if you already have the plug-in in a shared location.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • greet
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • testId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'LoadtestBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • loadtestBuilderModel
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • environmentShortName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • authToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Enter your LTP authentication token
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • presetName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The name of the load test preset as you saved it in LTP.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • loadtestScenario : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The name of the load test scenario to run the loadtest with e.g myscenario.class or scenario1.zip
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • loadtestThresholdParameters
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • metricType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • evaluationDirection : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • numericValue : double
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • dotnetNuGetLocals
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The dotnet nuget locals command clears or lists local NuGet resources in the http-request cache, temporary cache, or machine-wide global packages folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • cacheLocation : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The cache location to list or clear. It accepts one of the following values:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • all: Indicates that the specified operation is applied to all cache types: http-request cache, global packages cache, and the temporary cache.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • global-packages: Indicates that the specified operation is applied only to the global packages cache. The other cache locations aren't affected.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • http-cache: Indicates that the specified operation is applied only to the http-request cache. The other cache locations aren't affected.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • temp: Indicates that the specified operation is applied only to the temporary cache. The other cache locations aren't affected.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • charset : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The character set to use for the step's output. If not specified, the charset associated with the build will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • continueOnError : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If this is checked, errors encountered will cause the build status to be set to FAILURE (or UNSTABLE, if configured that way), but the build will be allowed to continue. Otherwise, any such errors will cause the build to be terminated immediately.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • forceEnglishOutput : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Forces the application to run using an invariant, English-based culture.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • operation : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Two operations are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • clear: The contents of the cache directories are deleted recursively. The executing user/group must have permission to the files in the cache directories. If not, an error is displayed indicating the files/folders that weren't cleared.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • list: Displays the path to the specified cache location.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sdk : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Name of a .NET SDK to use so that dotnet will be in the path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If the default is specified, you either need to use the With .NET element (or a withDotNet block in a pipeline script) to specify one, or ensure this step runs on a node that has a .NET SDK installed and in the path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • showSdkInfo : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If enabled, dotnet --info will be executed before the main command. This shows a list of available SDKs and runtimes, indicating which one is currently being used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • specificSdkVersion : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Depending on the platform, the dotnet executable may use the most recent SDK available on the system, even when PATH is set up to find an older SDK deployment first; see this page for more information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          By enabling this option, the configured SDK home directory will be checked, and if it only includes a single SDK deployment, a global.json file will be created in the current directory, referencing that SDK version and disabling roll-forward.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Note: This will silently overwrite any global.json already present in the current directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • workDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The directory in which to execute the command. By default, this is the current directory (for freestyle jobs, that is the root of the job's workspace).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'LoginBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Credentials to a Turbo account which will be used to execute the build script.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • hubUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Optional parameter. The hub server to use. Example: https://turbo.net.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • mabl
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • restApiKeyId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          ID of the mabl API key credential for your workspace. The key is kept safely in Jenkins credentials using Secret text kind. Make sure that you set the ID of the credential as IDs are used to select the credential from the drop-down list. The scope of the credential must be Global and the credential may be kept in any domain (including the unrestricted Global credentials or any other domain). More info.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • environmentId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Input a valid API key to populate the environment selection drop-down.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • applicationId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Input a valid API key to populate the application selection drop-down.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • apiBaseUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • appBaseUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • continueOnMablError : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          continue build, if error occurred in mabl system (e.g. connection failure, system outage)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • continueOnPlanFailure : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          continue build, even if triggered Plans do not complete successfully (e.g. bad assertion)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • disableSslVerification : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          disable SSL verification (only required if Jenkins is behind a MITM proxy)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • labels : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Comma-separated list of labels.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • mablBranch : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          mabl will run tests using this mabl branch name. Note that this branch is not the branch name in the source control repository. The branch in mabl must exist before triggering the tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'MailCommandBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         To recieve e-mail that CLI command is written, set properties.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        POP3 mail server address Set POP3 mail server's hostname or ip address.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        POP3 mail server port Set POP3 mail server's port. Default value is 110.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        POP3 User Name Set POP3 mail server's user account.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        POP3 Password Set POP3 mail server's password.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • address : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • port : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • username : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • password : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'MakeAppTouchTestable'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Makes the specified project compatible with SOASTA TouchTest, by adding the TouchTest Driver library.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • cloudTestServerID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Select the server to download MakeAppTouchTestable.zip from. This also specifies where any required Mobile App objects should be created.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • inputType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Defines the type of input file that will be made TouchTestable. See Input File help for more details.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • projectFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The type of file (or directory) being made TouchTestable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Project instruments the source code of an iOS or Android project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • APK instruments the binary content of a compiled Android .apk file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • IPA instruments the binary content of a compiled iOS .ipa file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • iOS App Bundle instruments the binary content of an iOS application bundle (.app directory).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          More information can be found here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • target : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For iOS apps, this specifies the Xcode target that MakeAppTouchTestable should modify.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • launchURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The URL that TouchTest Agent should use to launch the app (e.g. "myapp://"). If no launch URL is specified, then MakeAppTouchTestable will automatically generate one.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • backupModifiedFiles : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Create a backup of any file that is modified by MakeAppTouchTestable. The backup files will be stored in a timestamped sub-directory of the project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • additionalOptions : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If you need to pass any other command line options to the MakeAppTouchTestable utility, specify them here. You can separate options with new lines as well as whitespaces.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • javaOptions : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Add additional JVM arguments. Default (when no value is given): -Xmx1024m
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ManageInstance'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • cloud : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • workspace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The workspace in ElasticBox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • operations
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Type: ? extends com.elasticbox.jenkins.builders.Operation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'MatlabBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • matlabRoot : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Enter the full path to the MATLAB root folder, which is returned by the matlabroot function.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Example:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Windows:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          C:\Program Files\MATLAB\R2019a
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Linux:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          /usr/local/MATLAB/R2019a
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Mac:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          /Applications/MATLAB_R2019a.app

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Note: If the job runs on a remote agent, you must specify the full path to MATLAB root folder on the remote agent.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • testRunTypeList (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Select the test run mode from the following options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Run Tests Automatically: Runs all tests in the Jenkins workspace, including tests in subfolders.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Use Custom MATLAB Command: Use your own custom MATLAB commands or script file to run your tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'RunTestsAutomaticallyOption'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • taCoberturaChkBx : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Generate a Cobertura code coverage report, named cobertura.xml, to be stored in the matlabTestArtifacts folder of the current Jenkins workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • taJunitChkBx : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Generate a JUnit style test report, named junittestresults.xml, to be stored in the matlabTestArtifacts folder of the current Jenkins workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • taModelCoverageChkBx : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Generate a Cobertura model coverage report, coberturamodelcoverage.xml, and save it in the matlabTestArtifacts folder of the Jenkins workspace. This report includes coverage results for Simulink® models that are tested using Simulink Test™.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Note: This feature requires a Simulink Coverage™ license and is supported only in MATLAB R2018b or a newer release.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • taPDFReportChkBx : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Generate a test report in PDF format, testreport.pdf, and save it in the matlabTestArtifacts folder of the Jenkins workspace.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Due to Jenkins Content Security Policy rules, the generated report might not open properly from within the Jenkins workspace. Consider copying the report to a location outside the workspace and opening it from there. For more information, see Configuring Jenkins Content Security Policy.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Note:This feature is not currently supported on MacOS platforms.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • taSTMResultsChkBx : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Export Simulink Test™ Manager results in MLDATX format, simulinktestresults.mldatx, and save them in the matlabTestArtifacts folder of the Jenkins workspace.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Note: This feature requires a Simulink Test license and is supported only in MATLAB R2019a or a newer release.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tatapChkBx : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Generate a TAP style test report, named taptestresults.tap, to be stored in the matlabTestArtifacts folder of the current Jenkins workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'RunTestsWithCustomCommandOption'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • customMatlabCommand : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            To run your tests, enter MATLAB commands separated by semicolons.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Example: cd c:\MATLAB\tests; runtests('IncludingSubfolder','true');

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Recommendation:If you require a number of MATLAB commands to execute your build, consider writing a MATLAB script and executing the script file instead.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Note: The build will fail if the execution of any MATLAB command causes an error.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • maven
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • targets : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • pom : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • properties : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Properties needed by your Maven build can be specified here (in the standard properties file format):
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          # comment
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          name1=value1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          name2=value2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          These are passed to Maven like "-Dname1=value1 -Dname2=value2"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • jvmOptions : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • usePrivateRepository : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • settings
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The settings element in the settings.xml file contains elements used to define values which configure Maven execution in various ways, like the pom.xml, but should not be bundled to any specific project, or distributed to an audience. These include values such as the local repository location, alternate remote repository servers, and authentication information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          There are two locations where a settings.xml file per default may live:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • The Maven install - default: $M2_HOME/conf/settings.xml
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • A user's install - default: ${user.home}/.m2/settings.xml
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The former settings.xml are also called global settings, the latter settings.xml are referred to as user settings. If both files exists, their contents gets merged, with the user-specific settings.xml being dominant.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          see also: settings.xml reference

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • standard
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use default maven settings ($HOME/.m2/settings.xml) as set on build node.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • filePath
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Use a custom settings.xml file. Such a file is checked out from SCM as part of the job or a well known location.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • path : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Path to settings.xml file, relative to project workspace or absolute (variables are supported).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'MvnSettingsProvider'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              select the provided settings.xml for this project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • settingsConfigId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • globalSettings
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • standard
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Use default maven settings ($HOME/.m2/settings.xml) as set on build node.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'FilePathGlobalSettingsProvider'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Use a custom global settings.xml file from job workspace. Such a file is checked out from SCM as part of the job or a well known location.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • path : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Path to settings.xml file, relative to project workspace or absolute (variables are supported).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'MvnGlobalSettingsProvider'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                select the provided global settings.xml for this project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • settingsConfigId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • injectBuildVariables : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Pass all build variables into maven process in form of java properties. This is seldom needed as Jenkins provides it as environment variables anyway. Preferred way to access Jenkins build variables is to explicitly map it to property in Properties section (MY_VAR=${MY_VAR}).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Maven3Builder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • mavenName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • rootPom : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • goals : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • mavenOpts : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • useWrapper : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MavenDeploymentDownloader'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This builder allows to download artifacts which where uploaded to a maven repository. The source project must have the 'Link to maven deployments' option enabled.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projectName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The project/job from which the artifacts should be copied from. This project must have the 'Link to maven deployments' option enabled, only artifacts which where recorded by the maven deployment linker plugin can be downloaded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • filePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              All files matching this pattern will be copied to the target location. (default: .*)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • permaLink : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Which build of the project should the artifacts be copied from?
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • targetDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The directory to copy the files to.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • stripVersion : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Should the version be striped of the filenames?
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              With the 'Strip Version Pattern' in the advanced section, one is able to overwrite how the striping is done.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • stripVersionPattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              (optional) The regular expression used to strip the version of the files. The first group of the pattern will be used as the name of the target file and the last group will be used as the extension of the file. e.g. (firstGroup).(lastGroup)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • failIfNoArtifact : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Should the build fail if there was no artifact found to download?
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • cleanTargetDir : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Should the content of the target directory be deleted first?
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MavenSealightsBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • beginAnalysis
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • logLevel
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Values: OFF, INFO, DEBUG, WARN, ERROR
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • buildSessionId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • appName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • moduleName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • branch : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • enableMultipleBuildFiles : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • overrideJars : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • multipleBuildFiles : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • labId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • testStage : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • packagesIncluded : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • packagesExcluded : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • filesIncluded : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • filesExcluded : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • classLoadersExcluded : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                In order to exclude class loaders from the build, please provide comma separated list of class loaders names to exclude. Class loader name should be the class loader full package name. e.g. 'com.example.package.SomeClassLoader'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • recursive : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • workspacepath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • buildScannerJar : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • testListenerJar : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • testListenerConfigFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • autoRestoreBuildFile : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • sealightsMavenPluginInstallationArguments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • buildFilesPatterns : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • buildFilesFolders : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • logEnabled : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • logDestination
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Values: CONSOLE, FILE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • logFolder : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • buildStrategy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Values: ONE_BUILD, BUILD_EACH_MODULE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • slMvnPluginVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • buildName
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'DefaultBuildName'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'EmptyBuildName'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'LatestBuildName'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ManualBuildName'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • insertedBuildName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'UpstreamBuildName'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • upstreamProjectName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • executionType
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Values: FULL, TESTS_ONLY, ONLY_LISTENER
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • override_customerId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • override_url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • override_proxy : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • additionalArguments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This section allows you to add additional arguments, as key-value pairs.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Example for additional arguments:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      server=https://prod-sealights-gw.sealights.co
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      proxy=http://localhost:8888

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Argument name Description
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      token The token provided to you by SeaLights (override the global 'token' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      tokenfile A file containing the token provided to you by SeaLights (override the global 'token' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      buildsessionidfile Set build session id file for this build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      createbuildsessionid When set to 'true' - forces SeaLights Maven Plugin to create new build session id (true by default).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      proxy A valid URL to a proxy server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      agentpath Override the path to SeaLights jar.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      javapath Override the path to the 'java' variable (default is 'java').
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      filesstorage A folder where sealights files for this build will be kept (override the global 'Files storage' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      sealightsJvmParams Key value pairs of environments variables which will be added to both buildscanner and test listener ('$$$'- separated pairs, ':'- separated key and value. i.e: sealightsJvmParams=param:value$$$anotherparam:anothervalue)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      buildScannerParams Key value pairs of environments variables which will be added to buildscanner ('$$$'- separated pairs, ':'- separated key and value. i.e: buildScannerParams=param:value$$$anotherparam:anothervalue)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      testListenerJvmParams Key value pairs of environments variables which will be added to test listener ('$$$'- separated pairs, ':'- separated key and value i.e: testListenerJvmParams=param:value$$$anotherparam:anothervalue)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • includeResources : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      When checked, the build session id and token files will be added to the artifacts as as resources in the folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • buildStepMode
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'DisableSealightsView'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • targets : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'InvokeMavenCommandView'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • targets : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OffView'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'PrepareSealightsView'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • additionalMavenArguments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pom : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • properties : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Properties needed by your Maven build can be specified here (in the standard properties file format):
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      # comment
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      name1=value1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      name2=value2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      These are passed to Maven like "-Dname1=value1 -Dname2=value2"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • jvmOptions : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • usePrivateRepository : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • settings
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The settings element in the settings.xml file contains elements used to define values which configure Maven execution in various ways, like the pom.xml, but should not be bundled to any specific project, or distributed to an audience. These include values such as the local repository location, alternate remote repository servers, and authentication information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      There are two locations where a settings.xml file per default may live:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • The Maven install - default: $M2_HOME/conf/settings.xml
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • A user's install - default: ${user.home}/.m2/settings.xml
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The former settings.xml are also called global settings, the latter settings.xml are referred to as user settings. If both files exists, their contents gets merged, with the user-specific settings.xml being dominant.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      see also: settings.xml reference

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • standard
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Use default maven settings ($HOME/.m2/settings.xml) as set on build node.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • filePath
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Use a custom settings.xml file. Such a file is checked out from SCM as part of the job or a well known location.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • path : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Path to settings.xml file, relative to project workspace or absolute (variables are supported).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'MvnSettingsProvider'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          select the provided settings.xml for this project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • settingsConfigId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • globalSettings
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • standard
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Use default maven settings ($HOME/.m2/settings.xml) as set on build node.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'FilePathGlobalSettingsProvider'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use a custom global settings.xml file from job workspace. Such a file is checked out from SCM as part of the job or a well known location.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • path : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to settings.xml file, relative to project workspace or absolute (variables are supported).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MvnGlobalSettingsProvider'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            select the provided global settings.xml for this project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • settingsConfigId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • mavenSnapshotCheck
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • check : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          This will check the SNAPSHOT of pom.xml if you check the checkbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'MdtoolSolutionBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • installationName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • solutionPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Give the Solution file (.sln) from the module root (SCM root directory or workspace directory) that plugin will use to build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          You can use build variables through the syntax ${var}.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • target
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Name of the target: Build or Clean.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Supported targets:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Build: build the project (the default target).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Clean: clean the project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • configuration
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Name of the solution configuration to build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Name of the project to build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • runtime
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Prefix of the Mono runtime to build against.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • measure
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • VMs : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • clazzFolders : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • createDefaultConstructor : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • directlyMeasureKieker : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • displayLogs : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • displayRCALogs : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • displayRTSLogs : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • excludeByRule : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • excludeForTracing : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • excludeLog4jSlf4jImpl : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • excludeLog4jToSlf4j : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • excludes : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • executeBeforeClassInMeasurement : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • executeParallel : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • executeRCA : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • failOnRtsError : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • generateCoverageSelection : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • includeByRule : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • includes : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • iterations : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • kiekerQueueSize : long (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • kiekerWaitTime : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • measureJMH : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • measurementMode (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Values: LEVELWISE, COMPLETE, UNTIL_STRUCTURE_CHANGE, UNTIL_SOURCE_CHANGE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • nightlyBuild : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • onlyMeasureWorkload : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • onlyOneCallRecording : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • pl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • properties : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • redirectSubprocessOutputToFile : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • redirectToNull : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • removeSnapshots : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • repetitions : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • showStart : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • significanceLevel : double (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • statisticalTest (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Values: T_TEST, BIMODAL_T_TEST, AGNOSTIC_T_TEST, MANN_WHITNEY_TEST, CONFIDENCE_INTERVAL, ANY, ANY_NO_AGNOSTIC
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • testClazzFolders : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • testExecutor : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • testGoal : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • testTransformer : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : long (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • traceSizeInMb : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • updateSnapshotDependencies : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useAggregation : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useAlternativeBuildfile : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useGC : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useSourceInstrumentation : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • versionDiff : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • warmup : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • writeAsZip : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • redmineMetricsReport
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • settings (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • apiKey : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify Redmine API Key which can be found in Redmine's [My Account] -> API access key

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If can't find "API access key", Redmine admin needs to enable a setting. "Administration > Settings > Authentication > Enable REST web service".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • projectName : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify Redmine Project's Identifier which you want to generate report for, use Identifier not Name in the Redmine project setting page.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • customQueryId : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sprintSize : int

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify the time span(day). e.g.: if you want to generate report on a weekly basis you should specify 7.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'MicroDocsChecker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • microDocsReportFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • microDocsProjectName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • microDocsGroupName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • microDocsEnvironments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • microDocsSourceFolder : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • microDocsFailBuild : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • microDocsPublish : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • microDocsNotifyPullRequest : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • minio
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • bucket : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The bucket to upload the files to. This bucket will be created if it does not yet exist. Please note the restrictions in bucket naming
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          File pattern to indicate which files will be uploaded. Multiple entries can be used when separated by a ","
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Credentials to use when authenticating to Minio. If host is left blank the global configured credentials will be used
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • excludes : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • host : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          URL where Minio is reachable by Jenkins. Leave this blank to use global configuration
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • targetFolder : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If you want to store the artifacts in a specific folder in Minio you can specify it with this parameter. Environment variables can be used with the ${...} syntax.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • minioDelete
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • bucket : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The bucket to download the files from. An error will be thrown if this bucket does not exist.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • files : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Indicates what files should be deleted in Minio. Environment variables can be used with the ${...} syntax. Multiple files can be separated using ",".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Credentials to use when authenticating to Minio. If host is left blank the global configured credentials will be used
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • failOnNonExisting : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          By default the plugin will not error out if it tries to delete a file that doesn't exist.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • host : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          URL where Minio is reachable by Jenkins. Leave this blank to use global configuration
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • minioDownload
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • bucket : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The bucket to download the files from. An error will be thrown if this bucket does not exist.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Indicates what file should be downloaded. Environment variables can be used with the ${...} syntax.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Credentials to use when authenticating to Minio. If host is left blank the global configured credentials will be used
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • excludes : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • failOnNonExisting : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Uncheck this if you want the build to continue when a non-existing file is encountered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • host : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          URL where Minio is reachable by Jenkins. Leave this blank to use global configuration
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • targetFolder : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Optionally indicate what directory in your workspace the objects should be downloaded to. Environment variables can be used with the ${...} syntax.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'MobileStudioTestBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Jenkins plugin for execution of Progress Mobile Studio tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • mobileStudioRunnerPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Full path to Mobile Studio Runner executable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • testPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The full path to the .mttest test or .mtlist (test list) to run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • msgServer : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • deviceId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • projectRoot : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The path to the project root folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • testAsUnit : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If checked MobileStudio test will be converted to JUnit test, else test will be converted to testsuite and test steps will be converted to JUnit test.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'MockLoadBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Generates load on the Jenkins build node and over the remoting channel. There will be a random number of build artifacts created matching the file name pattern mock-artifact-*.txt. There will be a JUnit test report with the file name mock-junit.xml. Approximately 5% of the time, the build will "fail" its tests and thus no artifacts will be generated.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • averageDuration : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The average duration that the build should take. The actual duration of each step will be randomly selected where with an expected standard deviation equal to the square root of the expected average duration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ModelBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • pushGuardSettings
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • minBufferSize : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • hubUrls : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Optional parameter. Multiple hub urls, comma separated. Eg: https://turbo.net, https://stage.turbo.net
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          When multiple hubs are specified, the streaming model will be pushed to all hubs.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'MonitorRemoteJobBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • hostName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • jobName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeBefore : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          It is determined as working last build if it is carried out within the set time.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          if set "1h", last build is after one ours ago from now, it regard task as working normal. Berow charactor is usable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          1. d for date.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          2. h for hour.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          3. m for minute.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          4. s for second.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • userName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • password : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useSSL : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'MonkeyBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • filename : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • packageId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • eventCount : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • throttleMs : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • seed : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • categories : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • extraParameters : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • moveComponents
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • nexusInstanceId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • destination : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The repository to which components will be moved
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • search (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Type: java.util.Map<java.lang.String, java.lang.String>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tagName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Components associated with this tag will be moved to the selected destination repository
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • msbuild
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • msBuildName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • msBuildFile : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Give the .proj or .sln file from the module root (SCM root directory or workspace directory) that MSBuild will use to build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          You can use build variables through the syntax ${var}.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • cmdLineArgs : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          This is a whitespace separated-list of command-line arguments you can specify. These can be the same as if you were to run MSBuild from the command line.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • buildVariablesAsProperties : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If set to true, Jenkins build variables will be passed to MSBuild as /p:name=value pairs.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Beware : Sensitive build variables such as passwords will not be added.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • continueOnBuildFailure : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If set to true, Job will continue despite MSBuild build failure.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • unstableIfWarnings : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If set to true and warnings on compilation, the build will be unstable.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • doNotUseChcpCommand : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'MsBuildSQRunnerBegin'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • additionalArguments : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • msBuildScannerInstallationName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • projectKey : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • projectName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • projectVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sonarInstallationName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'MsBuildSQRunnerEnd'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'MsTestBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • msTestName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • testFiles : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify the path to your MSTest compiled assemblies.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            You can specify multiple test assemblies by separating them with new-line.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            You can use either relative path to the workspace or full path. Spaces in the path are allowed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            You can use Ant-style filters. i.e - foo/*, foo/**/bar.dll, foo/*.dll

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Command Line Argument: /testcontainer

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • categories : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Optional field, if you do not enter all test will run. If entered specify the test categories to run. You can use logical operators like:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Cateogry Filter Result
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Priority1 Any test with category Priority1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Priority1&SpeedTest Test that have both Priority1 and SpeedTest categories
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Priority1|SpeedTest Tests that have either Priority1 or SpeedTest categories
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Priority1&!SpeedTest Test that have Priority1 category and also do not have SpeedTest category.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Command Line Argument: /category

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • resultFile : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify name of the result file to create. The result file will be delete before each run and will be created relative to the workspace directory.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Command Line Argument: /resultsfile

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • cmdLineArgs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • continueOnFail : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify if the build should fail if a test fail (unchecked) or continue even if a test failed (checked).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • failIfNoTests : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify if the build should fail if no test files are found.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'MultiJobBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • phaseName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • phaseJobs
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • jobName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • jobAlias : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • jobProperties : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • currParams : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configs
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'BooleanParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • configs
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This passes Boolean parameters to the downstream jobs
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • value : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'CurrentBuildParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'FileBuildParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • propertiesFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Comma separated list of absolute or relative paths to file(s) that contains the parameters for the new project. Relative paths are originated from the workspace. The file should have KEY=value pairs, one per line (Java properties file format). Backslashes are used for escaping, so use "\\" for a single backslash.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Current build parameters and/or environment variables can be used in form: ${PARAM} or $PARAM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • encoding : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Specify the encoding of contents of the files. If not specified, default encoding of the platform is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • failTriggerOnMissing : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    When enabled blocks the triggering of the downstream jobs if any of the files are not found in the workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • useMatrixChild : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Use files in workspaces of child builds (that is, builds for each axes combination). This works only when used in publishers of multi-configuration projects. Ignored when used in builders.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • combinationFilter : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Write groovy expression to filter child builds whose files to use. If not specified, uses all children. See Combination Filter of Configuration Matrix for details of groovy expression.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • onlyExactRuns : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Use child builds that is triggered exactly by the parent build. This affects the behavior when you triggered only some of combinations using plugins, you removed some values from axes, and so on.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • textParamValueOnNewLine : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    When enabled properties containing newline character(s) are propagated as TextParameterValue which is a specialized StringParameterValue commonly used for handling multi-line strings in Jenkins. When disabled (default) all properties are propagated as StringParameterValue.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    TextParameterValue and StringParameterValue are typically rendered differently by Jenkins and plugins such as the Rebuild plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'GeneratorCurrentParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'GitRevisionBuildParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This "parameter" passes the SHA1 commit ID that was built by this project into the specified job, and thereby causes the specified job to check out the exact same commit. This is useful to chain multiple activities in a sequence that acts on the same commit in different ways.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • combineQueuedCommits : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This checkbox cause the all revisions to be be ignored apart from the last one if a build is already in the queue.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Does not combine entries with builds of manually started downstream job that are queued. (Ones that do no have a git hash attached to them)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Warning: There is no consideration for multiple branches, or any other behaviour, it is your responsibility to make sure that the hashes provided come from the same branch.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'MatrixSubsetBuildParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • filter : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specifies the Groovy filter expression that restricts the subset of the combinations that the downstream project will run.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      See the "Combination Filter" field in a matrix project configuration page for more details about the environment the script runs in, examples, and so on.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      What you specify here gets expanded by variables of the triggering build, which allows you to dynamically control the subset of the triggered job. For example, if you trigger job BAR from FOO with label=="${TARGET}" in the filter, and if FOO defines the TARGET variable and FOO #1 sets TARGET to be linux, then the triggered BAR #3 will only select the subset of combinations where label=="linux" holds true.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Note that the variable expansion follows the ${varname} syntax used throughout in Jenkins, which collides with Groovy string inline expression syntax. However, Jenkins variable expansion leaves undefined variables as-is, so most of the time your Groovy string line expression syntax will survive the expansion, get passed to Groovy as-is, and work as expected. If you do need to escape '$', use '$$'.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'NodeLabelBuildParameter'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This parameter type defines where the target job should be executed, the value must match either a label or a node name - otherwise the job will just stay in the queue. The NodeLabel parameter passed to the target job, does not have to exist on the target job (but if the target has one defined, it should match the name). This way it is possible to trigger jobs on different nodes then they are actually configured.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • nodeLabel : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The node can be static or a token to be expanded by the token macro plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'NodeParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'PredefinedBuildParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • properties : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        KEY=value pairs, one per line (Java properties file format). Backslashes are used for escaping, so use "\\" for a single backslash.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Current build parameters and/or environment variables can be used in form: ${PARAM} or $PARAM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • textParamValueOnNewLine : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        When enabled properties containing newline character(s) are propagated as TextParameterValue which is a specialized StringParameterValue commonly used for handling multi-line strings in Jenkins. When disabled (default) all properties are propagated as StringParameterValue.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        TextParameterValue and StringParameterValue are typically rendered differently by Jenkins and plugins such as the Rebuild plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'PredefinedGeneratorParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • properties : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        KEY=value pairs, one per line (Java properties file format). Backslashes are used for escaping, so use "\\" for a single backslash.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Current build parameters and/or environment variables can be used in form: ${PARAM} or $PARAM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'SubversionRevisionBuildParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This parameter passes the Subversion revisions that were used in this build to the downstream builds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • includeUpstreamParameters : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This option passes through the subversion parameters that were passed into this build from upstream builds, so that they can be used on downstream projects.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • killPhaseOnJobResultCondition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Values: FAILURE, NEVER, UNSTABLE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • disableJob : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • enableRetryStrategy : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • parsingRulesPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • maxRetries : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • enableCondition : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • abortAllJob : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • buildOnlyIfSCMChanges : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • applyConditionOnlyIfNoSCMChanges : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • aggregatedTestResults : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • continuationCondition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Values: ALWAYS, SUCCESSFUL, COMPLETED, UNSTABLE, FAILURE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • executionType
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Values: PARALLEL, SEQUENTIALLY
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • quietPeriodGroovy : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • mavenForesight
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • projectId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Thundra Foresight Test Project Id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • thundraAgentVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'MystBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • mystAction : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  MyST action to be execute.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • config : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • mystWorkspace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • properties : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • mystInstallationName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • NCScanBuilder
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ncScanType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ncWebsiteId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ncProfileId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ncDoNotFail : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ncApiToken : Object (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ncConfirmed : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ncIgnoreFalsePositive : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ncIgnoreRiskAccepted : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ncServerURL : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ncSeverity : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ncStopScan : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NISConnection'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • viewUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The tabpanel displays the names of the tasks which are analyzed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • address : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Host name (of target server)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • port : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Port (of target server)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • prozent : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Percentage of tasks, which should be accomplished
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • npm
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • workspaceSubdirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • apiKey
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • validateDnsUrlConnection : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • apiUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The Base URL of the NowSecure API, by default this is https://lab-api.nowsecure.com. For Enterprise installs, this URL will differ.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • group : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify group-id where the app belongs
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • binaryName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify the filename of Android or iOS application, only apk and ipa formats are supported respectively. You can specify filename if it was generated by a previous step and is stored under the artifacts directory or the full path of the file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • description : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify description of this step
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • waitForResults : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Check this option if you would like to wait until security analysis is completed. This step would fail if any critical errors are found.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • waitMinutes : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify, in minutes, how long this step should wait for results. If analysis takes longer than this limit, the step would timeout.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • breakBuildOnScore : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Break the build when the application's security score is lower then the defined threshold.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scoreThreshold : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify a number between 1 and 100, 1 being the lower and 100 being the highest, to act as a threshold for breaking builds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • apiKey : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The API Key is used to authenticate against the NowSecure Auto API. See https://docs.nowsecure.com/auto/integration-services/jenkins-integration/ for instructions on generating an API Key.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • useBuildEndpoint : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • artifactsDir : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • debug : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • password : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • proxyEnabled : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • showStatusMessages : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify if status messages for automation testing should be displayed
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • stopTestsForStatusMessage : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • username : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • validateDnsUrlConnectionEnabled : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Check this option if you would like to validate DNS and URL access for NowSecure API
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NSiqBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • srcDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • fileFilter : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NantBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • nantBuildFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • nantName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • targets : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • properties : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NeoBuildAction'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                This build step executes a NeoLoad scenario and adds trend result graphs to the job page.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • executable : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This is the absolute path to the NeoLoad executable file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example,/opt/NeoLoad 6.5/bin/NeoLoadCmd, C:\Program Files\NeoLoad 6.5\bin\NeoLoadCmd.exe or /Applications/NeoLoad 6.5/bin/NeoLoadCmd.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • projectType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • reportType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • localProjectFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This is the local project file path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example,/home/ajohnson/neoload_projects/JenkinsExample/JenkinsExample.nlp, C:\neoload_projects\JenkinsExample\JenkinsExample.nlp or /Users/ajohnson/neoload_projects/JenkinsExample/JenkinsExample.nlp or C:\neoload_projects\JenkinsExample\JenkinsExample.yaml.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • sharedProjectName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This is the name of the shared project to checkout and load.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example, MyProjectName.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scenarioName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The name of the Scenario to launch.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • htmlReport : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This is the path where the HTLM report file is created by NeoLoad.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example, ${WORKSPACE}/neoload-report/report.html.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • xmlReport : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This is the path where the XML report file is created.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example, ${WORKSPACE}/neoload-report/report.xml.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • pdfReport : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This is the path where the PDF report file is created.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example, ${WORKSPACE}/neoload-report/report.pdf.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • junitReport : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This is the path where the JUnit results file (based on an SLA in NeoLoad) is created.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example, ${WORKSPACE}/neoload-report/junit-sla-results.xml.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scanAllBuilds : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • displayTheGUI : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  When selected, then the NeoLoad GUI is displayed during the test. Note that the user launching the process must be able to display a user interface (which is not always the case for the Jenkins user). Note also that some errors or warning messages may prevent NeoLoad from closing automatically at the end of a test run. Thus this should only be used for testing purposes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testResultName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This is the name of the test results. The value $Date{hh:mm - dd MMM yyyy} is replaced by the current date by NeoLoad and the value ${BUILD_NUMBER} is replaced by the current build number by Jenkins.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example, $Date{hh:mm - dd MMM yyyy} (build $${BUILD_NUMBER}).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testDescription : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The test description entered here appears in the report file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • licenseType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • licenseVUCount : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This is the number of Virtual Users (User Paths) to reserve with the license.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • licenseVUSAPCount : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This is the number of SAP Virtual Users (User Paths for SAP) to reserve with the license.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • licenseDuration : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This is the number of hours to reserve the license. This must be at least as long as the test will last.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • customCommandLineOptions : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Include any additional Command Line options here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • publishTestResults : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  When selected, test results are published after the scenario is run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • sharedProjectServer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Choose which server to use. If no servers appear, please configure one in the System Configuration screen of Jenkins.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • uniqueID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • loginUser : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • loginPassword
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • licenseServer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Choose which server to use to lease the license. If no servers appear, please configure one in the System Configuration screen of Jenkins.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • uniqueID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • loginUser : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • loginPassword
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • collabPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • licenseID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • showTrendAverageResponse : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  When selected, a trend graph of the average response time for all pages is displayed. Note that the build artifacts must include XML results from NeoLoad for the graph to be displayed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • showTrendErrorRate : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  When selected, a trend graph of the error rate of the most recent runs is included on the job page. Note that the build artifacts must include XML results from NeoLoad for the graph to be displayed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • graphOptionsInfo
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • curve
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • path : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • statistic : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • maxTrends : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Limit the number of points in trend charts. You can use 0 value to have unlimited charts
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NerrvanaPlugin'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • settingsXmlString : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • loglevel : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Workspace folder help file
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NetStormBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                This build step can be used to invoke Netstorm tasks
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • URLConnectionString : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • username : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • password : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • project : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • subProject : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scenario : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testMode : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • baselineType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • pollInterval : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • protocol : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • repoIp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • repoPort : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • repoPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • repoUsername : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • repoPassword : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • profile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • script : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • page : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • advanceSett : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • urlHeader : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • hiddenBox : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • gitPull : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • generateReport : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • doNotWaitForTestCompletion : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • totalusers : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • rampUpSec : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • rampupmin : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • rampuphour : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • duration : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • serverhost : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • sla : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • rampupDuration : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • emailid : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • emailidCC : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • emailidBcc : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testsuite : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • dataDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • checkRuleFileUpload : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • neuvector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • repository : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Enter the name of the repository to scan.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • registrySelection : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Select a registry by its nickname from the drop down menu, or select Local. Registries can be added in the global settings.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • nameOfVulnerabilityToExemptFour : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • nameOfVulnerabilityToExemptOne : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • nameOfVulnerabilityToExemptThree : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • nameOfVulnerabilityToExemptTwo : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • nameOfVulnerabilityToFailFour : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • nameOfVulnerabilityToFailOne : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • nameOfVulnerabilityToFailThree : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • nameOfVulnerabilityToFailTwo : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • numberOfHighSeverityToFail : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Minimum number of high vulnerabilities to fail the build. Leave blank or zero if not applicable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • numberOfMediumSeverityToFail : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Minimum number of medium vulnerabilities to fail the build. Leave blank or zero if not applicable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scanLayers : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Check to scan the image layers, and get the number of vulnerabilities for each layer.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scanTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The timeout value in minutes for the local image scan. The default is 10 minutes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • standaloneScanner : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tag : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Enter the image tag. The default tag is ‘latest’.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NexusArtifactUploader'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • nexusVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • protocol : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • nexusUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If Nexus Url is http://mynexusrepo:8081/nexus the value for this field is mynexusrepo:8081/nexus
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • groupId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • version : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • repository : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  RepositoryId of the Repository in Nexus to which this artifact to be uploaded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • artifacts
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • artifactId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • type : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Extension of the artifact for ex: artifact file name is artifact.zip the extension is zip.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • classifier : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Classifier of the artifact.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    File path in the workspace. ex:artifact.zip or artifact.jar
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NexusPublisherBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • nexusInstanceId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • nexusRepositoryId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The publisher currently supports hosted release Maven 2 repositories. This list is limited to repositories which meet this requirement.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • packages
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'MavenPackage'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • mavenCoordinate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • groupId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • artifactId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • version : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • packaging : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • mavenAssetList
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • classifier : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • extension : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tagName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Tag is only available for Nexus Repository Manager 3+
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • nirmata
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For projects that use Nirmata as part of the build system. This causes Jenkins to invoke Nirmata Service with the given actions, following fields and options. Jenkins will mark the build as a failure if any issue is encountered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • builder
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Select the required action from the drop-down

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Delete App in Environment
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Deletes the specified application from the specified environment.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Deploy App in Environment
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Deploys the specified application from catalog to specified application.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Update App in Catalog
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Updates the specified application in specified catalog.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Update App in Environment
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Updates the specified application in specified environment.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • deleteAppInEnvironment
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • endpoint : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • apikey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • environment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • application : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • deployAppInEnvironment
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • endpoint : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • apikey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • environment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • application : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • catalog : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • directories : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • includescheck : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • excludescheck : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • deployType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • updateAppInCatalog
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • endpoint : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • apikey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • catalog : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • directories : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • includescheck : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • excludescheck : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • updateAppInEnvironment
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • endpoint : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • apikey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • environment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • application : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • directories : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • includescheck : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • excludescheck : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • nodejsci
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • nodeJSInstallationName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • cacheLocationStrategy (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • default
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • executor
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workspace
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • configId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'NopmdCheckPublisher'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • filesetList
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • pattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Patterns of files that must be included. You can use wildcards like Apache Ant fileset. "*" is used to match zero or more characters, "**" is used to match zero or more directories.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • excludePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Patterns of files that must be excluded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'NotifyEventsBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • title : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • message : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • priority : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • level : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • attachBuildLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • attachment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'NouvolaBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • planID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        You can find your plan ID by signing into https://divecloud.nouvola.com and going to Tests -> Test Plans. The ID can be found in the table next to the plan you wish to run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiKey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Your Nouvola API Key can be found in https://divecloud.nouvola.com by clicking on ACCOUNT and selecting the "API & Keys" tab.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credsPass : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If you setup your Nouvola DiveCloud test with credentials, you will need to enter the encryption key you saved with those credentials.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • waitTime : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If you are not using a return URL, the plugin will poll the DiveCloud API for results. You may enter a time in minutes for the job to wait before commencing polling based on the expected time taken by the test plan to complete.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • returnURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nouvola Divecloud plugin uses Nouvola's webhook service. In order to get a callback from the webhook service once the tests are completed, you will need to give a web url that the webhook service can send its payload to. If you do not have one, the Jenkins job will exit once a test plan is successfully triggered without waiting for a callback.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • listenTimeOut : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If you are using a return URL for Nouvola Divecloud's webhook service to return results, enter a period in minutes for which the listener should wait for a callback from the service. This value should be the approximate length of the test plan. This can be gauged based on your experience with the tests. If this value is not given a default value of 30 minutes will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'NucleiBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OOBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For projects that use Operations Orchestration as an automation system. This causes Jenkins to invoke flows from a selected server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ooServer : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • basepath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The path to the directory that contains the flow that you want to run. The path can be found in Operation Orchestration Central under Content Management\Flow Library
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Default path: /Library
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        E.g.:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Library/Tutorials/subflows/
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Library/Templates
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • selectedFlow : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • args
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • retVariableToCheck : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • comparisonOrdinal : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • valueToCompareWith : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • desiredResultType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • stepExecutionTimeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This input configures the step execution timeout of the plugin to xxx ms. The plugin will wait for this amount of time, then it will finish the Jenkins job and it will automatically put the build in the fail/unstable state.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • runName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ostorlabScan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • waitForResults : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • riskThreshold
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Values: HIGH, MEDIUM, LOW, POTENTIALLY, HARDENING
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • filePath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • title : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • scanProfile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • platform : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • waitMinutes : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • breakBuildOnScore : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentials (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • scoreThreshold (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Values: HIGH, MEDIUM, LOW, POTENTIALLY, HARDENING
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • waitingForResults : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Oak9Builder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • orgId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • maxSeverity : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • baseUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OctoperfBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Select the Octoperf credentials to use.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workspaceId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Select the Octoperf Workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Select the Octoperf Project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • scenarioId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        OctoPerf's plugin for Jenkins allows users to automate load tests from the Cloud.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Just choose the scenario you want to run. Let Jenkins start and stop the test and document the results.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        After the run, a test report will be generated directly into Jenkins and your OctoPerf account.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If the test list is empty, you must insert your unique OctoPerf Username and password into the Jenkins settings, or create a test in your OctoPerf account.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • stopConditions (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Type: ? extends org.jenkinsci.plugins.octoperf.conditions.TestStopCondition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • octopusPack
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • toolId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The Octopus Deploy Command Line executable
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • packageId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The ID of the package; e.g. MyCompany.MyApp
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • packageFormat : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        ZIP is the recommended format.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sourcePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The root folder containing files and folders to pack. Defaults to the working directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • additionalArgs : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Additional arguments to be passed to the Octo executable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • includePaths : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Newline-separated files to include in the package. Defaults to **
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • outputPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The folder into which the generated package file will be written. Defaults to the working directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • overwriteExisting : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Overwrite any existing package
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • packageVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The version number of the package. Defaults to a timestamp-based version.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verboseLogging : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Enable debug logging
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • octopusPushBuildInformation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • serverId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The identifier of the Octopus Server instance which you want to use for deploying this release.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Server Id is set in the global OctopusDeploy Plugin configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • spaceId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If left empty the Default space for the Octopus Server instance will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Otherwise, specify a space by name. The space specified must exist in the Octopus Server instance.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • toolId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The Octopus Deploy Command Line executable
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • packageId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Newline-separated package IDs; e.g.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        MyCompany.MyApp
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        MyCompany.MyApp2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • packageVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The version number of the package. Defaults to a timestamp-based version.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • commentParser : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Octopus can associate the work items or issues addressed by the changes in the package to the package. Select the issue tracking system that you use, or leave this option blank if you do not use a supported issue tracker.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • overwriteMode
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Normally, if the same build information already exists on the server, the server will reject the build information push. This practice ensures build information isn't accidentally overwritten or ignored. Enable this setting to override allow build information to be overwritten.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Values: FailIfExists, OverwriteExisting, IgnoreIfExists
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • additionalArgs : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Additional arguments to be passed to the Octo executable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • gitBranch : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • gitCommit : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • gitUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verboseLogging : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • octopusPushPackage
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • serverId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The identifier of the Octopus Server instance which you want to use for deploying this release.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Server Id is set in the global OctopusDeploy Plugin configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • toolId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The Octopus Deploy Command Line executable
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • packagePaths : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Newline-separated paths of package files that will be pushed. Ant-style wildcards like dir/**/*.zip are supported.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • overwriteMode
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Normally, if the same package already exists on the server, the server will reject the package push. This practice ensures a package isn't accidentally overwritten or ignored. Use this setting to override this behavior.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Values: FailIfExists, OverwriteExisting, IgnoreIfExists
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • additionalArgs : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Additional arguments to be passed to the Octo executable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • spaceId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If left empty the Default space for the Octopus Server instance will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Otherwise, specify a space by name. The space specified must exist in the Octopus Server instance.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verboseLogging : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Enable debug logging
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • OneSky
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Try to look for this on the URL after selecting the project from the menu
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • resourcesPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OntrackDSLStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ignoreFailure : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If set, a failure in contacting Ontrack won't make the step fail.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OpenShiftBuildVerifier'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • bldCfg : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If you run `oc get bc` for the project listed in "nameSpace", that is the value you want to put here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • namespace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • authToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verbose : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • checkForTriggeredDeployments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This flag is the toggle for turning on or off the verification that any deployments triggered by this build's output fired.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • waitTime : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • waitUnit : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OpenShiftBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • bldCfg : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If you run `oc get bc` for the project listed in "nameSpace", that is the value you want to put here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • namespace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • env
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify a list of environment variables to include in the build (see `oc start-build -e ...`).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The name of the environment variable to set.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The value for the environment variable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • authToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verbose : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • commitID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The value here is what you supply with the --commit option when invoking the OpenShift `oc start-build` command. It allows you to point the OpenShift build to a specific commit hash from the git-log of the source repository. If you do not supply a value, the plugin assumes the latest version from the source repository should be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The value here is what you supply with the --from-build option when invoking the OpenShift `oc start-build` command. It allows you to point to OpenShift build to a previously run build, and run another build with exactly the same source and destination metadata. If you do not supply a value, the plugin will generate a new OpenShift build based on the Build Configuration referenced.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • showBuildLogs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Indicates whether the build logs get dumped to the console of the Jenkins build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • checkForTriggeredDeployments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This flag is the toggle for turning on or off the verification that any deployments triggered by this build's output fired.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • waitTime : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • waitUnit : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OpenShiftCreator'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • namespace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • authToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verbose : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • jsonyaml : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The JSON or YAML formatted text that conforms to the schema for defining the various OpenShift resources.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OpenShiftDeleterJsonYaml'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • namespace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • authToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verbose : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • jsonyaml : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The JSON or YAML formatted text that conforms to the schema for defining the various OpenShift resources.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OpenShiftDeleterLabels'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • namespace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • authToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verbose : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • types : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The comma separated list of types of API objects to delete, where those objects have labels corresponding to the specified key/value pairs. See https://docs.openshift.org/latest/rest_api/index.html for the supported types.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • keys : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The comma separated list of keys of the labels in the API objects to delete.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • values : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The comma separated list of values of the labels in the API objects to delete.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OpenShiftDeleterList'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • namespace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • authToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verbose : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • types : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The comma separated list of types of API objects to delete. See https://docs.openshift.org/latest/rest_api/index.html for the supported types.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • keys : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The comma separated list of keys of the API objects to delete.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OpenShiftDeployer'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • depCfg : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If you run `oc get dc` for the project listed in "nameSpace", that is the value you want to put here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • namespace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • authToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verbose : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • waitTime : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • waitUnit : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OpenShiftDeploymentVerifier'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • depCfg : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If you run `oc get dc` for the project listed in "nameSpace", that is the value you want to put here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • namespace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • replicaCount : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This optional field's value represents the number expected running pods for the deployment for the DeploymentConfig specified. If no value is specified it will work the number of running pods against the desired replica count in the DeploymentConfig.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • authToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verbose : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verifyReplicaCount : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This flag is the toggle for turning on or off the verification that the specified replica count for the deployment has been reached.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • waitTime : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • waitUnit : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OpenShiftExec'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • namespace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • authToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verbose : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • pod : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The pod in which to execute a command.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • container : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The container in which to execute a command. If not specified, the first container in the pod will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The name of the command to execute.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • arguments
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify a list of arguments to pass to the command.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The value for the environment variable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • waitTime : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • waitUnit : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OpenShiftImageTagger'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testTag : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The name of the existing tag, or an actual, existing image ID. The image referenced will have the new tag applied to it.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • prodTag : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        One or more tag names in a comma delimited list. If multiple streams and multiple destination tags are specified, the two lists must contain the same number of elements.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • namespace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • authToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verbose : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testStream : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The name of the ImageStream for the existing tag.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • prodStream : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        One or more ImageStream names in a comma delimited list. If multiple streams and multiple destination tags are specified, the two lists must contain the same number of elements.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • destinationNamespace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The value here should match the value from the output from `oc project` if you created the resources related to this task from the command line. If nothing is specified, the plugin will inspect the PROJECT_NAME environment variable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • destinationAuthToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The value here is what you supply with the --token option when invoking the OpenShift `oc` command. If you do not supply a value, the plugin will assume it is running in the OpenShift Jenkins image and attempt to load the kubernetes service account token stored in that image.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • alias : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This flag is the equivalent of the `--alias` option for the `oc tag` command. When false, the destination tag type is "ImageStreamImage", and when true, the destination tag type is "ImageStreamTag".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OpenShiftScaler'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • depCfg : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If you run `oc get dc` for the project listed in "nameSpace", that is the value you want to put here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • namespace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • replicaCount : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The value here should be the number of started pods desired for the deployment specified. It is the equivalent of the value supplied to --replicas with an `oc scale` command invocation. This is a required parameter. If an integer is not specified here, this build step can not be added to the job. Note: specifying a 0 is allowed, and means you do not want any pods for the specified deployment config running.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • authToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verbose : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verifyReplicaCount : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This flag is the toggle for turning on or off the verification that the specified replica count for the deployment has been reached.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • waitTime : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • waitUnit : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OpenShiftServiceVerifier'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • svcName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The equivalent to the name supplied to a `oc get service` command line invocation.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • namespace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • authToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verbose : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OrchestratorBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • serverUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        vRealize Orchestrator Server URL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • userName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        User name
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • password : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Password
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tenant : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Tenant to which the user belongs to
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workflowName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Orchestrator workflow name
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • waitExec : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Execute and Wait for the workflow to be complete
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • inputParams
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Input parameters for the workflow. Select the parameter from the drop down for which you wish to provide input.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • type : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cfyOutputsToInputs

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This step maps outputs and capabilities, of an environment created by Cloudify, into inputs of another deployment.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This step takes two inputs:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • A JSON file in the format generated by the "Build Cloudify Environment" ("outputs file"). For more information, refer to the tooltip of the "Outputs File" parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • A JSON file (or string) containing the mapping.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The format of the mapping JSON is as follows:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          "outputs": {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          	"<output_name>": "<input_name>",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          	"<output_name>": "<input_name>",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          	...
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          },
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          "capabilities": {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          	"<capability_name>": "<input_name>",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          	"<capability_name>": "<input_name>",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          	...
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      At the end, a file will be generated, containing a JSON compatible with Cloudify's standard "Deployment Inputs" structure, namely:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	"<input_name>": "<intput_value>",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	"<input_name>": "<intput_value>",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	...
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For example, if the "outputs file" is as follows:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	"outputs": {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      		"endpoint": "10.0.0.130",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      		"username": "centos"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	},
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	"capabilities": {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      		"public_key": "/tmp/public_key"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      And the mapping is as follows:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	"outputs": {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      		"username": "app_username"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	},
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	"capabilities": {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      		"public_key": "app_data"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Then the resultant inputs file will be as follows:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	"app_username": "centos",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	"app_data": "/tmp/public_key"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      	
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • inputsLocation : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Path to the inputs file to be created.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • mapping : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        A JSON containing mapping between outputs/capabilities and inputs. For information about the structure, refer to the tooltip of this build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • mappingLocation : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        A JSON containing mapping between outputs/capabilities and inputs. For information about the structure, refer to the tooltip of this build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • outputsLocation : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Location of the outputs JSON file, containing outputs and capabilities of another deployment. The file must be in the following format:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "outputs": {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	"<output_name>": "<output_value>",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	"<output_name>": "<output_value>",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	...
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            },
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "capabilities": {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	"<capability_name>": "<capability_value>",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	"<capability_name>": "<capability_value>",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	...
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        	
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tenant : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Cloudify tenant to operate on. If left empty, then the default tenant (defined in the plugin's configuration page) will be used.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • oversecuredUpload
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • integrationId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • branchName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • appPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • dotnetPack
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The dotnet pack command builds the project and creates NuGet packages. The result of this command is a NuGet package (that is, a .nupkg file).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • charset : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The character set to use for the step's output. If not specified, the charset associated with the build will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • configuration : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Defines the build configuration. The default for most projects is Debug, but you can override the build configuration settings in your project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • continueOnError : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If this is checked, errors encountered will cause the build status to be set to FAILURE (or UNSTABLE, if configured that way), but the build will be allowed to continue. Otherwise, any such errors will cause the build to be terminated immediately.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • force : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Forces all dependencies to be resolved even if the last restore was successful. Specifying this flag is the same as deleting the project.assets.json file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • includeSource : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Includes the debug symbols NuGet packages in addition to the regular NuGet packages in the output directory. The sources files are included in the src folder within the symbols package.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • includeSymbols : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Includes the debug symbols NuGet packages in addition to the regular NuGet packages in the output directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • noBuild : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Doesn't build the project before packing, and does not perform an implicit restore.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • noDependencies : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Ignores project-to-project references and only restores the root project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • noRestore : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Doesn't execute an implicit restore when running the command.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • nologo : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Doesn't display the startup banner or the copyright message.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Available since: .NET Core SDK 3.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • option : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • options : Array / List of String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • optionsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For more information about these options, see the MSBuild Command-Line Reference.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If targets and/or properties are also configured, those will be passed after these options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • outputDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Places the built packages in the directory specified.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • project : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The project or solution to pack. It's either a path to a csproj file, vbproj file, fsproj file, a solution file, or to a directory. If not specified, the command searches the current directory for a project or solution file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • properties (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Type: java.util.Map<java.lang.String, java.lang.String>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • propertiesString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Additional MSBuild properties to set. These should be specified one per line, in Java properties syntax.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • runtime : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specifies the target runtime to restore packages for. For a list of Runtime Identifiers (RIDs), see the RID catalog.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sdk : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Name of a .NET SDK to use so that dotnet will be in the path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If the default is specified, you either need to use the With .NET element (or a withDotNet block in a pipeline script) to specify one, or ensure this step runs on a node that has a .NET SDK installed and in the path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • showSdkInfo : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If enabled, dotnet --info will be executed before the main command. This shows a list of available SDKs and runtimes, indicating which one is currently being used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • shutDownBuildServers : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If enabled, dotnet build-server shutdown will be executed after the main command, shutting down build servers that may have been started.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Note: If this is not specified, a build that causes such a build server to be started may hang until those server processes end. As such, it's recommended to specify this for the last .NET-related step in a job. If using multiple SDKs, each needs its own shutdown (e.g. the .NET Core 3.1 SDK will not shut down build servers from the .NET 5.0 SDK).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Available since: .NET Core SDK 2.1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • specificSdkVersion : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Depending on the platform, the dotnet executable may use the most recent SDK available on the system, even when PATH is set up to find an older SDK deployment first; see this page for more information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          By enabling this option, the configured SDK home directory will be checked, and if it only includes a single SDK deployment, a global.json file will be created in the current directory, referencing that SDK version and disabling roll-forward.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Note: This will silently overwrite any global.json already present in the current directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • unstableIfErrors : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If this is set and the build completes with errors, the build will be marked as unstable instead of failed, and execution will continue to the next step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • unstableIfWarnings : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If this is set and the build completes with warnings (but no errors), the build will be marked as unstable instead of successful.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • verbosity : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Sets the MSBuild verbosity level.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • versionSuffix : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Defines the value for the $(VersionSuffix) MSBuild property in the project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • workDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The directory in which to execute the command. By default, this is the current directory (for freestyle jobs, that is the root of the job's workspace).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • uTesterPageCountTask
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • initialUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The initial URL to check.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • urlsWhiteList : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          A list of URLs (one per line) to whitelist.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • pageCount : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The Page Count.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rulesList
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          A list of JSON rules to evaluate.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • rule : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • complianceMinimum : float
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The minimum compliance level needed to pass (if multiple data results exist this will check each).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • allowSimultaneousLogins : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • loginFlowJson : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useRunner : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • fetchResponseTimeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The number of seconds to wait for a response from the User1st API before failing (default of 120).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ParallelTestExecutor'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Given another job that runs tests, executes multiple runs of it concurrently by interleaving tests, achieving the parallel test execution semantics.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This builder can be used with any test job that (1) produce JUnit-compatible XML files, and (2) accept a test-exclusion list in a file. This builder looks at the test execution time from the last time, and divide tests into multiple units of roughly equal size. Each unit is then converted into the exclusion list (by excluding all but the tests that assigned to that unit), and the test job is triggered for each unit, with the exclusion file placed inside the workspace at your specified location.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Optionally, if your test job supports it, you may provide a test-inclusion file name. If defined, the plugin will generate inclusion lists for all parallel units but one which will still use exclusion list. This avoids new test cases from being included in all units on their first run. If you don't use an inclusion file, when a new test is added, the first build afterward will be executed in all the sub-builds, because it's not in the exclusion list on any of the units.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        You are responsible for configuring the build script in the test job to honor the exclusion and inclusion file. A standard technique is to write the build script to always refer to a fixed exclusion list file, and check in an empty file by that name to your SCM. You can then specify that file as the "exclusion file name" in the configuration of this builder, and the builder will overwrite the empty file from SCM by the generated one.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Similarly, you are responsible for checking "Execute concurrent builds if necessary" on the test job to allow the concurrent execution.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        At the end of the executions of the test job, the specified report directories are brought back into this job's workspace, then the standard JUnit test report collector will tally them.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • parallelism
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • count
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Always divide the tests into N parallel sub-tasks of about equal size. This mode is useful if your build slaves are not elastic to control the resource consumption by this task.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • size : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • time
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Divide the tests into parallel sub-tasks each no bigger than N minutes. Combined with elastic slaves, such as EC2, the turn-around time of the tests will remain the same no matter how many tests you add.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This value counts just the time spent on executing tests, and not including other time such as checking out the code, building the test, etc. For example, if your test job spends 50 minutes in tests and 60 minutes total from start to finish, then you have 10 minutes "fixed" overhead regardless of the number of tests it executes. If you use this mode and set the value to "10 minutes", then you'll have 5 parallel sub-tasks that all ends in roughly 20 minutes (20 mins = 10 mins tests time + 10 mins overhead.)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "N minutes per a sub-task" is a goal, not a hard constraint. So a sub-task can take longer (for example if you have a single test that takes more than N minutes.)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • mins : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • testJob : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specify the name of the test job that executes the actual tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • patternFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          A text file that lists one Java source file name per line gets created by this path inside the workspace of the test job. The path is relative to the workspace of the test job. Your test job must honor this exclusion list while executing tests. See the help of this builder for more details.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • testReportFiles : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The GLOB syntax that specifies test reports and its associated files that need to be copied back into this build to tally the test reports. This includes the JUnit-compatible XML files, as well as files that capture stdout/stderr of those tests (if they are placed separately.)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The path is relative to the workspace of the test job. For Maven builds, this value is normally "**/target/surefire-reports/".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • archiveTestResults : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If you uncheck this you need to configure your own JUnit archiver in the Publisher section. The test reports are copied to "test-splits/reports/".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • parameters
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          You can specify additional parameters given to the test job.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'BooleanParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configs
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This passes Boolean parameters to the downstream jobs
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • value : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CurrentBuildParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'FileBuildParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • propertiesFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Comma separated list of absolute or relative paths to file(s) that contains the parameters for the new project. Relative paths are originated from the workspace. The file should have KEY=value pairs, one per line (Java properties file format). Backslashes are used for escaping, so use "\\" for a single backslash.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Current build parameters and/or environment variables can be used in form: ${PARAM} or $PARAM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • encoding : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Specify the encoding of contents of the files. If not specified, default encoding of the platform is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • failTriggerOnMissing : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                When enabled blocks the triggering of the downstream jobs if any of the files are not found in the workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • useMatrixChild : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Use files in workspaces of child builds (that is, builds for each axes combination). This works only when used in publishers of multi-configuration projects. Ignored when used in builders.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • combinationFilter : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Write groovy expression to filter child builds whose files to use. If not specified, uses all children. See Combination Filter of Configuration Matrix for details of groovy expression.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • onlyExactRuns : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Use child builds that is triggered exactly by the parent build. This affects the behavior when you triggered only some of combinations using plugins, you removed some values from axes, and so on.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • textParamValueOnNewLine : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                When enabled properties containing newline character(s) are propagated as TextParameterValue which is a specialized StringParameterValue commonly used for handling multi-line strings in Jenkins. When disabled (default) all properties are propagated as StringParameterValue.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                TextParameterValue and StringParameterValue are typically rendered differently by Jenkins and plugins such as the Rebuild plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'GeneratorCurrentParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'GitRevisionBuildParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                This "parameter" passes the SHA1 commit ID that was built by this project into the specified job, and thereby causes the specified job to check out the exact same commit. This is useful to chain multiple activities in a sequence that acts on the same commit in different ways.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • combineQueuedCommits : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This checkbox cause the all revisions to be be ignored apart from the last one if a build is already in the queue.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Does not combine entries with builds of manually started downstream job that are queued. (Ones that do no have a git hash attached to them)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Warning: There is no consideration for multiple branches, or any other behaviour, it is your responsibility to make sure that the hashes provided come from the same branch.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'MatrixSubsetBuildParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • filter : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specifies the Groovy filter expression that restricts the subset of the combinations that the downstream project will run.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  See the "Combination Filter" field in a matrix project configuration page for more details about the environment the script runs in, examples, and so on.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  What you specify here gets expanded by variables of the triggering build, which allows you to dynamically control the subset of the triggered job. For example, if you trigger job BAR from FOO with label=="${TARGET}" in the filter, and if FOO defines the TARGET variable and FOO #1 sets TARGET to be linux, then the triggered BAR #3 will only select the subset of combinations where label=="linux" holds true.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Note that the variable expansion follows the ${varname} syntax used throughout in Jenkins, which collides with Groovy string inline expression syntax. However, Jenkins variable expansion leaves undefined variables as-is, so most of the time your Groovy string line expression syntax will survive the expansion, get passed to Groovy as-is, and work as expected. If you do need to escape '$', use '$$'.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NodeLabelBuildParameter'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This parameter type defines where the target job should be executed, the value must match either a label or a node name - otherwise the job will just stay in the queue. The NodeLabel parameter passed to the target job, does not have to exist on the target job (but if the target has one defined, it should match the name). This way it is possible to trigger jobs on different nodes then they are actually configured.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • nodeLabel : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The node can be static or a token to be expanded by the token macro plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NodeParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'PredefinedBuildParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • properties : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    KEY=value pairs, one per line (Java properties file format). Backslashes are used for escaping, so use "\\" for a single backslash.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Current build parameters and/or environment variables can be used in form: ${PARAM} or $PARAM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • textParamValueOnNewLine : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    When enabled properties containing newline character(s) are propagated as TextParameterValue which is a specialized StringParameterValue commonly used for handling multi-line strings in Jenkins. When disabled (default) all properties are propagated as StringParameterValue.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    TextParameterValue and StringParameterValue are typically rendered differently by Jenkins and plugins such as the Rebuild plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'PredefinedGeneratorParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • properties : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    KEY=value pairs, one per line (Java properties file format). Backslashes are used for escaping, so use "\\" for a single backslash.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Current build parameters and/or environment variables can be used in form: ${PARAM} or $PARAM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'SubversionRevisionBuildParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This parameter passes the Subversion revisions that were used in this build to the downstream builds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • includeUpstreamParameters : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This option passes through the subversion parameters that were passed into this build from upstream builds, so that they can be used on downstream projects.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • estimateTestsFromFiles : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The first run (or a run without any reference to test result from previous runs) will estimate tests according the content of workspace and maven java project patterns for tests. The Tests will be splitted according to this estimation.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • includesPatternFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                A text file that lists one Java source file name per line gets created by this path inside the workspace of the test job. The path is relative to the workspace of the test job. Your test job must honor this inclusion list while executing tests. See the help of this builder for more details.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'ParameterPoolBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Multiple projects can be specified to check for values. The parameter name should be the same in each project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                If this is left blank, the current project that this build step is in is used. Variables can be used to specify the project names.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Name for the parameter. This name will be exposed as an environmental variable. This allows subsequent build steps to use the value.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • values : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Values for the parameter pool. Separate values by comma.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For ranges of values use [start..end]
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                E.g. for say vm1, vm2, vm3, vm4 do vm[1..4]
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                This can be combined with regular parameters.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                testVm, vm[1..4]
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                will result in a pool of values of testVm, vm1, vm2, vm3, vm4
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Descending order e.g. vm[4..1] is supported as well. The order of the values is also taken into account when selecting from two valid values
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • preferError : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Check if you want the job to prefer parameter values from failed builds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                This can be useful for circumstances where there is a long running build that would refresh an environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Failed builds are termed any build that was not successful or unstable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                This plugin takes the view that unstable builds still were for the most part functional.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'PartialReleaseMgrSuccessfulBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • pcBuild
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • serverAndPort : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • pcServerName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Hostname or IP address The LoadRunner Enterprise Hostname or IP address. If the port of the LRE server is different than the default one, mention it by adding a collon (:) and then the port number
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: mypcserver.mycompany.net or 182.138.255.1 or mypcserver.mycompany.net:81

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If the LRE server requires to be accessed via a tenant, you can specify it by adding the tenant details to the LRE Server field.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: mypcserver.mycompany.net/?tenant=fa128c06-5436-413d-9cfa-9f04bb738df3 or 182.138.255.1/?tenant=fa128c06-5436-413d-9cfa-9f04bb738df3 or mypcserver.mycompany.net:81/?tenant=fa128c06-5436-413d-9cfa-9f04bb738df3

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Important: Do not use the full URL of LoadRunner Enterprise server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example, using https://mypcserver/LoadTest will fail. Instead, just specify 'mypcserver' value in 'LRE Server' field and switch on the 'Use HTTPS Protocol' if secured protocol is required.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  LoadRunner Enterprise User / Token's Credentials or parameter pointing to such credentials.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almDomain : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almProject : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testInstanceId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Represents an instance of a performance test within an ALM Test Set. In order to find the test instance id go to: LRE Web UI > Testing > Select the relevant test > Test Details tab > Assigned Test Set drop down list > Edit the Test Set and look for the Test Instance ID column
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • autoTestInstanceID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeslotDurationHours : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeslotDurationMinutes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • postRunAction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Values: COLLATE, COLLATE_AND_ANALYZE, DO_NOTHING
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • vudsMode : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  A Virtual User Day (VUD) license provides you with a specified number of Vusers (VUDs) that you can run an unlimited number of times within a 24 hour period. Before using this option, make sure that VUDs licenses are applied in your Micro Focus LoadRunner Enterprise environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • statusBySLA : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Check this option in order to set the build-step status according to a pre-defined SLA (Service Level Agreement) configured within your performance test. Unless checked, the build-step will be labeled as Passed as long as no failures occurred.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • description : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • addRunToTrendReport : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • trendReportId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • HTTPSProtocol : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • proxyOutURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Add your local proxy as following: http(s)://host:port
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  or Leave empty if not using a local proxy. The following proxy configurations are not supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • PAC (proxy auto-config).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Automatic configuration script.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsProxyId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • retry : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • retryDelay : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • retryOccurrences : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • authenticateWithToken : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  From LRE 2021 R1, you can use a token associated with your user for authentication.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If LRE is defined to use SSO, this will be the only way for this plugin to authenticate to LRE.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  To use it, have a token issued to your user in LRE.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  In Jenkins, create new Jenkins credentials based on the LRE token you received: use the ClientIdKey in the Username and the ClientSecretKey key in the password.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Then use the new Jenkins credentials with this checkbox switched on.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • pcGitBuild
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The plugin allows to synchronize scripts from Git repository to Micro Focus LoadRunner Enterprise project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The plugin respects the subfolders structure defined in Git when synchronizing LoadRunner scripts to Performance Center 12.60 and above. For previous versions, all scripts will be uploaded to the same root folder in the Test Plan tree of the LoadRunner Enterprise project (scripts with duplicated named will be overwritten).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • description : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • pcServerName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Hostname or IP address The LoadRunner Enterprise Hostname or IP address. If the port of the LRE server is different than the default one, mention it by adding a collon (:) and then the port number
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: mypcserver.mycompany.net or 182.138.255.1 or mypcserver.mycompany.net:81

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If the LRE server requires to be accessed via a tenant, you can specify it by adding the tenant details to the LRE Server field.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: mypcserver.mycompany.net/?tenant=fa128c06-5436-413d-9cfa-9f04bb738df3 or 182.138.255.1/?tenant=fa128c06-5436-413d-9cfa-9f04bb738df3 or mypcserver.mycompany.net:81/?tenant=fa128c06-5436-413d-9cfa-9f04bb738df3

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Important: Do not use the full URL of LoadRunner Enterprise server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example, using https://mypcserver/LoadTest will fail. Instead, just specify 'mypcserver' value in 'LRE Server' field and switch on the 'Use HTTPS Protocol' if secured protocol is required.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • httpsProtocol : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  LoadRunner Enterprise User / Token's Credentials or parameter pointing to such credentials.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almDomain : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almProject : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • serverAndPort : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • proxyOutURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Add your local proxy as following:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  http(s)://host:port
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  or Leave empty if not using a local proxy.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The following proxy configurations are not supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • PAC (proxy auto-config).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Automatic configuration script.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsProxyId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • subjectTestPlan : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The Test Plan folder path in LoadRunner Enterprise where the scripts will be loaded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Available paths can be found in the LoadRunner Enterprise interface: Test Management -> Test Plan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The path must begin with "Subject" and be separated with backslashes (\).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The path is case-sensitive!
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Important: For Performance Center Server below version 12.60:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • the specified folder must exist at the time of the build (the plugin can not create folders independently).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Scripts saved in Git subfolders will be synchronized to the specified subject and in case of duplicated script names in Git, the last uploaded script to LRE will overwrite the previously uploaded script(s) with the same name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • uploadScriptMode
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This corresponds to the similar option existing in LoadRunner Enterprise / VuGen:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • All Files: All script files are uploaded (this takes longer to load).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Runtime Files: Only the required files are uploaded (script files, Runtime Settings, parameter files, etc.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Recommended value: "Runtime Files".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Values: RUNTIME_FILES, ALL_FILES
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • removeScriptFromPC
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This option will allow you to synchronize scripts deletion from Git to LoadRunner Enterprise.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The recommended value is " Yes".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Values: YES, NO
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • importTests

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  How to import tests from YAML files saved in the Git repository

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Copy your YAML files to a folder in your Git repository (YAML files under the root of the Git repository will be ignored). The plugin will create the test in the LoadRunner Enterprise project according to:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • The file name (without extension) which will be used as test name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • The location of the file in the Git repository which will be the location of the test under the root folder ('Subject') in the Test Management tree.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • The content of the YAML file which must be composed according to the parameters described in the tables below.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Note:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • All parameters must be in lowercase.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • When a backslash (\) occurs in a value provided to a parameter (for example, a folder separator in a file path), a double backslash (\\) must be used instead.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • This feature is supported with Performance Center 12.61 and later versions.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Root parameters of the YAML file:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  controller
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Defines the Controller to be used during the test run (it must be an available host in the LoadRunner Enterprise project). If not specified, a Controller will be chosen from the different controllers available in the LoadRunner Enterprise project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  From Performance Center 12.62 and plugin version 1.1.1, the option to provision a Controller as a Docker image is available by specifying the value "Elastic" and providing a value for the 'controller_elastic_configuration' parameter (see 'controller_elastic_configuration' table below).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  lg_amount Number of load generators to allocate to the test (every group in the test will be run by the same load generators). Not required if each group defined in the 'group' parameter defines the load generators it will be using via the 'lg_name' parameter (see 'group' table below).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  group Lists all groups or scripts defined in the test. The parameter to be used in each group are specified in the 'group' table below. Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  scheduler Defines the duration of a test, and determines whether virtual users are started simultaneously or gradually. See the 'scheduler' table below. No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  lg_elastic_configuration Defines the image to be used in order to provision load generators. See the 'lg_elastic_configuration' table below. Available from Performance Center 12.62 and plugin version 1.1.1. Yes, if a load generator is defined to be provisioned from a Docker image.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  controller_elastic_configuration Defines the image to be used in order to provision the Controller. See the 'controller_elastic_configuration' table below. Available from Performance Center 12.62 and plugin version 1.1.1. Yes, if the Controller is defined to be provisioned from a Docker image.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  group:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  group_name Name of the group (it must be a unique name if several groups are defined). Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  vusers Number of virtual users to allocate to the group for running the script. Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  script_id ID of the script in the LoadRunner Enterprise project. Not required if the 'script_path' parameter is specified.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  script_path Path and name of the script to be added to the group, separated by double backslashes (\\). For example "MyMainFolder\\MySubFolder\\MyScriptName'. Do not include the LoadRunner Enterprise root folder (named "Subject"). Not required if 'script_id' parameter is specified
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  lg_name List of load generators to allocate to the group for running the script. The supported values are:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • The hostname, as defined in LoadRunner Enterprise, of an existing load generator in LoadRunner Enterprise allocated as a host.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "LG" followed by a number, to use an automatically matched load generator (recommended).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "DOCKER" followed by a number, to use a dynamic load generator (available from Performance Center 12.62, if your project is set to work with Docker). This option requires the 'lg_elastic_configuration' parameter to be defined (see the 'lg_elastic_configuration' table below).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  command_line The command line applied to the group. No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  rts Object defining the runtime settings of the script. See the 'rts' table below. No

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  rts:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  pacing Can be used to define the number of iterations the script will run and the required delay between iterations (see the 'pacing' table below). No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  thinktime Can be used to define think time (see the 'thinktime' table below). No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  java_vm Can be used when defining Java environment runtime settings (see the 'java_vm' table below). No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  jmeter Can be used to define JMeter environment runtime settings (see the 'jmeter' table below). No

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  pacing:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  number_of_iterations Specifies the number of iterations to run; this must be a positive number. Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  type Possible values for type attribute are:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "immediately": ignores 'delay' and 'delay_random_range' parameters. This is the default value when no type is specified.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "fixed delay": 'delay' parameter is mandatory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "random delay": 'delay' and 'delay_random_range' parameters are mandatory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "fixed interval": 'delay' parameter is mandatory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "random interval": 'delay' and 'delay_random_range' parameters are mandatory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  delay Non-negative number (less than 'delay_at_range_to_seconds' when specified). Depends on the value provided for the 'type' parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  delay_random_range Non-negative number. It will be added to the value given to the 'delay' parameter (the value will be randomly chosen between the value given to 'delay' parameter and the same value to which is added the value of this parameter). Depends on the value provided for the 'type' parameter.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  thinktime:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  type The ThinkTime Type attribute is one of:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "ignore": This is the default value when no type is specified.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "replay": Provide 'limit_seconds' parameter with value.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "modify": Provide 'limit_seconds' and 'multiply_factor' parameters with values.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "random": Provide 'limit_seconds', 'min_percentage' and 'max_percentage' parameters with values.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  min_percentage This must be a positive number. Depends on the value provided for the 'type' parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  max_percentage This must be a positive number (it must be larger than the value provided for the 'min_percentage' parameter). Depends on the value provided for the 'type' parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  limit_seconds This must be a positive number. Depends on the value provided for the 'type' parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  multiply_factor The recorded think time is multiplied by this factor at runtime. Depends on the value provided for the 'type' parameter.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  java_vm:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  jdk_home The JDK installation path. No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  java_vm_parameters List the Java command line parameters. These parameters can be any JVM argument. The common arguments are the debug flag (-verbose) or memory settings (-ms, -mx). In additional, you can also pass properties to Java applications in the form of a -D flag. No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  use_xboot Boolean: Instructs VuGen to add the Classpath before the Xbootclasspath (prepend the string). No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  enable_classloader_per_vuser Boolean: Loads each Virtual User using a dedicated class loader (runs Vusers as threads). No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  java_env_class_paths A list of classpath entries. Use a double backslash (\\) for folder separators. No

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  jmeter:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  start_measurements Boolean value to enable JMX measurements during performance test execution. No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  jmeter_home_path Path to JMeter home. If not defined, the path from the %JMETER_HOME% environment variable is used. No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  jmeter_min_port This number must be lower than the value provided in the 'jmeter_max_port' parameter. Both 'jmeter_min_port' and 'jmeter_max_port' parameters must be specified otherwise the default port values is used. No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  jmeter_max_port This number must be higher than the value provided in the 'jmeter_min_port' parameter. Both 'jmeter_min_port' and 'jmeter_max_port' parameters must be specified otherwise the default port values is used. No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  jmeter_additional_properties JMeter additional properties file. Use double slash (\\) for folder separator. No

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  scheduler:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  rampup Time, in seconds, to gradually start all virtual users. Additional virtual users are added every 15 seconds until the time specified in the parameter ends. If no value is specified, all virtual users are started simultaneously at the beginning of the test. No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  duration Time, in seconds, that it will take to run the test after all virtual users are started. After this time, the test run ends. If not specified, the test will run until completion. No

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  lg_elastic_configuration: (available from Performance Center 12.62 and plugin version 1.1.1)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  image_id This number can be retrieved from:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • The Administration page of LoadRunner Enterprise (you might need to turn to your LoadRunner Enterprise administrator as accessing this page requires admin privileges): select the Orchestration section -> switch to Docker Images tab -> you will have the list of all available Docker images for Load Generator purposes with their ID. You can make sure the images are available to your project from the Orchestrators tab.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • A LoadRunner Enterprise Rest API command applied on the project (replace the bracketed values): GET - http(s)://(PCServer):(PortNumber)/LoadTest/rest/domains/(DomainName)/projects/(ProjectName)/dockerimages/ and select any valid image not having the value 'controller' for purpose.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Yes if one of the load generator is defined to be provisioned from Docker image.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  memory_limit This parameter can be retrieved from LoadRunner Enterprise Application -> Test Management -> edit a test -> Press Assign LG button -> in the Elastic section, select DOCKER1 -> select the relevant image (based on the image name) -> use the values provided in the 'Memory(GB)' dropdown list (if not specified, this parameter should be ignored). Yes, if the image is defined with resource limits
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  cpu_limit This parameter can be retrieved from LoadRunner Enterprise Application -> Test Management -> edit a test -> Press Assign LG button -> in the Elastic section, select DOCKER1 -> select the relevant image (based on the image name) -> use the values provided in the 'CUPs' dropdown list (if not specified, this parameter should be ignored). Yes, if the image is defined with resource limits

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  controller_elastic_configuration: (available from Performance Center 12.62 and plugin version 1.1.1)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  image_id This number can be retrieved from:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • The Administration page of LoadRunner Enterprise (you might need to turn to your LoadRunner Enterprise administrator as accessing this page requires admin privileges): select the Orchestration section -> switch to Docker Images tab -> you will have the list of all available Docker images for Controller purposes with their ID. You can make sure the images are available to your project from the Orchestrators tab.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • A LoadRunner Enterprise Rest API command applied on the project (replace the bracketed values): GET - http(s)://(PCServer):(PortNumber)/LoadTest/rest/domains/(DomainName)/projects/(ProjectName)/dockerimages/ and select any valid image having the value 'controller' for purpose.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Yes if the Controller is defined to be provisioned from Docker image.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  memory_limit This parameter can be retrieved from LoadRunner Enterprise Application -> Test Management -> edit a test -> select the Controller -> choose Elastic option -> select the relevant image -> Under the Resource Limits label, find and use the values provided in the 'Memory(GB)' dropdown list (if not specified, this parameter should be ignored). Yes, if the image is defined with resource limits
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  cpu_limit This parameter can be retrieved from LoadRunner Enterprise Application -> Test Management -> edit a test -> select the Controller -> choose Elastic option -> select the relevant image -> Under the Resource Limits label, find and use the values provided in the 'CUPs' dropdown list (if not specified, this parameter should be ignored). Yes, if the image is defined with resource limits

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  In the example below:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • The plugin automatically assigns the file name as the test name, and the folder path of the file in the Git repository is used to create the location of the test under the root folder ('Subject') in the LoadRunner Enterprise project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • In the content:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Since no Controller and no load generator amount were specified, a random available Controller will be allocated to the test just before it is run and the 'lg_name' parameter specified in each group will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • In the 'group' parameter:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • We added two scripts. For each, we provided a unique value in the 'group_name' parameter, and the number of virtual users to run the group.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Since we did not know the ID of the scripts, we used the 'script_path' parameter in which we entered the script path (without "Subject") followed by the script name, and used double backslashes for separators.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • We specified the load generators that will be used by each group (in this case, load generators will automatically be matched as we use the 'LG' prefix).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • In the scheduler:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • We want all Virtual Users to be initialized gradually (45 seconds).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • We want the test to stop after 5 minutes (300 seconds).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ##################################################
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  group:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  - group_name: "TEstInt"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    vusers: '20'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    script_path: "plugin\\TEstInt"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    lg_name:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - "LG1"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - "LG2"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  - group_name: "Mtours"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    vusers: '20'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    script_path: "plugin\\mtours"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    lg_name:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - "LG3"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - "LG4"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  scheduler:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    rampup: '45'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Duration: '300'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ##################################################
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  In the example below:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • The plugin automatically assigns the file name as the test name, and the folder path of the file in the Git repository is used to create the location of the test under the root folder ('Subject') in the LoadRunner Enterprise project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Since the 'controller' and the 'lg_amount' parameters are specified, the specified Controller will be used to run the test and three automatch load generators will be used and shared by all groups.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • The content of the file is defined with seven groups, all being set with the “rts” parameter:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • The “pacing” parameter is used with different options for all groups.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • The “java_vm” parameter is used for five scripts with JavaVM for protocol.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • The “thinktime” parameter is used with different options for four groups.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • The “jmeter” parameter is used for two scripts with JMeter for protocol.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • In the scheduler:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • We want all Virtual Users to be initialized gradually (120 seconds).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • We want the test to stop after 10 minutes (600 seconds).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ##################################################
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  controller: "mycontroller"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  lg_amount: 3
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  group:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - group_name: "JavaVuser_LR_Information_pacing_immediately_thinktime_ignore"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      vusers: 50
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      script_id: 394
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      rts:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        pacing:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          number_of_iterations: 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "immediately"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        java_vm:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          jdk_home: "C:\\Program Files\\Java\\jdk1.8.0_191"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          java_vm_parameters: "java_vm_parameters"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          enable_classloader_per_vuser: true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          use_xboot: true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          java_env_class_paths:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            - "java_env_class_path1"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            - "java_env_class_path2"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        thinktime:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "ignore"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - group_name: "JavaHTTP_BigXML_pacing_fixed_delay_thinktime_replay"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      vusers: 50
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      script_path: "scripts\\java_protocols\\JavaHTTP_BigXML"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      rts:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        pacing:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          number_of_iterations: 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "fixed delay"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay: 10
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        java_vm:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          jdk_home: "C:\\Program Files\\Java\\jdk1.8.0_191"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          java_vm_parameters: "java_vm_parameters"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          enable_classloader_per_vuser: true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        thinktime:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "replay"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          limit_seconds: 30
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - group_name: "JavaVuser_LR_Information_immediately_pacing_random_delay_thinktime_modify"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      vusers: 50
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      script_id: 394
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      rts:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        pacing:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          number_of_iterations: 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "random delay"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay: 10
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay_random_range: 20
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        java_vm:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          jdk_home: "C:\\Program Files\\Java\\jdk1.8.0_191"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          java_vm_parameters: "java_vm_parameters"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          enable_classloader_per_vuser: true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          java_env_class_paths:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            - "java_env_class_path1"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            - "java_env_class_path2"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        thinktime:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "modify"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          limit_seconds: 30
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          multiply_factor: 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - group_name: "JavaHTTP_BigXML_pacing_fixed_interval_thinktime_random"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      vusers: 50
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      #script_id: 392
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      script_path: "scripts\\java_protocols\\JavaHTTP_BigXML"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      rts:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        pacing:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          number_of_iterations: 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "fixed interval"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay: 10
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        java_vm:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          jdk_home: "C:\\Program Files\\Java\\jdk1.8.0_191"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          java_vm_parameters: "java_vm_parameters"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          enable_classloader_per_vuser: true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          java_env_class_paths:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            - "java_env_class_path1"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            - "java_env_class_path2"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        thinktime:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "random"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          limit_seconds: 30
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          min_percentage: 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          max_percentage: 3
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - group_name: "JavaHTTP_BigXML_pacing_random_interval"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      vusers: 50
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      script_path: "scripts\\java_protocols\\JavaHTTP_BigXML"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      rts:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        pacing:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          number_of_iterations: 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "random interval"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay: 10
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay_random_range: 20
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        java_vm:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          jdk_home: "C:\\Program Files\\Java\\jdk1.8.0_191"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          java_vm_parameters: "java_vm_parameters"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          enable_classloader_per_vuser: true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          java_env_class_paths:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            - "java_env_class_path1"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            - "java_env_class_path2"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - group_name: "Mtours_pacing_random_interval"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      vusers: 50
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      script_path: "scripts\\Mtours"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      rts:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        pacing:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          number_of_iterations: 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "random interval"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay: 10
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay_random_range: 20
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        jmeter:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          start_measurements: true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          jmeter_home_path: "c:\\jmeter"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          jmeter_min_port: 2001
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          jmeter_max_port: 3001
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          jmeter_additional_properties: "jmeter_additional_properties"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - group_name: "Mtours_pacing_random_interval_Jmeter_default_port"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      vusers: 50
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      script_path: "scripts\\Mtours"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      rts:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        pacing:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          number_of_iterations: 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "random interval"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay: 10
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay_random_range: 20
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        jmeter:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          start_measurements: true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  scheduler:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    rampup: 120
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    duration: 600
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ##################################################
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Values: YES, NO
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • authenticateWithToken : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  From LRE 2021 R1, you can use a token associated with your user for authentication.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If LRE is defined to use SSO, this will be the only way for this plugin to authenticate to LRE.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  To use it, have a token issued to your user in LRE.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  In Jenkins, create new Jenkins credentials based on the LRE token you received: use the ClientIdKey in the Username and the ClientSecretKey key in the password.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Then use the new Jenkins credentials with this checkbox switched on.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • pcRunBuild
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • serverAndPort : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • pcServerName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Hostname or IP address The LoadRunner Enterprise Hostname or IP address. If the port of the LRE server is different than the default one, mention it by adding a collon (:) and then the port number
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: mypcserver.mycompany.net or 182.138.255.1 or mypcserver.mycompany.net:81

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If the LRE server requires to be accessed via a tenant, you can specify it by adding the tenant details to the LRE Server field.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Example: mypcserver.mycompany.net/?tenant=fa128c06-5436-413d-9cfa-9f04bb738df3 or 182.138.255.1/?tenant=fa128c06-5436-413d-9cfa-9f04bb738df3 or mypcserver.mycompany.net:81/?tenant=fa128c06-5436-413d-9cfa-9f04bb738df3

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Important: Do not use the full URL of LoadRunner Enterprise server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example, using https://mypcserver/LoadTest will fail. Instead, just specify 'mypcserver' value in 'LRE Server' field and switch on the 'Use HTTPS Protocol' if secured protocol is required.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  LoadRunner Enterprise User / Token's Credentials or parameter pointing to such credentials.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almDomain : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almProject : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testToRun : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testContentToCreate : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  How to create a test from YAML input

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The content of the field must either be:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Text in YAML syntax composed according to the parameters described in the tables below. You must set values to the 'test_name' and 'test_folder_path' parameters and continue with the'test_content' parameter and its sub-parameters.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • As opposed to the previous option, you can also specify as value a relative path to a YAML file within the workspace (or within your Git repository cloned within the workspace). In the YAML file, only specify the parameters defined in the 'test_content' table. The following logic will be used to create the LoadRunner Enterprise test:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • The file name (without extension) will be used as the test name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • The location of the file in the Git repository will be the location of the test under the root folder ('Subject') in the Test Management tree.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • The content of the YAML file must consist of the parameters, and their sub-parameters, listed in the 'test_content' table below.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Note:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • All parameters must be in lowercase.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • When a backslash (\) occurs in a value provided to a parameter (for example, a folder separator in a file path), a double backslash (\\) must be used instead.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • This feature is supported with Performance Center 12.61 and later versions.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Root parameters of the field
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  test_name The test name. Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  test_folder_path The location of the test in the Test Management folder tree of the LoadRunner Enterprise project. The folders should be separated by double backslashes (\\). For example, "MyMainFolder\\MySubfolder\\MySubSubFolder". Do not include the LoadRunner Enterprise root folder (named "Subject") Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  test_content The content of the test that requires additional parameters specified in the 'test_content' table below. Yes

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  test_content (if a YAML file is specified in the field, those are the root parameter to be used in the file content):
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  controller
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Defines the Controller to be used during the test run (it must be an available host in the LoadRunner Enterprise project). If not specified, a Controller will be chosen from the different controllers available in the LoadRunner Enterprise project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  From Performance Center 12.62 and plugin version 1.1.1, the option to provision a Controller as a Docker image is available by specifying the value "Elastic" and providing a value for the 'controller_elastic_configuration' parameter (see 'controller_elastic_configuration' table below).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  lg_amount Number of load generators to allocate to the test (every group in the test will be run by the same load generators). Not required if each group defined in the 'group' parameter defines the load generators it will be using via the 'lg_name' parameter (see 'group' table below).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  group Lists all groups or scripts defined in the test. The parameter to be used in each group are specified in the 'group' table below. Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  scheduler Defines the duration of a test, and determines whether virtual users are started simultaneously or gradually. See the 'scheduler' table below. No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  lg_elastic_configuration Defines the image to be used in order to provision load generators. See the 'lg_elastic_configuration' table below. Available from Performance Center 12.62 and plugin version 1.1.1. Yes, if a load generator is defined to be provisioned from a Docker image.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  controller_elastic_configuration Defines the image to be used in order to provision the Controller. See the 'controller_elastic_configuration' table below. Available from Performance Center 12.62 and plugin version 1.1.1. Yes, if the Controller is defined to be provisioned from a Docker image.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  group:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  group_name Name of the group (it must be a unique name if several groups are defined). Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  vusers Number of virtual users to allocate to the group for running the script. Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  script_id ID of the script in the LoadRunner Enterprise project. Not required if the 'script_path' parameter is specified.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  script_path Path and name of the script to be added to the group, separated by double backslashes (\\). For example "MyMainFolder\\MySubFolder\\MyScriptName'. Do not include the LoadRunner Enterprise root folder (named "Subject"). Not required if 'script_id' parameter is specified
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  lg_name List of load generators to allocate to the group for running the script. The supported values are:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • The hostname, as defined in LoadRunner Enterprise, of an existing load generator in LoadRunner Enterprise allocated as a host.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "LG" followed by a number, to use an automatically matched load generator (recommended).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "DOCKER" followed by a number, to use a dynamic load generator. Available from Performance Center 12.62, if your project is set to work with Docker. This option requires the 'lg_elastic_configuration' parameter to be defined (see the 'lg_elastic_configuration' table below).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  command_line The command line applied to the group. No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  rts Object defining the runtime settings of the script. See the 'rts' table below. No

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  rts:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  pacing Can be used to define the number of iterations the script will run and the required delay between iterations (see the 'pacing' table below). No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  thinktime Can be used to define think time (see the 'thinktime' table below). No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  java_vm Can be used when defining Java environment runtime settings (see the 'java_vm' table below). No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  jmeter Can be used to define JMeter environment runtime settings (see the 'jmeter' table below). No

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  pacing:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  number_of_iterations Specifies the number of iterations to run; this must be a positive number. Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  type Possible values for type attribute are:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "immediately": ignores 'delay' and 'delay_random_range' parameters. This is the default value when no type is specified.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "fixed delay": 'delay' parameter is mandatory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "random delay": 'delay' and 'delay_random_range' parameters are mandatory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "fixed interval": 'delay' parameter is mandatory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "random interval": 'delay' and 'delay_random_range' parameters are mandatory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  delay Non-negative number (less than 'delay_at_range_to_seconds' when specified). Depends on the value provided for the 'type' parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  delay_random_range Non-negative number. It will be added to the value given to the 'delay' parameter (the value will be randomly chosen between the value given to 'delay' parameter and the same value to which is added the value of this parameter). Depends on the value provided for the 'type' parameter.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  thinktime:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  type The ThinkTime Type attribute is one of:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "ignore": This is the default value when no type is specified.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "replay": Provide 'limit_seconds' parameter with value.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "modify": Provide 'limit_seconds' and 'multiply_factor' parameters with values.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • "random": Provide 'limit_seconds', 'min_percentage' and 'max_percentage' parameters with values.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  min_percentage This must be a positive number. Depends on the value provided for the 'type' parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  max_percentage This must be a positive number (it must be larger than the value provided for the 'min_percentage' parameter). Depends on the value provided for the 'type' parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  limit_seconds This must be a positive number. Depends on the value provided for the 'type' parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  multiply_factor The recorded think time is multiplied by this factor at runtime. Depends on the value provided for the 'type' parameter.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  java_vm:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  jdk_home The JDK installation path. No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  java_vm_parameters List the Java command line parameters. These parameters can be any JVM argument. The common arguments are the debug flag (-verbose) or memory settings (-ms, -mx). In additional, you can also pass properties to Java applications in the form of a -D flag. No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  use_xboot Boolean: Instructs VuGen to add the Classpath before the Xbootclasspath (prepend the string). No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  enable_classloader_per_vuser Boolean: Loads each Virtual User using a dedicated class loader (runs Vusers as threads). No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  java_env_class_paths A list of classpath entries. Use a double backslash (\\) for folder separators. No

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  jmeter:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  start_measurements Boolean value to enable JMX measurements during performance test execution. No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  jmeter_home_path Path to JMeter home. If not defined, the path from the %JMETER_HOME% environment variable is used. No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  jmeter_min_port This number must be lower than the value provided in the 'jmeter_max_port' parameter. Both 'jmeter_min_port' and 'jmeter_max_port' parameters must be specified otherwise the default port values is used. No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  jmeter_max_port This number must be higher than the value provided in the 'jmeter_min_port' parameter. Both 'jmeter_min_port' and 'jmeter_max_port' parameters must be specified otherwise the default port values is used. No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  jmeter_additional_properties JMeter additional properties file. Use double slash (\\) for folder separator. No

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  scheduler:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  rampup Time, in seconds, to gradually start all virtual users. Additional virtual users are added every 15 seconds until the time specified in the parameter ends. If no value is specified, all virtual users are started simultaneously at the beginning of the test. No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  duration Time, in seconds, that it will take to run the test after all virtual users are started. After this time, the test run ends. If not specified, the test will run until completion. No

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  lg_elastic_configuration: (available from Performance Center 12.62 and plugin version 1.1.1)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  image_id This number can be retrieved from:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • The Administration page of LoadRunner Enterprise (you might need to turn to your LoadRunner Enterprise administrator as accessing this page requires admin privileges): select the Orchestration section -> switch to Docker Images tab -> you will have the list of all available Docker images for Load Generator purposes with their ID. You can make sure the images are available to your project from the Orchestrators tab.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • A LoadRunner Enterprise Rest API command applied on the project (replace the bracketed values): GET - http(s)://(PCServer):(PortNumber)/LoadTest/rest/domains/(DomainName)/projects/(ProjectName)/dockerimages/ and select any valid image not having the value 'controller' for purpose.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Yes if one of the load generator is defined to be provisioned from Docker image.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  memory_limit This parameter can be retrieved from LoadRunner Enterprise Application -> Test Management -> edit a test -> Press Assign LG button -> in the Elastic section, select DOCKER1 -> select the relevant image (based on the image name) -> use the values provided in the 'Memory(GB)' dropdown list (if not specified, this parameter should be ignored). Yes, if the image is defined with resource limits
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  cpu_limit This parameter can be retrieved from LoadRunner Enterprise Application -> Test Management -> edit a test -> Press Assign LG button -> in the Elastic section, select DOCKER1 -> select the relevant image (based on the image name) -> use the values provided in the 'CUPs' dropdown list (if not specified, this parameter should be ignored). Yes, if the image is defined with resource limits

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  controller_elastic_configuration: (available from Performance Center 12.62 and plugin version 1.1.1)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Parameter Description Required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  image_id This number can be retrieved from:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • The Administration page of LoadRunner Enterprise (you might need to turn to your LoadRunner Enterprise administrator as accessing this page requires admin privileges): select the Orchestration section -> switch to Docker Images tab -> you will have the list of all available Docker images for Controller purposes with their ID. You can make sure the images are available to your project from the Orchestrators tab.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • A LoadRunner Enterprise Rest API command applied on the project (replace the bracketed values): GET - http(s)://(PCServer):(PortNumber)/LoadTest/rest/domains/(DomainName)/projects/(ProjectName)/dockerimages/ and select any valid image having the value 'controller' for purpose.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Yes if the Controller is defined to be provisioned from Docker image.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  memory_limit This parameter can be retrieved from LoadRunner Enterprise Application -> Test Management -> edit a test -> select the Controller -> choose Elastic option -> select the relevant image -> Under the Resource Limits label, find and use the values provided in the 'Memory(GB)' dropdown list (if not specified, this parameter should be ignored). Yes, if the image is defined with resource limits
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  cpu_limit This parameter can be retrieved from LoadRunner Enterprise Application -> Test Management -> edit a test -> select the Controller -> choose Elastic option -> select the relevant image -> Under the Resource Limits label, find and use the values provided in the 'CUPs' dropdown list (if not specified, this parameter should be ignored). Yes, if the image is defined with resource limits

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  In the next example, the value of the field is set with the code below:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • The test name is "mytestname" and it will be placed in the LoadRunner Enterprise project under the folder path "Subject\\Tests\\mytests" (the root folder of the folders, which is "Subject", should not be specified in the parameter). The folder separator is a double backslash (\\).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • In the content:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Since no Controller or load generator amount were specified, a random available Controller will be used to run the test, and the 'lg_name' parameter specified in each group will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • In the 'group' parameter:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • We added two scripts. For each, we provided a unique value in the 'group_name' parameter, and the number of virtual users to run the group.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Since we did not know the ID of the scripts, we used the 'script_path' parameter in which we entered the script path (without "Subject") followed by the script name, and used double backslashes for separators.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • We specified the load generators that will be used by each group (in this case, load generators will automatically be matched as we use the 'LG' prefix).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • In the scheduler:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • We want all Virtual Users to be initialized gradually (45 seconds).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • We want the test to stop after 5 minutes (300 seconds).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ##################################################
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  test_name: mytestname
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  test_folder_path: "Tests\\mytests"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  test_content:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    group:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      - group_name: "TEstInt"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        vusers: '20'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        script_path: "plugin\\TEstInt"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        lg_name:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          - "LG1"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          - "LG2"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      - group_name: "Mtours"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        vusers: '20'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        script_path: "plugin\\mtours"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        lg_name:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          - "LG3"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          - "LG4"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    scheduler:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      rampup: '45'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      duration: '300'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ##################################################
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  In the next example, a YAML file location is specified as value and the content of the file contains the code below:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • The plugin automatically assigns the file name as the test name, and the folder path of the file in the Git repository is used to create the location of the test under the root folder ('Subject') in the LoadRunner Enterprise project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • In the content:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Since no Controller or load generator amount were specified, a random available Controller will be used to run the test, and the 'lg_name' parameter specified in each group will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • In the 'group' parameter:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • We added two scripts. For each, we provided a unique value in the 'group_name' parameter, and the number of virtual users to run the group.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Since we did not know the ID of the scripts, we used the 'script_path' parameter in which we entered the script path (without "Subject") followed by the script name, and used double backslashes for separators.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • We specified the load generators that will be used by each group (in this case, load generators will automatically be matched as we use the 'LG' prefix).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • In the scheduler:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • We want all Virtual Users to be initialized gradually (45 seconds).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • We want the test to stop after 5 minutes (300 seconds).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ##################################################
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  group:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - group_name: "TEstInt"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      vusers: '20'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      script_path: "plugin\\TEstInt"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      lg_name:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        - "LG1"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        - "LG2"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - group_name: "Mtours"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      vusers: '20'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      script_path: "plugin\\mtours"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      lg_name:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        - "LG3"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        - "LG4"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  scheduler:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    rampup: '45'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    duration: '300'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ##################################################
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  In the next example, a YAML file location is specified as value and the content of the file contains the code below:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • The plugin automatically assigns the file name as the test name, and the folder path of the file in the Git repository is used to create the location of the test under the root folder ('Subject') in the LoadRunner Enterprise project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Since the 'controller' parameter and the 'lg_amount' parameter are specified, the specified controller will be used to run the test and three automatch load generators will be used and shared by all groups.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • The content of the file is defined with seven groups, all being set with the “rts” parameter:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • The “pacing” parameter is used with different options for all groups.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • The “java_vm” parameter is used for five scripts with JavaVM for protocol.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • The “thinktime” parameter is used with different options for four groups.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • The “jmeter” parameter is used for two scripts with JMeter for protocol.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • In the scheduler:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • We want all Virtual Users to be initialized gradually (120 seconds).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • We want the test to stop after 10 minutes (600 seconds).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ##################################################
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  controller: "mycontroller"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  lg_amount: 3
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  group:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - group_name: "JavaVuser_LR_Information_pacing_immediately_thinktime_ignore"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      vusers: 50
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      script_id: 394
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      rts:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        pacing:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          number_of_iterations: 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "immediately"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        java_vm:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          jdk_home: "C:\\Program Files\\Java\\jdk1.8.0_191"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          java_vm_parameters: "java_vm_parameters"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          enable_classloader_per_vuser: true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          use_xboot: true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          java_env_class_paths:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            - "java_env_class_path1"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            - "java_env_class_path2"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        thinktime:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "ignore"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - group_name: "JavaHTTP_BigXML_pacing_fixed_delay_thinktime_replay"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      vusers: 50
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      script_path: "scripts\\java_protocols\\JavaHTTP_BigXML"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      rts:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        pacing:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          number_of_iterations: 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "fixed delay"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay: 10
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        java_vm:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          jdk_home: "C:\\Program Files\\Java\\jdk1.8.0_191"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          java_vm_parameters: "java_vm_parameters"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          enable_classloader_per_vuser: true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        thinktime:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "replay"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          limit_seconds: 30
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - group_name: "JavaVuser_LR_Information_immediately_pacing_random_delay_thinktime_modify"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      vusers: 50
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      script_id: 394
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      rts:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        pacing:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          number_of_iterations: 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "random delay"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay: 10
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay_random_range: 20
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        java_vm:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          jdk_home: "C:\\Program Files\\Java\\jdk1.8.0_191"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          java_vm_parameters: "java_vm_parameters"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          enable_classloader_per_vuser: true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          java_env_class_paths:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            - "java_env_class_path1"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            - "java_env_class_path2"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        thinktime:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "modify"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          limit_seconds: 30
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          multiply_factor: 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - group_name: "JavaHTTP_BigXML_pacing_fixed_interval_thinktime_random"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      vusers: 50
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      #script_id: 392
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      script_path: "scripts\\java_protocols\\JavaHTTP_BigXML"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      rts:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        pacing:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          number_of_iterations: 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "fixed interval"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay: 10
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        java_vm:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          jdk_home: "C:\\Program Files\\Java\\jdk1.8.0_191"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          java_vm_parameters: "java_vm_parameters"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          enable_classloader_per_vuser: true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          java_env_class_paths:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            - "java_env_class_path1"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            - "java_env_class_path2"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        thinktime:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "random"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          limit_seconds: 30
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          min_percentage: 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          max_percentage: 3
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - group_name: "JavaHTTP_BigXML_pacing_random_interval"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      vusers: 50
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      script_path: "scripts\\java_protocols\\JavaHTTP_BigXML"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      rts:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        pacing:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          number_of_iterations: 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "random interval"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay: 10
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay_random_range: 20
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        java_vm:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          jdk_home: "C:\\Program Files\\Java\\jdk1.8.0_191"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          java_vm_parameters: "java_vm_parameters"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          enable_classloader_per_vuser: true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          java_env_class_paths:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            - "java_env_class_path1"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            - "java_env_class_path2"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - group_name: "Mtours_pacing_random_interval"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      vusers: 50
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      script_path: "scripts\\Mtours"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      rts:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        pacing:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          number_of_iterations: 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "random interval"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay: 10
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay_random_range: 20
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        jmeter:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          start_measurements: true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          jmeter_home_path: "c:\\jmeter"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          jmeter_min_port: 2001
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          jmeter_max_port: 3001
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          jmeter_additional_properties: "jmeter_additional_properties"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    - group_name: "Mtours_pacing_random_interval_Jmeter_default_port"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      vusers: 50
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      script_path: "scripts\\Mtours"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      rts:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        pacing:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          number_of_iterations: 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          type: "random interval"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay: 10
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          delay_random_range: 20
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        jmeter:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          start_measurements: true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  scheduler:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    rampup: 120
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    duration: 600
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ##################################################
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testInstanceId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Represents an instance of a performance test within an ALM Test Set. In order to find the test instance id go to: LoadRunner Enterprise Application > Test Lab perspective > Performance Test Set table and look for the ID column
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • autoTestInstanceID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeslotDurationHours : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeslotDurationMinutes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • postRunAction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Values: COLLATE, COLLATE_AND_ANALYZE, DO_NOTHING
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • vudsMode : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  A Virtual User Day (VUD) license provides you with a specified number of Vusers (VUDs) that you can run an unlimited number of times within a 24 hour period. Before using this option, make sure that VUDs licenses are applied in your Micro Focus LoadRunner Enterprise environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • statusBySLA : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Check this option in order to set the build-step status according to a pre-defined SLA (Service Level Agreement) configured within your performance test. Unless checked, the build-step will be labeled as Passed as long as no failures occurred.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • description : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • addRunToTrendReport : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • trendReportId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • HTTPSProtocol : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • proxyOutURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Add your local proxy as following: http(s)://host:port
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  or Leave empty if not using a local proxy. The following proxy configurations are not supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • PAC (proxy auto-config).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Automatic configuration script.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsProxyId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • retry : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • retryDelay : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • retryOccurrences : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • authenticateWithToken : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  From LRE 2021 R1, you can use a token associated with your user for authentication.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If LRE is defined to use SSO, this will be the only way for this plugin to authenticate to LRE.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  To use it, have a token issued to your user in LRE.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  In Jenkins, create new Jenkins credentials based on the LRE token you received: use the ClientIdKey in the Username and the ClientSecretKey key in the password.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Then use the new Jenkins credentials with this checkbox switched on.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • peassOverview
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • projects (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • project : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • referencePoint : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • activateDTConfiguration
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • dynatraceProfile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • configuration : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • createMemoryDump
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • dynatraceProfile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • agent : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • host : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • autoPostProcess : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • capturePrimitives : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • captureStrings : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • dogc : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • lockSession : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • type : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • startSession
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • dynatraceProfile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testCase : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • lockSession : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • recordingOption : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • stopSession
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • dynatraceProfile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • createThreadDump
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • dynatraceProfile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • agent : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • host : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • lockSession : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'PerformanceAnalysisBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testjob : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify the data set name that contains the mainframe job that you want to run the performance benchmarking for, for example, TEST.POC.JCLLIB(TESTJOB).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The maximum length is 44 characters.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Ensure that the job is included in the monitoring scope of the MAT Performance Benchmarking plugin by Broadcom.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • blazeMeterTest
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Select the BlazeMeter credentials to use.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • workspaceId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  BlazeMeter's plugin for Jenkins allows users to automate load tests from the cloud post build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Just choose the test you want to run. Let Jenkins start and stop the test and document the results.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  After the run, a test report will be generated directly into Jenkins and your BlazeMeter account.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If the test list is empty, you must insert your unique BlazeMeter API key into the Jenkins settings, or create a test in your BlazeMeter account.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • abortJob : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If checked and BlazeMeter test has fails plugin will throw AbortException
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • additionalTestFiles : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Before the test runs these files will be pushed to the selected BlazeMeter test. Existing files with the same name will be replaced. Provide a list of files that are locate in job workspace(relative path, each file on a new line).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Limitations: Supported test types: Taurus, FunctionalApi, JMeter
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • getJtl : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Check this box if you need to download JTL report after test will be over.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • getJunit : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Check this box if you need to download junit report after test will be over.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • jobApiKey : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • jtlPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Here you can define desired location for downloading jtl artifact.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Plugin supports both absolute and relative paths.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Jenkins environment variables will be resolved.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • junitPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Here you can define desired location for downloading junit artifact.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Plugin supports both absolute and relative paths.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Jenkins environment variables will be resolved.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • mainTestFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Before the test runs this file will be pushed to the selected BlazeMeter test and select as executable file. Existing file with the same name will be replaced. Provide a file that is locate in job workspace(relative path).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Limitations: For Taurus and FunctionalApi tests will set 'Test type': JMeter if file has '.jmx' extension and Taurus - for '.yml' and '.yaml' files. Other 'Test types', please, set in the BlazeMeter application. Supported test types: Taurus, FunctionalApi, JMeter
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • notes : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Enter here some notes that you want to attached to test report.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • reportLinkName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Report link name that you will see in your build. By default it'll set: "BlazeMeter report: BLAZEMETER_TEST_NAME", where BLAZEMETER_TEST_NAME is a test name from app. By default max report link name length = 35, but you can increase this value using Java System property or Jenkins environment variable "bzm.reportLinkName.length"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • serverUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • sessionProperties : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Define jmeter properties for particular session in format key1=value1,key2=value2,key3=value3.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Properties will be pushed to every separate session of master session.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • bzt
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Execute Taurus with configuration files and options. You can simply specify JMX file to run, or give list of Taurus config files and options to execute.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • params : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • alwaysUseVirtualenv : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • bztVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • generatePerformanceTrend : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • printDebugOutput : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • useBztExitCode : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • useSystemSitePackages : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • virtualEnvCommand : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • workingDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • workspace : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'PhingBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • buildFile : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If your build requires a custom -buildfile, specify it here. By default Phing will use the build.xml in the module directory, this option can be used to use build files with a different name or in somewhere outside the top directory.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  And you can use environment variables such like ''$WORKSPACE''.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • targets : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify a list of Phing targets to be invoked, or leave it empty to invoke the default Phing target specified in the build script.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • properties : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Properties needed by your phing build can be specified here (in the standard properties file format):
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  # comment
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  name1=value1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  name2=value2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  These are passed to Phing like "-Dname1=value1 -Dname2=value2"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • useModuleRoot : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • options : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'PipelineGenerationStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • project : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Name of the project. It is used as an identifier in the corresponding pipelines, folders and jobs being generated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • projectScmType : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Type of the SCM. Currently only svn and git are supported.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • projectScmUrl : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  URL to the project SCM. Without any branch indication.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • For svn, URL to the root of the project, without trunk or branches.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • For git, URL of the remote.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • projectScmCredentials : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ID or UUID of the Jenkins credentials to use when connecting to the project SCM.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • branch : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  SCM branch.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • seedProject : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Project name useable for folders, job names, etc.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • seedBranch : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Branch name useable for folders, job names, etc.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • disableDslScript : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If checked, the pipeline generation disallows the direct execution of a DSL Groovy script. Only DSL libraries, configured through a seed.properties file are allowed. By default, both modes are allowed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scriptDirectory : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Path to the directory which contains the pipeline script. Defaults to seed if not filled.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • plot
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • group : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • style : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • csvFileName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • csvSeries (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • inclusionFlag : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • exclusionValues : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • displayTableFlag : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • description : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • exclZero : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • keepRecords : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • logarithmic : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • numBuilds : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • propertiesSeries (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • title : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • useDescr : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • xmlSeries (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • xpath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • nodeType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • yaxis : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • yaxisMaximum : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • yaxisMinimum : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'PolarisBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • createChangeSetFile (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Creates a file at $CHANGE_SET_FILE_PATH (by default, the workspace directory) containing a list of files generated from the Jenkins-provided scm changeset.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Used for Incremental analysis (--incremental) as the file containing the list of changed files for analysis.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • buildStatusOnSkip (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The action to take when static analysis is skipped because the changeset contained no files to analyze. Defaults to "Mark the build as Unstable".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Values: SUCCESS, FAILURE, UNSTABLE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • changeSetExclusionPatterns : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Specify a comma separated list of filename patterns that you would like to explicitly excluded from the Jenkins-provided SCM changeset.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The pattern is applied to determine which files will be populated in the changeset file, stored at $CHANGE_SET_FILE_PATH.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If blank, will exclude none.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Examples:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    File Name Pattern Will be excluded
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    test.java *.java Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    test.java *.jpg No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    test.java test.* Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    test.java test.???? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    test.java test.????? No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • changeSetInclusionPatterns : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Specify a comma separated list of filename patterns that you would like to explicitly included Jenkins-provided SCM changeset.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The pattern is applied to determine which files will be populated in the changeset file, stored at $CHANGE_SET_FILE_PATH.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If blank, will include all. Examples:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    File Name Pattern Will be included
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    test.java *.java Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    test.java *.jpg No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    test.java test.* Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    test.java test.???? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    test.java test.????? No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • polarisArguments : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The command line arguments to pass to the CLI

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • polarisCliName : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The CLI installation to execute

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • waitForIssues (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Check this box to wait for CLI jobs to complete and set the build status based on issues discovered

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • buildStatusForIssues (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The build status to set the project to if there are issues

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Values: SUCCESS, FAILURE, UNSTABLE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • jobTimeoutInMinutes : int (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The maximum number of minutes to wait for jobs started by the Polaris CLI to complete when the Polaris CLI is executed without -w (nonblocking mode). Must be a positive integer, defaults to 30 minutes.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fortiCWPScanner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • imageName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Name of the image to scan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • block : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'PortScannerStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                This plugin performs, detects open ports and supported TLS ciphers and checks cipher strength via https://ciphersuite.info/.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scanDest : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Scan destination: IP address or host name

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • repName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • enableCipherDetection : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If active, detect supported ciphers and check the cipher strength via https://ciphersuite.info/.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • portshift_vulnerability_scanner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • accessKey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The access key of the service account used to communicate with the Portshift management server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • secretKey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The secret key of the service account used to communicate with the Portshift management server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • imageName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The name of the image to scan.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • imageTag : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The tag of the image to scan. If empty default to 'latest'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The URL of the Portshift management server. e.g: console.portshift.io
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scannerIp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The scanner IP (for clair)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'PowerShell'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • stopOnError : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Stops script when some step fails. Similar to Shell set -e. Translates to $ErrorActionPreference Stop or Continue. See documentation.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • useProfile : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Runs script with default profile or no profile. See documentation.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • unstableReturn : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If set, the script exit code that will be interpreted as an unstable build result. If the final exit code matches the value, the build results will be set to unstable. The value 0 is ignored and does not make the build unstable to keep the default behaviour consistent.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'PowerShellBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • buildStepId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • defineArgs : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • buildStepArgs
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • arg : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'PreflightBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • clientId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  (required) Client Id for PreFlight API. You can generate client id and client secret from Account Settings>API under your Preflight account.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • clientSecret : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  (required) Client Secret for PreFlight API. You can generate client id and client secret from Account Settings>API under your Preflight account.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  (optional) Pass the Test Id to run. If test id or group id are not passed all the tests will be run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • groupId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  (optional) Pass the Group Id to run. If test id or group id are not passed all the tests will be run. You can get it from Test Settings>Groups under your Preflight account.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • environmentId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  (optional) Environment ID for your test group. You can get it from Test Settings>Environments under your Preflight account.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • platforms : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  (optional) Platforms and browsers you want to run your PreFlight tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Example usage win-chrome.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • You can pass more than one browser option. Ex. win-chrome,win-firefox
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Platform options : win
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Browser options : chrome, ie, edge, firefox
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • sizes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  (optional) Sizes you want to run your PreFlight tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Example usage. (WidthxHeight) 1440x900.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • You can pass more than one size option. Ex. 1920x1080, 1440x900
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Size options : 1920x1080, 1440x900, 1024x768, 480x640
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • captureScreenshots : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Capture screenshots enables taking screenshots of the each step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • waitResults : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Wait PreFlight test result(s). If you set it as true, your Jenkins build waits your PreFlight test result(s).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'PrereqBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • warningOnly : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • probelyScan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • targetId : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ID of the target you want Probely to scan.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • authToken : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Raw Probely API authentication key.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Please use the credentialsId field instead, unless you understand the security implications of using this mechanism. Passing the API authentication token directly is not advised, unless it is properly secured using a secret storage mechanism, such as HashiCorp Vault.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Credential identifier for the Probely API authentication key.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • failThreshold : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Mark the build as failed if a vulnerability with the following severity level is found.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • stopIfFailed : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If the build fails because the target is vulnerable, stop scanning for more vulnerabilities.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • waitForScan : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Wait for the scan to complete before proceeding to the next step in the pipeline.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Since a scan can take a long time, the plugin will return as soon as the scan starts. This is enabled by default to make the build faster.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Please note that disabling this option implies that the build step always finishes successfully, even if vulnerabilities are found later on.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Enabling this option allows the plugin to mark the build as failed if it finds any vulnerabilities.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ProjectGenerationStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • projectConfig
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • pipelineConfig
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • destructor : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • authorisations : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • branchSCMParameter : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • branchParameters : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • generationExtension : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pipelineGenerationExtension : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • disableDslScript : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • scriptDirectory : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • namingStrategy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectFolderPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • branchFolderPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectSeedName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectDestructorName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • branchSeedName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • branchStartName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • branchName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ignoredBranchPrefixes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • eventStrategy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • delete : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • auto : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • trigger : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • commit : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • project : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • scmType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • scmUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • scmCredentials : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • triggerIdentifier : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • triggerType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • triggerSecret : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ProjectPrerequisitesInstaller'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • protecodesc
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    BDBA supports both username/password and an API token.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • protecodeScGroup : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Specify the BDBA Group ID where the artifacts should be uploaded to.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Group ID can be found from the BDBA service by looking at the URL when browsing an individual group: https://protecode-sc.mydomain.com/group/1234/ or with Groups API https://protecode-sc.mydomain.com/api/groups/.


                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Please notice that this value should be a number, not the name or the path to the group.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • convertToSummary : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The summary can be shown using Summary Display Jenkins Plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The report file name to publish is protecodesc.xml.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If you wish to see only the latest results in the summary, you can run a "shell command" build step before the BDBA build step: "rm -rf reports". You can find the mentioned build step in the list of possible build steps on the build configuration page. Please notice that this action is irreversible.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • customHeader : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Please specify the custom header in JSON format for fetching a file by URL

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This is for the cases where the server from which BDBA must fetch the file requires authentication or similar header values.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    For example {"Customheader": "Foobar", "token": "oooooooo1!"}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • directoryToScan : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Please specify the directory in the workspace you wish to scan.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Alternatively you can specify the URL of the file you wish to scan, BDBA will fetch the file from the given URL

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    For files in the workarea, if you wish to use an absolute path put '/' at the beginning of the path, this will cause the plugin to not try to find the folder from the build workspace. Please notice that it is possible to upload massive amounts of files if this option is set to absolute path and the 'Include subdirectories' is enabled.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If there are 10 or more files to scan, the plugin will zip them before sending them. You can specify the name for the BDBA scan job in the field "Scan job name (used only for zip)".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • dontZipFiles : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Do not zip files in any situation. Usually the BDBA plugin zips files if there are more than 50, to avoid transfer overhead. This configuration item is ignored if the BDBA instance is Synopsys hosted.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • endAfterSendingFiles : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Whether to end the build phase when the files are sent to BDBA. You can see the links to the results in the console.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • failIfVulns : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Trigger build failure if BDBA finds vulnerabilities from the scanned files. The build will always fail if the connection or api calls to BDBA returned any errors.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • includeSubdirectories : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Also include subdirectories of the directory from which the build attempts to find files to scan.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Please notice that if this is selected, it is possible to accidentally upload massive amounts of files.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • pattern : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Here you can provide a regular expression to include only certain files. The option is the default java Pattern format: https://docs.oracle.com/javase/8/docs/api/java/util/regex/Pattern.html

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Leave blank to include all found files.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • protecodeScanName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    BDBA jenkins plugin will zip given files if there are 10 or more. This is done to avoid file transfer overhead produced by moving many files. The plugin will still show the results per file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • scanOnlyArtifacts : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Scan only Jenkins Artifacts produced by earlier steps of the build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • scanTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Timeout for the scan. If this timeout is exceeded the plugin will not try to get further results from BDBA. If a comprehensive timeout for the build is needed, it is suggested to use the Build Timeout Plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ProxyBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • projectName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • dotnetPublish
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  dotnet publish compiles the application, reads through its dependencies specified in the project file, and publishes the resulting set of files to a directory. The output includes the following assets:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Intermediate Language (IL) code in an assembly with a dll extension.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • A .deps.json file that includes all of the dependencies of the project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • A .runtimeconfig.json file that specifies the shared runtime that the application expects, as well as other configuration options for the runtime (for example, garbage collection type).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • The application's dependencies, which are copied from the NuGet cache into the output folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The dotnet publish command's output is ready for deployment to a hosting system (for example, a server, PC, Mac, laptop) for execution. It's the only officially supported way to prepare the application for deployment. Depending on the type of deployment that the project specifies, the hosting system may or may not have the .NET Core shared runtime installed on it. For more information, see Publish .NET Core apps with the .NET Core CLI .
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • charset : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The character set to use for the step's output. If not specified, the charset associated with the build will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • configuration : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Defines the build configuration. The default for most projects is Debug, but you can override the build configuration settings in your project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • continueOnError : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If this is checked, errors encountered will cause the build status to be set to FAILURE (or UNSTABLE, if configured that way), but the build will be allowed to continue. Otherwise, any such errors will cause the build to be terminated immediately.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • force : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Forces all dependencies to be resolved even if the last restore was successful. Specifying this flag is the same as deleting the project.assets.json file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • framework : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Publishes the application for the specified target framework. You must specify the target framework in the project file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • manifest : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • manifests : Array / List of String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • manifestsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specifies one or several target manifests to use to trim the set of packages published with the app. The manifest file is part of the output of the dotnet store command.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • noBuild : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Doesn't build the project before publishing, and does not perform an implicit restore.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • noDependencies : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Ignores project-to-project references and only restores the root project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • noRestore : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Doesn't execute an implicit restore when running the command.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • nologo : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Doesn't display the startup banner or the copyright message.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Available since: .NET Core SDK 3.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • option : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • options : Array / List of String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • optionsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For more information about these options, see the MSBuild Command-Line Reference.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If targets and/or properties are also configured, those will be passed after these options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • outputDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specifies the path for the output directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If not specified, it defaults to [project_file_folder]./bin/[configuration]/[framework]/publish/ for a runtime-dependent executable and cross-platform binaries. It defaults to [project_file_folder]/bin/[configuration]/[framework]/[runtime]/publish/ for a self-contained executable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        In a web project, if the output folder is in the project folder, successive dotnet publish commands result in nested output folders. For example, if the project folder is myproject, and the publish output folder is myproject/publish, and you run dotnet publish twice, the second run puts content files such as .config and .json files in myproject/publish/publish. To avoid nesting publish folders, specify a publish folder that is not directly under the project folder, or exclude the publish folder from the project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Some behaviour depends on the SDK version:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • .NET Core 3.x SDK and later: If a relative path is specified when publishing a project, the output directory generated is relative to the current working directory, not to the project file location.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If a relative path is specified when publishing a solution, all output for all projects goes into the specified folder relative to the current working directory. To make publish output go to separate folders for each project, specify a relative path by using the msbuild PublishDir property instead of this option.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • .NET Core 2.x SDK: If a relative path is specified when publishing a project, the output directory generated is relative to the project file location, not to the current working directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If a relative path is specified when publishing a solution, each project's output goes into a separate folder relative to the project file location. If an absolute path is specified when publishing a solution, all publish output for all projects goes into the specified folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • project : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The project or solution (or directory containing a project or solution) to publish. If not specified, the current directory is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Note that the use of a solution instead of a project was added in the .NET Core 3.0 SDK.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • properties (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Type: java.util.Map<java.lang.String, java.lang.String>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • propertiesString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Additional MSBuild properties to set. These should be specified one per line, in Java properties syntax .
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Properties of particular interest to dotnet publish:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • PublishProfile=Properties\PublishProfiles\profile.pubxml: Use a .pubxml to set publish-related properties. See Visual Studio publish profiles (.pubxml) for ASP.NET Core app deployment for more information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • PublishReadyToRun=true: Compiles application assemblies as ReadyToRun (R2R) format. R2R is a form of ahead-of-time (AOT) compilation. For more information, see ReadyToRun images.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Available since .NET Core 3.0 SDK.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • PublishSingleFile=true: Packages the app into a platform-specific single-file executable. The executable is self-extracting and contains all dependencies (including native) that are required to run the app. When the app is first run, the application is extracted to a directory based on the app name and build identifier. Startup is faster when the application is run again. The application doesn't need to extract itself a second time unless a new version is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For more information about single-file publishing, see the single-file bundler design document .
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Available since .NET Core 3.0 SDK.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • PublishTrimmed=true: Trims unused libraries to reduce the deployment size of an app when publishing a self-contained executable. For more information, see Trim self-contained deployments and executables .
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Available since .NET Core 3.0 SDK.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Note that it is recommended to specify all of these, other than PublishProfile, in a publish profile rather than here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • runtime : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Publishes the application for a given runtime. For a list of Runtime Identifiers (RIDs), see the RID catalog. For more information, see .NET Core application publishing and Publish .NET Core apps with the .NET Core CLI.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sdk : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Name of a .NET SDK to use so that dotnet will be in the path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If the default is specified, you either need to use the With .NET element (or a withDotNet block in a pipeline script) to specify one, or ensure this step runs on a node that has a .NET SDK installed and in the path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • selfContained : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Publishes the .NET Core runtime with your application so the runtime doesn't need to be installed on the target machine. Enabled by default if a runtime identifier is specified and the project is an executable project (not a library project). For more information, see .NET Core application publishing and Publish .NET Core apps with the .NET Core CLI.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • showSdkInfo : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If enabled, dotnet --info will be executed before the main command. This shows a list of available SDKs and runtimes, indicating which one is currently being used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • shutDownBuildServers : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If enabled, dotnet build-server shutdown will be executed after the main command, shutting down build servers that may have been started.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Note: If this is not specified, a build that causes such a build server to be started may hang until those server processes end. As such, it's recommended to specify this for the last .NET-related step in a job. If using multiple SDKs, each needs its own shutdown (e.g. the .NET Core 3.1 SDK will not shut down build servers from the .NET 5.0 SDK).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Available since: .NET Core SDK 2.1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • specificSdkVersion : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Depending on the platform, the dotnet executable may use the most recent SDK available on the system, even when PATH is set up to find an older SDK deployment first; see this page for more information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        By enabling this option, the configured SDK home directory will be checked, and if it only includes a single SDK deployment, a global.json file will be created in the current directory, referencing that SDK version and disabling roll-forward.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Note: This will silently overwrite any global.json already present in the current directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • unstableIfErrors : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If this is set and the build completes with errors, the build will be marked as unstable instead of failed, and execution will continue to the next step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • unstableIfWarnings : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If this is set and the build completes with warnings (but no errors), the build will be marked as unstable instead of successful.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verbosity : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Sets the MSBuild verbosity level.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • versionSuffix : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Defines the version suffix to replace the asterisk (*) in the version field of the project file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The directory in which to execute the command. By default, this is the current directory (for freestyle jobs, that is the root of the job's workspace).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • snPublishApp
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        User name and password defined in global credentials (credentials ID is required here) used for the instance where the application will be published.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Optional. Version of the endpoint to access. For example, v1 or v2. Only specify this value to use an endpoint version other than the latest.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • appScope : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Required if application system ID is not specified. The scope name of the application for which to apply the changes, such as x_aah_custom_app. You can locate this value in the scope field in the Custom Application [sys_app] table.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • appSysId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Required if application scope is not specified. The system id of the application for which to apply the changes. You can locate this value in the Sys ID field in the Custom Application [sys_app] table.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • appVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Version under which to store the application. Provide 2 significant numbers separated by '.' eg. 1.0 (the third number will be automatically added with build number, what gives eg. 1.0.106).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If the version number is passed, the publish process uses that version and updates the local application version if different. If the version number is not passed, the publish process uses the current version of the local application.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • devNotes : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Developer notes to store with the application.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • incrementBy : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • isAppCustomization : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • obtainVersionAutomatically : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Calculate next application version that will be published. Retrieve it in smart way using API or source control (if SCM is configured for the build). API has the highest priority, then SCM will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The value from ''Application version'' will be ignored.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • url : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        ServiceNow instance url where the application will be published to.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • artifactVersion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • description : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • type : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • groupId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • artifactId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • stage : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • flow : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • stageDescription : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • version : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'PublishBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • packageid : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Enter an ID for the build artifact you want to publish. This must match that specified in the build step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • nugetFeedUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • nugetFeedApiKey
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • packageVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Optionally, set a custom package version. If this is left blank, the version 1.0.${BUILD_NUMBER} will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sqlChangeAutomationVersionOption
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Values: Latest, Specific
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • specificVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • publishReport
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • jsonFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • jsonString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The configuration must be a valid JSON object with respect to the given Schema. Each item from the components list can in turn contain a list of items. This nesting can be used arbitrarily deep.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Example

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        { "items": [ { "id": "stocks", "name": "Stocks", "items": [ { "id": "alphabet", "name": "Google", "result": { "incorrect": 1, "manually": 1, "accurate": 4 } }, { "id": "microsoft", "name": "Microsoft", "result": { "incorrect": 2, "manually": 1, "accurate": 5 } } ] }, { "id": "derivates", "name": "Derivates", "result": { "incorrect": 2, "manually": 3, "accurate": 10 } }, { "id": "fonds", "name": "Fonds", "result": { "incorrect": 6, "manually": 7, "accurate": 20 } }, { "id": "warrants", "name": "Warrants", "result": { "incorrect": 6, "manually": 4, "accurate": 15 } } ], "colors": { "incorrect": "#EF9A9A", "manually": "#FFF59D", "accurate": "#A5D6A7" } }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'PublishStepBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • packageId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • nugetFeedUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • nugetFeedUrlApi
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • packageVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'PullRequestCommenter'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • comment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • dotnetNuGetPush
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The dotnet nuget push command pushes a package to the server and publishes it. The push command uses server and credential details found in the system's NuGet config file or chain of config files. For more information on config files, see Configuring NuGet Behavior. NuGet's default configuration is obtained by loading %AppData%\NuGet\NuGet.config (Windows) or $HOME/.local/share (Linux/macOS), then loading any nuget.config or .nuget\nuget.config starting from the root of drive and ending in the current directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The command pushes an existing package. It doesn't create a package. To create a package, use dotnet pack.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiKeyId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The API key for the server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • charset : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The character set to use for the step's output. If not specified, the charset associated with the build will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • continueOnError : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If this is checked, errors encountered will cause the build status to be set to FAILURE (or UNSTABLE, if configured that way), but the build will be allowed to continue. Otherwise, any such errors will cause the build to be terminated immediately.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • disableBuffering : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Disables buffering when pushing to an HTTP(S) server to reduce memory usage.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • forceEnglishOutput : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Forces the application to run using an invariant, English-based culture.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • noServiceEndpoint : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Doesn't append "api/v2/package" to the source URL.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Available since: .NET Core SDK 2.1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • noSymbols : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Doesn't push symbols (even if present).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • root : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specifies the file path to the package(s) to be pushed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sdk : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Name of a .NET SDK to use so that dotnet will be in the path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If the default is specified, you either need to use the With .NET element (or a withDotNet block in a pipeline script) to specify one, or ensure this step runs on a node that has a .NET SDK installed and in the path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • showSdkInfo : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If enabled, dotnet --info will be executed before the main command. This shows a list of available SDKs and runtimes, indicating which one is currently being used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • skipDuplicate : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        When pushing multiple packages to an HTTP(S) server, treats any 409 Conflict response as a warning so that the push can continue.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Available since: .NET Core SDK 3.1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • source : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specifies the server URL. Supported URLs for nuget.org include https://www.nuget.org, https://www.nuget.org/api/v3, and https://www.nuget.org/api/v2/package. For private feeds, replace the host name (for example, %hostname%/api/v3).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This option is required unless DefaultPushSource config value is set in the NuGet config file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • specificSdkVersion : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Depending on the platform, the dotnet executable may use the most recent SDK available on the system, even when PATH is set up to find an older SDK deployment first; see this page for more information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        By enabling this option, the configured SDK home directory will be checked, and if it only includes a single SDK deployment, a global.json file will be created in the current directory, referencing that SDK version and disabling roll-forward.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Note: This will silently overwrite any global.json already present in the current directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • symbolApiKeyId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The API key for the symbol server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • symbolSource : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specifies the symbol server URL.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • timeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specifies the timeout for pushing to a server in seconds. Defaults to 300 seconds (5 minutes). Specifying 0 (zero seconds) applies the default value.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The directory in which to execute the command. By default, this is the current directory (for freestyle jobs, that is the root of the job's workspace).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • artifactVersion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • stage : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • version : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'PushBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • remoteImageStrategy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Values: DO_NOT_USE, GENERATE_GIT, FIXED
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • hubUrls : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Optional parameter. Multiple hub urls, comma separated. Eg: https://turbo.net, https://stage.turbo.net
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        When multiple hubs are specified, the image will be pushed to all hubs.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • organization : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Overwrite organization in the following pattern:&ltorganization>/&ltproject>:&ltbranch name>.&ltfirst 6 numbers of current HEAD>.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • overwriteOrganization : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • remoteImageName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Required parameter. Image name in the remote registry.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • dateFormat : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Format can be any date or time pattern. Supported symbols:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        y|Y Year
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        M Month
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        w Week in year
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        W Week in month
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        D Day in year
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        d Day in month
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        F Day of week in month
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        E Day name in week
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        u Day number of week (1 = Monday, ..., 7 = Sunday)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        H Hour in day (0-23)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        k Hour in day (1-24)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        K Hour in am/pm (0-11)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        h Hour in am/pm (1-12)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Examples
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • yyMMddHHmm
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • YYYY-MM-DD
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • appendDate : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • incrementVersion : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Adds one to the latest image version found in the remote hub.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Python'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Runs a Python script (defaults to python interpreter) for building the project. The script will be run with the workspace as the current directory.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'PythonBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • pythonName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • nature : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ignoreExitCode : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • qualityCloudsScan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • instanceUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • issuesCountThreshold : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • techDebtThreshold : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • qcThreshold : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • highSeverityThreshold : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'QFTestConfigBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The QF-Test build step. Invokes QF-Test binary during your Jenkins job. If not listed in your PATH variable, the location of the QF-Test binary can be specified explicitly.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The actual test configuration is set via pairs of arguments and suite file fields. The Advanced Test result control button allows to adjust the mapping between the QF-Test result and the Jenkins build result.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      All report files that are produced will be stored in an output directory relative to your workspace, whose structure is as follows:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          <LOGDIR>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              ├── html        (HTML report directory)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              ├── junit       (junit report directory)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              └── qrz         (QF-Test runlogs)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The resulting runlogs are automatically declared as Jenkins build artificats and should appear as such on the Jenkins build page. The junit and html reports can be processed further by the junit respectively the publishHTML plugin.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • suitefield
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • suitename : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Path to the suite file(s) to be run. Absolute or relative to the current workspace. Ant-style globbing is supported. A path referencing an entire directory translates to <path to directory>/**/*.qft.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          A suitesfile can also be provided. For this, preprend the file path with the -suitesfile option.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • customParam : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Additional arguments to be passed to the QF-Test call. Consult the manual for a complete list of all possible options. This is an optional parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • customPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • onTestError : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • onTestException : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • onTestFailure : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • onTestWarning : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • reportDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specifies the top level directory for logfiles that are automatically generated by the QF-Test plugin. The given path is relative to the current workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • reportGenArgs : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Additional arguments to be passed to the final QF-Test call which is generating the report (i.e. QF-Test runs in -genreport mode). Consult the manual for a complete list of all possible options. This is an optional parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'QualityCenter'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • qcClientInstallationName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • qcQTPAddinInstallationName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • qcServerURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This must be the URL pointing to the qcbin folder of the Quality Center Web application.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • qcLogin : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • qcPass : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • qcDomain : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • qcProject : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • qcTSFolder : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • qcTSName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        List of test sets (one test set per line) to run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • qcTSLogFile : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Name of the report that will be generated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If several test sets are run in one build step, one report will be generated per test set. As such, you must ensure that the name will be unique by including the test set name in it (through the ${TS_NAME} variable). If it's not the case, then the name will be automatically post fixed with an underscore followed by the test set name.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        You can use all standard environment variables plus:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ${QC_DOMAIN} for the current Quality Center domain;
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ${QC_PROJECT} for the current Quality Center project;
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ${TS_FOLDER} for the current TestSet folder;
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ${TS_NAME} for the TestSet name.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • qcTimeOut : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Number of seconds before timeout. If left empty, default is 600.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • runMode : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Defines how the test set has to be executed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • RUN_PLANNED_HOST: The test set will be run on the host defined in Quality Center.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • RUN_REMOTE: The test set will be run on a host specified using the Run Host field.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • RUN_LOCAL: The test set will be run on the machine which performs the build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • runHost : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If the Run Mode field is set to RUN_REMOTE, use this field to specify the name of the host which is intended to run the test set.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • acrQuickTask
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • azureCredentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • resourceGroupName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The resource group name that the app will be associated with.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • registryName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The Azure Container Registry name, the built image will be pushed to.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • architecture : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The OS architecture.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildArgs (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Set build-time variables as docker build --build-arg.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • key : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • secrecy : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • dockerfile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Relative path to the source control management(git path or local directory) for the Dockerfile.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • gitPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Relative path in the git repo's selected branch, which will be used as docker build path. Empty means root path in the git repo.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • gitRefspec : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • gitRepo : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Git repo which contains source code and Dockerfile, which will be used to build image. Please use the URL with HTTP(S) protocol instead of SSH protocol Use https://PAT@github.com/user/repo.git for private repo.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • imageNames (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        After Azure Container Registry finishes building image, it pushes the image to registry with tags provided. Single Built image can be pushed with multiple repositories and tags. If no image name provided, Azure Container Registry **WILL NOT** push any image to registry after building.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • image : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • local : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Build docker image from a local directory. This directory will be uploaded to Azure Container Registry. It also will be used as docker build path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • noCache : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Do not use cache when building the image. Enable the no-cache flag when build as docker build --no-cache
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • os : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The operating system type required for the run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sourceType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tarball : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Files in a compressed archive on a remote web server. e.g.http://remoteserver/myapp.tar.gz
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • timeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Maximum duration for a docker build to execute in seconds. Should be in 300 to 28800.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • variant : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Variant of the CPU.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'R'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Runs an R script (defaults to RScript interpreter) for building the project. The script will be run with the workspace as the current directory.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'RAD'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For projects that need to use RAD's headless capabilities (or, even better, BU) as the build system. This causes Hudson to invoke RAD/BU with the given targets and options. Any non-zero exit code causes Hudson to mark the build as a failure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Hudson supplies some environment variables that can be used from within the build script.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      To know more about RAD's headless features, please refer to the RAD 7.0 Infocenter or to the RAD 7.5 Infocenter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • activateProjectWorkspaceVar : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Set this option if you want to get an equivalent of Hudson's WORKSPACE environment variable through the PROJECT_WORKSPACE one.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Wether you set this option or not, be sure to never use the WORKSPACE variable during this build step as it doesn't refer to the workspace of the project: It is internally used by RAD.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify the build file to use. If not specified, RAD will use the build.xml one in the project's workspace. The base directory is the workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • deleteRadWorkspaceContent : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Set this option if you want the RAD workspace folder to be emptied before RAD is actually run. This will also remove the .metadata folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • deleteRadWorkspaceMetadata : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Set this option if the .metadata folder of RAD's workspace has to be removed before RAD is actually run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • properties : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Properties needed by the build can be specified here (in the standard properties file format):
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                # comment
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                name1=value1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                name2=value2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        These are passed to RAD like "-Dname1=value1 -Dname2=value2"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • radInstallationName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Set the RAD installation to be used to run the build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • radWorkspace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify the RAD workspace to be used. This workspace must not be the same as the project's workspace. If the workspace doesn't exist, it will be created. If no workspace is specified, a default one will be created, named <project name>-rad-workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The base folder is the project's workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • targets : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify a list of targets to be invoked, or leave it empty to invoke the default target specified in the build script. Additionally, you can also use this field to specify other Ant options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'RPDCreateInstance'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • pack : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Name of the package from which you want to create the RPD instance.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • instanceName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Custom name for the RPD instance that you want to create.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • customProfile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'RPDDeployInstance'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • instanceName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Custom name of the RPD instance that you want to deploy.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • pack : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Name of the package containing the RPD instance that you want to deploy.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • environment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Environment where to deploy the RPD instance.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • route : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Route where to deploy the RPD instance.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • customProfile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • useCustomProfile : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'RTCGitBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • serverURI : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The Jazz Repository connection URI for the Rational Team Concert (RTC) server

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Credentials to use for the build user. A user name and password credential for the Jazz Repository should be configured.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • annotateChangeLog : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Optionally hyperlink bug numbers that appear in git commit descriptions as links to Rational Team Concert Work Items.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildDefinition : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The ID of the Hudson/Jenkins build definition within the Rational Team Concert (RTC) server. The build definition should not have any Source Control option.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • jenkinsRootURI : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • jenkinsRootURIOverride : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Optionally specify the HTTP address of the Jenkins installation, such as http://yourhost.yourdomain/jenkins/. This is necessary because the Rational Team Concert Git plugin cannot reliably detect such a URL from within itself.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • timeout : int (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The timeout period in seconds for Jazz repository requests made during the build.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • trackBuildWorkItem : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify an Id of a Work Item in Rational Team Concert. The Work Item will be updated with the execution status of the Jenkins build.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • useBuildDefinition : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • useTrackBuildWorkItem : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • useWorkItems : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workItemUpdateType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • rabbitMQPublisher
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This build step can be used to publish message to Rabbit-MQ.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • rabbitName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • exchange : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The name of the exchange.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • data : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Data to send, in raw format, json format or list of key/value.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Can contains environment variables (preferred) and build parameters (eg: ${FOO} or $FOO) which will be resolve before sending the message. Can also use ${BUILD_USER_ID} and ${BUILD_USER_NAME} to retrieve the information's user who launch the job.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • conversion : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        if checked, there will be Spring escaping . It is especially important with Json formatting .
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • if Checked, the message is "{\"step\":\"end\"}"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • if unchecked, the message is {"step":"end"}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • routingKey : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        An explicit routing key binding the queue to this exchange.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • toJson : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • If check : convert the data to a JSON object, following java nomenclature for field name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The data must be a list in the format key=value and the key must start with a letter character
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • If uncheck : the raw message without transformation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'RadarGunBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • radarGunInstance
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        RadarGun installation to be used
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'RadarGunCustomInstallation'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • home : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'RadarGunInstallationWrapper'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • radarGunName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • scenarioSource
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        RadarGun scenario to be executed
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'FileScenarioSource'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • scenarioPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TextScenarioSource'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • scenario : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • nodeSource
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        List of the nodes where RadarGun will run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'FileNodeConfigSource'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • nodeListPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TextNodeConfigSource'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • nodes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • scriptSource
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Script which will be used for starting appropriate processes on nodes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'BuildInScriptSource'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'FileScriptSource'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • mainPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • workerPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TextScriptSource'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • mainScript : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • workerScript : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • remoteLoginProgram : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • remoteLogin : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • workspacePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • pluginPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • pluginConfigPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • reporterPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Rake'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rakeInstallation : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rakeFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tasks : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rakeLibDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rakeWorkingDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • silent : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • bundleExec : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'RallyBuild'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • preRallyState
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • stateName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • issueString : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • updateOnce : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • preComment
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • preCommentText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • preReady
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • preReadyState : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • changeReady
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • issueReady : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • createComment
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • commentText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • changeRallyState
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • issueRallyState : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • changeDefectRallyState
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • defectRallyState : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • rancherRedeploy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credential : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • workload : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          you can find your workload API path in Rancher2.x web UI-->Cluster->Project->Resources->Workloads,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          copy the workload link address, eg: http://localhost/p/c-h4hxd:p-dwqfr/workload/deployment:jenkins:jenkins
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          or click the menu icon and select "View in API", will open in new browser tab. copy that url to here.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          since endpoint part has bean set in Credential, you only need specify path from "/p/" or "/project", eg:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          /project/c-h4hxd:p-c9j8z/workloads/deployment:default:busybox
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          or /p/c-h4hxd:p-dwqfr/workload/deployment:jenkins:jenkins

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • images : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          update image version to your excepted. optional if you use latest as image version or imagePullPolicy="Always"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          you can use semicolon(;) to split multiple images, eg:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          nginx;nginx:1.0;myteam/myproject:v2.0;docker.io/team/image:v1.0.${BUILD_NUMBER}

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          this plugin will update all images in this workload by match the name part exactly, and simply set version part as you specified. so you may need Jenkins variables to dynamic generate new version number.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • alwaysPull : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          set imagePullPolicy to "Always"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • rancher
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • environmentId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • endpoint : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • service : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • image : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • confirm : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • startFirst : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ports : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • environments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ranorex
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • cmdLineArgs : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Allows you to add Ranorex command line arguments. Some of the most important ones include:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Flag Function
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          config | cfg:<config parameter name>=<value>  Set values for configuration parameters.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          reportlevel | rl: Debug|Info|Warn|Error|Success|Failure|<any integer>  Sets the minimum report level that log messages need to have in order to be included in the log file. Specify 'None' to completely disable reporting. These levels correspond to the following integer values: Debug=10,Info=20,Warn=30,Error=40,Success=110,Failure=120
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          testcase | tc:<name or guid of test case> Runs this test case only.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          testsuite | ts:<path to test suite file> Runs the test cases defined by the test suite (rxtst) file. By default the rxtst file with the same name as the <TestSuiteExe> is used or the first rxtst file in the same folder as <TestSuiteExe>.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          module | mo:<module name or guid> Runs the module with the specified name or guid. Assemblies loaded by <TestSuiteExe> and assemblies referenced in the rxtst file are searched.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          testcaseparam | tcpa:<name or guid of test case>:<parameter name>=<value> Creates or overrides values for testcase parameters specified in the test suite.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          runlabel | rul:<custom value> Sets a custom runlabel for the test run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          testcasedatarange | tcdr:<name or guid of test case>=<data range> Sets the data range for a testcase.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rxGlobalParameter : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Allows you to create or override values for global parameters set in the test suite. Enter parameters according to the following pattern: "ParameterName=Value" Separate parameters with semicolons or add one parameter per line.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rxJUnitReport : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rxReportDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Allows you to specify the directory that your report will be saved to. If no path is specified, the location of your Ranorex Test Suite file will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rxReportExtension : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rxReportFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Allows you to specify the file name of the report with the standard placeholders available in the test suite settings. By default, the following pattern is used (%S_%Y%M%D_%T).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rxRunConfiguration : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Runs the test suite using one of the run configurations available in the test suite. Enter the exact name of the run configuration you want to use. By default, the run configuration currently selected in the test suite is used. If you want to create or edit run configurations, please use Ranorex Studio or the Ranorex Test Suite Runner.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rxTestRail : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Reports the test run results to TestRail via API. Requires 'Test Rail User' and 'Test Rail Password'.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rxTestRailPassword : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Password or API key for the user specified in 'Test Rail User'.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rxTestRailRID : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          (Optional) The identifier of an existing test run in TestRail to report test results to. Without this argument a new test run is created.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rxTestRailRunName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          (Optional) Creates a new test run in TestRail with the specified name to report test results to. Without this argument the default name is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rxTestRailUser : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Email used to sign in to TestRail.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rxTestSuiteFilePath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Enter the path to the test suite file (*.rxtst) located in the output folder of your solution.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rxZippedReport : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Compresses the report and the associated files into a single archive with the .rxzlog extension. The following additional input fields will appear when this option is enabled:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Compressed report directory
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Compressed report file name
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rxZippedReportDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Allows you to specify the directory that your compressed report will be saved to. If no path is specified, the location of your Ranorex Test Suite file will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rxZippedReportFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Allows you to specify the file name of the compressed report with the standard placeholders available in the test suite settings. If no filename is specified, the same name as the "Ranorex Report File Name" is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'RapidDeployJobPlanRunner'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • serverUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The URL to the RapidDeploy you want to connect to, including the protocol (e.g.: http://192.168.1.1:8090/MidVision).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • authenticationToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The authentication token to connect to RapidDeploy. It can be generated by the MidVision encryptor tool.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • jobPlan : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The id of the job plan you want to run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • asynchronousJob : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Check this box to run the RapidDeploy job asynchronously. This will continue to the next Jenkins step immediately once the job request has been made to RapidDeploy. Use this to run jobs in parallel.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • showIndividualLogs : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Check this box if you want to see the individual logs from all the deployments included in the RapidDeploy job plan.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • showFullLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Check this box if you want to see the full log of the RapidDeploy deployment in the Jenkins job log, otherwise you'll see a link to retrieve them from the RapidDeploy server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'RapidDeployJobRunner'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • serverUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The URL to the RapidDeploy you want to connect to, including the protocol (e.g.: http://192.168.1.1:8090/MidVision).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • authenticationToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The authentication token to connect to RapidDeploy. It can be generated by the MidVision encryptor tool.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • project : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The name of the project you want to deploy.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • target : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The project target to deploy to (i.e.: SERVER.INSTALLATION.CONFIGURATION).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • packageName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The name of the deployment package to deploy. Leave this field blank to deploy the latest package.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • asynchronousJob : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Check this box to run the RapidDeploy job asynchronously. This will continue to the next Jenkins step immediately once the job request has been made to RapidDeploy. Use this to run jobs in parallel.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • showFullLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Check this box if you want to see the full log of the RapidDeploy deployment in the Jenkins job log, otherwise you'll see a link to retrieve them from the RapidDeploy server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'RapidDeployPackageBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • serverUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The URL to the RapidDeploy you want to connect to, including the protocol (e.g.: http://192.168.1.1:8090/MidVision).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • authenticationToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The authentication token to connect to RapidDeploy. It can be generated by the MidVision encryptor tool.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • project : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The name of the project you want to build a deployment package for.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • enableCustomPackageName : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • packageName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The deployment package name. Leave this field blank to create an auto-incremented version package name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • archiveExtension : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The extension of the deployment package file to generate: jar, war, ear, tar, rar or zip.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'RawCliBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • changeLogFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • changeLogParameters : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • commandArguments : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • contexts : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Liquibase contexts to execute under.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • installationName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • labels : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Liquibase labels to execute
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • liquibasePropertiesPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          A liquibase.properties file can be used for default values. Any of the below settings will override what is in this file. This file should be relative to a directory listed in the "Resource directories" section.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • password : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • resourceDirectories : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Leave blank for workspace root. May be relative to workspace or an absolute path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • url : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          example: jdbc:mysql://localhost:3306/sampledb. The JDBC driver must be available in the "lib" directory of your Liquibase installation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • username : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'RebaseBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This works in conjunction with the "This project builds a Subversion feature branch" checkbox above. This build step merges any revisions in the upstream branch, via svn merge, and commits them. This is normally called rebasing in Subversion. Automatic rebasing is useful to keep branches close to the upstream, thereby reducing the risk of integration problem down the road.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        You can rebase from the latest revision in the upstream branch, but you can also do safer rebase by choosing the permalink. For example, if you specify "last stable", then Jenkins will look for the last stable build, then rebase with the corresponding Subversion revision. Thus you know that you are rebasing to the known good state.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If you don't want Jenkins to automatically rebase, you can still use the "Rebase From Upstream" link from the left to manually initiate the rebase.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • permalink : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • stopBuildIfMergeFails : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • setUnstableIfMergeFails : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'RebootIOSDevice'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Reboots tethered iOS devices. This can be used to restore devices to a "clean" state after running tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • cloudTestServerID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Select the server to download iOSAppInstaller.zip from.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • additionalOptions : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If you need to pass any other command line options to the iOSAppInstaller utility, specify them here. You can separate options with new lines as well as whitespaces.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ReconfigureBox'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • id : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • cloud : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • workspace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The workspace in ElasticBox to look for a deployed box to reconfigure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • box : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Box to look for instances in the selected workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • instance : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • variables : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • buildStep : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • buildStepVariables : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ReinstallBox'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • cloud : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • workspace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The workspace in ElasticBox to look for a box instance to reinstall.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • box : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Box to look for instances in the selected workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • instance : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • buildStep : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Instance deployed by the selected preceding Deploy Box build step will be reinstalled.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ReleaseMarker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • releaseName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • services (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • scopedTo (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • applications
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • applications (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • releaseEndTimestamp : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • releaseStartTimestamp : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • androidApkMove
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If you have already uploaded files to Google Play, whether manually, via the "Upload Android AAB/APK to Google Play" post-build action, or by other means, this build step allows you to change the release track for specific versions.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For example, you can use this to promote an app currently in alpha testing to the beta release track, once you've decided it's ready for a wider audience.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Similarly, once you're ready for release, you can move from beta to a staged rollout, or directly to production.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Note that "downgrading" release tracks, e.g. from production to alpha is not possible.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • apkFilesPattern : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • applicationId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Application ID (i.e. APK package name) of the app being assigned to a new release track. This field supports substituting environment variables in the form ${SOME_VARIABLE} or $SOME_VARIABLE at build time.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • filesPattern : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specifies filenames or patterns matching one or more AAB or APK files from which the version codes should be read, in order to determine which app versions should be re-assigned to a new release track.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Note that these files should have already been uploaded — this build step will not do any uploading; it will only move existing app versions from one release track to another. To upload app files, use the "Upload Android AAB/APK to Google Play" post-build action.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          You can use wildcards like "**/build/outputs/*/*-release.apk".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          See the 'includes' attribute of Ant's FileSet for the exact format.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Note that multiple entries must be comma-separated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The base directory is the build's workspace. You can only reference AAB or APK files that are located in your workspace.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If no value is provided, the default is **/build/outputs/**/*.aab, **/build/outputs/**/*.apk. This field supports substituting environment variables in the form ${SOME_VARIABLE} or $SOME_VARIABLE at build time.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • fromVersionCode : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • googleCredentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specifies which credential to use in order to connect to Google Play.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The selected credential must be a "Google Service Account from private key" — if you have not added one already, refer to the documentation on this plugin's page.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          By choosing the "Parameter expression" option, you can also provide a credential at build time, either from an environment variable, or from a build parameter, e.g. the Credentials Parameter type.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          But you can use any type of expression, so long as it expands to the name of a "Google Service Account from private key" credential at build time. This field supports substituting environment variables in the form ${SOME_VARIABLE} at build time.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Note that variables in the form $SOME_VARIABLE are not accepted by the Credentials Plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • inAppUpdatePriority : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specifies the priority of this app release for the in-app update feature of the Google Play Core Library.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If you don't use this feature, or don't need to set a priority, you can leave this field blank; it will default to 0. Otherwise the value must be a whole number between 0 (lowest priority) and 5 (highest priority).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For more information on using in-app updates, see the documentation:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          https://developer.android.com/guide/playcore/in-app-updates This field supports substituting environment variables in the form ${SOME_VARIABLE} or $SOME_VARIABLE at build time.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • releaseName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The release name, used to identify this release in the Google Play Console UI. Not required to be unique among releases. If no value is entered, Google Play will set the release name to the versionName of the app file being moved. This field supports substituting environment variables in the form ${SOME_VARIABLE} or $SOME_VARIABLE at build time.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rolloutPercent : double (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rolloutPercentage : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The percentage of users in the given track to which the uploaded file(s) should be rolled out.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If you enter 100%, the app will be rolled out to all users, and the release will be considered complete, i.e. you will be unable to reduce the rollout percentage for this release.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If you enter 0%, a draft release will be created, meaning that users will not yet see it; the existing file(s) released in the given track, if any, will remain in place.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For more information on staged rollouts, see the Google Play documentation:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          https://support.google.com/googleplay/android-developer/answer/6346149 This field supports substituting environment variables in the form ${SOME_VARIABLE} or $SOME_VARIABLE at build time.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • trackName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Specifies the release track to which the given app file(s) will be re-assigned.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          You can enter the name of a custom track, or one of the built-in tracks:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • internal
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • alpha
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • beta
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • production
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For these tracks, you have the choice of rolling out the uploaded app files to all existing users immediately, or doing a staged rollout so that only a percentage of your existing userbase will be able to download the new version.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For more information on using the internal, alpha, beta or custom testing tracks, see the Google Play documentation:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          https://support.google.com/googleplay/android-developer/answer/3131213 This field supports substituting environment variables in the form ${SOME_VARIABLE} or $SOME_VARIABLE at build time.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • versionCodes : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          This specifies which version codes should be assigned to a new release track.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Note that multiple entries must be comma-separated. This field supports substituting environment variables in the form ${SOME_VARIABLE} or $SOME_VARIABLE at build time.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • addRelizaRelease
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • artId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • artType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • envSuffix : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • projectId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • status : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • uri : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useCommitList : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • version : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'RemoteBuildConfiguration'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • abortTriggeredJob : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • auth2 (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Using this parameter you can override the authentication used to connect to the selected remote Jenkins.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Don't Override
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The authentication configured in the (global) settings of the selected 'remote host' is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Token Authentication
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The specified user id and Jenkins API token is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Credentials Authentication
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The specified Jenkins Credentials are used. This can be either user/password or user/API Token.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • No Authentication
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            No Authorization header will be sent, independent of the global 'remote host' settings.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Bearer Authentication
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The bearer token is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Note: Jenkins API Tokens are recommended since, if stolen, they allow access only to a specific Jenkins while user and password typically provide access to many systems.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • BearerTokenAuth
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • token (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • CredentialsAuth
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentials : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • NoneAuth
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • NullAuth
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • TokenAuth
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • apiToken (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • userName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • blockBuildUntilComplete : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • disabled : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Set this field to disable the job step instead of removing it from job configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • enhancedLogging : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Enable Enhanced Logging
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If this option is enabled, the console output of the remote job is also logged.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • httpGetReadTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • httpPostReadTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • job : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Remote Job Name or full URL.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The name or URL of the job on the remote Jenkins host which you would like to trigger. If the full job URL is specified the URL of the remote Jenkins host configured above will be ignored.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • maxConn : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The max concurrent connections to the remote host, default is 1, max is 5. It'll be 5 even if you set it greater than 5. Note: Set this field with caution, too many concurrent requests will not only fail your local jobs,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              but also block the remote server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • overrideTrustAllCertificates : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • parameters : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • parameters2 (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Job Parameters
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Parameters which will be used when triggering the remote job.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If no parameters are needed, then just leave this blank.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Map parameters
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                This is the recommended type. It allows you to provide parameters with key/value and supports multi-line parameters.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • String parameters (legacy)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                This type allows to describe parameters within a big string like in versions 3.1.5 and lower. It does not support multi-line parameters.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • File parameters (legacy)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                This type allows to describe parameters within a file like in versions 3.1.5 and lower. It does not support multi-line parameters.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • FileParameters
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • filePath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • MapParameters
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • parameters (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • value : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • StringParameters
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • parameters : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • pollInterval : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • preventRemoteBuildQueue : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • remoteJenkinsName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • remoteJenkinsUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              It is possible to override the Remote Jenkins URL for each Job separately.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • shouldNotFailBuild : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Do Not Fail If Remote Fails
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If this option is enabled, the build will not fail even if the remote build fails.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • token : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Remote Job Token
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Security token which is defined on the job of the remote Jenkins host.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If no job token is needed to trigger this job, then just leave it blank
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • trustAllCertificates : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Trust all certificates

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              It is possible to override/rewrite the 'Trust all certificate'-setting for each Job separately. Setting this checkbox to 'true' will result in accepting all certificates for the given Job.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If your remote Jenkins host has a self-signed certificate or its certificate is not trusted, you may want to enable this option. It will accept untrusted certificates for the given host.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This is unsafe and should only be used for testing or if you trust the host.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • useCrumbCache : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Set this field to enable cache of the crumb of remote server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              It'll be more efficient for the local job execution & more stable for remote server when massive concurrent jobs are triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This cache will be cleared every 10 minutes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • useJobInfoCache : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Set this field to enable cache of the job info of remote server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              It'll be more efficient for the local job execution & more stable for remote server when massive concurrent jobs are triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This cache will be cleared every 10 minutes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • crxReplicate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Asynchronously replicate CRX Content Packages from one-or-more configured Adobe Granite repositories to wherever their replication agents may take them. This is probably not the most deterministic way to install packages on publish servers, so prefer using the "Deploy Content Packages" step if possible.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • packageIds : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify a list of package IDs to replicate from each specified Base URL. Each package ID string must occupy its own line.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A Package ID consists of the group, the name, and the version of a package, separated by colons (':'), as in: "group:name:version".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This field supports parameter tokens.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • baseUrls : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify the base URL of the Adobe Granite server, including hostname and port. The CRX Package Manager service path will be appended to this value for all requests. For example, http://localhost:4502 or https://author.mycorp.com, etc.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Multiple urls can be specified, one per line. All specified packages will be replicated from one server before beginning replications from the next one.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If login credentials for one of the servers are different than those configured in the Connection Options section, you may override them in the Base URL by inserting username[:password]@ between the scheme and the hostname.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              For example, to override the Username without changing the associated password or private key, you may use the following form:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              http://deployer@localhost:4502

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              To override the credentials completely, provide a username and password (which may be provided by an encrypted parameter) by separating them with a colon, as shown below:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              http://deployer:Password123@localhost:4502

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This field supports parameter tokens.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Select the login credentials with which content packages will be replicated from the CRX server.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              [Signature] credentials may be used if the target server supports HTTP Signature Authentication using the keyId format, /$username/keys/$fingerprint.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Select "-none-" to use the default credentials set in the global CRX Content Package Deployer - HTTP Client configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • ignoreErrors : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Check this box to ignore errors during replication such that the build continues after completion of this step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • requestTimeout : long (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify the timeout in milliseconds to wait for a response for each individual request. Specify a value of 0 to use default behavior.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • serviceTimeout : long (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify the timeout in milliseconds to wait for PackageManager service availability between sending POST requests. Specify a value of 0 to use default behavior.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • waitDelay : long (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify a delay in milliseconds before calls to check for Package Manager service availability. Increase this value if a /crx/packmgr node is sometimes created in the repository by this step, indicating that the Package Manager servlet was brought down for bundle installation AFTER a successful check for service availability, but BEFORE the next POST request was sent. What happens is that the SlingPostServlet takes over when the crx-packagemgr bundle is refreshed and creates nodes for any POST requests that it handles. Increasing this delay gives more time for the bundle refresh process to begin on the server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • acmRepoSync
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • force : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ReqtifyGenerateReport'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Creation of a report. The plugin will find a .rqtf file in the workspace and make a report. You can choose:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • The name of report
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • The model of report
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • The template of report
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • reportArgumentList : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • nameReport : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • modelReport : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • templateReport : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'RetrieveArtifactsBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • names (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • name : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • stage : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • variableName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • publishReview
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • downloadOnly : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • installRBTools : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'ReviewboardApplyPatch'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Should be used with Reviewboard Url Parameter and should be a pre-build step. If auto-apply patch is disabled in plugin configuration, this will invoke the default diff4j patch application. If auto-apply is on (default) - nothing will happen.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ReviewboardPollingBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • reviewbotJobName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • checkBackPeriod : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • reviewbotRepoId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • restrictByUser : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • disableAdvanceNotice : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'RigorBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Please select a credential of Kind Rigor API Key here.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Note: Your Rigor Optimization API key can be found on the API Credentials settings page in the Rigor Optimization application. The API key must have User or higher level permissions.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • performanceTestIds : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  List 1 or more test IDs (as a comma separated list) of Rigor Optimization Performance Tests to be run during this step. You can locate the performance test ID by hovering over the Info (i) icon on any performance test in the View Results page of your Rigor Optimization account.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If Fail build based on results is checked below, this step will wait until all tests complete before proceeding. If unchecked, this step will launch these tests, but not wait for them to complete.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • failOnSnapshotError : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If checked, the build will be marked as failed if there are any errors running your configured performance tests. If unchecked, any errors creating tests will be treated as warnings and not fail the build.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • failOnResults : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If checked, the build will wait for your configured tests to complete (may take 30 seconds to a few minutes) and pass/fail based on the results configured below. If unchecked, your configured tests will run, but the build will not wait for the tests to complete nor fail this step based on any results (useful for historical change logging of your site in the Rigor Optimization application).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • performanceScore : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Optional

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Fail the build if any test reports an overall performance score lower than this value (1-100)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • criticalNumber : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Optional

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Fail the build if any test has more than this # of critical first party content defects found.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Note: You can customize when critical defects occur by customizing your Defect Check Policy. Learn more in this article.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • foundDefectIds : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Optional

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Fail the build if any of the listed defect IDs (comma separated) are found for any first party content items in any configured test.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Note: You can locate any defect ID at the top of any defect detail page in your results, or in the Knowledge Base. See Example.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • enforcePerformanceBudgets : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Optional

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Fail the build if any test exceeds its performance budgets

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • totalContentSize : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • totalFoundItems : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testTimeoutSeconds : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Timeout in seconds to wait for all configured performance tests to complete. Defaults to 300 seconds (5 minutes).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This value is only used if Fail build based on test results is enabled.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • snRollbackApp
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  User name and password defined in global credentials (credentials ID is required here) used for the instance where the application is installed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • apiVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Optional. Version of the endpoint to access. For example, v1 or v2. Only specify this value to use an endpoint version other than the latest.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • appScope : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Required if application system ID is not specified. The scope name of the application for which to apply the changes, such as x_aah_custom_app. You can locate this value in the scope field in the Custom Application [sys_app] table.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • appSysId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Required if application scope is not specified. The system id of the application for which to apply the changes. You can locate this value in the Sys ID field in the Custom Application [sys_app] table.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • rollbackAppVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Expected rollback version. This version is compared to the version that is included in the last rollback context, if they don't match, the build step fails.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If empty, installed version from previous step will be taken.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • url : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ServiceNow instance url where the application was installed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'RollbackBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • changeLogFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • changeLogParameters : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • contexts : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Liquibase contexts to execute under.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • installationName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • labels : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Liquibase labels to execute
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • liquibasePropertiesPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  A liquibase.properties file can be used for default values. Any of the below settings will override what is in this file. This file should be relative to a directory listed in the "Resource directories" section.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • numberOfChangesetsToRollback : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • password : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • resourceDirectories : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Leave blank for workspace root. May be relative to workspace or an absolute path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • rollbackLastHours : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • rollbackToDate : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • rollbackToTag : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • rollbackType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • url : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  example: jdbc:mysql://localhost:3306/sampledb. The JDBC driver must be available in the "lib" directory of your Liquibase installation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • username : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • snRollbackPlugin
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  User name and password defined in global credentials (credentials ID is required here).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This field cannot be empty. It doesn't use global settings from ServiceNow Parameters.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • apiVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Optional. Version of the endpoint to access. For example, v1 or v2. Only specify this value to use an endpoint version other than the latest.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • pluginId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Unique identifier of the plugin. You can locate this identifier on the Plugins page within the card of the desired plugin; identified with the name "ID".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • url : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ServiceNow instance url. This field cannot be empty. It doesn't use global settings from ServiceNow Parameters.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'RqmBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • collectionStrategy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Select an operating mode for fetching test cases in RQM. Currently only the operating mode to find test cases based on a Test Suite Execution Record is available
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'RqmTestSuiteExectionRecordCollectionStrategy'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • executionRecordName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify the name of the test suite excution record to look for.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • planName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      TODO supply a title
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      TODO write content
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • projectName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The RQM Project area the test suite execution record is found in.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • iterativeTestCaseBuilders : Array / List of Build Step (hudson.tasks.BuildStep)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For each test case found. Execute the buildsteps added here. Injecting environment variables as we go.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • preBuildSteps : Array / List of Build Step (hudson.tasks.BuildStep)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Run this right before the iterative build steps starts executing.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • postBuildSteps : Array / List of Build Step (hudson.tasks.BuildStep)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Run this right after the iterative build steps have been executed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'RubyMotionBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • platform : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • rakeTask : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • outputStyle : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • outputFileName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • useBundler : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • installCocoaPods : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • needClean : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • outputResult : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • deviceName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • simulatorVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • envVars : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'RunApplicationAction'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • applicationName : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Application selection is mandatory

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Select an existing Application in Calm or the ones provisioned in Nutanix Calm Blueprint Launch Steps.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • actionName : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Application Action selection is mandatory

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • runtimeVariables : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Click on Fetch Runtime Variables to fetch all editable variables for the selected Action in JSON format. Modify the key values from the defaults as needed.The values can also reference jenkins environment variables.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • runFromAlmBuilder
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almServerName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almCredentialsScope : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Select the scope of the credentials used for connecting to the specified ALM Server:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Job (local) credentials: This option requires to provide the credentials right here at job level.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • System (global) credentials: This option allows the selection of UserName or ClientID from a dropdown list with global credentials.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almUserName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almPassword : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almDomain : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almProject : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almTestSets : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  List of test sets to run. Each line contains a path to a test set or a test set folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example: Root\subFolder1\subFolder2\testSetToRun .
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  In case you want to parameterize the tests please specify the parameters and their values like:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Root\subFolder1\subFolder2\testSetToRun "Parameter1":"&ltstringvalue>",..., "ParameterN":&ltnumbervalue>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Also, for better specification of parameters you may use the "Specify test parameters" section below.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almRunResultsMode : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almTimeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Number of seconds before timeout. If left empty timeout is unlimited.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almRunMode : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Defines how the test set is executed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Run locally: The test set is run on the machine that performs the build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Run remotely: The test set is run on the host defined in the Testing Tool host field.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • Run on planned host: The test set is run on the host defined in ALM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almRunHost : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If the Run mode field is set to Run remotely, use this field to specify the name of the host that runs the test set.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almClientID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almApiKey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • isSSOEnabled : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Obtain the Client ID and API key secret from your ALM site administrator.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • areParametersEnabled : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • specifyParametersModel
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • parameterJson : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • isFilterTestsEnabled : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • filterTestsModel (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • blockedCheckbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • failedCheckbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • notCompletedCheckbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • noRunCheckbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • passedCheckbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • testName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • almServerSettingsModel (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • almServerName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • almServerUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • almCredentials
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • almUsername : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • almPassword : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • almSSOCredentials
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • almClientID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • almApiKeySecret : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • runFromCodelessBuilder
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • runFromFSBuilder
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fsTests : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    List of tests or folders that contain tests, to run. Each line should contain a single test, folder, or MTB file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    In case you want to parameterize the tests please specify the parameters and their values like:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    &ltTestPath> "Parameter1":"&ltstringvalue>",..., "ParameterN":&ltnumbervalue>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Also, for better specification of parameters you may use the "Specify test parameters" section below.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • areParametersEnabled : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • specifyParametersModel
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • parameterJson : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fileSystemTestSetModel
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fileSystemTestSet
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      File system test set help.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tests : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        List of tests or folders that contain tests, to run. Each line should contain a single test, folder, or MTB file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • parallelRunnerEnvironments
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • environment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Environment help string.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • environmentType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • summaryDataLogModel
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • logVusersStates : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Display the number of virtual users in each state.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • logErrorCount : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Display the number of controller errors.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • logTransactionStatistics : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Display the number of passed transactions, failed transactions and hits per second.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pollingInterval : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The rate at which the messages are displayed (in seconds). Default value is 10 seconds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • scriptRTSSetModel
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • scripts
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • scriptName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The script name is found in Controller's Script Information dialog (Percentage Mode scenario) or Group Information dialog (Vuser Group Mode scenario).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • additionalAttributes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • description : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • isParallelRunnerEnabled : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Note: This mode is for UFT GUI test only.With it enabled, you can define multiple tests and the environments to run with.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    UFT will run on those environments in parallel(at most 4 environments simultaneously) for each test.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Disabling this option will switch back to the normal view with the tests kept.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • uftSettingsModel (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • selectedNode : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Please select the corresponding slave machine setup in the main job configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • numberOfReruns : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Defines the maximum amount of test set reruns.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cleanupTest : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Test executed before the re-run process of the failed tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • onCheckFailedTest : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fsTestType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select which test category will run again when build fails. The user can rerun the entire set of tests or only the failed tests from the suite. If just certain tests fail, then only the selected tests will rerun.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • rerunSettingsModels (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • test : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • checked : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • numberOfReruns : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • cleanupTest : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • analysisTemplate : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Apply a template for the build (path to a .tem file). Leave blank in order to use the default template.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • authModel (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • mcUserName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • mcPassword : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • mcTenantId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • mcExecToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • controllerPollingInterval : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Polling interval for checking the scenario status, in seconds. The default is 30 seconds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • displayController : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Display the controller while the scenario is running.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fsAutActions : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fsDeviceId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fsDevicesMetrics : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fsExtraApps : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fsInstrumented : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fsJobId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fsLaunchAppName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fsManufacturerAndModel : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fsOs : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fsReportPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The directory where the test results will be saved. If this is left empty the default directory will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fsTargetLab : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fsTimeout : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Timeout value in seconds. If left empty, there is no timeout.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fsUftRunMode : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ignoreErrorStrings : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Ignore errors during the scenario run containing any of the strings listed below. For example: "Error: CPU usage for this load generator has exceeded 80%"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • mcServerName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The Mobile Center host address.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • outEncoding : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The encoding charset to be used when printing the text in the Console Output. The field is optional and the default value is UTF-8. The type UTF-16 is equivalent to Unicode.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • perScenarioTimeOut : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The maximum time allotted for scenario execution, in minutes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • proxySettings (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fsUseAuthentication : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fsProxyAddress : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fsProxyUserName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fsProxyPassword : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • resultFileNames (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Type: java.util.Map<java.lang.Long, java.lang.String>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • useSSL : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'RunInCloudBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • projectId : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The Bitbar Cloud project in which to start the new test run.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • appPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • testPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • dataPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • testRunName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • scheduler : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • testRunner : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • deviceGroupId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • language : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • screenshotsDirectory : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • keyValuePairs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • withAnnotation : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • withoutAnnotation : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • testCasesSelect : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • testCasesValue : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • failBuildIfThisStepFailed : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • virusScanTimeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • waitForResultsBlock
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • testRunStateCheckMethod (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Values: HOOK_URL, API_CALL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • downloadScreenshots : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • forceFinishAfterBreak : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • hookURL : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • resultsPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • waitForResultsTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • testTimeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • cloudUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • cloudUIUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • frameworkId : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • osType
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Values: IOS, ANDROID, DESKTOP, UNDEFINED
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tpJobRun
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • projectId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • jobId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • agentId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • waitJobFinishSeconds : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • executionParameters : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • junitResultsFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • osfBuilderSuiteForSFCCRunJob
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • hostname : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ocCredentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ocVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • jobName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • jobArguments (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • waitForJobToFinish : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'RunLoadRunnerScript'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • scriptsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'RunMatlabCommandBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • matlabCommand : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Insert the MATLAB commands you want to execute in the Command box. If you need to specify more than one command, use a comma or semicolon to separate the commands.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Example: results = runtests, assertSuccess(results);

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If you need to specify several MATLAB commands, consider writing a MATLAB script or function and executing this script or function instead. (To run a script or function, do not specify the file extension.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Example: myscript

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Note:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • The build fails if the execution of any command results in an error.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • If the build uses a MATLAB version prior to R2020a, MATLAB might display non-ASCII characters, specified in the Command box, as garbled text. If you specify non-ASCII characters in your commands, consider running your commands as a .m or .mlx file created in the same locale that MATLAB uses on the build agent
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'RunMatlabTestsBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • coberturaArtifact (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Generate a code coverage report in Cobertura XML format. By default, MATLAB names the artifact cobertura.xml and stores it in the matlabTestArtifacts folder of the project workspace. To override the default artifact name and location, specify a path relative to the project folder in the File path box. If the text box is empty, MATLAB does not generate an artifact.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • coberturaReportFilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • junitArtifact (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Generate a test report in JUnit XML format. By default, MATLAB names the artifact junittestresults.xml and stores it in the matlabTestArtifacts folder of the project workspace. To override the default artifact name and location, specify a path relative to the project folder in the File path box. If the text box is empty, MATLAB does not generate an artifact.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • junitReportFilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • modelCoverageArtifact (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Generate a model coverage report in Cobertura XML format. This artifact includes coverage results for Simulink® models that are tested using Simulink Test™. By default, MATLAB names the artifact coberturamodelcoverage.xml and stores it in the matlabTestArtifacts folder of the project workspace.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Note: This feature requires a Simulink Coverage™ license and is supported only in MATLAB R2018b or a newer release.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • modelCoverageFilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • pdfReportArtifact (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Generate a test report in PDF format. By default, MATLAB names the artifact testreport.pdf and stores it in the matlabTestArtifacts folder of the project workspace. To override the default artifact name and location, specify a path relative to the project folder in the File path box. If the text box is empty, MATLAB does not generate an artifact.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Due to Jenkins Content Security Policy rules, the generated report might not open properly from within the Jenkins workspace. Consider copying the report to a location outside the workspace and opening it from there. For more information, see Configuring Jenkins Content Security Policy.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Note: On macOS platforms, this feature is supported in MATLAB R2020b and later.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pdfReportFilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • selectByFolder (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Specify the location of folders used to select test suite elements, relative to the project root folder. To generate a test suite, the plugin uses only the tests in the specified folders and their subfolders.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Paste the test folder path in the text box. To add more folders, click Add folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • testFolderPaths
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testFolders : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • selectByTag (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Specify the test tag used to select test suite elements. To generate a suite, the plugin uses only the test elements with the specified tag.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • testTag : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • sourceFolder (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Specify the location of folders containing source code, relative to the project root folder. The specified folders and their subfolders are added to the top of the MATLAB search path. To generate a coverage report, MATLAB uses only the source code in the specified folders and their subfolders.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Paste the source folder path in the Folder path box. To add more folders, click Add folder.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • sourceFolderPaths
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • srcFolderPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • stmResultsArtifact (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Export Simulink Test™ Manager results in MLDATX format. By default, MATLAB names the artifact simulinktestresults.mldatx and stores it in the matlabTestArtifacts folder of the project workspace. To override the default artifact name and location, specify a path relative to the project folder in the File path box. If the text box is empty, MATLAB does not generate an artifact.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Note: This feature requires a Simulink Test license and is supported only in MATLAB R2019a or a newer release.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • stmResultsFilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • tapArtifact (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Generate a test report in TAP format. By default, MATLAB names the artifact taptestresults.tap and stores it in the matlabTestArtifacts folder of the project workspace. To override the default artifact name and location, specify a path relative to the project folder in the File path box. If the text box is empty, MATLAB does not generate an artifact.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • tapReportFilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'RunPcTestBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • almPassword : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    HP ALM user's password. If set, this value overrides the value from Bumblebee Global Configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If empty, value from Bumblebee Global Configuration will be used
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • almUser : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    HP ALM user. If set, this value overrides the value from Bumblebee Global Configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If empty, value from Bumblebee Global Configuration will be used
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • domain : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    HP ALM Domain.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • failIfTaskFails : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If task shall fail the build in case it fails.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • outputDir : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Directory where Performance Center reports will be placed. Relative to the workspace root. If it does not exist, it will be created.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • pollingInterval : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Test status polling interval in seconds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • postRunActionString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Performance Center Post Run Action.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • project : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    HP ALM Project name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • retryCollateAndAnalysisAttempts : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Defines how many times it will retry Collate or Analyze phase if they failed, before task completely fails.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • retryCollateAndAnalysisFlag : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • retryCollateAndAnalysisInterval : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Number of seconds to wait between retry attempts.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • retryCount : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Number of retry attempts, before task completely fails.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • retryInterval : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Number of seconds to wait between retry attempts.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • retryIntervalMultiplier : double (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Increase factor for retry interval. E.g. if it is set to 2, then each subsequent wait interval between attempts will be twice bigger than the previous one.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • testLabPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Path to a test set in HP ALM TestLab. Must start with Root\, e.g. Root\folder1\testSet1, where Root\folder1 is a path to test lab folder and testSet1 is the name of a test set. Test set will be created if it does not exist.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • testPlanPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Path to a test in HP ALM TestPlan. Must start with Subject\, e.g. Subject\folder1\test1, where Subject\folder1 is a path to test folder and test1 is the name of a test.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • timeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The number of minutes to wait for the Performance Center test to finish. 0 means wait indefinitely.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • timeslotDuration : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Time Slot Duration in minutes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • vudsMode : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If true, the test consumes Virtual User Day (VUD) licenses.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • runPromotion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • artifact : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • artifactType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • keepTargetResources : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • keepTargetRunProfiles : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • plan : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • promotion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • task : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • workspace : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • runTask
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • environment : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • parameters : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • task : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • workspace : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tpTestRun
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • junitResultsFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • waitTestFinishSeconds : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • projectId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • testId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • agentId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • browser : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • device : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • executionParameters : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'RunTestSetBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • domain : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    HP ALM Domain
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • project : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    HP ALM Project name
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • runMode : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Where to run test sets: locally, on scheduled host or remotely
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • host : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Host on which test sets will be executed
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • testSets : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    A list of test set paths to be executed. Each test set starts from a new line. Example: Root\Release\2.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • outputDirPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Path to the directory where to put JUnit-like execution results. Basedir of the fileset is the workspace root. If directory does not exist, it will be created
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • timeOut : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The number of minutes to wait for test sets execution. 0 means wait indefinitely
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • snRunTestSuite
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    User name and password defined in global credentials (credentials ID is required here) used for the instance where the application will be installed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • apiVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Optional. Version of the endpoint to access. For example, v1 or v2. Only specify this value to use an endpoint version other than the latest.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • browserName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Name of the browser to use to run the client test. This value must match what is specified in the scheduled client test runner. For additional information on scheduled client test runners, see Scheduled Client Test Runners.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Valid values:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Any
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Chrome
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Firefox
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Edge
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • IE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Safari
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • browserVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Starting value of the version of the browser specified in browser_name to use to run the test. For example, if you enter "9", that would enable all 9.x.x.x versions. This value must match what is specified in the scheduled client test runner.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • osName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Name of the operating system under which to run the test suite. This value must match what is specified in the scheduled client test runner.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • osVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Starting value of the version of the operating system under which to run the test suite. For example, if you enter "8", that would enable all 8.x.x.x versions. This value must match what is specified in the scheduled client test. runner.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • responseBodyFormat : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • testSuiteName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Required if Test suite sys_id is not specified. The name of the test suite to run. This value is located in the Test [sys_atf_test_suite] table.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • testSuiteSysId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Required if Test suite name is not specified. The sys_id of the test suite to run. This value is located in the Test [sys_atf_test_suite] table.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • url : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    ServiceNow instance url where the application will be installed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • withResults : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If the checkbox is checked, then results from ServiceNow will be visible in Output Console, together with the link to the visualization on the NOW platform.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'RunUftTestBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • testPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Path to a test folder or test batch file (.mtb) which shall be executed
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • outputDirPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Path to the directory where to put JUnit-like execution results. Basedir of the fileset is the workspace root. If directory does not exist, it will be created
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'RunscopeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • triggerEndPoint : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Enter the Trigger URL for the test that you want to run on this build step. To obtain the Trigger URL for a test, from the list of Runscope API tests, select the desired test. Next, click on Settings on the left navigation pane. On the test settings, locate and copy the Trigger URL and then paste into this field.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    If you need to pass any Custom Initial Variables (i.e. baseUrl=https://yourapihere.com&apiKey=abc123) or Reserved Trigger URL Parameters (i.e. runscope_region=eu2), append those to the end of your Trigger URL (followed by a quetion mark) as query string parameters. The full documentation for Trigger URLs can be found here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • accessToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Enter your OAuth Personal Access Token. A personal access token is generated when you create a new Runscope application. This makes it easy to use the API without building a web flow. We suggest that you create a unique application (which generates a personal access token) that is used exclusively for this Runscope/Jenkins integration.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    To obtain a new personal access token, create a new Runscope application by visiting this link. For Website and Callback URL values, just enter in any valid URL (i.e. http://localhost). The URLs will not be called. After creating the new application, copy the access token provided into your clipboard then paste the token into this field.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • timeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Enter timeout in seconds for test run to complete. After the test is triggered, this plugin will repeatedly poll the Runscope API (approx. every second) for the test run result. If the time it takes to complete the test exceeds this timeout value, this build step will abort and fail.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • s3CopyArtifact
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • projectName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • buildSelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • downstream
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • upstreamProjectName : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Downstream builds are found using fingerprints of files. That is, a build that is triggered from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Note: "Downstream build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        AbstractProject based projects:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Freestyle projects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Multi-configuration projects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Maven projects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Non AbstractProject based projects:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Pipeline jobs (aka. Workflow jobs)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • upstreamBuildNumber : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • lastWithArtifacts
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • lastCompleted
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'MultiJobBuildSelector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • buildParameter
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • parameterName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the "build selector" parameter. A parameter with this name should be added in the build parameters section above. There is a special parameter type for choosing the build selector.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              You can pass not only the parameter name, but also the parameter value itself. This is useful especially used with workflow-plugin.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • permalink
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • id : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'PromotedBuildSelector'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • level : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • latestSavedBuild
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • specific
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • buildNumber : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                While this selector is for build numbers (e.g. "22" for build #22), you can also resolve build parameters or environment variables (e.g. "${PARAM}"). The display name of a build and permalinks (e.g. "lastSuccessfulBuild", "lastBuild"...) can be used as well.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • lastSuccessful
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • stable : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • upstream
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • allowUpstreamDependencies : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fallbackToLastSuccessful : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • upstreamFilterStrategy (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Jenkins launches only one build when multiple upstreams triggered the same project at the same time. This field specifies from which upstream build to copy artifacts in those cases. "Use the oldest" copies artifacts from the upstream build with the smallest build number (that is, oldest). "Use the newest" copies artifacts from the upstream build with the largest build number (that is, newest). The default value is "Use global setting", which behaves as configured in "Manage Jenkins" > "Configure System".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Values: UseGlobalSetting, UseOldest, UseNewest
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • workspace
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • filter : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • excludeFilter : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • target : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • flatten : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • optional : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SASUnitPlugInBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This is the Jenkins Plug-In for SASUnit the unit testing framework for SAS.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • sasunitBatch : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Please enter the relative path to the batch file to start the SASUnit test framework.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • doxygenBatch : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Please enter the relative path to the executable to create the doxygen report

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • sasunitVersion : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Please pick a SASUnit installation that shall be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              To add an installation please go to Jenins->Manage Jenkins->Setting or follow this link.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • createDoxygenDocu : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              In addition to SASUnit a Doxygen documentation can be created as well
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SBuild'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • sbuildVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • targets : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildFiles : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • options : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • scmSkip
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • deleteBuild : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • skipPattern : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SConsBuilderCommand'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For projects that use SCons as the build system. This causes Jenkins to invoke SCons with the given targets, variables and options. Any non-zero exit code causes Hudson to mark the build as a failure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The command synopsis is scons [ options] [ name=val... ] [ targets]
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • sconsName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • options : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify the scons options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • variables : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify the scons variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • targets : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify a list of scons targets to be invoked, or leave it empty to invoke the default scons target specified in the scons script.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • rootSconsscriptDirectory : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Root Sconscript directory, i.e -C rootDirectory; this option can be used to use build files in a subdirectory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • commandScript : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify the content of the SCons script. A generated Sconstruct will be generated and inked.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SConsBuilderScriptFile'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For projects that use SCons as the build system. This causes Jenkins to invoke SCons with the given targets, variables and options. Any non-zero exit code causes Hudson to mark the build as a failure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The command synopsis is scons [ options] [ name=val... ] [ targets]
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            scons searches for a file named SConstruct, Sconstruct, or sconstruct (in that order) in the current directory and reads its configuration from the first file found.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • sconsName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • options : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify the scons options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • variables : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify the scons variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • targets : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify a list of scons targets to be invoked, or leave it empty to invoke the default scons target specified in the scons script.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • rootSconsscriptDirectory : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Root Sconscript directory, i.e -C rootDirectory; this option can be used to use build files in a subdirectory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • sconsscript : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If your build requires a custom file -f newSconscript, specify it here. By default, scons searches for a file named SConstruct, Sconstruct, or sconstruct (in that order) in the root directory; this option can be used to use build files with a different name
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SMABuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • validateEnabled : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Indicate whether you would like to perform a test deployment only.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • username : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The Salesforce user that will perform the deployment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • password : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The password for the user you provided above.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • securityToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The security token for the user.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              You can leave this field blank if you do not use security tokens in your organization.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • serverType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The instance type of Salesforce that you are deploying against.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • testLevel : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The test level you wish to perform this deployment at.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              - None: No tests will be run during this deployment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              - Relevant: the RunSpecifiedTests level. Jenkins will use the information provided in the Run Test Regex field under the System Configuration section to determine which set of tests need to be run for this particular deployment. A warning will be generated in Jenkins log if no relevant test is found for a particular ApexClass.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              - Local: All unit tests are run, excluding those found in managed packages.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              - All: All unit tests are run, including those found in managed packages.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • prTargetBranch : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If this job is configured to deploy or validate pull requests, specify what the target branch will be (e.g. "develop").

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              SMA will use this information to generate the appropriate delta as pull requests must be handled differently.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SQLPlusRunnerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • user : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Inform schema user information (example: SCOTT) or schema user and password (example: SCOTT/TIGER). You can use global variable like ${USER}.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • password : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • instance : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Inform instance information (example: ORCL). You can use global variable like ${INSTANCE}.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • scriptType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • script : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This is the name of SQL script, expected at src/main/resources folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              update.sql or sql/update.sql
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • scriptContent : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This is a custom SQL script.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               SELECT sysdate from dual; 
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               show user; 

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • customNLSLang : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              NLS_LANG is an environment variable used to define language, territory and character set properties. Example: AMERICAN_AMERICA.US7ASCII or FRENCH_CANADA.WE8ISO8859P1 Source: ORAFAQ
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • customOracleHome : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Using custom ORACLE_HOME will override global ORACLE_HOME. Leave this field blank to use global ORACLE_HOME. ORACLE_HOME refers to either a directory where the Oracle software is installed or an environment variable pointing to the directory where the Oracle software is installed. Source: ORAFAQ
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • customSQLPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              SQLPATH contains the name of your directory for your SQL script collection. Example: c:\u01\app\sql_scripts or /oracle/app/sql Source: DBA Oracle
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • customSQLPlusHome : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Using custom SQL*Plus will help find SQL*Plus executable file, this helps if you are working with Jenkins slave machines. Example: C:\Oracle\App\Server\Oracle\bin\sqlplus.exe or /oracle/app/oracle/product/12.1.0/dbhome_1/bin/sqlplus Learn more about distributed builds
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • customTNSAdmin : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Using custom TNS_ADMIN refers to a directory where the Oracle SQL*Net configuration files (like sqlnet.ora and tnsnames.ora) are located. Example: C:\Oracle\App\Server\Oracle\network\admin or /oracle/app/oracle/product/12.1.0/dbhome_1/network/admin Source: ORAFAQ
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SSHBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • siteName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • execEachLine : boolean

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Execute each line in the script individually.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              By default, all of the commands are concatenated into a single "command" issued over a single SSH exec channel. Selecting this option causes each line to be executed over it's own SSH exec channel, each of which is part of the same session.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This is useful in certain cases where the commands cannot be concatenated into a single script executed at one time, for example, when issuing commands using the sourceforge.net shell.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If unsure, leave this box unchecked.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • hideCommand : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SaltAPIBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • authtype : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • clientInterface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • hook
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • post : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Publish JSON object as 'post' data, see upstream documentation. . Paramaterized Build variables should be specified in the format {{VARNAME}}.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • tag : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify salt event tag for message. The event tag is prefixed with salt/netapi/hook, see upstream documentation. Paramaterized variables should be specified in the format {{VARNAME}}.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • batch
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • function : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify salt function such as test.ping or cmd.run. Paramaterized Build variables should be specified in the format {{VARNAME}}.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • arguments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify salt function arguments space separated. Paramaterized Build variables should be specified in the format {{VARNAME}}. Python lists should be quoted: pkgs="[package1, package2]".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Pillar values should be passed in as an argument, with the pillar string surrounded in double or single quotes, and the values single or double quoted: "pillar={artifact: 'somevalue3', repo: 'othervalue:4'}"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • batchSize : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify salt batch size. Example: 10 or 10%
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • batchWait : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Optionally specify time to wait between batches of minions.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • target : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify salt target as defined in the salt documentation. Paramaterized Build variables should be specified in the format {{VARNAME}}.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • targettype : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • local
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • function : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify salt function such as test.ping or cmd.run. Paramaterized Build variables should be specified in the format {{VARNAME}}.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • arguments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify salt function arguments space separated. Paramaterized Build variables should be specified in the format {{VARNAME}}. Python lists should be quoted: pkgs="[package1, package2]".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Pillar values should be passed in as an argument, with the pillar string surrounded in double or single quotes, and the values single or double quoted: "pillar={artifact: 'somevalue3', repo: 'othervalue:4'}"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • target : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify salt target as defined in the salt documentation. Paramaterized Build variables should be specified in the format {{VARNAME}}.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • targettype : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • blockbuild : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • jobPollTime : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • minionTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • subset
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • function : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify salt function such as test.ping or cmd.run. Paramaterized Build variables should be specified in the format {{VARNAME}}.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • arguments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify salt function arguments space separated. Paramaterized Build variables should be specified in the format {{VARNAME}}. Python lists should be quoted: pkgs="[package1, package2]".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Pillar values should be passed in as an argument, with the pillar string surrounded in double or single quotes, and the values single or double quoted: "pillar={artifact: 'somevalue3', repo: 'othervalue:4'}"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • subset : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Execute the routine on a random subset of the targeted minions. Paramaterized variables should be specified in the format {{VARNAME}}.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • target : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify salt target as defined in the salt documentation. Paramaterized Build variables should be specified in the format {{VARNAME}}.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • targettype : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • runner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • function : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify salt function such as test.ping or cmd.run. Paramaterized Build variables should be specified in the format {{VARNAME}}.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • arguments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify salt function arguments space separated. Paramaterized Build variables should be specified in the format {{VARNAME}}. Python lists should be quoted: pkgs="[package1, package2]".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • mods : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify runner mods value. Used in state.orchestrate function to specify the name of the orchestrate module
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Paramaterized Build variables should be specified in the format {{VARNAME}}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • pillarvalue : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify runner pillar value. Used in state.orchestrate functions. Ex: {"key": "value"}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Paramaterized Build variables should be specified in the format {{VARNAME}}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • servername : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Salt servername. In the form: https://host.domain:8000
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The Test Connection process is run from the Jenkins master. If the build is localized to an agent, and the servername is specific to that agent, then Test Connection will likely fail, while the actual build may succeed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • saveEnvVar : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • saveFile : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • skipValidation : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SbtPluginBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • jvmFlags : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • sbtFlags : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Add flags to SBT launcher. One recommended (and default) flag is the -Dsbt.log.noformat=true flag which keeps the SBT output clean.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • actions : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • subdirPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Subdirectory path relative to workspace to run sbt in.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ScanBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • scanURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • apiKey
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • source : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • exclude : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • rule : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • timeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • isAbortBuild : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • isPrivateScan : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • isShowBlockedOnly : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • isCreateLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ScriptBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildStepId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • defineArgs : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildStepArgs
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • arg : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • tokenized : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Decomposes the given value of each argument into multiple arguments by splitting at whitespaces.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ScriptBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • scriptFilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Required parameter. File path to the build script.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Optional parameter. Credentials to a Turbo account which will be used to execute the build script.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • hubUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Optional parameter. The hub server to use. Example: https://turbo.net.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • imageName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Optional parameter. Name of the image.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • vmVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Optional parameter. The Turbo VM version to run the container with.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • containerWorkingDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Optional parameter. Initial working directory inside the container.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • mountSettings
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • sourceContainer : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • sourceFolder : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • targetFolder : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • routeFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Optional parameter. Path to the routing rules file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • noBase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • overwrite : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Overwrite existing image.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • diagnostic : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Enable diagnostic logging.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SealightsCLIBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • enabled : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • failBuildIfStepFail : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • commandMode
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ConfigView'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • appName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • branchName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • buildName
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'DefaultBuildName'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'EmptyBuildName'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'LatestBuildName'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'ManualBuildName'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • insertedBuildName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'UpstreamBuildName'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • upstreamProjectName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • labId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildSessionId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • additionalArguments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This section allows you to add additional arguments, as key-value pairs.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Example for additional arguments:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        server=https://prod-sealights-gw.sealights.co
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        proxy=http://localhost:8888

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Argument name Description
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        token The token provided to you by SeaLights (override the global 'token' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        tokenfile A file containing the token provided to you by SeaLights (override the global 'token' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        proxy A valid URL to a proxy server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        agentpath Override the path to SeaLights jar.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        javapath Override the path to the 'java' variable (default is 'java').
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        filesstorage A folder where sealights files for this build will be kept (override the global 'Files storage' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • techOptions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'DotNetOptions'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • namespacesIncluded : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • namespacesExcluded : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includedFilePatterns : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • excludedFilePatterns : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JavaOptions'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • packagesIncluded : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • packagesExcluded : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'EndView'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildSessionId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • labId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • additionalArguments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This section allows you to add additional arguments, as key-value pairs.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Example for additional arguments:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        server=https://prod-sealights-gw.sealights.co
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        proxy=http://localhost:8888

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Argument name Description
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        token The token provided to you by SeaLights (override the global 'token' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        tokenfile A file containing the token provided to you by SeaLights (override the global 'token' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        proxy A valid URL to a proxy server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        agentpath Override the path to SeaLights jar.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        javapath Override the path to the 'java' variable (default is 'java').
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        filesstorage A folder where sealights files for this build will be kept (override the global 'Files storage' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        appname Override default app name coming from build session id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        buildname Override default build name coming from build session id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        branchname Override default branch name coming from build session id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ExternalReportView'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • report : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildSessionId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • additionalArguments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This section allows you to add additional arguments, as key-value pairs.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Example for additional arguments:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        server=https://prod-sealights-gw.sealights.co
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        proxy=http://localhost:8888

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Argument name Description
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        token The token provided to you by SeaLights (override the global 'token' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        tokenfile A file containing the token provided to you by SeaLights (override the global 'token' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        proxy A valid URL to a proxy server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        agentpath Override the path to SeaLights jar.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        javapath Override the path to the 'java' variable (default is 'java').
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        filesstorage A folder where sealights files for this build will be kept (override the global 'Files storage' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        appname Override default app name coming from build session id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        buildname Override default build name coming from build session id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        branchname Override default branch name coming from build session id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'PrConfigView'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • appName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • branchName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildName
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'DefaultBuildName'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'EmptyBuildName'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'LatestBuildName'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ManualBuildName'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • insertedBuildName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'UpstreamBuildName'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • upstreamProjectName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • labId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildSessionId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • additionalArguments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This section allows you to add additional arguments, as key-value pairs.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Example for additional arguments:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              server=https://prod-sealights-gw.sealights.co
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              proxy=http://localhost:8888

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Argument name Description
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              token The token provided to you by SeaLights (override the global 'token' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              tokenfile A file containing the token provided to you by SeaLights (override the global 'token' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              proxy A valid URL to a proxy server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              agentpath Override the path to SeaLights jar.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              javapath Override the path to the 'java' variable (default is 'java').
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              filesstorage A folder where sealights files for this build will be kept (override the global 'Files storage' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • techOptions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'DotNetOptions'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • namespacesIncluded : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • namespacesExcluded : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • includedFilePatterns : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • excludedFilePatterns : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'JavaOptions'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • packagesIncluded : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • packagesExcluded : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • latestCommit : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • pullRequestNumber : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • repoUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • targetBranch : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'StartView'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • testStage : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildSessionId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • labId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • additionalArguments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This section allows you to add additional arguments, as key-value pairs.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Example for additional arguments:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              server=https://prod-sealights-gw.sealights.co
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              proxy=http://localhost:8888

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Argument name Description
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              token The token provided to you by SeaLights (override the global 'token' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              tokenfile A file containing the token provided to you by SeaLights (override the global 'token' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              proxy A valid URL to a proxy server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              agentpath Override the path to SeaLights jar.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              javapath Override the path to the 'java' variable (default is 'java').
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              filesstorage A folder where sealights files for this build will be kept (override the global 'Files storage' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              appname Override default app name coming from build session id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              buildname Override default build name coming from build session id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              branchname Override default branch name coming from build session id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UploadReportsView'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • reportFiles : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • reportsFolders : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • source : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildSessionId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • labId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • additionalArguments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This section allows you to add additional arguments, as key-value pairs.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Example for additional arguments:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              server=https://prod-sealights-gw.sealights.co
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              proxy=http://localhost:8888

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Argument name Description
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              token The token provided to you by SeaLights (override the global 'token' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              tokenfile A file containing the token provided to you by SeaLights (override the global 'token' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              proxy A valid URL to a proxy server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              agentpath Override the path to SeaLights jar.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              javapath Override the path to the 'java' variable (default is 'java').
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              filesstorage A folder where sealights files for this build will be kept (override the global 'Files storage' value for this build).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              appname Override default app name coming from build session id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              buildname Override default build name coming from build session id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              branchname Override default branch name coming from build session id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • cliRunner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Type: class io.sealights.plugins.sealightsjenkins.buildsteps.cli.CLIRunner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • logDestination
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Values: CONSOLE, FILE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • logFolder : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • logLevel
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Values: OFF, INFO, DEBUG, WARN, ERROR
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • logFilename : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'SecurityCheckerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'SeleniumAutoExecBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • serverUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'SeleniumBuilderBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • scriptFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • parallelSettings
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • threadPoolSize : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'SelfServiceBookmarkBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • delphixEngine : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • delphixBookmark : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Self Service Bookmark that will be used for the Delete, Share, and Unshare operations.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • delphixOperation : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Create - Create a new Self Service Bookmark. Requires a Self Service Container.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Delete - Delete a Self Service Bookmark. Requires a Self Service Bookmark.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Share - Share a Self Service Bookmark. Requires a Self Service Bookmark.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Unshare - Unshare a Self Service Bookmark. Requires a Self Service Bookmark.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • delphixContainer : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Self Service Container that will be used to Create a new Self Service Bookmark. This setting is not used for the Delete, Share, and Unshare operations.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • loadFromProps : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • saveToProps : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'SelfServiceContainerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • delphixEngine : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • delphixEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • delphixOperation : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Refresh - Refresh a Self Service Container.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Restore - Restore a Self Service Container. Requires a Self Service Bookmark for reference.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Enable - Enable a Self Service Container that has been disabled.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Disable - Disable a Self Service Container.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Recover - Recover a Self Service Container from the INCONSISTENT state.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Reset - Reset a Self Service Container.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Undo - Undo the last operation for a Self Service Container.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Lock - Lock a Self Service Container to the current logged in user.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Unlock - Unlock a Self Service Container.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • delphixBookmark : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Self Service Bookmark that will be used for the Restore operation.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • loadFromProps : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • saveToProps : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'SemanticVersioningBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • parser : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Determines which build file parser will be used for the project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • namingStrategy : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • useJenkinsBuildNumber : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If checked the current Jenkins Build Number will be used instead of any value in the build number portion of the version string found in the project file. Defaults to true. Note: The build files are not modified by the plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • envVariable : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'SendMessageBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • message : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • filepath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • recipients
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • id : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sensediaApiDeploy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • enviromentName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • revision : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sensediaApiJson
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • apiId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sensediaApiQA
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • revisionNumber : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • destination : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • logInterceptor : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • resourceOutOfSize : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • resourceSize : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • shell
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Runs a shell script (defaults to sh, but this is configurable) for building the project. The script will be run with the workspace as the current directory. Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh —, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • configuredLocalRules (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • retainOnlyVariables

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Limit which environment variables are passed to a build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Environment variables passed to the build step are filtered, unless listed below.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The behavior of this filter depends on whether the environment variable is originally defined outside Jenkins:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • If the environment variable originates from Jenkins configuration, such as JOB_URL, it will not be passed to the build step unless specified here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • If the environment variable originates from outside Jenkins, such as PATH, the behavior depends on the option Process environment variables handling: If that option is set to Retain, the original value will be passed to the build step, discarding any modifications inside Jenkins. If that option is set to Remove, the variable will not be passed to the build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The following table shows the effect of filtering on an environment variable:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Behavior Originally defined outside Jenkins Originally defined inside Jenkins
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Process environment variables handling: reset Variable is reset to original value Variable is removed
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Process environment variables handling: removed Variable is removed Variable is removed
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • processVariablesHandling (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Values: RESET, REMOVE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • retainCharacteristicEnvVars : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                When checked, characteristic environment variables will be retained in addition to the variables listed above. These environment variables are job- and build-specific, defined by Jenkins, and are used to identify and kill processes started by this build step. See the documentation for more details on starting processes.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • variables : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Whitespace separated, case insensitive list of environment variables that will be retained, i.e. not removed from the environment of this build step or reset to their default.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • unstableReturn : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If set, the shell exit code that will be interpreted as an unstable build result. If the exit code matches the value, the build results will be set to 'unstable' and next steps will be continued. On Unix-like it is a value between 0-255. The value 0 is ignored and does not make the build unstable to keep the default behaviour consistent.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'SideeX'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • protocolMenu

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The default protocol is "HTTP".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use "HTTPS (Disable certificate checking)" to disable certificate checking.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use "HTTPS (Enable certificate checking)" to enable certificate checking.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'HTTPItem'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • baseURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Your WebService base URL.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'HTTPSDisableItem'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • baseURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Your WebService base URL.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'HTTPSEnableItem'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • baseURL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Your WebService base URL.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • caFilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Your certificate file path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • stateTime : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • testCaseFilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Your test case's file path (path to your folder or to your .zip file)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sigma
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • commandLine : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The command line arguments to execute for Rapid Scan Static which override the default analyze command. This allows for any Rapid Scan Static command line options to be specified.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If this field is empty the default command will be:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            'sigma analyze --format jenkins'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ignorePolicies : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Prevents Rapid Scan Static from failing the build based on violated policies.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If selected, then the '--ignore-policies' command line argument will be added to the Rapid Scan Static analyze sub-command.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sigmaToolName : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Select the name of the Rapid Scan Static tool installation to execute Rapid Scan Static with this build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • signAndroidApks
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • androidHome : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Override the path of the Android SDK installation this build step should use to find the zipalign tool. You can also set the ANDROID_HOME environment variable in your Jenkins system or node configuration. E.g., /usr/local/android-sdk.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • apksToSign : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            An Ant-style glob, or multiple comma-separated globs, selecting the APK files relative to the workspace. For example, myApp/build/outputs/apk/myApp-unsigned.apk or **/*-unsigned.apk or app1/**/*-unsigned.apk, app2/**/*-unsigned.apk.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • archiveSignedApks : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Check this option to add all signed APKs this build step generates to the build's archived artifacts. If you don't want this step to archive the signed APK artifacts, downstream build steps can access signed APKs in the workspace at paths like SignApksBuilder-out/myApp-unsigned.apk/myApp-signed.apk, where myApp-unsigned.apk is a directory named for the input unsigned APK.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • archiveUnsignedApks : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Check this option to add all input unsigned APKs to the build's archived artifacts. These will be the APK files selected with glob pattern(s) of the APKs to Sign setting.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • keyAlias : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The entry name of the private key/certificate chain you want to use to sign your APK(s). This entry must exist in the key store credentials the Key Store ID references. If your key store contains only one key entry, which is the most common case, you can leave this field blank.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • keyStoreId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The ID of a certificate credential. This build step expects the referenced certificate credential to be a password-protected PKCS12 file containing a key protected by the same password. See this plugin's script if you need help creating such a key store to add to Jenkins, or Google how to convert your Android release key to a PKCS12 file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • signedApkMapping (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • unsignedApkNameDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • unsignedApkSibling
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • skipZipalign : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Skip the Zipalign step of signing the APK(s). This is primarily for the case of signing debug APKs, for which the zipalign command fails.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • zipalignPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Override the full path of the Android zipalign executable this build step should use to align the target APKs. You can also set the ANDROID_ZIPALIGN environment variable in your Jenkins system or node configuration. E.g., /opt/android-tools/bin/zipalign
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • venafiCodeSignWithSignTool
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • tppName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The Venafi Trust Protection Platform (TPP) to use for signing. You can define TPPs under "Manage Jenkins" -> "Configure System" -> "Venafi Code Signing".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fileOrGlob : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                A path or a glob that specifies the file(s) to be signed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • appendSignatures : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                If the target file(s) already have signatures, then append a new signature instead of overwriting the existing signatures.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • extraArgs (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                This plugin invokes Signtool under the hood. Here you can specify extra custom CLI arguments to pass to Signtool.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                These arguments will be appended to the Signtool CLI invocation. If they overlap with any arguments implicitly passed by this plugin, then Signtool will raise an error.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • argument : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • sha1 : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The SHA-1 hash of the certificate (inside the TPP) to use for code signing.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Normally you should use 'Signing certificate subject name' instead, but if that name is ambiguous, then use the SHA-1 hash to select a specific signing certificate.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Either a subject name or SHA-1 hash of the signing certificate must be given.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • signToolPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The full path to signtool.exe. If not specified, we assume that it's in PATH.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • signatureDigestAlgos (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The digest algorithm(s) to use to creating signatures.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                If none specified, 'sha256' is used as the default algorithm. This is very secure, but may not be compatible with older Windows versions. If you need compatibility with older Windows versions, you should specify 'sha1' and 'sha256' (in that order).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                When multiple digest algorithms are specified, they are applied in the order specified.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • algorithm : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • subjectName : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The Common Name ("Issued to" or "CN") of the certificate (inside the TPP) to use for code signing.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                You can obtain a list of Common Names with 'cspconfig listcertificates' and checking what comes after 'CN='.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Either a subject name or SHA-1 hash of the signing certificate must be given.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • timestampingServers (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Specifies one or more timestamping authority servers to use during signing. Specifying this is strongly recommended, because it allows signed files to be usable even after the original signing certificate has expired.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                If you specify more than one server, then a random one will be used.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Tip: here are some public timestamping authorities that you can use:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • http://timestamp.digicert.com
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • http://timestamp.globalsign.com
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • http://timestamp.comodoca.com/authenticode
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • http://tsa.starfieldtech.com
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • address : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • useMachineConfiguration : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • venafiClientToolsDir : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Specify the path to the directory in which Venafi CodeSign Protect client tools are installed. If not specified, it's autodetected from the registry. If that fails, we fallback to C:\Program Files\Venafi CodeSign Protect.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • venafiVerifyWithSignTool
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • tppName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The Venafi Trust Protection Platform (TPP) that contains the certificate that the signed file(s) were signed by. You can define TPPs under "Manage Jenkins" -> "Configure System" -> "Venafi Code Signing".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fileOrGlob : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                A path or a glob that specifies the file(s) to be verified.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • signToolPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The full path to signtool.exe. If not specified, we assume that it's in PATH.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • useMachineConfiguration : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • venafiClientToolsDir : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Specify the path to the directory in which Venafi CodeSign Protect client tools are installed. If not specified, it's autodetected from the registry. If that fails, we fallback to C:\Program Files\Venafi CodeSign Protect.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'SilkPerformerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • projectLoc : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Specify the location of your project file (.ltp).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Specify the path to your slave's workspace. Usually, this will be a relative path, but under certain conditions, you might want to use an absolute path.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • workload : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Specify the workload that is to be used for the load test. If you omit this setting, the default workload is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • successCriteria
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • userType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This is the user type defined in the active workload.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If you select All, then the filter will be applied to all user types.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • measureCategory : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Select the appropriate Measure Category.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • measureType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Depending on the Measure Category, the list of Measure Types varies.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • measureName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For possible values see the console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • valueType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Select the appropriate Value Type.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • operatorType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Specify the operator for this criterion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • chosenValue : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The value you specify here, will be compared with the actual result.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • SimplifyQA
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • api : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • token
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'SingleConditionalBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Use run conditions to decide whether a builder should be run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • buildStep : Build Step (hudson.tasks.BuildStep)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'AlwaysRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'And'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • conditions
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'BatchFileCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The script will be run with the workspace as the current directory. The text you enter in the text box will be executed as a batch file, and a result will be considered a false value if at the end of the execution %ERRORLEVEL% is not 0.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If you already have a batch file in SCM, you can just type in the path of that batch file (again relative to the workspace directory), and simply execute that.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'BooleanCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • token : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'CauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Run if the current build has a specific cause (e.g triggered by SCM or timer).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • buildCause : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The cause why the build was triggered. The following causes are supported:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • UserCause - the build was triggered by a manual interaction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • SCMTrigger - the build was triggered by a SCM change
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • TimerTrigger - the build was triggered by a timer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • CLICause - the build was triggered by via CLI interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • RemoteCause - the build was triggered via remote interface
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • UpstreamCause - the build was triggered by an upstream project
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The following causes are supported if the XTrigger plugin is installed:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • FSTrigger - the build was triggered by a file system change (FSTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • URLTrigger - the build was triggered by a URL change (URLTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • IvyTrigger - the build was triggered by an Ivy dependency version has change (IvyTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ScriptTrigger - the build was triggered by a script (ScriptTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • BuildResultTrigger - the build was triggered by a result of an other job (BuildResultTrigger Plugin)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'DayCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • daySelector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For which days do you want the build to run?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Weekends
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Saturday and Sunday
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Weekdays
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Not a weekend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Select days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Choose the days for which the build should run

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'SelectDays'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • days
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • day : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • selected : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Weekday'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Weekend'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ExpressionCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • expression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The regular expression used to match the label - Java regular expression syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • label : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The label that will be tested by the regular expression
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'ExtendedCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • condition
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'UpstreamCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Comma seperated list of projects, which will cause a true result. If empty any upstream projects will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'UserBuildCauseCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • users : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Comma seperated list of users, which will cause a true result. If empty any user started build will return true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • exclusiveCause : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      There might by multiple causes causing a build to be triggered, with this flag checked, the cause must be the only one causing this build to be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'FileExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • file : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'FilesMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • excludes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • baseDir
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'ArtifactsDir'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'JenkinsHome'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'Workspace'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'LegacyBuildstepCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • condition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • invert : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'NeverRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'NodeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • allowedNodes : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Not'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NumericalComparisonCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • lhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • rhs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • comparator
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'EqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'GreaterThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'GreaterThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'LessThan'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'LessThanOrEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'NotEqualTo'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'OntrackDSLRunCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ontrackScriptLocation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • scriptText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If set, the Ontrack DSL script will run in a Groovy sandbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • injectEnvironment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Comma-separated list of environment variable (like BUILD_NUMBER) to bind as variables into the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For example, if you set this field to BUILD_NUMBER, you can access the BUILD_NUMBER value from the script using:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ontrack.branch('PRJ', '1.0').build("1.0-${BUILD_NUMBER}", '')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • injectProperties : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          You can define variables to inject into the script by using a property-like format.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For example, the following text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  BRANCH = 1.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  BUILD = ${VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          would inject the corresponding BRANCH and BUILD variables in the script:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  ontrack.branch('PRJ', BRANCH).build(VERSION, "Build ${VERSION}")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          In the text:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • declare properties using name = value syntax
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • empty lines are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • lines started by # are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • patterns like ${VAR} are expanded using VAR from the current environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ontrackLog : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If set, the connections (request + response) to Ontrack will be logged in the build console output.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'Or'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'ShellCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • command : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses. Default shell is the same as configured for the Execute shell build step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    A non-zero exit value will be treated as a false value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'StatusCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • worstResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • bestResult : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The current build status must be equal to, or better than the Worst status and equal to, or worse than the Best status for the build step to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'StringsMatchCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • arg1 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • arg2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ignoreCase : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Ignore the case of the strings when matching them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'TextFinderCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • fileSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • regexp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • checkConsoleOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'TimeCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • earliest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • latest : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • useBuildTime : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Use the build time instead of the the time that the condition is evaluated.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    For long running builds, there can be a considerable difference between these two times.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'VariableExistsCondition'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • variableName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Name of the variable to be checked. Variables in this field will be expanded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • runner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                If the evaluation of a run condition fails, should the build fail, be marked unstable, run the build step ...

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                A run condition evaluation may fail to run cleanly - especially if it is dependent on expanding tokens provided by the Token Macro Plugin and the values are expected to be present or look like a certain type i.e. be a number.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                ...its about the action to take when the condition can not be evaluated - this is not same as evaluating to false.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'DontRun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'Fail'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'Run'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'RunUnstable'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'Unstable'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • skenai
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • orgId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • appId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'SkytapBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • action
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'AddConfigurationToProjectStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of a Skytap environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of the environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projectID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of the project to attach to a template or environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projectName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the project to which the specified template or environment will be added.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'AddTemplateToProjectStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • templateID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of a Skytap template.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • templateFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of the template.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projectID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of the project to attach to a template or environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projectName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the project to which the specified template or environment will be added.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ChangeConfigurationStateStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of a Skytap environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of the environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • targetRunState : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Valid states are running, suspended or stopped. Not all state transitions are permitted. Please consult the Skytap documentation for more details.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • haltOnFailedShutdown : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If the VM cannot be shutdown gracefully, checking this option will result in it being powered off after several retry attempts.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ChangeContainerStateStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • containerID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of a Skytap container.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • containerFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of container metadata.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • targetContainerAction : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Valid actions are start, pause, unpause or stop. Not all actions are permitted, depending on the current container run state. Please consult the Skytap documentation for more details.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ChangeVMContainerHostStatus'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of a Skytap environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of the environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • vmID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of the VM to modify.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • vmName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the VM to modify.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • containerHostStatus : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specify whether the VM should be able to host a container. Valid values are "Enable VM as Host Container" or "Disable VM as Host Container".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ConnectToVPNTunnelStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of a Skytap environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of the environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationNetworkName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the specific network associated with this environment that you wish to connect from.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • vpnID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A Skytap VPN identifier of the form "vpn-xxxxxx" where xxxxxx is an integer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CreateConfigurationStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • templateID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of a Skytap template.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • templateFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of the template.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Descriptive name for the Skytap environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of the environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CreateContainerStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of a Skytap environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of the environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • vmID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of the VM in which to create the container.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • vmName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the VM which will host the container. If more than one VM has the same name (not recommended) one will be chosen.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • containerRegistryName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of a container registry from the Skytap container registries resource.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • repositoryName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the repository in the specified container registry.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • containerName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Optional name for the container. Restricted to uppercase letters, lowercase letters, numbers, underscores (_), and periods.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If no name is provided, the container will be named New_Container_[timestamp]

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • containerCommand : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Command that will be executed when the container starts.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If no command is provided, will default to using the command in the image spec (if applicable).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • exposeAllPorts : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • containerSaveFilename : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to the JSON format file where the container metadata will be saved.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CreatePublishURLStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of a Skytap environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of the environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • urlSaveFilename : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a file where the Sharing Portal URL will be saved for use in subsequent steps.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • portalName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The mnemonic name you want to associate with the Sharing Portal
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • permissionOption : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Don't Publish: The Sharing Portal URL will not be available to the user in any way.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              View Only: User can view the VM through the Sharing Portal URL. No mouse or keyboard control is allowed, and desktop resizing is disabled.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Use:User can view the VM through the Sharing Portal URL and interact with it using a mouse or keyboard. Desktop resizing is allowed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Run, Suspend: User can view the VM through the Sharing Portal URL and interact with it using a mouse or keyboard. Desktop resizing is allowed, and the user can also run the machine if it is in a stopped or suspended state.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • hasPassword
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A password may be included in a Sharing Portal, in which case the password must be supplied by the user upon accessing the Sharing Portal URL.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • urlPassword
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CreatePublishedServiceStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of a Skytap environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of the environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • vmID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of the VM for the published service.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • vmName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the VM for the published service.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • networkName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the network associated with the environment identified above.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • portNumber : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Port number to publish the service on.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • publishedServiceFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to the file where the published service URL is saved.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CreateTemplateFromConfigurationStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of a Skytap environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of the environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • templateName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the template being created
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • templateDescription : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Description of the purpose and function of the template.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • templateSaveFilename : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to the JSON format file where the template will be saved.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DeleteConfigurationStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of a Skytap environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of the environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DeleteContainerStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • containerID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of a container.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • containerFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of the container (usually saved from a "Create Container" or "Get Container MetaData" operation).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GetContainerMetaDataStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of a Skytap environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of the environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • vmID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of the VM hosting the container.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • vmName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the VM hosting the container. If more than one VM exists with the same name, one will be chosen.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • containerName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the container in the specified environment and VM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • containerDataFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of container metadata.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ListPublishedURLForConfigurationStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of a Skytap environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of the environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • urlName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the Published URL for the specified environment
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • urlFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Full path to a file where the url has been saved.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ListVMPublishedServiceStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of a Skytap environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of the environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • vmID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of the VM for the published service.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • vmName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the VM for the published service.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • networkName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the network associated with the environment identified above.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • portNumber : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Port number of the published service.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • publishedServiceFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to the file where the published service URL is saved.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MergeTemplateIntoConfigurationStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of a Skytap environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configurationFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of the environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • templateID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique integer identifier of a Skytap template.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • templateFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to a JSON format file of the template.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path to the JSON format file where the Environment info will be saved after the command finishes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NetworkConnectStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • sourceNetworkConfigurationID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique identifier of environment that has the source network for the ICNR connection.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • targetNetworkConfigurationID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Unique identifier of environment that has the target network for the ICNR connection.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • sourceNetworkConfigurationFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Full path to a JSON format file of the environment that has the source network for the ICNR connection.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • targetNetworkConfigurationFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Full path to a JSON format file of the environment that has the target network for the ICNR connection.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • sourceNetworkName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the network associated with the source environment identified above.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • targetNetworkName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the network associated with the target environment identified above.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'SmartFrogBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • smartFrogName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • deployHost : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • hosts : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sfUserHome : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sfUserHome2 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sfUserHome3 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sfUserHome4 : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sfOpts : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • builderId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • useAltIni : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sfIni : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sfScriptSource
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'FileScriptSource'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • scriptName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • scriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'StringScriptSource'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • scriptName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • scriptContent : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'SnapshotBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • xStudioPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Path to XStudio.exe on a host machine.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • xStudioLicensePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Path to the XStudio license on a host machine.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • vagrantBox : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Name of the Vagrant box to use. Check Atlas service for the list of available boxes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • overwrite : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Abort build if the specified image is available in the remote hub.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • preInstallScriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Optional parameter. Path to a PowerShell script which should be executed before a snapshot is taken. The script can be used to install applications required by an installer of the application to snapshot.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For example WebEx installer requires Firefox browser. In order to exclude Firefox files from the snapshot it can be installed by a pre-install script.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • postSnapshotScriptPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Optional parameter. Path to a PowerShell script which should be executed after a snapshot was taken. The script can be used to disable auto-start of services or change isolation level of registry or file system items.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • resourceDirectoryPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Optional parameter. Path to a directory which should be copied to the Vagrant working directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For example WebEx snapshot requires extra files to be copied after snapshot was taken.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • dependencies : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Optional parameter. Comma separated list of dependencies. Dependencies will be fetched form the hub and added to the output image configuration loaded from the XAPPL file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Example: "oracle/jre:7.51,python/python:3.41"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • snapshotFilesToDelete : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • installScriptSettings
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Type: class org.jenkinsci.plugins.spoontrigger.SnapshotBuilder$InstallScriptSettings
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • startupFileSettings
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Type: class org.jenkinsci.plugins.spoontrigger.SnapshotBuilder$StartupFileSettings
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SnykStepBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • additionalArguments : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Additional runtime arguments that will be used to invoke the Snyk CLI. See the Snyk CLI help page for more details.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Use the standalone double-dash -- to pass arguments to the build tool invoked by the Snyk CLI. For example:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • -- -Pprofile -Dkey=value for Maven projects.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • -- --configuration runtime for Gradle projects.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • -- -Dkey=value for SBT projects.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • failOnError : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Whether the step should fail if Snyk fails to scan the project due to an error. Errors include scenarios like: failing to download Snyk's binaries, improper Jenkins setup, bad configuration and server errors.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • failOnIssues : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The "When issues are found" selection specifies if builds should be failed or continued based on issues found by Snyk.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • if "Fail the build, if severity at or above" is selected, the Jenkins build will fail if Snyk detects issues of provided level or higher.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • if "Let the build continue" is selected, the Jenkins build will continue even if Snyk detects issues in the project.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The corresponding CLI option for severity parameter: --severity-threshold

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • monitorProjectOnBuild : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Monitor the project on every build by taking a snapshot of its current dependencies on Snyk.io. Selecting this option will keep you notified about newly disclosed vulnerabilities and remediation options in the project.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • organisation : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The Snyk organisation in which this project should be tested and monitored. Leave empty to use your default organisation.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The corresponding CLI option for this parameter: --org

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projectName : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A custom name for the Snyk project created for this Jenkins project on every build. Leave empty for the project's name to be detected in the manifest file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The corresponding CLI option for this parameter: --project-name

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • severity : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • snykInstallation : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Ensures that the selected version of Snyk tools are installed. In addition, the Snyk tools will be added at the start of the PATH environment variable during builds.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If no Snyk installations have been defined in the Jenkins system config, then none of the above steps will take place.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • snykTokenId : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This needs to be the ID of an existing "Snyk API Token" credential. The token will be used to authenticate with Snyk.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If you prefer to provide the Snyk API Token another way, such using alternative credential bindings, you'll need to provide a SNYK_TOKEN build environment variable.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • targetFile : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The path to the manifest file to be used by Snyk. Leave empty for Snyk to auto-detect the manifest file in the project's root folder.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The corresponding CLI option for this parameter: --file

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • addALMOctaneSonarQubeListener
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            See help information in ALM Octane Help Center
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • pushCoverage : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • pushVulnerabilities : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • skipWebhookCreation : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The integration with SonarQube works by using Sonar’s webhook mechanism, and contains several phases:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              1. The plugin automatically configures a webhook in Sonar before the job runs (this requires an access token with global 'Administer' permission).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              2. When the Sonar analysis is ready, the SonarQube server calls the configured webhook.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              3. Results are then submitted to ALM Octane for further analysis (this requires an access token with 'Read' permissions).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If you cannot assign global 'Administer' permissions to the Sonar token (for the first phase), select "Skip webhook creation", and define a webhook manually in the Sonar server (either at the global level or project level) to the following URL: {jenkins_url}/webhooks/notify
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • sonarServerUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • sonarToken : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SonarRunnerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • additionalArguments : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • installationName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • javaOpts : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • jdk : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • project : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • properties : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • sonarScannerName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • task : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SoosSCA'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • SOOSClientId
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • SOOSApiKey
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projectName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • mode : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • onFailure : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • resultMaxWait : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • resultPollingInterval : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • apiBaseURI : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • dirsToExclude : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • filesToExclude : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • commitHash : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • branchName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • branchURI : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildURI : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • packageManagers : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SoundsBuildTask'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • afterDelayMs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • soundSource
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • selectedSound : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • value
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Values: INTERNAL, URL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • soundUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SparkNotifyBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Spark Notifier Plugin sends messages to spark spaces

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Make sure you add the correct bot or user to the spaces
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • disable : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • messageType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • roomList
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              To get the Space ID, go to web.ciscospark.com, select the space you want to message and get the ID from the URL.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Example: https://web.ciscospark.com/#/rooms/f2fbc1f0-317c-11e6-8308-f3bee39e57c5
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The Space ID would be: f2fbc1f0-317c-11e6-8308-f3bee39e57c5


                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              You can also use the room ID representation acquired from GET https://api.ciscospark.com/v1/rooms

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              See https://developer.ciscospark.com/endpoint-rooms-get.html for more information
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • rName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • rId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • messageContent : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Define the message to send to spark space

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Environment variable examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $BUILD_URL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${BUILD_URL}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${env.BUILD_URL}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Commonly used variables:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${JOB_NAME}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${JOB_URL}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${BUILD_NUMBER}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${BUILD_URL}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${BUILD_DISPLAY_NAME}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${BUILD_ID}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${BUILD_TAG}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${JAVA_HOME}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${JAVA_VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${JENKINS_URL}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${JENKINS_VERSION}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${NODE_LABELS}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${NODE_NAME}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${PATH}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${PWD}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${EXECUTOR_NUMBER}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              if using SCM or SCM trigger (see the corresponding plugin wiki for additional environment variables):
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${BRANCH_NAME}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${CHANGE_ID}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${CHANGE_URL}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${CHANGE_TITLE}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${CHANGE_AUTHOR}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${CHANGE_AUTHOR_DISPLAY_NAME}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${CHANGE_AUTHOR_EMAIL}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${CHANGE_TARGET}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              if using the Environment Injector Plugin:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${BUILD_CAUSE}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${BUILD_CAUSE_MANUALTRIGGER}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${BUILD_CAUSE_SCMTRIGGER}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${BUILD_CAUSE_UPSTREAMTRIGGER}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • ${ROOT_BUILD_CAUSE}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              All environment variables injected into the build can also be used
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • split
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • splitTask : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • splitName : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • environmentName : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • workspaceName : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • trafficTypeName : Array / List of String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • splitDefinitions : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • targetlistKey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • treatmentName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • splitYAMLFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • springBoot
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • selectedIDs : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • artifactId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • autocomplete : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • bootVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • description : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • groupId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • javaVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • language : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • packaging : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • projectName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • type : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • sseBuild
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • almServerName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • almProject : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • clientType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Client type is required for some ALM above 12.60 in authentication.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • almDomain : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • runType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • almEntityId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeslotDuration : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cdaDetails (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • deploymentAction : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • deployedEnvironmentName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • deprovisioningAction : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • description : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • environmentConfigurationId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      To find the ID of your environment configuration, right-click the entity, copy the URL, and paste it to a text editor. Use the number associated with the EntityID at the end of the URL.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • postRunAction : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • stackrox
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • apiToken : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • caCertPEM : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • enableTLSVerification : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failOnCriticalPluginError : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failOnPolicyEvalFailure : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • imageNames : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • portalAddress : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • osfBuilderSuiteStandaloneSonarLinter
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • sourcePatterns (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sourcePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • excludePatterns
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • excludePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • reportPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'StartBox'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cloud : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • workspace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The workspace in ElasticBox to look for a deployed box to start.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • box : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Box to look for instances in the selected workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • instance : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • buildStep : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Instance deployed by the selected preceding Deploy Box build step will be started.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • startET

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Configure and start a preconfigured ECU-TEST installation.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Pipeline usage
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Signatures:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    startET(String toolName) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    startET(String toolName, String workspaceDir, String settingsDir, int timeout,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            boolean debugMode, boolean keepInstance, boolean updateUserLibs) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    ETInstance.start() : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    ETInstance.start(String workspaceDir, String settingsDir, int timeout,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             boolean debugMode, boolean keepInstance, boolean updateUserLibs) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    ETInstance.start(Map<String, Object> settings) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    startET('ECU-TEST')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    def instance = ET.installation('ECU-TEST')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    startET installation: instance.installation, workspaceDir: 'C:\\Data'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    def instance = ET.newInstallation('ECU-TEST', 'C:\\Program Files\\ECU-TEST 8.0')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    instance.start()
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    def instance = ET.newInstallation toolName: 'ECU-TEST', installPath: C:\\Program Files\\ECU-TEST 8.0'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    instance.start workspaceDir: 'C:\\Data', settingsDir: 'C:\\Data', timeout: 120, debugMode: true, keepInstance: false, updateUserLibs: true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • toolName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • debugMode : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • installation (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • home : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • properties
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Type: ? extends hudson.tools.ToolProperty<?>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • keepInstance : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • settingsDir : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • updateUserLibs : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • workspaceDir : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'StartGrid'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cloudTestServerID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeOut : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The total time SCommand will wait for the grid to reach the CHECKED (Ready) state (Default 600 seconds)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • acmStartPipeline
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • aioProject : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pipeline : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • program : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'StartRSDB'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cloudTestServerID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeOut : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The total time SCommand will wait for the RSDB to reach the CHECKED (Ready) state (Default 1200 seconds)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • startTS

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Configure and start Tool-Server.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Pipeline usage
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Signatures:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    startTS(String toolName) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    startTS(String toolName, String toolLibsIniPath, int tcpPort, int timeout, boolean keepInstance) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    ETInstance.startTS() : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    ETInstance.startTS(String toolLibsIniPath, int tcpPort, int timeout, boolean keepInstance) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    ETInstance.startTS(Map<String, Object> settings) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    startTS('ECU-TEST')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    def instance = ET.installation('ECU-TEST')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    startTS installation: instance.installation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    def instance = ET.newInstallation('ECU-TEST', 'C:\\Program Files\\ECU-TEST 8.0')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    instance.startTS()
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    def instance = ET.newInstallation toolName: 'ECU-TEST', installPath: C:\\Program Files\\ECU-TEST 8.0'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    instance.startTS toolLibsIniPath: C:\\ToolLibs.ini, tcpPort: 5017, timeout: 60, keepInstance: false
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • toolName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • installation (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • home : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • properties
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Type: ? extends hudson.tools.ToolProperty<?>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • keepInstance : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • tcpPort : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • toolLibsIni : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'StartTestEnvironment'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cloudTestServerID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeOut : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The total time SCommand will wait for the test environment to reach the CHECKED (Ready) state (Default 1200 seconds)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'StopBox'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cloud : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • workspace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The workspace in ElasticBox to look for a deployed box to stop.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • box : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Box to look for instances in the selected workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • instance : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • buildStep : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Instance deployed by the selected preceding Deploy Box build step will be stopped.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • stopET

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Shutdown ECU-TEST.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Pipelines usage:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Signatures:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    stopET(String toolName) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    stopET(String toolName, int timeout) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    ETInstance.stop() : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    ETInstance.stop(int timeout) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    ETInstance.stop(Map<String, Object> settings) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    stopET('ECU-TEST')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    def instance = ET.installation('ECU-TEST')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    stopET installation: instance.installation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    def instance = ET.newInstallation('ECU-TEST', 'C:\\Program Files\\ECU-TEST 8.0')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    instance.stop()
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    def instance = ET.newInstallation toolName: 'ECU-TEST', installPath: C:\\Program Files\\ECU-TEST 8.0'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    instance.stop timeout: 60
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • toolName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • installation (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • home : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • properties
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Type: ? extends hudson.tools.ToolProperty<?>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'StopGrid'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cloudTestServerID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'StopRSDB'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cloudTestServerID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • stopTS

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Shutdown Tool-Server.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Pipelines usage:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Signatures:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    stopTS(String toolName) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    stopTS(String toolName, int timeout) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    ETInstance.stopTS() : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    ETInstance.stopTS(int timeout) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    ETInstance.stopTS(Map<String, Object> settings) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    stopTS('ECU-TEST')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    def instance = ET.installation('ECU-TEST')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    stopTS installation: instance.installation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    def instance = ET.newInstallation('ECU-TEST', 'C:\\Program Files\\ECU-TEST 8.0')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    instance.stopTS()
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    def instance = ET.newInstallation toolName: 'ECU-TEST', installPath: C:\\Program Files\\ECU-TEST 8.0'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    instance.stopTS timeout: 60
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • toolName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • installation (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • home : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • properties
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Type: ? extends hudson.tools.ToolProperty<?>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'StopTestEnvironment'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cloudTestServerID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • strobeMeasurement
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • connectionId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Required. This field specifies the host connection to use to submit a measurement.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Host connections can be configured in the Jenkins system configuration (Manage Jenkins -> Configure System).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Required. The available CES secret token to perform ISPW actions for Rest API call.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • requestType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Required. What type of request you want for the measurement. Select active if the job is currently running or Queued if the job will be running later.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • jobName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Required. Name of the job you want to measure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • body : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The body of the callback. Can leave blank if no body is needed. For example, a JSON body would be entered like { "key1" : "value1", "key2" : "value2", "key3" : "value3", ... "key10" : "value10" } If you would like to receive the completed profile's ID back as part of the json body, set the value of one of your keys to $$$profileId$$$ like {"profileId" : $$$profileId$$$}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • duration : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional. Estimated minimum measurement time in minutes. Acceptable values 1 to 1440.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • emailto : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • finalAction : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional. Controls the measurement session when the final dataset has been completed. The value can be either Quit, Stop, or Continue. See the Strobe User Guide for details. NOLIMIT is created from the limit = 1 and Continue.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • headers : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The HTTP headers of the callback. Should be colon and semicolon separated like for example, k1:v1;k2:v2;k3:v3
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • hlq : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional. High Level Qualifier. DSNAME High level qualifier - Temporary dataset prefix.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • limit : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional. Suspends sampling when the target number of samples is reached. Acceptable values 1 to 99. Must be 1 when using Final Action of Continue.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • method : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Type of HTTP request to make. POST/GET/PUT/DELETE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • profileName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional. The name of the profile. It defaults to the job name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • samples : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional. The target number of samples to take during the measurement session. Acceptable values 1000 to 150000.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • tags : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional. Tags to be assigned to profile
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • transactionId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional. May occur up to 5 times. Used for transaction profiling, the tranids are transaction ID masks used to specify the transactions to be measured. Length is limited to 4 characters. You can use a wildcard character (*) after a string of one or more characters in the Detail by Transaction field to measure transactions that meet the specified search criteria. * For Queue the additional elements are available: step � Optional, program � Optional, stringData � Optional
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • url : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      URL for the HTTP request. Leave blank if you do not want to do an HTTP callback.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'StudioToolsBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Help file for fields are discovered through a file name convention. This file is help for the "name" field. You can have arbitrary HTML here. You can write this file as a Jelly script if you need a dynamic content (but if you do so, change the extension to .jelly).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • operation : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • projectDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • outputArchiveFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • extendedClassPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • overwriteOutput : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • TRAPropertyFIle : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • topazSubmitFreeFormJcl
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • connectionId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • maxConditionCode : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • jcl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • topazSubmitJclMembers
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • connectionId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • maxConditionCode : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • jclMember : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'SvChangeModeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serverName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • force : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If set, service will be modified regardless it is locked by another user.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • mode
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Values: OFFLINE, SIMULATING, STAND_BY, LEARNING
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • dataModel
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • selectionType
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Values: BY_NAME, NONE, DEFAULT
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • dataModel : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • performanceModel
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • selectionType
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Values: BY_NAME, NONE, OFFLINE, DEFAULT
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • performanceModel : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serviceSelection
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • selectionType
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Values: SERVICE, PROJECT, ALL_DEPLOYED, DEPLOY
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • service : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectPassword : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'SvDeployBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serverName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • force : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If set, service will be redeployed regardless it is locked by another user.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • service : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Name or ID of service to be deployed. All services from project are deployed if no service is specified.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • projectPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • projectPassword : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • firstAgentFallback : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Use first agent of the same type if no agent with id referenced from virtual service exists on target server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'SvExportBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serverName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • force : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If set, service will be modified regardless it is locked by another user.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • targetDirectory : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Directory where exported services will be written.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cleanTargetDirectory : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If checked, all direct subfolders of target directory containing a project file (*.vproj) will be deleted before export.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serviceSelection
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • selectionType
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Values: SERVICE, PROJECT, ALL_DEPLOYED, DEPLOY
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • service : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectPassword : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • switchToStandByFirst : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Switch service to Stand-By mode to finish current learning before exporting learned data.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • archive : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If set, Export service(s) as project archive(s) (.vproja).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'SvUndeployBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serverName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • continueIfNotDeployed : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Don't fail if any service marked to be undeployed is not deployed on server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • force : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If set, service will be undeployed regardless it is locked by another user.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serviceSelection
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • selectionType
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Values: SERVICE, PROJECT, ALL_DEPLOYED, DEPLOY
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • service : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectPassword : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • SWEAGLEExport
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • actionName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Give each action a descriptive name to precede the job's output in the console.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • mdsName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Exact name of pending config data set for which the data should be exported
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • args : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Use comma separated values for exporter variables
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • exporter : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The SWEAGLE exporter to use when retrieving the config data.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fileLocation : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Location of file within the Jenkins workspace to save the exported data.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • format : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select the supported format of the file to be uploaded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • mapToVariables : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Sets a Jenkins Environment variable to value of a configuration data item. One variable on each line. format is colon seperated key value pair VARIABLE:Path.to.node.cdi Example: INTERNAL_IP:PRD.infra.db023.ipInternal
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • markFailed : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Mark the build as "Failed" should the data export fail.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • showResults : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Show the results of the API call in the Jenkins job console log.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • tag : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • SWEAGLESnapshot
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • actionName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Give each action a descriptive name to precede the job's output in the console.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • mdsName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Exact name of pending config data set for which the snapshot should be taken.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • description : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      A description for the snapshot
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • markFailed : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Mark the build as "Failed" should the snapshot fail.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • showResults : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Show the results of the API call in the Jenkins job console log. Warning !!! The API results of a snapshot will include the entire Config Data set.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • tag : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      A single string as TAG for that snapshot - cannot contain spaces but can utilize Jenkins variable4s ex "release1.2.${BUILD_ID}"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • SWEAGLEUpload
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • actionName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Give each action a descriptive name to precede the job's output in the console.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • fileLocation : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Fullpath of file relatove to the Jenkins workspace using Ant file filter format for selecting multiple files with wildcard. Details here. Examples: myconfig.json *.json subdirectory/*.json
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • format : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Select the supported format of the file to be uploaded.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • nodePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Enter the path where the data should be uploaded. Separate the nodenames in the path with a comma. In case the nodes do not yet exist, they will be created automatically.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • allowDelete : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Allow Delete If checked will delete any nodes and MDIs that are not part of the upload. If the nodes are included or inherited the nodes and MDIs at points of inclusion will also be deleted unless "Only Parent" is also checked.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • autoRecognize : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • description : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      A description for the snapshot
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • filenameNodes : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Create Filename Nodes If checked, nodes will be created for all matching files names in the file location and file data will be placed under file name node.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • identifierWords : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Identifier Words To make nodes part of an array uniquely identifiable, a comma separated list of 'identifier words' can be added. If no identifierWords are provided, the behavior will default to the identifierWords listed in the find.identity_attributes_discovery.word_list preference

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • markFailed : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Mark the build as "Failed" should the data upload fail for any reason.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • onlyParent : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Only Parent This controls if in case the allowDelete flag is set to true if the deletion of nodes and CDIs will only happen at the node itself, or also at any other place where the node is included or in every child node that is inheriting.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • showResults : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Show the results of the API call in the Jenkins job console log.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • subDirectories : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Search Sub-directories If checked sub-directories will also be searched recursively for matching files.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • tag : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      A single string as TAG for that snapshot - cannot contain spaces but can utilize Jenkins variable4s ex "release1.2.${BUILD_ID}"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • withSnapshot : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Allow Delete If checked will delete any nodes and MDIs that are not part of the upload. In case the nodes are included or inherited, also the nodes and MDIs at points of inclusion will be deleted

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Only Parent If checked will delete any nodes and MDIs that are not part of the upload. In case the nodes are included or inherited, also the nodes and MDIs at points of inclusion will be deleted

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Store Snapshot. This controls if automatically a snapshot should be created for each of the impacted config data sets by this data upload.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • SWEAGLEValidate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • actionName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Give each action a descriptive name to precede the job's output in the console.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • mdsName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The exact name of the config data set which should be validated.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • errMax : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Fail build on validate errors. Set thresholds used to determine if the build should be failed based on the number of validation errors or warnings.  Use -1 to ignore either threshold.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • markFailed : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Fail build on validate errors or if the pending data set fails to show up after all the retry attempts have completed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • noPending : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Fail build if no data is found for the Config Data Set (CDS).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • retryCount : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Number of retry attempts while waiting for a pending config data set. Combined with with Retry Interval to force a timeout after attempts have completed. Use "-1" for unlimited retries.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • retryInterval : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Number of seconds between each attempt to find a matching config data set for validation. Combine with with Retry Count to force a timeout after attempts have completed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • showResults : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Show the results of the API call in the Jenkins job console log.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • stored : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Validate the stored snapshot for the config data set instead of the pending data.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • warnMax : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Fail build on validate errors. Set thresholds used to determine if the build should be failed based on the number of validation errors or warnings.  Use -1 to ignore either threshold.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'SyncBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • packageid : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Enter the ID of the NuGet package you built in the build step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serverName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • dbName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • serverAuth
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • username : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • password
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • encryptConnection : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • trustServerCertificate : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • options : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • dataOptions : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • filter : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • packageVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optionally, set a custom package version. If this is left blank, the version 1.0.${BUILD_NUMBER} will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • isolationLevel : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • updateScript : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • sqlChangeAutomationVersionOption
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • value
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Values: Latest, Specific
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • specificVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'SyncStepBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • packageId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • server : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • database : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • authenticationType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • userName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • password
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • compareOptions : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • filterFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • transactionIsoLvl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'SysdigBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • bailOnFail : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • bailOnPluginFail : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • engineCredentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • engineurl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • engineverify : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • forceScan : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • inlineScanExtraParams : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • inlineScanning : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • runAsUser : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'SystemGroovy'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Executes a system groovy script similarly to hudson_url/script. The script is always executed on master.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Predefined variables:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    build
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The current AbstractBuild.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    launcher
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    A Launcher.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    listener
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    A BuildListener.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    out
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    A PrintStream (listener.logger).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • source
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'FileSystemScriptSource'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • scriptFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'StringSystemScriptSource'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • script
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • script : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sandbox : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If checked, run this Groovy script in a sandbox with limited abilities. If unchecked, and you are not a Jenkins administrator, you will need to wait for an administrator to approve the script.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • classpath
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Additional classpath entries accessible from the script.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • path : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A path or URL to a JAR file. This path should be approved by an administrator or a user with the RUN_SCRIPT permission, or the script fails. If the file or files are once approved, they are treated approved even located in another path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • oldPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • shouldBeApproved : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • oldScript : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • bindings : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Define variable bindings (in the properties file format). Specified variables can be addressed from the script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'TATestRunRegistrationBuildStep'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This step registers new test run with given category and sets the 'dtTestrunID' build variable.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • category : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • platform : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ted
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • credentialsID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • repositoryName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The name of the File-AID EX repository, which houses the required EX specifications that are to be executed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? No

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • resultsRepositoryName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The repository where Compare Pro execution results will be stored. Only applicable to comparePro specifications.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Yes, defaults to the specification repository if not specified.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • selectExecutionTypeRadio : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • specificationName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The name of the specification that is to be executed. Required if single specification execution is selected.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? No, mandatory if single specification execution is selected.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • specificationType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The type of the specification that is to be executed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? No, mandatory if single specification execution is selected.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • specificationList : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If multiple specifications are to be executed within the same pipeline, with the same configuration. Provide a list of Specification Name and Types each separated by space. For example: SPECA extract SPECB convert SPECC compare

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? No, mandatory if multi-specification execution is selected.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • exitOnFailure : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Flag to denote if it is preferred to stop the continued execution of specifications after a execution failure, in case of multi-specification execution.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Yes, defaulted to true if not defined.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? No
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • executionContext : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      TThe name of the execution context file. If the file is present at /WorkbenchCLI/EnterpriseData, the name of the file would suffice, if at a different location on the machine supply the full path with the file name. If a value for a certain argument is defined in the context file and is also passed as an argument, the value passed with the command will take precedence. To know which all parameters can be specified via the context file, view the template provided at /WorkbenchCLI/EnterpriseData named executioncontext_template.properties. Multiple execution contexts can be created as required by copying the template.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Yes, if this is not provided all other mandatory parameters have to be defined on the pipeline definition.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • executionTimeout : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The execution timeout in seconds. The default if not defined is 20 seconds.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Yes

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • defineCES : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cesURL : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The URL for the CES to be used for license validation. It can either be the URL for the cloud CES or a locally installed CES.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? No

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • useCloudCES : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Flag to denote if cloud CES should be used.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? No

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cloudCustomerNo : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The customer number, in case the cloud CES is chosen to be used. Please contact BMC customer support if you need help with this information.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Required for cloud CES.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cloudSiteID : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The Site ID, in case the cloud CES is chosen to be used. Please contact BMC customer support if you need help with this information.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Required for cloud CES.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • defineManager : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • communicationManager : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The host name or ip of the machine where the communication manager is running. The File-AID Ex repository containing the specifications that needs to be executed should be configured on this communication manager.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? No

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • communicationManagerPort : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The port on which the communication manager is running. on the specified host.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? No

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • defineServer : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • executionServer : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The host name or ip of the machine which the execution server where the EX specifications should be executed, is installed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Required for executing EX specifications.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • executionServerPort : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The port on which the execution server is running, on the specified host.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Required for executing EX specifications.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • defineHost : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • connectionId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The execution host and port where RDX specifications should be executed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Required for executing RDX specifications.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • includeCred : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • defineJobcard : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • jclJobcardLine1 : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The JCL Jobcard's line 1, applicable only to RDX execution.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Yes

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • jclJobcardLine2 : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The JCL Jobcard's line 2, applicable only to RDX execution.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Yes

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • jclJobcardLine3 : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The JCL Jobcard's line 3, applicable only to RDX execution.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Yes

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • jclJobcardLine4 : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The JCL Jobcard's line 4, applicable only to RDX execution.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Yes

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • jclJobcardLine5 : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The JCL Jobcard's line 5, applicable only to RDX execution.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Yes

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • defineQualifiers : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • datasetHighLevelQualifier : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The dataset high level qualifier to be used. Applicable only for RDX execution.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Yes

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • temporaryDatasetPrefix : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The prefix to be used for temporary datasets. Applicable only for RDX execution.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Yes

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • temporaryDatasetSuffix : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The suffix to be used for temporary datasets. Applicable only for RDX execution.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Yes

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • defineDataprivacyOverride : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • dpOverrideFADEBUG : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The data privacy override FADEBUG, that defines the logging information for the File-AID Rules Engine. Only applicable for RDX Extract executions.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Yes

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • dpOverrideFAEXPATH : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The data privacy override FAEXPATH, that defines the path for File-AID Rules Engine location. Only applicable for RDX Extract executions.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Yes

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • dpOverrideFAIPADDR : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The data privacy override FAIPADDR, that provides the File-AID Services IP address and execution port.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Yes

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • dpOverrideFAJOPTS : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The data privacy override FAJOPTS, that defines the Java options for the File-AID Rules Engine.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Yes

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • dpOverrideFAJPATH : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The data privacy override FAJAPTH, that defines the z/OS UNIX path for the Java Virtual Machine.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Yes

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? Yes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • haltPipelineOnFailure : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The credentials for the selected execution host.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Optional? Required for executing RDX specifications.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Can be defined in execution Context? No

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Note: If keystore or certificate needs to be used, leave this field empty and define the parameters in the execution context. The support for keystore and certificate based authentication via this jenkins plugin will be added in a future version.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'TagBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • changeLogFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • changeLogParameters : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • contexts : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Liquibase contexts to execute under.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • installationName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • labels : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Liquibase labels to execute
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • liquibasePropertiesPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      A liquibase.properties file can be used for default values. Any of the below settings will override what is in this file. This file should be relative to a directory listed in the "Resource directories" section.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • password : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • resourceDirectories : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Leave blank for workspace root. May be relative to workspace or an absolute path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • tag : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The tag to apply to the database. If the tag already exists, it will be moved the current datatabase state.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If left empty, an auto-generated tag based on the build number will be applied
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • url : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      example: jdbc:mysql://localhost:3306/sampledb. The JDBC driver must be available in the "lib" directory of your Liquibase installation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • username : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • tanaguru
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The name of audit or the scenario audit to be performed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • scenario : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • urlToAudit : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • urlTanaguruWebService : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The URI to the Tanaguru REST app. By default something like: http://localhost:8080/rest/service
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • performanceUnstableMark : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • performanceFailedMark : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • proxy_uri : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • proxy_username : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • proxy_password : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'TattletaleBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • inputDirectory : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • outputDirectory : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • testcompletetest
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • suite : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • accessKeyId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • actionOnErrors : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • actionOnWarnings : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • commandLineArguments : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • executorType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • executorVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • generateMHT : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • launchConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • project : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • routine : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tags : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • test : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • unit : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • value : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • launchType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • project : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • publishJUnitReports : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • routine : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • sessionScreenResolution : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • tags : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • test : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • timeout : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • unit : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • useActiveSession : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • useTCService : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • useTimeout : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • userName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • userPassword : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'TelegramBotBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • message : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'TelerikAppBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • applicationId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The unique identifier for your Telerik Platform app, available in the Settings tab. Not to be confused with the application identifier for the application package.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      More info
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • accessToken
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      A unique access token for building your Telerik Platform app, available in the Settings tab.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      More info
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • configuration : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • buildSettingsiOS
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • mobileProvisionIdentifieriOS : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • codesigningIdentityiOS : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • buildSettingsAndroid
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • codesigningIdentityAndroid : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • buildSettingsWP : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Always produces a Telerik-signed package. To run the package on device, you need to install the Telerik Application Enrollment Token (AET) on the device first.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • prismaIaC
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • assetName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • templateType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • templateVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • tags : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failureCriteriaHigh : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failureCriteriaLow : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failureCriteriaMedium : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failureCriteriaOperator : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'TerminateBox'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • cloud : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • workspace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The workspace in ElasticBox to look for a deployed box to restart.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • box : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Box to look for instances in the selected workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • instance : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • buildStep : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Instance deployed by the selected preceding Deploy Box build step will be terminated.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • delete : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • cfyTerraform
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • credentialsId : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The ID of the credentials to use when accessing Cloudify. Parameters' expansion is supported when using freestyle jobs.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • debugOutput : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If checked, then printed Cloudify events and logs will include debug-level records.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • deploymentId : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      ID to assign to the created Cloudify deployment. If not provided, one will be randomly generated. You can obtain the deployment ID from the "environment data" output file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • echoEnvData : boolean (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If checked, then the created environment's data will be printed to the job's log.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • echoInputs : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If checked, then the Cloudify deployment inputs are echoed to the Jenkins log.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • envDataLocation : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Path to a file that will contain the created environment's data. If not provided, the environment data won't be written.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • environmentVariables (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Type: java.util.Map<java.lang.String, java.lang.String>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • environmentVariablesAsString : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      YAML/JSON containing environment variables to pass to the Terraform process. The provided string will be expanded for environment variables (${VAR_NAME}).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • environmentVariablesFile : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Path, relative to the Jenkins workspace root, of a YAML/JSON file containing environment variables to pass to the Terraform process.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • executable : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Path, on Cloudify Manager, of the Terraform executable. If omitted, the value of the terraform_executable Cloudify secret will be used.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • pluginsDirectory : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Path, on Cloudify Manager, of Terraform's plugins directory. If omitted, the value of the terraform_plugins_dir Cloudify secret will be used.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • storageDirectory : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Path, on Cloudify Manager, of Terraform's storage directory. If omitted, the value of the terraform_storage_dir Cloudify secret will be used.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • templateUrl : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      URL of the Terraform template. May be a ZIP, tar.gz, or a Git repository.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • tenant : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • variables (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Type: java.util.Map<java.lang.String, java.lang.Object>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • variablesAsString : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      YAML/JSON containing variables to pass to the Terraform template. The provided string will be expanded for environment variables (${VAR_NAME}).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • variablesFile : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Path, relative to the Jenkins workspace root, of a YAML/JSON file containing parmaeters to pass to the template.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • dotnetTest
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The dotnet test command is used to execute unit tests in a given solution. It builds the solution and runs a test host application for each test project in the solution. The test host executes tests in the given project using a test framework, for example: MSTest, NUnit, or xUnit, and reports the success or failure of each test. If all tests are successful, the test runner returns 0 as an exit code; otherwise if any test fails, it returns 1.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    For multi-targeted projects, tests are run for each targeted framework. The test host and the unit test framework are packaged as NuGet packages and are restored as ordinary dependencies for the project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • blame : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Runs the tests in blame mode. This option is helpful in isolating problematic tests that cause the test host to crash. When a crash is detected, it creates an sequence file in TestResults/<Guid>/<Guid>_Sequence.xml that captures the order of tests that were run before the crash.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • blameCrash : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Runs the tests in blame mode and collects a crash dump when the test host exits unexpectedly. This option depends on the version of .NET used, the type of error, and the operating system.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      For exceptions in managed code, a dump will be automatically collected on .NET 5.0 and later versions. It will generate a dump for the test host or any child process that also ran on .NET 5.0 and crashed. Crashes in native code will not generate a dump. This option works on Windows, macOS, and Linux.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Crash dumps in native code, or when using .NET Core 3.1 or earlier versions, can only be collected on Windows, by using Procdump. A directory that contains procdump.exe and procdump64.exe must be in the PATH or PROCDUMP_PATH environment variable. Download the tools. Implies --blame.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      To collect a crash dump from a native application running on .NET 5.0 or later, the usage of Procdump can be forced by setting the VSTEST_DUMP_FORCEPROCDUMP environment variable to 1.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Available since: .NET 5.0 preview SDK
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • blameCrashCollectAlways : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Collects a crash dump on expected as well as unexpected test host exit.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Available since: .NET 5.0 preview SDK
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • blameCrashDumpType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The type of crash dump to be collected. Implies --blame-crash.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Available since: .NET 5.0 preview SDK
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • blameHang : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Run the tests in blame mode and collects a hang dump when a test exceeds the given timeout.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Available since: .NET 5.0 preview SDK
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • blameHangDumpType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The type of crash dump to be collected. It should be full, mini, or none. When none is specified, the test host is terminated on timeout, but no dump is collected. Implies --blame-hang.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Available since: .NET 5.0 preview SDK
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • blameHangTimeout : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Per-test timeout, in milliseconds, after which a hang dump is triggered and the test host process and all of its child processes are dumped and terminated.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      When used together with data driven tests, the timeout behavior depends on the test adapter used. For xUnit and NUnit the timeout is renewed after every test case. For MSTest, the timeout is used for all test cases. This option is supported on Windows with netcoreapp2.1 and later, on Linux with netcoreapp3.1 and later, and on macOS with net5.0 or later. Implies --blame and --blame-hang.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Available since: .NET 5.0 preview SDK
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • charset : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The character set to use for the step's output. If not specified, the charset associated with the build will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • collect : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Enables a data collector for the test run. For more information, see Monitor and analyze test run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • configuration : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Defines the build configuration. The default for most projects is Debug, but you can override the build configuration settings in your project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • continueOnError : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      If this is checked, errors encountered will cause the build status to be set to FAILURE (or UNSTABLE, if configured that way), but the build will be allowed to continue. Otherwise, any such errors will cause the build to be terminated immediately.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • diag : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Enables diagnostic mode for the test platform and writes diagnostic messages to the specified file and to files next to it. The process that is logging the messages determines which files are created, such as *.host_<date>.txt for the test host log, and *.datacollector_<date>.txt for the data collector log.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • filter : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Filters out tests in the current project using the given expression. For more information, see the Filter option details section. For more information and examples on how to use selective unit test filtering, see Running selective unit tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • framework : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Forces the use of dotnet or a .NET Framework test host for the test binaries. This option only determines which type of host to use. The actual framework version to be used is determined by the runtimeconfig.json of the test project. When not specified, the TargetFramework assembly attribute is used to determine the type of host. When that attribute is stripped from the .dll, the .NET Framework host is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • listTests : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      List all of the discovered tests in the current project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • logger : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specifies a logger for test results. Unlike MSBuild, dotnet test doesn't accept abbreviations: instead of "console;v=d", use "console;verbosity=detailed".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • noBuild : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Doesn't build the project before packing, and does not perform an implicit restore.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • noRestore : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Doesn't execute an implicit restore when running the command.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • nologo : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Doesn't display the startup banner or the copyright message.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Available since: .NET Core SDK 3.0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • option : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • options : Array / List of String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • optionsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For more information about these options, see the MSBuild Command-Line Reference.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If targets and/or properties are also configured, those will be passed after these options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • outputDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Directory in which to find the binaries to run. If not specified, the default path is ./bin/<configuration>/<framework>/. For projects with multiple target frameworks (via the TargetFrameworks property), you also need to specify a framework when you specify this option. dotnet test always runs tests from the output directory. You can use AppDomain.BaseDirectory to consume test assets in the output directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • project : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        What to test. This can be one of:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Path to a test project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Path to a solution.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Path to a directory that contains a project or a solution.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Path to a test project .dll file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If not specified, it searches for a project or a solution in the current directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • properties (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Type: java.util.Map<java.lang.String, java.lang.String>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • propertiesString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Additional MSBuild properties to set. These should be specified one per line, in Java properties syntax.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • resultsDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The directory where the test results are going to be placed. If the specified directory doesn't exist, it's created. The default is TestResults in the directory that contains the project file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • runSettings (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Type: java.util.Map<java.lang.String, java.lang.String>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • runSettingsString : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Inline RunSettings values, specified in in Java properties syntax.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • runtime : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The target runtime to test for.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sdk : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Name of a .NET SDK to use so that dotnet will be in the path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If the default is specified, you either need to use the With .NET element (or a withDotNet block in a pipeline script) to specify one, or ensure this step runs on a node that has a .NET SDK installed and in the path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • settings : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The .runsettings file to use for running the tests. Note that the TargetPlatform element (x86|x64) has no effect for dotnet test. To run tests that target x86, install the x86 version of .NET Core. The bitness of the dotnet.exe that is on the path is what will be used for running tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • showSdkInfo : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If enabled, dotnet --info will be executed before the main command. This shows a list of available SDKs and runtimes, indicating which one is currently being used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • shutDownBuildServers : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If enabled, dotnet build-server shutdown will be executed after the main command, shutting down build servers that may have been started.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Note: If this is not specified, a build that causes such a build server to be started may hang until those server processes end. As such, it's recommended to specify this for the last .NET-related step in a job. If using multiple SDKs, each needs its own shutdown (e.g. the .NET Core 3.1 SDK will not shut down build servers from the .NET 5.0 SDK).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Available since: .NET Core SDK 2.1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • specificSdkVersion : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Depending on the platform, the dotnet executable may use the most recent SDK available on the system, even when PATH is set up to find an older SDK deployment first; see this page for more information.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        By enabling this option, the configured SDK home directory will be checked, and if it only includes a single SDK deployment, a global.json file will be created in the current directory, referencing that SDK version and disabling roll-forward.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Note: This will silently overwrite any global.json already present in the current directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testAdapterPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Path to a directory to be searched for additional test adapters. Only .dll files with suffix .TestAdapter.dll are inspected. If not specified, the directory of the test .dll is searched.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • unstableIfErrors : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If this is set and the build completes with errors, the build will be marked as unstable instead of failed, and execution will continue to the next step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • unstableIfWarnings : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If this is set and the build completes with warnings (but no errors), the build will be marked as unstable instead of successful.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • verbosity : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Sets the MSBuild verbosity level.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • workDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The directory in which to execute the command. By default, this is the current directory (for freestyle jobs, that is the root of the job's workspace).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TestBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • packageid : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Enter the ID of the NuGet package you built in the build step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tempServer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • serverName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • dbName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • serverAuth
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • username : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • password
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • encryptConnection : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • trustServerCertificate : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • runTestSet
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • runOnlyParams : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • generateTestData
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • sqlgenPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • options : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • dataOptions : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • filter : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • packageVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Optionally, set a custom package version. If this is left blank, the version 1.0.${BUILD_NUMBER} will be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • sqlChangeAutomationVersionOption
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Values: Latest, Specific
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • specificVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testSource
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • value
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Values: scaproject, socartifact
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • projectPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • packageid : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • packageVersion : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TestCompositionRunner'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • cloudTestServerID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • composition : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The list of compositions to run, separated by newlines.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • deleteOldResults
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This setting allows you to control the storage consumption on the CloudTest server, by deleting the detailed test results from the server after it reaches a certain age. This does not have any impact on the data stored within Jenkins itself.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • maxDaysOfResults : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • additionalOptions : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If you need to pass any other command line options to the Scommand utility, specify them here. You can separate options with new lines as well as whitespaces.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • thresholds
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • transactionname : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • thresholdname : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • thresholdvalue : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • thresholdid : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • generatePlotCSV : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Produces CSV output for each threshold that can be processed by the Plot Plugin to produce graphs of performance metrics across multiple builds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • testFolder
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Execute a test folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • executionConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • stopOnError : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • checkTestFile : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • recordWarnings : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • failFast : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • packageConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • runTest : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • runTraceAnalysis : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • parameters
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Definition of ECU-TEST package parameters consisting of a unique name and a value.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Numeric value entries will be automatically converted to Numeric type in ECU-TEST.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For now only Numeric and String types are supported.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • outputParameters
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Definition of ECU-TEST package output parameter consisting of a unique name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Defined package output parameters are written to related environment variables after test execution has finished.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The environment variable has the following syntax: TT_TEST_RETVAL_<VARIABLE NAME>_<INDEX>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • execInCurrentPkgDir : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • filterExpression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • jobExecMode
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Values: NO_EXECUTION, SEQUENTIAL_EXECUTION, PARALLEL_EXECUTION, SEPARATE_SEQUENTIAL_EXECUTION, SEPARATE_PARALLEL_EXECUTION, NO_TESTCASE_EXECUTION, TEST_GUIDE_EXECUTION
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • recursiveScan : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • scanMode (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Values: PACKAGES_ONLY, PROJECTS_ONLY, PACKAGES_AND_PROJECTS
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tbcFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tcfFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • forceReload : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • loadOnly : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • keepConfig : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • constants
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Definition of global constants consisting of an unique name and a value. Numeric value entries will be automatically converted to a Python integer literal, or to a Python string literal.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If the global constant does not exist it is created and saved instantly in the current test configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TestLinkBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testLinkName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testProjectName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testPlanName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • platformName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • buildName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • customFields : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testPlanCustomFields : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • executionStatusNotRun : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • executionStatusPassed : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • executionStatusFailed : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • executionStatusBlocked : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • singleBuildSteps : Array / List of Build Step (hudson.tasks.BuildStep)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • beforeIteratingAllTestCasesBuildSteps : Array / List of Build Step (hudson.tasks.BuildStep)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • iterativeBuildSteps : Array / List of Build Step (hudson.tasks.BuildStep)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • afterIteratingAllTestCasesBuildSteps : Array / List of Build Step (hudson.tasks.BuildStep)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • transactional : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • failedTestsMarkBuildAsFailure : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • failIfNoResults : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • failOnNotRun : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • resultSeekers
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JUnitCaseClassNameResultSeeker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • keyCustomField : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attachJUnitXML : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includeNotes : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JUnitCaseNameResultSeeker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • keyCustomField : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attachJUnitXML : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includeNotes : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JUnitMethodNameResultSeeker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • keyCustomField : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attachJUnitXML : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includeNotes : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JUnitSuiteNameResultSeeker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • keyCustomField : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attachJUnitXML : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includeNotes : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TAPFileNameMultiTestPointsResultSeeker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • keyCustomField : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attachTAPStream : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attachYAMLishAttachments : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includeNotes : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • compareFullPath : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • testpointsAsExecutions : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TAPFileNameResultSeeker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • keyCustomField : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attachTAPStream : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attachYAMLishAttachments : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includeNotes : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • compareFullPath : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TestNGClassNameResultSeeker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • keyCustomField : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attachTestNGXML : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • markSkippedTestAsBlocked : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includeNotes : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TestNGMethodNameDataProviderNameResultSeeker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • keyCustomField : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attachTestNGXML : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • markSkippedTestAsBlocked : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dataProviderNameKeyCustomField : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includeNotes : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TestNGMethodNameResultSeeker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • keyCustomField : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attachTestNGXML : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • markSkippedTestAsBlocked : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includeNotes : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TestNGSuiteNameResultSeeker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • keyCustomField : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attachTestNGXML : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • markSkippedTestAsBlocked : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includeNotes : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TestOdysseyBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • jobId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • minPassPercentage : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Minimum Pass Percentage : provide the minimum pass percentage for the build to pass. Percentage is calculated as below : TC Passed * 100 /TC Executed
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • testPackage
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Execute a ECU-TEST package.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • executionConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • stopOnError : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • checkTestFile : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • recordWarnings : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • packageConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • runTest : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • runTraceAnalysis : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • parameters
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Definition of ECU-TEST package parameters consisting of a unique name and a value.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Numeric value entries will be automatically converted to Numeric type in ECU-TEST.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For now only Numeric and String types are supported.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • outputParameters
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Definition of ECU-TEST package output parameter consisting of a unique name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Defined package output parameters are written to related environment variables after test execution has finished.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The environment variable has the following syntax: TT_TEST_RETVAL_<VARIABLE NAME>_<INDEX>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tbcFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tcfFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • forceReload : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • loadOnly : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • keepConfig : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • constants
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Definition of global constants consisting of an unique name and a value. Numeric value entries will be automatically converted to a Python integer literal, or to a Python string literal.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If the global constant does not exist it is created and saved instantly in the current test configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • testProject
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Execute a ECU-TEST project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • executionConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • timeout : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • stopOnError : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • checkTestFile : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • recordWarnings : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • execInCurrentPkgDir : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • filterExpression : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • jobExecMode
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Values: NO_EXECUTION, SEQUENTIAL_EXECUTION, PARALLEL_EXECUTION, SEPARATE_SEQUENTIAL_EXECUTION, SEPARATE_PARALLEL_EXECUTION, NO_TESTCASE_EXECUTION, TEST_GUIDE_EXECUTION
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testConfig (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tbcFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tcfFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • forceReload : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • loadOnly : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • keepConfig : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • constants
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Definition of global constants consisting of an unique name and a value. Numeric value entries will be automatically converted to a Python integer literal, or to a Python string literal.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          If the global constant does not exist it is created and saved instantly in the current test configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TestRunner'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • stack : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The GitHub repository where the stack is stored, in the form <owner>/<name> (no spaces!).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • branch : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The repository branch to test.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testNames : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        A comma-separated list of test names to run. Leave empty to run all tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • undeploy : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Whether to terminate the test harness machine after test execution.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiKey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The Stack Hammer API key, copied from the stack settings dialog in the Stack Hammer user interface.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TestStepBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • packageId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • serverType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • server : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • database : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • authenticationType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • userName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • password
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Type: class hudson.util.Secret
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • runTestMode : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • runTests : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • compareOptions : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • dgenFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • filterFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • generateTestData : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • transactionIsoLvl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TestStudioAPITestBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Jenkins plugin for execution of Progress Test Studio for API tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiRunnerPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Full path to Test Studio for API Runner executable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • project : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The path to the project folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • test : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify test/tests to run, one per line.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        .\CRUD Tests\Get All Users
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        .\Get User Id By Its Username

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • startFrom : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • stopAfter : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • variable : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specify test parameters in key=value pairs, one pair per line.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        url=http://localhost:5000
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        user-name="John Smith"

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • dontSaveContexts : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testAsUnit : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If checked Test Studio for API test will be converted to JUnit test, else test will be converted to testsuite and test steps will be converted to JUnit test.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TestStudioTestBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Jenkins plugin for execution of Progress Test Studio tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • artOfTestRunnerPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Full path to TestStudio Runner executable.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The full path to the .tstest test or .aiilist (test list) to run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • settingsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The path to a XML file containing the custom params and/or settings for the run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • dateFormat : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Date and time format used in StartTime and EndTime result fields. If empty default format "yyyy-mm-dd'T'HH:mm:ss" is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Letter Date or Time Component Presentation Examples
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        G Era designator Text AD
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        y Year Year 1996; 96
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Y Week year Year 2009; 09
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        M/L Month in year Month July; Jul; 07
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        w Week in year Number 27
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        W Week in month Number 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        D Day in year Number 189
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        d Day in month Number 10
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        F Day of week in month Number 2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        E Day in week Text Tuesday; Tue
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        u Day number of week Number 1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        a Am/pm marker Text PM
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        H Hour in day (0-23) Number 0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        k Hour in day (1-24) Number 24
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        K Hour in am/pm (0-11) Number 0
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        h Hour in am/pm (1-12) Number 12
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        m Minute in hour Number 30
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        s Second in minute Number 55
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        S Millisecond Number 978
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        z Time zone General time zone Pacific Standard Time; PST; GMT-08:00
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Z Time zone RFC 822 time zone -0800
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        X Time zone ISO 8601 time zone -08; -0800; -08:00

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Input string Pattern
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        2001.07.04 AD at 12:08:56 PDT yyyy.MM.dd G 'at' HH:mm:ss z
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Wed, Jul 4, '01 EEE, MMM d, ''yy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        12:08 PM h:mm a
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        12 o'clock PM, Pacific Daylight Time hh 'o''clock' a, zzzz
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        0:08 PM, PDT K:mm a, z
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        02001.July.04 AD 12:08 PM yyyyy.MMMM.dd GGG hh:mm aaa
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Wed, 4 Jul 2001 12:08:56 -0700 EEE, d MMM yyyy HH:mm:ss Z
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        010704120856-0700 yyMMddHHmmssZ
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        2001-07-04T12:08:56.235-0700 yyyy-MM-dd'T'HH:mm:ss.SSSZ
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        2001-07-04T12:08:56.235-07:00 yyyy-MM-dd'T'HH:mm:ss.SSSXXX
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        2001-W27-3 YYYY-'W'ww-u
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectRoot : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The path to the project root folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testAsUnit : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If checked TestStudio test will be converted to JUnit test, else test steps will be converted.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • outputPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TestSwarmBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testswarmServerUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • jobName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • userName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • authToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • maxRuns : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • chooseBrowsers : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • pollingIntervalInSecs : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • timeOutPeriodInMins : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • minimumPassing : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testSuiteList
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • testName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • testUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • testCacheCracker : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • disableTest : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • testweaver
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • experimentName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • jUnitReportDirectory : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • acceptInconclusiveWatchers : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • exportAsCsvDecimalSeparator : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • exportAsCsvDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • exportAsCsvNoQuote : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • exportAsCsvQuote : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • exportAsCsvReports : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • exportAsCsvSeparator : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • htmlReportDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • instrumentView : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • namespacePattern : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • parameterValues : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • runScenarioLimit : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • runTimeLimit : long (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • silverParameters : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TesteinRunBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • targetType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • targetId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Id of the target, that you want to run. Could be found on the target's detail page
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • downloadReport : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If checked, execution report will be downloaded in format Testein-Report-{runId}.html
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • downloadLogs : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TesteinUploadStepBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • enableJs
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • jsFilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • jsonFilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • enableJar
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • jarFilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • overwrite : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If checked, upload will overwrite existing test step. If not checked and test step already exists - an error will be generated
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TestingBotBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TestiniumPlugin'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectId : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Project of the plan to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • planId : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Testinium plan to run
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • abortOnError : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If checked fails the current build if at least one of the tests encounter an error
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • abortOnFailed : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If checked fails the current build if at least one of the tests is unsuccessful
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • failOnTimeout : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ignoreInactive : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        If checked jenkins won't raise error if selected plan is deactivated from Testinium.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • timeoutSeconds : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TestopiaBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testopiaInstallationName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testRunId : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • singleBuildSteps : Array / List of Build Step (hudson.tasks.BuildStep)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • beforeIteratingAllTestCasesBuildSteps : Array / List of Build Step (hudson.tasks.BuildStep)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • iterativeBuildSteps : Array / List of Build Step (hudson.tasks.BuildStep)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • afterIteratingAllTestCasesBuildSteps : Array / List of Build Step (hudson.tasks.BuildStep)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • failedTestsMarkBuildAsFailure : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • resultSeekers
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JUnitCaseClassNameResultSeeker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JUnitCaseNameResultSeeker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JUnitMethodNameResultSeeker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'JUnitSuiteNameResultSeeker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TAPFileNameResultSeeker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TestNGClassNameResultSeeker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • markSkippedTestAsBlocked : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TestNGMethodNameResultSeeker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • markSkippedTestAsBlocked : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TestNGSuiteNameResultSeeker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • includePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • markSkippedTestAsBlocked : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • convertTestsToRun
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This build step is intended to support execution of automated tests from Micro Focus ALM Octane.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      The builder searches for the "testsToRun" parameter which is sent from ALM Octane as part of the execution framework.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Once it is found, its value is converted to the format of the selected testing framework, and injected to the "testsToRunConverted" environment parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Later, the new parameter can be used in the appropriate execution builder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • To use in parameter textboxes, use the following syntax: ${testsToRunConverted}

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • To use in the scripts, use the following syntax:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Linux shell: $testsToRunConverted
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Windows batch command: %testsToRunConverted%
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Pipeline script (workflow job): "${params.testsToRunConverted}"

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        See examples in the tables below:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Framework Linux shell
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Maven Surefire mvn clean -Dtest=$testsToRunConverted test
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Maven Failsafe mvn clean -Dit.test=$testsToRunConverted verify
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Gradle gradle test $testsToRunConverted
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Protractor protractor conf.js --grep="$testsToRunConverted"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Cucumber-JVM over Maven/
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        BDD Scenario
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        mvn clean -Dcucumber.options="$testsToRunConverted" test
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        JBehave over Maven mvn clean -Dfeatures="$testsToRunConverted" test

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Framework Windows batch command
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Maven Surefire mvn clean -Dtest=%testsToRunConverted% test
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Maven Failsafe mvn clean -Dit.test=%testsToRunConverted% verify
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Gradle gradle test %testsToRunConverted%
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Protractor protractor conf.js --grep="%testsToRunConverted%"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Cucumber-JVM over Maven/
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        BDD Scenario
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        mvn clean -Dcucumber.options="%testsToRunConverted%" test
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        JBehave over Maven mvn clean -Dfeatures="%testsToRunConverted%" test

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Framework Pipeline script
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Maven Surefire bat 'mvn clean -Dtest=${params.testsToRunConverted} test'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Maven Failsafe bat 'mvn clean -Dit.test=${params.testsToRunConverted} verify'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Gradle bat 'gradle test ${params.testsToRunConverted}'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Protractor bat(/protractor conf.js --grep="${params.testsToRunConverted}"/)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Cucumber-JVM over Maven/
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        BDD Scenario
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        bat(/mvn clean -Dcucumber.options="${params.testsToRunConverted}" test/)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        JBehave over Maven bat(/mvn clean -Dfeatures="${testsToRunConverted}" test/)


                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Notes/Limitations :
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • UFT: In order to build a UFT MTBX file, this builder needs to know the test check-out directory. By default this is the job workspace directory. If tests are checked out in another directory, define in the job a String parameter "testsToRunCheckoutDirectory" with the correct directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • JUnit/TestNG: Supported for JUnit 4.7+, Surefire Plugin 2.19+, Failsafe Plugin 2.12.1+.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Cucumber-JVM over Maven: If your project contains several run classes, specify a run class that will be used, otherwise all run classes will be executed by Cucumber. You can specify test runner by adding: '-Dtest=[runner class name]' to the Maven command
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • JBehave over Maven: read more about integration with JBehave here


                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      See more help information in ALM Octane Help Center
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • framework : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Select the testing framework whose format you want to convert to.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • format : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        In the 'Custom conversion format' field, enter json that describes how to convert tests from raw format to the format of your testing framework. After conversion, the result is injected to the "testsToRunConverted" parameter.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Note: Click "Validate" to check the correctness of the inserted configuration.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The following are the components that you can use in the "Custom conversion format" :
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • testPattern - describes the pattern for converting single test. All parameters that needs to be replaced be real test data, should start with $, for example $package, $class, $testName, $externalRunId, $myCustomParam. All other characters in the pattern will appear in the final result as is.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • testDelimiter - the delimiter used to separate different tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • prefix - a prefix for the whole conversion result.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • suffix - a suffix for the whole conversion result.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • allowDuplication - indicate whether duplications are allowed in final result. Default is true.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • testsToRunConvertedParameter - the parameter name that will contain the conversion result. Default value is "testsToRunConverted".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • replacements - the array of replace methods.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The minimal configuration is:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "testPattern": "$package.$class#$testName",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "testDelimiter": ","
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For example:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The testsToRun parameter received 2 tests separated by a semicolon: v1:myPackage1|myClass1|myTest1;myPackage2|myClass2|myTest2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The defined testPattern is: $package.$class#$testName
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The defined testDelimiter is: ,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $package variable will get a value of myPackage1 for the first test and myPackage2 for the second test.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class variable will get a value of myClass1 for the first test and myClass2 for the second test.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $testName variable will get a value of myTest1 for the first test and myTest2 for the second test.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The testsToRunConverted parameter will be equal: myPackage1.myClass1#myTest1,myPackage2.myClass2#myTest2

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Optional:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        There is a possibility to alter values received from ALM Octane, for example to set lowercase to the testName, replace spaces by '_', and so on.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Here are examples of available replace methods. Each replace method contains "target" property that define what parts of the test pattern are affected by replace method, available values are $package,$class,$testName. Its possible to put several values separated by '|'. The replacements are executed in the order they appear in the 'Custom conversion format' json.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        "replacements": [
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "type": "replaceRegex",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "target": "$package|$class|$testName",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "regex": "aaa",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "replacement": "bbb",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "description": "Replaces all the sequence of characters matching the regex with a replacement string."
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        },{
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "type": "replaceRegexFirst",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "target": "$package|$class|$testName",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "regex": "aaa",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "replacement": "bbb",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "description": "Replaces the first substring that matches the given regex with the given replacement. For example, given regex '@(.*)@.*' , replacement '$1', and test name '@myTag@ my test name' - will replace test name by the content located between @, that is - 'myTag'."
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        },{
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "type": "replaceString",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "target": "$package|$class|$testName",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "string": "xxx",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "replacement": "yyy",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "description": "Replaces all occurrences of ‘string’ with ‘replacement’."
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        },{
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "type": "joinString",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "target": "$package|$class|$testName",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "prefix": "xxx",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "suffix": "yyy",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "description": "Add prefix and suffix to the test template."
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        },{
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "type": "toLowerCase",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "target": "$package|$class|$testName",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "description": "Convert test template to lower case."
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        },{
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "type": "toUpperCase",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "target": "$package|$class|$testName",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "description": "Convert test template to upper  case."
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        },{
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "type": "notLatinAndDigitToOctal",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "target": "$package|$class|$testName",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "description": "Replaces all non-latin characters and digits ^[a-zA-Z0-9] to their ASCII octal value."
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        }]
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TestsigmaExecutionBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiEndPoint : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Testsigma Rest API end point.Ex: http://localhost:8080/api/v1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For more info visit Testsigma documentation.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • apiKey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        You can generate Testsigma API key by logging in to Testsigma App and navigating to Configuration-->Api Keys.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For more info visit Testsigma documentation.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • testPlanId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        You can get TestPlan Id by logging in to Testsigma App and navigating to Test Plans-->Test Plan Name-->CI/CD Integrations. For more info visit Testsigma documentation.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • maxWaitInMinutes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Time in minutes build step waits for the completion of Testsigma Test Plan run. If Test Plan run is taking more time than specified, the build step will exit with a success state. However you can check execution results by logging in to Testsigma App.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For more info visit Testsigma documentation.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • reportsFilePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Test execution reports (in Junit Report format) will be copied to given file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For more info visit Testsigma documentation.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'TicsAnalyzer'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ticsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The fully qualified directory where TICS is located, e.g. C:\Program Files\TIOBE\TICS\BuildServer. This directory should contain the TICSQServer executable. You can leave this field empty if these executables can be found on the PATH environment variable of the Jenkins agent user or if you checked the "Install TICS command-line tools" checkbox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ticsConfiguration : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Τhe TICS Configuration is a URL pointing to the 'cfg' API endpoint of the TICS Viewer. It is of the following format https://192.168.1.1/tiobeweb/TICS/api/cfg?name=-. This URL contains the name of the TICS Analyzer Configuration or '-' in case of the default configuration. Please ask your TICS Representative to provide you with a valid configuration name.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        For TICS installations using the legacy deployment architecture, TICS Configuration points to the configuration directory, e.g. C:\Program Files (x86)\TIOBE\TICS\FileServer\cfg. The TICS configuration directory contains the SERVER.yaml and PROJECTS.yaml configuration files, among others. This setting sets the TICS environment variable before executing TICSQServer. You can leave this field empty if this variable is already set on the Jenkins slave.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The name of the project for which this run should be performed. This project should already exist in the TICS Configuration as you cannot create a new project using this plugin. You can create a new project by using the Build Configuration page of the Viewer or by using TICSMaintenance from the command line. Note that you can use Jenkins environment variables such as $JOB_NAME here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • branchName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The name of the branch for which the run should be performed. Although most projects only have one branch (named "trunk", "main", or "master"), you still need to specify the branch name here because more branches might be added later. To find out the branches of a project you can use the Build Configuration page of the TICS Viewer.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • branchDirectory : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The branch directory is the root directory of the source files for the branch. If this setting is provided, the branch directory will be updated prior to each TICSQServer run by invoking TICSMaintenance -branchdir. Note that you can use Jenkins variables (such as $WORKSPACE) here.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • environmentVariables : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        A new-line separated list of environment variables that will be set before invoking TICSQServer. Some TICS modules and code checkers might need configuration using environment variables. Note that you can use environment variables such as $WORKSPACE here. Example:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        TICS_M2_OPTS=-s C:\Tools\apache-maven\conf\settings.xml
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        TICS_COVERITY_URL=http://localhost:8080
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        QACBIN=C:/QAC/common/bin
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        PATH=C:\Tools\bin;$PATH
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • createTmpdir : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • tmpdir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        TICSQServer will create a directory named "ticstmpdir" in this directory. This tmpdir will contain log files useful for debugging problems encountered during the TICSQServer analysis. You can use Jenkins variables here. Example: C:/temp/$JOB_NAME.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • extraArguments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Extra arguments to pass to the TICSQServer invocation.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • calc
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Check one or more metrics to have TICSQServer only calculate these metrics (for changed files). If nothing is checked, all metrics will be calculated.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ABSTRACTINTERPRETATION : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ACCUCHANGERATE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ACCUFIXRATE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ACCULINESADDED : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ACCULINESCHANGED : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ACCULINESDELETED : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ALL : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • AVGCYCLOMATICCOMPLEXITY : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • BUILDRELATIONS : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • CHANGEDFILES : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • CHANGERATE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • CODINGSTANDARD : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • COMPILERWARNING : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • DEADCODE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • DUPLICATEDCODE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ELOC : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • FANOUT : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • FINALIZE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • FIXRATE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • GLOC : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • INCLUDERELATIONS : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • INTEGRATIONTESTCOVERAGE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • LINESADDED : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • LINESCHANGED : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • LINESDELETED : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • LOC : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • MAXCYCLOMATICCOMPLEXITY : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • PREPARE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • SECURITY : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • SYSTEMTESTCOVERAGE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • TOTALTESTCOVERAGE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • UNITTESTCOVERAGE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • recalc
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Check one or more metrics to have TICSQServer recalculate these metrics, even for unchanged files. If nothing is checked, TICSQServer does not force recalculation of metrics for unchanged files.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ABSTRACTINTERPRETATION : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ACCUCHANGERATE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ACCUFIXRATE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ACCULINESADDED : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ACCULINESCHANGED : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ACCULINESDELETED : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ALL : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • AVGCYCLOMATICCOMPLEXITY : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • BUILDRELATIONS : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • CHANGEDFILES : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • CHANGERATE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • CODINGSTANDARD : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • COMPILERWARNING : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • DEADCODE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • DUPLICATEDCODE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ELOC : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • FANOUT : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • FINALIZE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • FIXRATE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • GLOC : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • INCLUDERELATIONS : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • INTEGRATIONTESTCOVERAGE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • LINESADDED : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • LINESCHANGED : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • LINESDELETED : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • LOC : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • MAXCYCLOMATICCOMPLEXITY : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • PREPARE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • SECURITY : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • SYSTEMTESTCOVERAGE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • TOTALTESTCOVERAGE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • UNITTESTCOVERAGE : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • installTics : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        By enabling this checkbox the TICS command-line tools will be installed. For TICS installations using the legacy deployment architecture, this checkbox should not be used and TICS should be installed manually on the machine that runs this job.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • runTics
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • projectName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • branchName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • branchDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • calc : Array / List of String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • credentialsId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • environmentVariables (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Type: java.util.LinkedHashMap<java.lang.String, java.lang.String>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • extraArguments : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • installTics : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • recalc : Array / List of String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ticsBin : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ticsConfiguration : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tmpdir : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • totaltestUT
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • connectionId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This field specifies the host connection to use to execute on.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Host connections can be configured in the Jenkins system configuration (Manage Jenkins -> Configure System).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The available credentials to use for logging onto the host. Alternatively, click Add to add credentials using the Credentials Plugin. Refer to the Jenkins documentation for the Credentials Plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • projectFolder : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The path to the Topaz for Total Test project folder containing the test scenario or test suite to run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • testSuite : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            A comma separated list of Topaz for Total Test test scenarios/suites names. On Windows the names are case-insensitive.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Wild carding of test scenarios/suites names can be done using '*' for any characters and '?' for a single character. 'All_Scenarios' can be used to run all test scenarios or 'All_Suites' can be used to run all test suites.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • jcl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The name of the JCL file to run the Topaz for Total Test test scenario or test suite.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ccClearStats : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Indicates if the Code Coverage repository statistics should be cleared before running the test.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ccDB2 : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ccPgmType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The type of the program specified on the EXEC statement, in the JCL, for the Total Test step. If PGM=IKJEFT01 was specified, select "Live DB2". When PGM=DFSRRC00 was specified select "Live IMS", otherwise select TotalTest.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ccRepo : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The dataset where Topaz for Total Test will write coverage information. This dataset will later be fed into the Code Coverage reporting system. Members with like systems, names, and compile date and times will automatically be merged together.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ccSystem : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            A system name for this test. Code Coverage keeps statistics by programs separate by system name. This name can be any-specified name. The name must be 16 characters or less and will be converted to upper-case when the test is run.s. If not specified defaults to the test scenario/suite name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ccTestId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            A test identification to be added to the Code Coverage test. This information can be useful when reviewing test reports from Code Coverage. This test identification can be any-specified string. The test identification must be 16 characters or less and will be converted to upper-case when the test is run. If not specified defaults to the test scenario/suite name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • deleteTemp : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Delete temporary files after test run. The default is to delete temporary files.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • hlq : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Optional high level qualifier to be used when allocating datasets.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • hostPort : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • recursive : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Indicates if the test runner should recursively check for Total Test Unit Test projects. The default is not to recursively check for Total Test Unit Test projects..
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • useStubs : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Indicates if stubs should be used when running the test scenario or test suite. The default is to use stubs.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • totaltest
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • environmentId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Environment ID of the environment defined in the Total Test repository server or local TotalTestConfiguration directory where tests are executed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • folderPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Folder path to the test scenario or context file(s) to execute (.xactx or .xaunit)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • A relative path or an empty string will set the folder path relative to the Jenkins workspace directory
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • An absolute path can also be used to specify Test folder path
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • serverUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This field specifies the CES URL where the Total Test repository server is published on.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The CES URL can be configured in Jenkins system configuration (Manage Jenkins -> Configure System -> Compuware Configurations -> Host Connections).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • serverCredentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The available credentials to use for logging onto CES (used only when using the Total Test repository server). Alternatively, click Add to add credentials using the Credentials Plugin. Refer to the Jenkins documentation for the Credentials Plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • connectionId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This field specifies the host connection to use to execute on.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Host connections can be configured in the Jenkins system configuration (Manage Jenkins -> Configure System).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The available credentials to use for logging onto the host. Alternatively, click Add to add credentials using the Credentials Plugin. Refer to the Jenkins documentation for the Credentials Plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sonarVersion : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            SonarQube version 5 or 6
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • logLevel : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Set the logging level to be used when executing the test.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • accountInfo : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Optional job account information.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use the accounting information field to enter an account number and any other accounting information that your installation requires.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The accounting information must be entered, just as it would be on the job card. Currently only 52 characters are allowed for the accounting information.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ccThreshold : int (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • clearCodeCoverage : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • collectCCRepository : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • collectCCSystem : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • collectCCTestID : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • collectCodeCoverage : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Select this option to collect Code Coverage information during test execution.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • compareJUnits : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • contextVariables : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Execution context variable in the format "field1=value1,field2=value2".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • createJUnitReport : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • createReport : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • createResult : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • createSonarReport : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • customerId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Compuware customer id for use on the Compuware cloud license server.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This is required for obtaining a license from the Compuware license server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • enterpriseDataHostPort : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This field allows you to specify the host and port of the Enterprise Data Communication Manager to connect to. The host and port must be separated by a ':' character.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • enterpriseDataWorkspace : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The Topaz for Enterprise Data Communication Manager's workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • haltAtFailure : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • haltPipelineOnFailure : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • jclPath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The path to the JCL file to use when executing '.testscenario' files.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • jsonFile : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Optional JSON file containing tests to execute.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use the JSON file field to enter a JSON file containing the tests to execute.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Note: This field is only used for Total Test CLI version 20.04.01 and later

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • localConfig : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            When selected use the defined local TotalTestConfiguration directory. Otherwise use the Total Test repository server running on the CES server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • localConfigLocation : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Optional location of TotalTestConfiguration directory.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • programList : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Optional comma separated list of tests tests to execute.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use the Test list field to enter a comma separated list of program names to be tested. Will only include test scenarios that have component under test defined as one of these
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Note: This field is only used for Total Test CLI version 20.04.01 and later

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • recursive : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Should test scenarios be found recursively in the folder
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • reportFolder : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The folder path containing produced test results vary depending on the Total Test CLI version.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Total Test CLI version 20.03.01 and later
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • The Report Folder field will be ignored.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • The produced test result will be contained in the Output directory relative to the Test folder path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Junit and Sonar report files are copied to TTTUnit and TTTSonar folders in the Jenkins workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Total Test CLI version prior to 20.03.01
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • The produced test results will be contained in this folder path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Default folder path is TTTReport.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Relative folder paths are relative to the Jenkins workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • An absolute path can also be used to specify Report folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Note: This field is only used for Total Test CLI version prior to 20.03.01
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • selectEnvironmentRadio : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • selectProgramsOption : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • selectProgramsRadio : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • siteId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Compuware customer's site id for use on the Compuware cloud license server.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This is required for obtaining a license from the Compuware license server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sourceFolder : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Optional file path to a folder that contains source code of tested programs.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Default is COBOL.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            It is only used to set the source path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • stopIfTestFailsOrThresholdReached : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Stop if test fails or threshold is reached (default is true)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • uploadToServer : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • useEnterpriseData : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • useScenarios : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Should .scenarios files be used instead of .context files
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'ToxBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • toxIni : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • recreate : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • toxenvPattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tptExecute
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The "Execute TPT test cases" build step can run in two modes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Just execute the tests within this Job. The given values will be used to create a command that will be executed. This command could be typed into the command line and would work.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Use this Job as a Master. In this mode the TPT RMI API is used to read the test cases that must be executed. For every test case a slave job is started and parameters are provided that can be used by the "Execute TPT tests slave" build step. The slaves copy their reults back to the master and the master will aggregate the test results.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          The master mode can be activated and configured by clicking on the "Advanced" button.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • exePaths : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • executionConfiguration
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • tptFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configuration : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • id : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • enableTest : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • reportDir : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • testSet : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • testdataDir : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • timeout : long (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • arguments : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • enableJunit : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • isTptMaster : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • jUnitLogLevel (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Values: NONE, ERROR, WARNING, INFO, ALL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • jUnitreport : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • slaveJob : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • slaveJobCount : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • slaveJobTries : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tptBindingName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tptPort : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tptStartUpWaitTime : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tptAgent
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          This build step expects to be executed in a job started by an "Execute TPT test cases" build step in master mode. The master job will provide some parameters used by this build step. It will execute excatly one test case and copies the result back to the master node. To execute a single test case the build step uses the TPT RMI API. The Job should be only run once on every Computer. You can achive that e.g. by Throttle Concurrent Builds Plugin
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • exePaths : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tptBindingName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tptPort : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tptStartUpWaitTime : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tricentisCI
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • newTricentisClientPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • newEndpoint : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • configurationFilePath : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify the path to the Tricentis CI test execution configuration XML file. The test configuration file includes more details about which items you would like to execute.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If you use this setting, leave the TestEvents setting of this page empty. Otherwise, this build step fails.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • endpoint : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify the address of the webservice. This component triggers the test execution.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If you execute your tests via Tosca Remote Service, the endpoint needs to point to the TOSCARemoteExecutionService (e.g. http://servername:8732/TOSCARemoteExecutionService/).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If you execute your tests via Tosca Distributed Execution, the endpoint needs to point to the Manager Service of the Tosca Distribution Server (e.g. http://servername:8732/DistributionServerService/ManagerService.svc).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • testEvents : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Input the TestEvents that you want to execute, separated by semicolons. You can identify the TestEvents with their name or their system ID.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This field is optional. It can only be used if you execute your tests via Tosca Distributed Execution.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If you use this setting, leave the Configuration File setting of this page empty. Otherwise, this build step fails.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tricentisClientPath : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Specify the path to the Tricentis CI test execution configuration XML file. The test configuration file includes more details about which items you would like to execute.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If you use this setting, leave the TestEvents setting of this page empty. Otherwise, this build step fails.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'TriggerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • configs
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projects : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A comma separated list of projects to build
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • block
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              When activating this option, triggered builds will be run synchronously. The result of the current build step or the current build can then be controlled using the three following options:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Fail this build step if the triggered build is worse than or equal to: This option takes precedence over the two following ones if its value is not never. In that case, the result of the current build step (that is, success or failure) is based on the result of the triggered builds. If the condition defined for at least one of the triggered build is met, then the build step will be considered as failed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Mark this build as failed if the triggered build is worse than or equal to: This option takes precedence over the next one if its value is not set to never. In that case, the current build will be considered as failed based on the result of the triggered builds and the value of the option.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Mark this build as unstable if the triggered build is worse than or equal to: This option is taken into account if its value is not never. In that case, the build will be considered as unstable based on the result of the triggered builds and the value of this option.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              With this option enabled the builds for the projects triggered are available as Env variables for future build steps:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • LAST_TRIGGERED_JOB_NAME: "Last project started"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • TRIGGERED_JOB_NAMES: "Comma separated list of all triggered projects"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • TRIGGERED_BUILD_NUMBER_<project name>: "Last build number triggered"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • TRIGGERED_BUILD_NUMBERS_<project name>: "Comma separated list of build numbers triggered"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • TRIGGERED_BUILD_RESULT_<project name>: "Last triggered build result of project"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • TRIGGERED_BUILD_RESULT_<project name>_RUN_<build number>: "Result of triggered build for build number"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • TRIGGERED_BUILD_RUN_COUNT_<project name>: "Number of builds triggered for the project"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              All Project names have characters other than a-zA-Z and 0-9 are replaced by "_" (multiple characters are condensed into a single "_").
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • buildStepFailureThreshold : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • unstableThreshold : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • failureThreshold : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • configFactories
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'AllNodesBuildParameterFactory'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Trigger the specified project on every node that's capable of running a build — those that are online and have non-zero executors configured.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'AllNodesForLabelBuildParameterFactory'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This parameter factory defines where the target job should be executed. For each node matching the label a LabelParameter is generated, therefore the target job(s) are triggered for each node with the given label.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If the label does not match any node then exactly one parameter will be generated having the entered label as parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The name of the parameter to set. If there already is a label parameter on the target node, then this name should be the same.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • nodeLabel : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The Label for which the parameters should be generated. For each Node matching the Label a NodeLabelParameter is generated. If no Node matches the Label then the job(s) are triggered with the unaltered Label - the job will therefore just stay in the build queue.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The label can be static or a token to be expanded by the token macro plugin.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • ignoreOfflineNodes : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'BinaryFileParameterFactory'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Look for files that match the specified pattern in the current build, then for each of them trigger a build of the specified project(s) by passing that file as a file parameter.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This implementation does not interpret the contents of those files, and instead it simply gets passed and placed into the workspace of the triggered project(s) under the name specified here.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This is useful, for example, when you have a portion of the job that can be split into concurrently executable subtasks. In such a situation, you can have an earlier step produce subtask work units by packaging necessary stuff into individual files, then use this mode to execute them all in parallel.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • parameterName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • filePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    A GLOB pattern (such as 'foo/**/*.zip') relative to the workspace of this job, which specifies files that are passed to child projects.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • noFilesFoundAction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Values: SKIP, NOPARMS, FAIL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'CounterBuildParameterFactory'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This Parameter Factory generates a sequence of numbers as parameters. More precisely, for each number from From to To with step size Step the Parameters section is evaluated replacing $COUNT with the current number.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For each different number a build of the project(s) is triggered. If the sequence is empty no builds will be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • from : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    From where to count. Build variables will be replaced.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • to : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Count up to including. Build variables will be replaced.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • step : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Increment to use. Build variables will be replaced.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • paramExpr : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    KEY=value pairs, one per line (Java properties file format). Backslashes are used for escaping, so use "\\" for a single backslash.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Current build parameters and/or environment variables can be used in form: ${PARAM} or $PARAM.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The expression $COUNT or ${COUNT} will be replaced with the current count.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • validationFail
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This option determines the behaviour to take if the from,to and step values do not form a valid combination. One that gives a finite number of combinations.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The actions that can be taken are:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Fail the build step This will fail the buildstep with a RuntimeException. (This is the default, and occured in older versions)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Don't trigger these projects This will cause the projects not to be triggered at all for this configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Skip these parameters This will allow the projects to be triggered without these parameters.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Values: FAIL, SKIP, NOPARMS
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'CounterGeneratorParameterFactory'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This ParameterFactory generates a sequence of numbers as parameters. More precisely, for each number from From to To with step size Step the Parameters section is evaluated replacing $COUNT with the current number.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For each different number a build of the project(s) is triggered. If the sequence is empty no builds will be triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • from : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    From where to count. Generator variables will be replaced.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • to : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Count up to including. Generator variables will be replaced.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • step : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Increment to use. Generator variables will be replaced.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • paramExpr : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    KEY=value pairs, one per line (Java properties file format). Backslashes are used for escaping, so use "\\" for a single backslash.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Current generator parameters and/or environment variables can be used in form: ${PARAM} or $PARAM.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The expression $COUNT or ${COUNT} will be replaced with the current count.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • validationFail
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This option determines the behaviour to take if the from,to and step values do not form a valid combination. One that gives a finite number of combinations.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The actions that can be taken are:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Fail the build step This will fail the buildstep with an RuntimeException. (This is the default, and occured in older versions)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Don't trigger these projects This will cause the projects not to be triggered at all for this configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Skip these parameters This will allow the projects to be triggered without these parameters.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Values: FAIL, SKIP, NOPARMS
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'FileBuildParameterFactory'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This Parameter Factory generates parameters based on the contents of the files found.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For each different file found a build of the project(s) is triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • filePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    File wildcard pattern for for finding parameter list files. For example 'Param*.txt' would generate a new configuration for each file that matches the pattern and use the properties defined in each file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • encoding : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Specify the encoding of contents of the files. If not specified, default encoding of the platform is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • noFilesFoundAction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This option determines the behaviour to take if no files are found that match the pattern.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The actions that can be taken are:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Don't trigger these projects This will cause the projects not to be triggered at all for this configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Skip these parameters This will allow the projects to be triggered without these parameters. (This is the default, and occured in older versions)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Fail the build step This will fail the buildstep with a RuntimeException.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Values: SKIP, NOPARMS, FAIL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'FileGeneratorParameterFactory'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This ParameterFactory generates parameters based on the contents of the files found.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  For each different file found a build of the project(s) is triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • filePattern : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    File wildcard pattern for for finding parameter list files. For example 'Param*.txt' would generate a new configuration for each file that matches the pattern and use the properties defined in each file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • noFilesFoundAction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This option determines the behaviour to take if no files are found that match the pattern.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The actions that can be taken are:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Don't trigger these projects This will cause the projects not to be triggered at all for this configuration.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Skip these parameters This will allow the projects to be triggered without these parameters. (This is the default, and occured in older versions)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Fail the build step This will fail the buildstep with an RuntimeException.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Values: SKIP, NOPARMS, FAIL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'MultipleBinaryFileParameterFactory'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • parametersList
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Type: class org.jenkinsci.plugins.parallel_test_executor.MultipleBinaryFileParameterFactory$ParameterBinding
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • noFilesFoundAction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • Values: SKIP, NOPARMS, FAIL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'NodeListBuildParameterFactory'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  This parameter factory defines where the target job should be executed. For each node in the given list, a job is triggered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The name of the parameter to set. If there already is a node parameter on the target node, then this name should be the same.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • nodeListString : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    A comma separated list of nodes to execute the job on. The list can be static or contain tokens to be expanded by the token macro plugin
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • configs
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Array / List of Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'BooleanParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • configs
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    This passes Boolean parameters to the downstream jobs
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • value : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'CurrentBuildParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'FileBuildParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • propertiesFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Comma separated list of absolute or relative paths to file(s) that contains the parameters for the new project. Relative paths are originated from the workspace. The file should have KEY=value pairs, one per line (Java properties file format). Backslashes are used for escaping, so use "\\" for a single backslash.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Current build parameters and/or environment variables can be used in form: ${PARAM} or $PARAM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • encoding : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Specify the encoding of contents of the files. If not specified, default encoding of the platform is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • failTriggerOnMissing : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      When enabled blocks the triggering of the downstream jobs if any of the files are not found in the workspace.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • useMatrixChild : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Use files in workspaces of child builds (that is, builds for each axes combination). This works only when used in publishers of multi-configuration projects. Ignored when used in builders.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • combinationFilter : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Write groovy expression to filter child builds whose files to use. If not specified, uses all children. See Combination Filter of Configuration Matrix for details of groovy expression.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • onlyExactRuns : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Use child builds that is triggered exactly by the parent build. This affects the behavior when you triggered only some of combinations using plugins, you removed some values from axes, and so on.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • textParamValueOnNewLine : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      When enabled properties containing newline character(s) are propagated as TextParameterValue which is a specialized StringParameterValue commonly used for handling multi-line strings in Jenkins. When disabled (default) all properties are propagated as StringParameterValue.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      TextParameterValue and StringParameterValue are typically rendered differently by Jenkins and plugins such as the Rebuild plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • $class: 'GeneratorCurrentParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'GitRevisionBuildParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      This "parameter" passes the SHA1 commit ID that was built by this project into the specified job, and thereby causes the specified job to check out the exact same commit. This is useful to chain multiple activities in a sequence that acts on the same commit in different ways.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • combineQueuedCommits : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This checkbox cause the all revisions to be be ignored apart from the last one if a build is already in the queue.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Does not combine entries with builds of manually started downstream job that are queued. (Ones that do no have a git hash attached to them)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Warning: There is no consideration for multiple branches, or any other behaviour, it is your responsibility to make sure that the hashes provided come from the same branch.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'MatrixSubsetBuildParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • filter : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Specifies the Groovy filter expression that restricts the subset of the combinations that the downstream project will run.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        See the "Combination Filter" field in a matrix project configuration page for more details about the environment the script runs in, examples, and so on.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        What you specify here gets expanded by variables of the triggering build, which allows you to dynamically control the subset of the triggered job. For example, if you trigger job BAR from FOO with label=="${TARGET}" in the filter, and if FOO defines the TARGET variable and FOO #1 sets TARGET to be linux, then the triggered BAR #3 will only select the subset of combinations where label=="linux" holds true.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        Note that the variable expansion follows the ${varname} syntax used throughout in Jenkins, which collides with Groovy string inline expression syntax. However, Jenkins variable expansion leaves undefined variables as-is, so most of the time your Groovy string line expression syntax will survive the expansion, get passed to Groovy as-is, and work as expected. If you do need to escape '$', use '$$'.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'NodeLabelBuildParameter'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This parameter type defines where the target job should be executed, the value must match either a label or a node name - otherwise the job will just stay in the queue. The NodeLabel parameter passed to the target job, does not have to exist on the target job (but if the target has one defined, it should match the name). This way it is possible to trigger jobs on different nodes then they are actually configured.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • nodeLabel : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        The node can be static or a token to be expanded by the token macro plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • $class: 'NodeParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'PredefinedBuildParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • properties : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          KEY=value pairs, one per line (Java properties file format). Backslashes are used for escaping, so use "\\" for a single backslash.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Current build parameters and/or environment variables can be used in form: ${PARAM} or $PARAM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • textParamValueOnNewLine : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          When enabled properties containing newline character(s) are propagated as TextParameterValue which is a specialized StringParameterValue commonly used for handling multi-line strings in Jenkins. When disabled (default) all properties are propagated as StringParameterValue.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          TextParameterValue and StringParameterValue are typically rendered differently by Jenkins and plugins such as the Rebuild plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'PredefinedGeneratorParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • properties : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          KEY=value pairs, one per line (Java properties file format). Backslashes are used for escaping, so use "\\" for a single backslash.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Current build parameters and/or environment variables can be used in form: ${PARAM} or $PARAM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • $class: 'SubversionRevisionBuildParameters'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        This parameter passes the Subversion revisions that were used in this build to the downstream builds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • includeUpstreamParameters : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          This option passes through the subversion parameters that were passed into this build from upstream builds, so that they can be used on downstream projects.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • $class: 'TwitterPublisher'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • tokenCredentialsID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The credentials specifying the token for accessing Twitter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • consumerCredentialsID : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The credentials specifying the consumer for accessing Twitter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • tweetText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The text of the Tweet to publish. Variables can be specified using the ${variablename} syntax.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    The plugin prevents the tweet from being published when a tweet with the same description already exists.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • UiPathAssets
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • assetsAction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • AutoVersion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • CurrentVersion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • DeleteAssets
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • DeployAssets
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Dynamically
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • jobsCount : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • user : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • machine : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • ExternalApp
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • accountForApp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • applicationId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • applicationSecret : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • applicationScope : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • identityUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • CustomVersion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • version : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • NonProduction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Robot
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • robotsIds : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Test
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • TestProject
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • testProjectPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • environments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • TestSet
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • testSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Token
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • accountName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Unattended
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • UserPass
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • orchestratorAddress : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • orchestratorTenant : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • folderName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentials
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • AutoVersion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • CurrentVersion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • DeleteAssets
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • DeployAssets
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Dynamically
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • jobsCount : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • user : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • machine : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ExternalApp
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • accountForApp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • applicationId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • applicationSecret : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • applicationScope : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • identityUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • CustomVersion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • version : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • NonProduction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Robot
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • robotsIds : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Test
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • TestProject
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testProjectPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • environments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • TestSet
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • testSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Token
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • accountName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Unattended
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • UserPass
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • traceLevel
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • Values: None, Critical, Error, Warning, Information, Verbose
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • UiPathPack
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • version
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • AutoVersion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • CurrentVersion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • DeleteAssets
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • DeployAssets
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Dynamically
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • jobsCount : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • user : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • machine : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • ExternalApp
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • accountForApp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • applicationId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • applicationSecret : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • applicationScope : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • identityUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • CustomVersion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • version : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • NonProduction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Robot
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • robotsIds : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Test
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • TestProject
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • testProjectPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • environments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • TestSet
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • testSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Token
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • accountName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Unattended
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • UserPass
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projectJsonPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • outputPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • traceLevel
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Values: None, Critical, Error, Warning, Information, Verbose
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentials (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • AutoVersion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • CurrentVersion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  • DeleteAssets
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    • DeployAssets
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • Dynamically
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • jobsCount : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • user : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • machine : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • ExternalApp
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • accountForApp : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • applicationId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • applicationSecret : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • applicationScope : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • identityUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • CustomVersion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • version : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      • NonProduction
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Robot
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • robotsIds : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • Test
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • TestProject
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • testProjectPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • environments : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • TestSet
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • testSet : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Token
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • accountName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Unattended
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • UserPass
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • credentialsId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • orchestratorAddress : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • orchestratorTenant : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • outputType : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • runWorkflowAnalysis : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • useOrchestrator : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'UnicornValidationBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • unicornUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • siteUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • maxErrorsForStable : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • maxWarningsForStable : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • maxErrorsForUnstable : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • maxWarningsForUnstable : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'UninstallBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • packageId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • failOnUninstallFailure : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'Unity3dBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          For projects that use Unity3d as the build system.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          This causes Jenkins to invoke the Unity3d Editor with the given command line arguments.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          A non-zero exit code from Unity3d makes Jenkins mark the build as a failure.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • unity3dName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • argLine : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The full command line that comes after the executable. Typically something like:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            -quit -batchmode -executeMethod YourEditorScript.YourBuildMethod [-nographics] or
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            -quit -batchmode -buildWindowsPlayer path/to/your/build.exe or
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            -quit -batchmode -buildOSXPlayer path/to/your/build.app

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If this value isn't set, the globalArgLine is used.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Note: we make little to no attempt to detect conflicting arguments or arguments not suitable to the platform neither at configuration nor at runtime.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If the specified command line contains no -projectpath argument, the plugin automatically adds one with the proper parameter (the workspace of the project on the target machine). This is to make sure unity builds the proper project. Otherwise unity would reuse the last opened project. You can override it, but this hasn't been thoroughly tested.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If your build agent have multiple executors (which you should probably do), it is highly recommended to make use of a -logFile argument to avoid letting Unityed write to the standard editor.log concurrently. A recommended practise is to use something like -logFile "$WORKSPACE/unity3d_editor.log".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            See the official Editor command line arguments documentation.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • unstableReturnCodes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • unshelve
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • shelf : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • resolve : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tidy : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ignoreEmpty : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tpAppUpdateFile
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • projectId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • appId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • filePath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tpAppUpdateURL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • projectId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • appId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • applicationUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'UpdateBox'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • cloud : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • workspace : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The workspace in ElasticBox.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • box : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The box in the selected workspace to update.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • variables : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • tpDataSourceUpdate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • projectId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dataSourceId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • filePath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • azureVMSSUpdateInstances
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'UpdatePriority'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • prefix : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Input the relevant project and item id here. Example: P1#I10 (P1 - Project number, I10 - Item number). You can update priority of up to 10 items across projects at a time. Example: P1#I10, P#I11, P#I12, P2#I13
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • priority : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Enter a valid priority name as mentioned in Zoho Sprints. The following operation will not reflect if you enter an invalid priority name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        • $class: 'UpdateProjectBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tpProjectParamUpdate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projectId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • parameterId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • parameterValue : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UpdateReleaseStage'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • releasePrefix : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Enter the release details. Example: P2#R10
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • stage : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Mention the stage to which you want to update your release.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UpdateStatus'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • prefix : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Input the relevant project and item id here. Example: P1#I10 (P1 - Project number, I10 - Item number). You can update status of up to 10 items across projects at a time. Example: P1#I10, P#I11, P#I12, P2#I13
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • status : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Enter a valid status name as mentioned in Zoho Sprints. The following operation will not reflect if you enter an invalid status name. (Or) Enter $STATUS_PARAM to fetch all the status on the sprint board.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tpTestPackageUpdate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projectId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • testPackageId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • filePath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • resolveConflicts : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • updraftPublish
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • url : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Insert the Url, which can be found as part of the "CURL" statement in the Application Overview of the desired application on Updraft.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • path : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UploadAppBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • applicationLocation : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • keystoreInfo
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • keystoreLocation : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • keystorePassword : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • keyAlias : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • keyPassword : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • extraArguments
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • touchId : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • camera : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • allowResign : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • uuid : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Profile to use once installing an iOS Application
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • uniqueName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UploadAppBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • mcServerName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The Mobile Center host address.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • authModel
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • mcUserName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • mcPassword : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • mcTenantId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • mcExecToken : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • value : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • proxySettings
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fsUseAuthentication : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fsProxyAddress : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fsProxyUserName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • fsProxyPassword : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • applicationPaths
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • mcAppPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • uploadCloudifyBlueprint

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use this step to upload a blueprint to Cloudify Manager.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Two paramters are mandatory:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Blueprint ID
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Main blueprint file name

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In addition, exactly one of the following parameters is mandatory:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Blueprint archive path
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Blueprint archive URL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Blueprint's root directory

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If you provide a blueprint's root directory, then the entire directory contents are packaged into a blueprint archive.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • archivePath : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Path (relative to the workspace root) of the blueprint archive.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • archiveUrl : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              URL of the blueprint archive.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • blueprintId : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              ID to assign to the uploaded blueprint.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentialsId : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The ID of the credentials to use when accessing Cloudify. Parameters' expansion is supported when using freestyle jobs.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • mainFileName : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Name of the YAML file containing the main entry point to the blueprint.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • rootDirectory : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Directory where the blueprint is located.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • tenant : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Cloudify tenant to operate on. If left empty, then the default tenant (defined in the plugin's configuration page) will be used.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UploadBuild'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • tenantId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • id : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • versionName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • revision : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • requestor : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • status : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              One of start, in_progress, success, or failure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • startTime : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • endTime : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • appName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • appId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • appExtId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • debug : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • fatal : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Fail build on failed upload (rather than just making build unstable).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • upload-pgyer-v2
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • apiKey : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              To be safe, the field needs to be encrypted, so it looks that long.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              (Required) API Key, used to identify the identity of the API caller,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              if not specified, each interface needs to contain this parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              For the same pgyer registered users, this value is fixed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Click to get pgyer api_key
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • scanDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              (Required) need to upload ipa or apk file base dir path!
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The default is ${WORKSPACE}, It means the path of the current project!
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              It is using ant's DirectoryScanner class, click to see DirectoryScanner class
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              It is equivalent to the parameters of the basedir method in the DirectoryScanner class! click to see basedir method
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • wildcard : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              (Required) need to upload ipa or apk file name, Support wildcards,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              like this: **/Test?/*.apk
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              It is using ant's DirectoryScanner class, click to see DirectoryScanner class
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              It is equivalent to the parameters of the includes method in the DirectoryScanner class! click to see includes method
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              (Optional) App name
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildInstallType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              (Optional)Type of Install, this value is (1,2,3).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              1:Public,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              2:Password,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              3:Restrict.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The default is Public!
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildPassword : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              To be safe, the field needs to be encrypted, so it looks that long.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              (Optional) Setting App installation password.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If you do not want to set a password, please pass on an empty string or do not pass anything.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildUpdateDescription : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              (Optional) Version updated description, please pass on an empty string or do not pass anything.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildChannelShortcut : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              (Optional) The download short link of the specified channel that needs to be updated.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Only one channel can be specified, string type, such as: abcd.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • qrcodePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              (Optional) If you need to download the qrcode,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              please enter the save path of the qrcode!
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              otherwise, not download!
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • envVarsPath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              (Optional) if you need to save info, please enter save file path!
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              otherwise, not save!
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UploadDeployment'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • id : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • tenantId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • result : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              One of start, in_progress, success, or failure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • initiator : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • versionName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • versionExtId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • type : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • environmentId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • environmentName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • description : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • startTime : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • endTime : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • appName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • appId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • appExtId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • debug : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • fatal : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Fail build on failed upload (rather than just making build unstable).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UploadJUnitTestResult'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • properties
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Type: java.util.Map<java.lang.String, java.lang.String>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UploadMetricsFile'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • tenantId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • name : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • filePath : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • testSetName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • environment : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • combineTestSuites : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • fatal : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Fail build on failed test upload (rather than just making build unstable).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • debug : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • pluginType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • dataFormat : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • recordName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • metricDefinitionId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • metricsRecordUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • description : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • executionDate : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Time of execution that produced test results. Should be in Epoch milliseconds. Defaults to current time.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • buildUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • appId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • appName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • appExtId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • uploadProgetPackage
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Creates and uploads a universal ProGet package to your ProGet server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • feedName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The feed in ProGet to upload the package to
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • groupName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The package you wish to upload your package to.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A string of no more than fifty characters:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • numbers (0-9)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • upper and lower-case letters (a-Z)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • dashes (-)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • periods (.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • forward-slashes (/)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • and underscores (_)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • may not start or end with a forward-slash
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              e.g. an/example/group

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • packageName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The package you wish to upload your package to.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A string of no more than fifty characters:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • numbers (0-9)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • upper and lower-case letters (a-Z)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • dashes (-)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • periods (.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • and underscores (_)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              e.g. mypackage

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • version : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A string representing a Semantic Version; this plug-in will not do any validation that the version is correct, however ProGet will return an error and the task will fail if the version number is not correctly formatted.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • artifacts : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              You can use wildcards like 'module/dist/**/*.zip'. See [the includes attribute of Ant fileset](http://ant.apache.org/manual/Types/fileset.html) for the exact format.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Multiple patterns can be specified by placing a comma (,) between them
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • The base directory is the workspace. You can only archive files that are located in your workspace
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Will fail the build if no files are found

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Removing Unwanted Folders
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Top level folders can be excluded from the package using a custom addition to the Ant fileset - wrapping unwanted folder names in square brackets ([ ]):

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • filter must start with '['
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • wildcards are not supported
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • filter can span a several folders
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • invalid filters are ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • can be used with multiple filesets
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • "[build]/sample/one.txt" would add the folder and file "sample/one.txt" to the package
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • "[build/sample]/two.txt" would add the file "one.txt" to the package
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • "build/[sample]/three.txt" would be ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • "[**]/four.txt" would be ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • "[one]/one.txt, [two]/two.txt" would add one.txt and two.txt to the package

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • caseSensitive : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Artifact archiver uses Ant org.apache.tools.ant.DirectoryScanner which by default is case sensitive. For instance, if the job produces *.hpi files, pattern "**/*.HPI" will fail to find them.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              This option can be used to disable case sensitivity. When it's unchecked, pattern "**/*.HPI" will match any *.hpi files, or pattern "**/cAsEsEnSiTiVe.jar" will match a file called caseSensitive.jar.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • defaultExcludes : boolean (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • dependencies : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              An array of strings, each consisting of a package identification string; this string is formatted as follows:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • �group�:�package-name�
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • �group�:�package-name�:�version�
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              When the version is not specified, the latest is used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • description : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A string containing any number of charters; these will be formatted as Markdown in the ProGet UI
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • excludes : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Optionally specify the 'excludes' pattern, such as "foo/bar/**/*". A file that matches this mask will not be archived even if it matches the mask specified in 'files to package' section.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • icon : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A string of an absolute url pointing to an image to be displayed in the ProGet UI (at both 64px and 128px); if package:// is used as the protocol, ProGet will search within the package and serve that image instead
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • metadata : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Custom metadata in 'key = value' pairs, each key/value pair must be on it's own line so for more than one entry you will need to expand the entry field. Each key must be unique. Each value must be no more than 50 characters.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If you need to add additional metadata, it's strongly recommended that you prefix these properties with an underscore (_) on the off-chance that a property you add will exist in a future version of the specification.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • title : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              An optional title for your package

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A string of no more than fifty characters

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • uploadCloudifyBlueprint
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use this step to upload a plugin to Cloudify Manager.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • credentialsId : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The ID of the credentials to use when accessing Cloudify. Parameters' expansion is supported when using freestyle jobs.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • outputLocation : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Location where the plugin information, in JSON format, will be stored.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • tenant : String (optional)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Cloudify tenant to operate on. If left empty, then the default tenant (defined in the plugin's configuration page) will be used.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • wagonLocation : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              URL of the Wagon file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • yamlLocation : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              URL of the plugin.yaml file of the plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UpmergeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • commitUsername : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              User name in format: "Foo Bar ". Required.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • uTesterUrlListTask
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • initialUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A list of URLs (one per line) to check.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • urlsWhiteList : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A list of URLs (one per line) to whitelist.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • rulesList
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              A list of JSON rules to evaluate.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Array / List of Nested Object
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • rule : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • complianceMinimum : float
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The minimum compliance level needed to pass (if multiple data results exist this will check each).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • allowSimultaneousLogins : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • loginFlowJson : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • useRunner : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • fetchResponseTimeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The number of seconds to wait for a response from the User1st API before failing (default of 120).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • useMango
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • useSlaveNodes : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Select this option to run tests in parallel across labelled nodes. Nodes need to have a Windows OS with useMango installed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              If this option is not selected or the Label Expression is empty, tests will be executed on the Jenkins master node only. This assumes the master has a Windows OS with useMango installed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Tip: For running useMango tests, we recommend adding the label 'usemango' to all your useMango Windows slave nodes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • nodeLabel : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projectId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The name of your useMango project containing the tests to be executed (Note: This field is mandatory).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • tags : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Execute tests with these given project tags. Separate the tags with a comma, e.g. Tag1,Tag2 (Note: This field is not mandatory. Leaving it empty will include all the tests in the project).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • testName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Execute tests with a given name (regular expressions supported). If a folder name is specified only matching tests within this folder will be used (Note: This field is not mandatory. Leaving it empty will include all tests).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • testStatus : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Execute tests with a specific status (Note: This field is not mandatory. Leaving it empty will include tests with all statuses).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • assignedTo : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Execute tests assigned to a specific user (Note: This field is not mandatory. Leaving it empty will include tests from all users).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • vb6
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • projectFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • compileConstants : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Tells Visual Basic which values to use for conditional compilation constants when making an .EXE or ActiveX component with the /make switch. Separate multiple constants with colons. Example: Conditional=1:AnotherConditional=0:More=1
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • outDir : String (optional)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Specifies a directory path to place all output files in when using /make. This path must already exist.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • vCommander
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • action
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Nested Choice of Objects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'VCommanderRequestNewServiceAction'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • payload : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  When you lookup a service that exists in the Commander Service Catalog, the request configured for that service is displayed in this field as a JSON payload. For some service requests you may edit configuration parameters. If you edit a service request's configuration parameters, you must use valid values for each configuration parameter and proper JSON formatting. Parameter validation is not performed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  You may also use environment variables in the text. Regular Jenkins syntax will be used to resolve the variables - either $xyz, ${xyz} or ${a.b} but not $a.b, while ignoring "$".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • sync : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Commander actions may take a few minutes to complete. If you want Jenkins to wait for the service to complete (that is, perform the action synchronously), you can add timeout and checking intervals in the current build step. You can also add them in a separate, following wait step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • polling : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'VCommanderRunWorkflowAction'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • targetType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Select the target type to run the workflow on. The target type and name must be a unique in Commander.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  You may also use environment variables in the text. Variables must resolve to valid target types. Regular Jenkins syntax will be used to resolve the variables - either $xyz, ${xyz} or ${a.b} but not $a.b, while ignoring "$".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • targetName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Enter the name of the target to run the workflow on. The target type and name must be a unique in Commander.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  You may also use environment variables in the text. Regular Jenkins syntax will be used to resolve the variables - either $xyz, ${xyz} or ${a.b} but not $a.b, while ignoring "$".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • workflowName : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • sync : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Commander actions may take a few minutes to complete. If you want Jenkins to wait for the action to complete (that is, perform the action synchronously), you can add timeout and checking intervals in the current build step or you add them a separate wait step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • polling : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'VCommanderWaitForRequestNewServiceAction'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • requestId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If you want the build job to wait for the completion of a service request, enter the service request's ID. Typically the wait will be for an asynchronous request made earlier in the same build. In that case, the build step will generate the environment variable VCOMMANDER_REQUESTED_SERVICE_ID, which can be used here.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  You may also use environment variables in the text. Regular Jenkins syntax will be used to resolve the variables - either $xyz, ${xyz} or ${a.b} but not $a.b, while ignoring "$".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • polling : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • $class: 'VCommanderWaitForRunWorkflowAction'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • taskId : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  If you want the build job to wait for the completion of a command workflow task, enter that task's ID. Typically the wait will be for an asynchronous command workflow task made earlier in the same build. In that case, the build step will generate the environment variable VCOMMANDER_WORKFLOW_TASK_ID, which can be used here.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  You may also use environment variables in the text. Regular Jenkins syntax will be used to resolve the variables - either $xyz, ${xyz} or ${a.b} but not $a.b, while ignoring "$".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • timeout : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                • polling : long
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VMGRAPI'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • vAPIUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              vManager expose a REST API interface for API. The REST API is a dedicated process for serving remote http requests - vAPI.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Starting 14.1 s005 The vAPI process is served automatically by the vManager Server process, and as such you need to supply the following url:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              https://[VMANAGER_HOST:VMANAGER_PORT]/vmgr/vapi
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              For vmanager 14.1 s002, the vAPI process need to get started manually, as such, the url syntaxt is:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              http://[VAPI_HOST:VAPI_PORT]/vmgr

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • vAPIUser : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              In case of a secure mode, the userId (vAPI User) will be shown as the user who perform the operation within vManager tool.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              In case of open mode, the default userid that will be used is "vapi".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • vAPIPassword : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              In case of a secure mode, the vAPI Secret Key is needed
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              vAPI Secret Key can be set for each vAPI process. Please contact vAPI documentation for further info.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • vAPIInput : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • vJsonInputFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              In case of a need in dynamically change the jSON input for the API per job, the pre-job should place into the workspace directory a file with the relevant jSON string to be sent to the vAPI.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              The input file should be place into the working directory. In case this field is empty, The file name need to be: ${BUILD_NUMBER}.${BUILD_ID}.vapi.input
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Please fill this field only in case, you want to hard code the input file name, to be consist across all builds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • deleteInputFile : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • authRequired : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              vManager vAPI can operate in one of two modes:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Secured by user/secret key
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Open
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • In case of a secure mode, the userId (vAPI User) will be shown as the user who perform the operation within vManager tool.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              In case of open mode, the default userid that will be used is "vapi".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • apiType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dynamicUserId : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need in dynamically selecting the user name per job, the pre-job should place into the workspace directory a file with single line that contains the userid to be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The file name should be: ${BUILD_NUMBER}.${BUILD_ID}.user.input"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The job will pick the userid which is in the file, and connect to vAPI using this userid and the vAPI secret key.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • apiUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This is the acctual URL of the API
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • /severe_messages /count
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • /severe_messages /get
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • /sessions /count
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • /sessions /launch
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • /sessions /get
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • /runs /compact
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • /runs /update

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Please see the full API list at http://[vAPI HOST]:[vAPI PORT]/vmgr/rest/$docs

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please note that the output of the API call will get saved as jSON format into the workspace at ${BUILD_NUMBER}.${BUILD_ID}.vapi.output
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • requestMethod : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • advConfig : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • connTimeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Connection Timeout is the time (in minutes) for the Jenkins executor to wait till it establish a connection with the vManager server. It is usually very fast, so no need to change the default (1 minute).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Setting the time to 0 means an unlimited time. In case it is taking too long to establish a connection, and the time passed is more than the Connection Timeout set, the connection to the vManager server will be closed, and the Jenkins executor will be able to continue. The vAPI operation will fail (it will not start), and the build will be marked as failed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If no Connection timeout is set, the default is 1 minutes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • readTimeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Read Timeout is the time (in minutes) for the Jenkins executor to wait for vManager server to end the current operation. In heavy operations such as collect compact or ranking, the time to response back can vary, and might even take an hour or so depends on the load the vManager server is experiencing.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Setting the time to 0 means an unlimited time. In case the vAPI call is taking too long, and is more than the Read Timeout set, the connection to the vManager server will be closed, and the Jenkins executor will be able to continue. The vAPI operation will not fail, but the build will be marked as failed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If no Read timeout is set, the default is 30 minutes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VMGRLaunch'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • deleteInputFile : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • deleteCredentialInputFile : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • useUserOnFarm : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • authRequired : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            vManager vAPI can operate in one of two modes:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Secured by user/secret key
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Open
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • In case of a secure mode, the userId (vAPI User) will be shown as the user who perform the operation within vManager tool.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of open mode, the default userid that will be used is "vapi".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • vsifType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • userFarmType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dynamicUserId : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need in dynamically selecting the user name per job, the pre-job should place into the workspace directory a file with single line that contains the userid to be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The file name should be: ${BUILD_NUMBER}.${BUILD_ID}.user.input"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The job will pick the userid which is in the file, and connect to vAPI using this userid and the vAPI secret key.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • advConfig : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • connTimeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Connection Timeout is the time (in minutes) for the Jenkins executor to wait till it establish a connection with the vManager server. It is usually very fast, so no need to change the default (1 minute).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Setting the time to 0 means an unlimited time. In case it is taking too long to establish a connection, and the time passed is more than the Connection Timeout set, the connection to the vManager server will be closed, and the Jenkins executor will be able to continue. The vAPI operation will fail (it will not start), and the build will be marked as failed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If no Connection timeout is set, the default is 1 minutes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • readTimeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Read Timeout is the time (in minutes) for the Jenkins executor to wait for vManager server to end the current operation. In heavy operations such as collect compact or ranking, the time to response back can vary, and might even take an hour or so depends on the load the vManager server is experiencing.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Setting the time to 0 means an unlimited time. In case the vAPI call is taking too long, and is more than the Read Timeout set, the connection to the vManager server will be closed, and the Jenkins executor will be able to continue. The vAPI operation will not fail, but the build will be marked as failed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If no Read timeout is set, the default is 30 minutes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • envVarible : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • envVaribleFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Supported by vManager 15.1 and above only
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need in adding the vsif environment variables, the pre-job should place into the workspace directory a file with a list of relevant environment variables in json keys format.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "MY_REGRESSION_AREA": "/home/dan/regression",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "MY_DUT" : "top"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (Note the comma separator at the end of each line, to exclude the last line.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The input file should be place into the working directory. In case this field is empty, The file name need to be: ${BUILD_NUMBER}.${BUILD_ID}.environment.input
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please fill this field only in case, you want to hard code the input file name, to be consist across all builds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • inaccessibleResolver : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The following setup allow you to select how the build will behave in each of the state where the session stop from running.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Continue
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case you select to continue, the build will assume (on the chosen state) for a given session that it can continue and finish the wait on this specific session.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please note that in case there are multiple sessions that are being executed by this step, the build will wait till all sessions got into a state that allow it to continue.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Ignore
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case you select to continue, the build will assume (on the chosen state) for a given session that it can ignore the chosen state and keep waiting for other state (until get the 'completed' state).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Fail
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case you select to fail, the build will assume (on the chosen state) for a given session that it should mark this build as a failure build. Note: If you have multiple sessions on this build step, it is enough for one single session to be marked as 'failed' in order to mark the entire build as a failed build.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Other Waiting Considerations
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            1. When all sessions on this build step are having the state 'completed' the build will be marked as success.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            2. When the vManager server goes down, the build step will keep waiting till the server will go back up. The build step will only change its state based on sessions state changes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            3. If the session was manually deleted on the vManager server, before reaching into final state, the build will be marked as a failure build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            4. In any case, if the number of minutes waiting is bigger than the timeout set here, the build will marked as a failed build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • stoppedResolver : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • failedResolver : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • doneResolver : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • suspendedResolver : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • waitTillSessionEnds : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • stepSessionTimeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • generateJUnitXML : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • extraAttributesForFailures : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • staticAttributeList : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • markBuildAsFailedIfAllRunFailed : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • failJobIfAllRunFailed : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • envSourceInputFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Supported by vManager 17.10 and above only
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need in adding environment variables per user for the regression time post vsif parsing stage, users can create a list of aliases and store them within a file. The job will 'source' that file prior of reading the vsif.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Note that this can also serve for any pre stage execution, not just for aliases.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Relative path is also supported (aka ~/doSomething.sh).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Script must be in bash or csh.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The file should be place into a directory with a read permission for the user who launches the regression.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case this field is empty, this field is ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • vMGRBuildArchive : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • deleteAlsoSessionDirectory : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Choosing to delete vManager session during build removal, will trigger an operation during manual/automatic deletion of a build, to deal with the remote session/sessions that were created during that build on the vManager DB.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            When this option is enabled the build will place an instruction file (sdi.properties) within the job directory that specify the sessions to get deleted, as well as other parameters - that will be used during the delete operation.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Builds that runs while this option is turned off, will not get effected during removal, and will keep their sessions.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            You can choose between two methodologies:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Sync Delete Methodology (built-in)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case you select the sync methodology, the plugin will call vManager vAPI during the build removal process for deleting the sessions that were created during that same build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            With this option you can also supply a generic user/password to be used for the delete operation, otherwise, the same user that was used during the build will be picked automatically.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please note that the sync methodology is lacking two main aspects:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            1. Since Jenkins ignores any exception thrown within the callback functions of RunListener, the build will get deleted even if the session failed to get deleted from vManager DB.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            2. When the vAPI is down, it can take up to 20 seconds to finish the operation (as it needs to wait till vAPI will be available) - the UX at that time, might appear sluggish to the end user.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Async Delete Methodology (externally)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case you want to introduce a more robust approach (promise session deletion even if vManager Server is down, as well as faster UX), you should use the async methodology.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            When Async Methodology is used, the callback function will not try to delete the session, but instead will copy the sdi.properties file into an external location of your choice.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            You should create an additional job, one that is triggered every 1 minute for scanning that directory (and trying to delete the relevant sessions within these sdi files). To exclude the copy of the sdi files during build removal, this flow is not managed by the plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please note - defining an external directory location (in windows) requires the use of forward slash instead of backslash.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • genericCredentialForSessionDelete : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • archiveUser : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • archivePassword : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • famMode : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • famModeLocation : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • noAppendSeed : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • markBuildAsPassedIfAllRunPassed : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • failJobUnlessAllRunPassed : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • userPrivateSSHKey : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attrValues : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attrValuesFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Supported by vManager 17.1 and above only
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need in setting the vsif attribute values, the pre-job should place into the workspace directory a file with a list of relevant attributes and their values (one line per each attribute) in the following format.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Line 1: attribute_name,attribute_value,attribute_type
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Line 2: attribute_name,attribute_value,attribute_type

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            attribute type can be 1 of 3:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            P_SESSION for session type attributes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            P_TEST for test type attributes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            P_GROUP for group type attributes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            home_location,/home/dan/regression,P_SESSION
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            owner,dan,P_TEST
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (Note the comma separator within the lines. Do not place comma at the end of the lines.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The input file should be place into the working directory. In case this field is empty, The file name need to be: ${BUILD_NUMBER}.${BUILD_ID}.attr.values.input
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please fill this field only in case, you want to hard code the input file name, to be consist across all builds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • executionType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sessionsInputFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This option is useful for those who wish to take benefit of their own environment and scripts for launching sessions using batch, but still want the benefit of having the Job waiting for the execution to end, generates JUnit report, produce triage link, real time view of the run's progress, summary report, etc'.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This option is also useful for those who wish to take advantage of this plugin, but are not using the vManager Runner, and uses "collect" mode instead. For such flow they can still benefit from generated JUnit report, triage link, real time view of the run's progress, summary report, etc'.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In this option, there is an assumption that a pre-step (usually from shell type) is taking over the session launch operation (or collect), and as such, in order for this plugin to continue monitoring those sessions - the session names need to be exchange between the shell step and this step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need to launch the sessions using batch as a pre-step to this one (or collect), the pre-step should place into the workspace directory a file with the session or session names that were launched/collected - new line for each session name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The input file should be place into the working directory. In case this field is empty, The file name need to be: ${BUILD_NUMBER}.${BUILD_ID}.sessions.input
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please fill this field only in case, you want to hard code the input file name, to be consist across all builds.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            the vManager plugin will look for any of the input files mentioned above, and query the server for their respective id automatically. From that point and on, the flow continues as if the sessions were launched/collected by this plugin.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The output of all IDs of the launched/collected sessions can be found at: ${BUILD_NUMBER}.${BUILD_ID}.session_launch.output
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • deleteSessionInputFile : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • envVariableType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • envVariableText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Supported by vManager 15.1 and above only
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need in adding the vsif environment variables, you can supply here a list of relevant environment variables in json keys format.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "MY_REGRESSION_AREA": "/home/dan/regression",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "MY_DUT" : "top"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (Note the comma separator at the end of each line, to exclude the last line.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attrVariableType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attrVariableText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Supported by vManager 17.1 and above only
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need in setting the vsif attribute values, you can use this text area for giving a list of relevant attributes and their values (one line per each attribute) in the following format.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Line 1: attribute_name,attribute_value,attribute_type
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Line 2: attribute_name,attribute_value,attribute_type

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            attribute type can be 1 of 3:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            P_SESSION for session type attributes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            P_TEST for test type attributes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            P_GROUP for group type attributes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            home_location,/home/dan/regression,P_SESSION
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            owner,dan,P_TEST
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (Note the comma separator within the lines. Do not place comma at the end of the lines.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • pauseSessionOnBuildInterruption : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • envSourceInputFileType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • executionScript : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Start your session from shell using batch, and continue monitoring from vAPI
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case you need to launch your session using batch first, please create a wrapper script that gets as an input the vSIF full path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The plugin will execute your script on the selective agent (Jenkins) and will extract the session name out of it.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The plugin will then use that session_name to keep monitor your execution.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Example for such script file can be:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ---------------------------
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            #!/bin/csh

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            source ~/.cshrc

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            setenv VMGR_REGION default
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            setenv VMGR_REGION_ROUTE_POLICY LOCAL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            setenv VMGR_USER some_user_id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            setenv VMGR_PASSWORD XXXXXX

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            vmanager -execcmd "launch $1"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ---------------------------

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please also make sure that
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            1) The path to the script is a full path. No shortcuts or relative paths are allowed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            2) The shell type (bash, csh, sh) is supplied with full path as well.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            3) This mode can only be used with an Agent that runs on Linux.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • executionShellLocation : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • executionVsifFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • defineVaribleFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need in setting the vsif define values, the pre-job should place into the workspace directory a file with a list of relevant defines and their values (one line per each definition) in the following format.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Line 1: define_name,define_value
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Line 2: define_name,define_value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            REG_MODE,sanity
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            SESSION_NAME,my_session
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (Note the comma separator within the lines. Do not place comma at the end of the lines.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The input file should be place into the working directory. In case this field is empty, The file name need to be: ${BUILD_NUMBER}.${BUILD_ID}.define.input
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please fill this field only in case, you want to hard code the input file name, to be consist across all builds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • defineVarible : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • defineVariableType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • defineVariableText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need in setting the vsif define values, you can use this text area for giving a list of relevant defines and their values (one line per each attribute) in the following format.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Line 1: define_name,define_value
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Line 2: define_name,define_value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            REG_MODE,sanity
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            SESSION_NAME,my_session
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (Note the comma separator within the lines. Do not place comma at the end of the lines.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VSphereBuildStepContainer'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VaddyPlugin'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VagrantDestroyCommand'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VagrantProvisionCommand'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VagrantSshCommand'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VagrantUpCommand'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ValgrindBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • crxValidate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Validate that content packages in the workspace conform to restrictions on the scope of their WorkspaceFilter and on the types of embedded files. Use this to enforce security policies to prevent developers from deploying content or code through continuous integration.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Only package files with .zip or .jar extensions will be identified and deployed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Validator'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • contentReplace
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VectorCASTCommand'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VectorCASTSetup'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ViberNotifier'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ViewCloner'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VirtualenvBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • visualexpert
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Visual Expert builder facilitates to Analyze Project, Generate Reference Documentation and Generate Code Review Documentation for Visual Expert Projects.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VsCodeMetricsBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • vsTest
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WASBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • greet
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WakeUpIOSDevice'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Wakes up tethered iOS devices, and automatically opens Mobile Safari to the most recent URL. This can be used to "prep" devices before running tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WallarmFastBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WarriorPluginBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • wattspeed
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WebLoadAnalyticsBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WebLoadConsoleBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WildflyBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WinBatchBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WinDocksBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • winRMClient
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WixToolsetBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WsapBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • xcodeBuild
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'XFramiumBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'XLRVarSetterBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • osfBuilderSuiteXMLLint
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'XShellBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'XrayExportBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'XrayImportFeatureBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This Build Step can be used to import existing Cucumber Tests into Xray Tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • yarn
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ZAPBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • zAdviserDownload
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • zAdviserUpload
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ZOSJobSubmitter'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ZanataCliBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Experimental feature - this is experimental and subject to change without notice.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ZanataSyncStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use this build step to perform standard Zanata push and pull. If you need to use advanced Zanata CLI options, Jenkins admin can configure Zanata CLI installation under global tools. Then select the installation in the job configuration. You can then use it in shell.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ZapRunner'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • zulipSend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • cfyCloudFormation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.alauda.jenkins.plugins.freestyle.CreateStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.alauda.jenkins.plugins.freestyle.DeleteStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.alauda.jenkins.plugins.freestyle.RawStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.alauda.jenkins.plugins.freestyle.WatchStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.cloudbees.dockerpublish.DockerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Build and push your Docker based project to the Docker registry. Builds the Dockerfile present in the workspace root or in the directory specified and pushes it to the Docker registry.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.cloudbees.plugins.deployer.DeployBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.etas.jenkins.plugins.CreateTextFile.CreateFileBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.groupon.jenkinsci.plugins.DotCiFigtemplate.HelloWorldBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • azureVMSSUpdate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.openshift.jenkins.plugins.freestyle.CreateStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.openshift.jenkins.plugins.freestyle.DeleteStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.openshift.jenkins.plugins.freestyle.RawStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.openshift.jenkins.plugins.freestyle.WatchStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.syncapse.jenkinsci.plugins.awscloudformationwrapper.CloudFormationBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.synopsys.integration.jenkins.coverity.extensions.buildstep.CoverityBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • vdooScan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'iOSAppInstaller'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Silently installs the specified iOS app (.ipa file) on tethered iOS devices.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'iOSSimulatorLauncher'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dotnetRestore
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The dotnet restore command uses NuGet to restore dependencies as well as project-specific tools that are specified in the project file. In most cases, you don't need to explicitly use the dotnet restore command, since a NuGet restore is run implicitly if necessary when you run the following commands:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Sometimes, it might be inconvenient to run the implicit NuGet restore with these commands. For example, some automated systems, such as build systems, need to call dotnet restore explicitly to control when the restore occurs so that they can control network usage. To prevent the implicit NuGet restore, you can use the --no-restore flag with any of these commands to disable implicit restore.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (see also: Microsoft Documentation)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dotnetToolRestore
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The dotnet tool restore command finds the tool manifest file that is in scope for the current directory and installs the tools that are listed in it. For information about manifest files, see Install a local tool and Invoke a local tool.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (see also: Microsoft Documentation)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'io.jenkins.plugins.immuniweb.ScannerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • upload-sonic
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'jenkins.plugins.coverity.CoverityBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            How to configure the Coverity Build Step

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The build step can be configured as any other build steps. Choose the appropriate builder and configure the command to be performed. The configured build step will be wrapped with the Coverity cov-build executables so that it captures the build and can be used to further analysis by using coverity static tools. This build step is only for capturing build of compiled sources.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'org.jenkinsci.plugins.dockerbuildstep.DockerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'org.jenkinsci.plugins.ios.connector.DeployBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Deploy iOS aplications to any iOS devices USB-tethered in any of the Jenkins slaves.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'org.jenkinsci.plugins.liquibase.builder.UpdateBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • osfBuilderSuiteForSFCCDeploy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • greet
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'org.quality.gates.jenkins.plugin.QGBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Quality Gates Plugin will fail the build whenever the Quality Gates criteria in the Sonar analysis aren't met
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • (the project Quality Gates status is different than "Passed")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'quality.gates.jenkins.plugin.QGBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Quality Gates Plugin will fail the build whenever the Quality Gates criteria in the Sonar analysis aren't met
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • (the project Quality Gates status is different than "Passed")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • upload-pgyer

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            click to get the documents

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'vRABlueprintBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'vRADeploymentBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ConditionalBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ConfigFileBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Make globally configured files available in your local workspace. All files configured via the config-file-provider plugin are available and can be referenced.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ConfluenceReleaseNotesPublisher'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ConsulBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ConsulKVBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • assessContainerImage
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • contentReplace
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ContinuousReleaseProperties'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CoordinatorBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Add/Remove node, add/remove jobs, rename, check, right click to switch on Serial or Parallel pattern and have fun!
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CopadoBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • copyArtifacts
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CreateBaselineBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Set the current state of your schema as the baseline to detect any changes that has been made into the schema since now.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CreateBuildBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Creates a new build for the selected BuildMaster application and sets the BUILDMASTER_BUILD_NUMBER environment variable with the value returned from BuildMaster for the new build.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If your Jenkins job has produced artifacts to be loaded into BuildMaster, you have the following options. The choice is largely dependent on how you import the build artifacts into BuildMaster:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            1. Use BuildMasters Jenkins Extensions 'Jenkins::Import-Artifact' statement to import artifacts directly from Jenkins: the post build action is required
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            2. Use BuildMasters 'Create-Artifact' statement to import files from a folder that you've placed the artifacts into from the Jenkins build (eg using ArtifactDeployer Plugin): either the post build or build step actions will be fine
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            3. Use an external artifact repository such as Nexus, Artifactory or ProGet: either the post build or build step actions will be fine
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CreateCustomTaskrun'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • createCloudifyEnv

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Creates a topology from an environment blueprint.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The "Output File" parameter denotes where the new environment's outputs will be written to. Later build steps can inspect this file in order to grab information pertinent to them (such as IP addresses, user names and so forth).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            All input fields support standard Jenkins parameters' expansion. For example, the string ${app_name} will be expanded, in runtime, to the value of a build parameter called app_name .

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For explanation about the format of the outputs file, refer to the help tooltip for that parameter.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CreateFingerprint'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Create Fingerprints of specified files during a build process

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CreateRelease'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CreateSnapshotBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Save your database schema to a file to have the possibility to return to it any time later.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • createTag
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • createTask
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CreateTemplate'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CriticalBlockEnd'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Release all resources that Critical block start had allocated for this job.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CriticalBlockStart'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Delimit the beginning of the exclusion zone. All build steps that follow will be managed by exclusion plugin.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CucumberSlackBuildStepNotifier'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CustomPythonBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'CxScanBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • DASTScan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • osfBuilderSuiteForSFCCDataImport
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DaticalDBBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • daticalDBCmdProject : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The Datical DB Command is the fully qualified location of the Datical DB CLI command. It will override the Global Datical DB Command. This is typically not needed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This should be a fully qualified file path such as C:\DaticalDB\repl\hammer.bat or /opt/DaticalDB/repl/hammer.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • daticalDBExportSQL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            When checked for Deploy and Forecast actions, Datical DB will export SQL to be run against the target server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • daticalDBExportRollbackSQL : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            When checked for Deploy and Forecast actions, Datical DB will export Rollback SQL to be run against the target server. When checked for Rollback, will only export SQL and NOT perform a Rollback.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • daticalDBScriptDir : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The Datical DB Script Directory is the fully qualified location of the Datical DB Scripts.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This should be a fully qualified file path such as file:/C:\DaticalDB\repl\scripts or /opt/DaticalDB/repl/scripts.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • debianPbuilder
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • runAutomationHubBuild
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dotnetNuGetDelete
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The dotnet nuget delete command deletes or unlists a package from the server. For nuget.org, the action is to unlist the package.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (see also: Microsoft Documentation)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DeleteApplication'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • deleteCloudifyBlueprint
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use this step to delete a Cloudify blueprint from Cloudify Manager.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • deleteComponents
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • deleteCloudifyEnv
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Deletes a Cloudify environment.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DeleteEnvironmentBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DeleteRaw'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DeleteVirtualizeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dependencyCheck
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DeployApplication'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This plugin creates a container on the OpenShift PaaS and deploys the application into the container.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DeployBox'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • samDeploy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • crxDeploy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Deploy CRX Content Package files from the workspace to a configured Adobe Granite repository via the CRX Package Manager.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Only package files with .zip or .jar extensions will be identified and deployed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DeployPromotionBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DeployScriptBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Execute any arbitrary SQL script on a selected database.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • buildMasterDeployBuildToStage

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Deploys (or re-deploys) a build to a particular stage.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Note: that when used in a pipeline step that the applicationId, releaseNumber, and buildNumber fields are required:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            buildMasterDeployBuildToStage(applicationId: BUILDMASTER_APPLICATION_ID, releaseNumber: BUILDMASTER_RELEASE_NUMBER, buildNumber: BUILDMASTER_BUILD_NUMBER)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Deployer'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • addDeployToDashboard
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DeploymentBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DescribeWithParamsBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DescriptionSetterBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This plugin automatically sets a description for the build as a step during building.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            A description can be based on the log output (by searching it using a regular expression), or it can be hardcoded.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The description is exposed as DESCRIPTION_SETTER_DESCRIPTION environment variable

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DevOpsCreateArtifactPackageBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DevOpsRegisterArtifactBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • devSpacesCreate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • svCreateAndDeployVirtualService

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Create and deploy Virtual Service from VSI/VSM, RR Pairs, or the following specifications: Swagger, WSDL, or RAML.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • svDeployTest

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Deploys and starts CA DevTest test or test suite provided as a .mar file.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Throws exception if .mar file is incorrect, authorization to CA DevTest fails or connection to CA DevTest cannot be established.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • svDeployVirtualService

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Deploys and starts virtual service provided as a .mar file to target VSE. More services could be provided using comma or newline separator.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Throws exception if .mar file is incorrect, virtual service is already deployed, authorization to CA DevTest fails or connection to CA DevTest cannot be established.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • svStartVirtualService

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Starts virtual service that is already deployed on target VSE. More services could be started using comma or newline separator.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Throws exception if virtual service does not exist on specified VSE, authorization to CA DevTest fails or connection to CA DevTest cannot be established.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • svStopVirtualService

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Stops virtual service that is running on target VSE. More services could be stopped using comma or newline separator.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Throws exception if virtual service is not running on specified VSE, authorization to CA DevTest fails or connection to CA DevTest cannot be established.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • svUndeployVirtualService

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Undeploys (removes) virtual service from specified VSE. More services could be provided using comma or newline separator.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Throws exception if virtual service does not exist on specified VSE, authorization to CA DevTest fails or connection to CA DevTest cannot be established

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • importDeveloperProfile
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DiawiUploader'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dingtalk
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DistTestingBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The goal of this plugin is to enable a distributed testing of some compiled classes on multiple nodes. Tests are send one by one to nodes in the label specified for the project and run. Test results are saved in the "results" directory in the project workspace. f.e. "TEST-helloword.HelloTest.xml" for the test class "helloworld.HelloTest".

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This plugin suppose that all slaves in the specified label have a shared workspace directory. (like NFS)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Only classes in the "Tests classes directory" directory with a file name containing a "test" substring (case insensitive) are automatically found by this plugin and run.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If you enable "Publish JUnit test result report" in the "Post-build Actions" section and type "results/*.xml" you will see test results in the Hudson's web UI.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Only nodes in a label which were specified for this project ("Tie this project to a node") will be used for distributed testing. This label must contain at least 2 nodes.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            It's possible let this plugin to compile tests class sources which were checkout from a repository if "Compile tests" checkbox was checked. Remember to provide all necessary libraries needed for compilation.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            It's possible to check a "Wait for nodes which are busy" checkbox to wait for other nodes which are busy to be freed.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DockerBuilderControl'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DockerBuilderNewTemplate'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Adds specified image configuration to all Docker Clouds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DockerBuilderPublisher'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Build step that sends a Dockerfile for building to docker host that used for this build run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DockerComposeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DockerPullImageBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dockerShell
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DoktorStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DotNetCoreRunner'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • downloadProgetPackage
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Downloads a universal ProGet package to specified folder and will optionally unpack it for you.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Download options are:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Package - Download ProGet universal package (ZIP file with extension of 'upack')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Content as ZIP - Download content as ZIP file
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Content as TGZ - Download content as TGZ file
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Unpack Content - Extract the package content once downloaded
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In all cases except 'Unpack Content' the environment variable PROGET_FILE will be populated with the name of the downloaded file

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            See Inedo documentation.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • crxDownload
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Download CRX Content Package files from a configured Adobe Granite repository into the workspace via the CRX Package Manager.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • googleStorageDownload
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DoxygenBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DrMemoryBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DropAllBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DrupalInstanceBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DrupalReviewBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Review code using the Coder Review module.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If your code base does not include Coder, then Coder will be downloaded automatically.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'DrupalTestsBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ECXCDMBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'EclipseBuckminsterBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • eggplantRunner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ElasticsearchQueryBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'EndAnalysisBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'EnvInjectBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'EnvPropagatorBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'EnvironmentManagerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'EnvironmentTagBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'EstimateBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • examTest_ExecutionFile
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For projects that use EXAM as the test system. This causes Jenkins to invoke EXAM with the given options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • examTest_Model
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For projects that use EXAM as the test system. This causes Jenkins to invoke EXAM with the given options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ExeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • executeCerberusCampaign
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ExecuteCommandAction'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • jobDsl
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ExecuteJobBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • execMan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ExecuteStepBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • executeTestsFromAlmOctane
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This build step is intended to support execution of automated tests from Micro Focus ALM Octane.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            There are several modes of execution :
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Mode Explanation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Execute suite runs in ALM Octane Execute suites according to specified suite IDs. New suite runs will be created and executed in ALM Octane. Jenkins job is finished after triggering the suite runs. The job does not wait until the suite runs are finished. This method is useful if you want to schedule suite execution in ALM Octane.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            By default, newly created suite runs will have name of suite and will be assigned to default release. In order to override this default behaviour, add following parameters (one or more) to job with your desired values:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • octane_release_id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • octane_new_suite_run_name
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Get tests from suites and trigger execution jobs Get tests from suites and trigger execution jobs : Get tests from specified suite IDs. (This method assumes that tests are assigned to test runner jobs from the current Jenkins.) Tests are send to execution by their assigned test runner jobs. The main job is finished after the test runner jobs are finished. This method is useful if you intend to add your job to the ALM Octane Pipeline module.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • executeCloudifyWorkflow
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This step executes a workflow on Cloudify Manager.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ExecutorBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • exportIpa
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • exportPackages
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Exports ECU-TEST packages and their attributes to a test management system like RQM or ALM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ExportParametersBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • exportProjects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Exports ECU-TEST projects and their attributes to a test management system like RQM or ALM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ExporterBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ExtensiveTestingBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • downloadFeatureFiles
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Downloads feature files from Zephyr Scale.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • featureManagementConfig
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'FeedStatus'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'FigletBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • fileOperations
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'FireLineBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'FitnesseBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'FixResultBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Set the build result (helps testing project configurations, notifications, promotions, upstream/downstream dependencies etc.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • flywayrunner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'FogbugzLinkBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • frugalTesting
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'FtpRenameBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'FuzzBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'FxCopBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GCloudSDKBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GCloudSDKWithAuthBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GatekeeperCommit'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GatekeeperMerge'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GatekeeperPush'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • gcrImageVulnerabilityScanner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • genexusb
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GenerateChangeScriptBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Generate an alter SQL script based on a previous schema compare build step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GenerateCreateScriptBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Generate a create SQL script from your repository, saved snapshot or database.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GenerateJenkinsReportBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Generate a HTML report based on a previous schema compare build step. This report is accessible via build detail within build history in Jenkins.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Warning: You can include only one Generate Jenkins HTML comparison report step per project.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GenerateStandaloneReportBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Generate a HTML report based on a previous schema compare build step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ghostInspector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • gitAutomerger
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • gitbisect
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • gitHubPRStatus
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GitHubSetCommitStatusBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GitStatusWrapperBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The gitStatusWrapper builder wraps set of job builders and handles PENDING/SUCCESS/FAILURE git statuses automatically

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Check documentation here

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GitToIspwPublish'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GnatmakeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • gprbuild
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This build step can be used to build GNAT project files by invoking GPRbuild.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • gradle
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • gradleForesight
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Groovy'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Executes a groovy script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GroovyRemoteBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • examRun_Groovy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For projects that use EXAM as the test system. This causes Jenkins to invoke EXAM with the given options.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • grypeScan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Allow usage of grype, a vulnerability scanner for container images and filesystems.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GsshCommandBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GsshFtpDownloadBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GsshFtpUploadBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'GsshShellBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'HOTPlayer'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The Heat Orchestration Template (HOT) player allows to play HOT file to OpenStack.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The HOT player load the HOT file choose in the selectbox and generate dynamically the inputs.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If the Associate Env File is configured than the selectbox permits to choose one file env file. By default when you choose a HOT file, the selectbox Associate Env File tries to select the same env file name if it exits or the default env file.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The inputs are divided in 3 categories :
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Properties
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Stack name : corresponding to the the name used in OpenStack
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Delete stack if already exists ? : if you want reuse the same name for a stack, the plugin destroys the stack if already exits.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Debug mode ? : if it's checked than the console print all the differents values parameters
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Tags
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Add tags: This category is for adding tags to the stacks. Input should be a string, multiple tags can be added separated by ","
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Parameters
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • This category is generated dynamically from the differents parameters present in the HOT.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Outputs
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • This category is generated dynamically from the differents outputs present in the HOT.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            You can use variable environment in each input. The variable must be start with "$" without "-".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • habitat
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • healthAnalyzer
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • nodePoolHold
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'HorreumExpect'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'HorreumUpload'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'HttpRequest'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • hugo
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'HyperBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ipythonBuilder
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ITest'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ImportFiles'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Imports one or more XML files into the CloudTest server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • importPackages
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Imports ECU-TEST packages and their attributes from a test management system like RQM or ALM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • importProjects
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Imports ECU-TEST projects and their attributes from an archive or a test management system like RQM or ALM.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'InfluxDBPublisher'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • influxDbQuery
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • insightAppSec
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • snInstallApp
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'InstallBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • snInstanceScan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'IqPolicyEvaluatorBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'IspwRestApiRequest'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'IssueFieldUpdateStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            JiraIssueFieldUpdater can be used to update custom Jira issue field.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'IssueUpdatesBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JBossBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JIRATicketEditor'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JIRAVersionEditor'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JSLintBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JabberBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • venafiCodeSignWithJarSigner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • venafiVerifyWithJarSigner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JbpmUrlResourceBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • SoapUIPro
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JigomergeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JiraEnvironmentVariableBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Extracts Jira information for the build to environment variables.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Available variables:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • JIRA_ISSUES - A comma separated list of issues which are referenced in the version control system changelog
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • JIRA_URL - Primary URL for the Jira server

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Typical usage:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            1. Add this build step
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            2. Use the "Progress Jira issues by workflow action" or "Move issues matching JQL to the specified version" with JQL like:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              issue in (${JIRA_ISSUES})

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JiraExtBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JiraIssueUpdateBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Performs a Jira workflow action for every issue that matches the JQL query. A common use might be to consider a ticket "confirmed" in the last build step of a job, or to mark an issue as "merged" if the job is used to merge changes from one SCM repository to another.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Optionally, include a comment that will be attached to those tickets that are modified as a result of this build step.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JiraReleaseVersionUpdaterBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JiraVersionCreatorBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JobConfigRebrander'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JobDeleteBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JobStrongAuthSimpleBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'JobcopyBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'KanboardTaskFetcher'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'KarafBuildStepBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • unlockMacOSKeychain
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'KlocworkBuildSpecBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Integration analysis (Full)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use the following steps to perform a Klocwork integration analysis and load the results to the Klocwork Server:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Klocwork - Step 1 (CI/Full) - Capture Build Information runs a Klocwork build specification generation tool to capture compilation information about the project Klocwork - Step 2 (Full) - Run Analysis runs the Klocwork Server analysis engine against the data captured within the build specification Klocwork - Step 3 (Full) - Load Analysis Results runs the Klocwork Server load tool, which imports analysis data into the Klocwork Server database

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Differential Analysis (CI)

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use the following steps to perform a differential analysis, which does not publish the results to the Klocwork Server and only reports the new issues detected since the previous integration analysis. Differential analysis can be used as a quality measure to reduce new issues being added to the Klocwork Server, and can also be configured to only analyze the changed files from the checkin, making the process much quicker:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Klocwork - Step 1 (CI/Full) - Capture Build Information runs a Klocwork build specification generation tool to capture compilation information about the project Klocwork - Step 2 (CI) - Run Differential Analysis runs an analysis only on the changed files by using the Klocwork command line user tool
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'KlocworkCiBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'KlocworkServerAnalysisBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'KlocworkServerLoadBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'KlocworkXSyncBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'KojiBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • cfyKubernetes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'KubernetesDeploy'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • kubernetesEngineDeploy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • loadcompletetest
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • leanIXMicroserviceIntelligence
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • lacework
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • eventSourceLambda
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • invokeLambda
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • publishLambda
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • deployLambda
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'LeapworkJenkinsBridgeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'LeiningenBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • checkETLicense

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Check ECU-TEST license.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Pipelines usage:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Signatures:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            checkETLicense(String toolName) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            checkETLicense('ECU-TEST')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • lighthouseReport
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dotnetListPackage
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The dotnet list package command provides a convenient option to list all NuGet package references for a specific project or a solution. You first need to build the project in order to have the assets needed for this command to process.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (see also: Microsoft Documentation)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'LoadImpactTestRunTask'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'LoadNinjaBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'LoadPluginBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • greet
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'LoadtestBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dotnetNuGetLocals
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The dotnet nuget locals command clears or lists local NuGet resources in the http-request cache, temporary cache, or machine-wide global packages folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (see also: Microsoft Documentation)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'LoginBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • mabl
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MailCommandBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             To recieve e-mail that CLI command is written, set properties.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            POP3 mail server address Set POP3 mail server's hostname or ip address.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            POP3 mail server port Set POP3 mail server's port. Default value is 110.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            POP3 User Name Set POP3 mail server's user account.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            POP3 Password Set POP3 mail server's password.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MakeAppTouchTestable'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Makes the specified project compatible with SOASTA TouchTest, by adding the TouchTest Driver library.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ManageInstance'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MatlabBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • maven
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Maven3Builder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MavenDeploymentDownloader'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This builder allows to download artifacts which where uploaded to a maven repository. The source project must have the 'Link to maven deployments' option enabled.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MavenSealightsBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • mavenSnapshotCheck
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MdtoolSolutionBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • measure
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • redmineMetricsReport
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MicroDocsChecker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • minio
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • minioDelete
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • minioDownload
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MobileStudioTestBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Jenkins plugin for execution of Progress Mobile Studio tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MockLoadBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Generates load on the Jenkins build node and over the remoting channel. There will be a random number of build artifacts created matching the file name pattern mock-artifact-*.txt. There will be a JUnit test report with the file name mock-junit.xml. Approximately 5% of the time, the build will "fail" its tests and thus no artifacts will be generated.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ModelBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MonitorRemoteJobBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MonkeyBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • moveComponents
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • msbuild
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MsBuildSQRunnerBegin'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MsBuildSQRunnerEnd'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MsTestBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MultiJobBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • mavenForesight
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'MystBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • NCScanBuilder
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NISConnection'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • npm
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • apiKey
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NSiqBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NantBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NeoBuildAction'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This build step executes a NeoLoad scenario and adds trend result graphs to the job page.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NerrvanaPlugin'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NetStormBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This build step can be used to invoke Netstorm tasks
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • neuvector
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NexusArtifactUploader'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NexusPublisherBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • nirmata
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For projects that use Nirmata as part of the build system. This causes Jenkins to invoke Nirmata Service with the given actions, following fields and options. Jenkins will mark the build as a failure if any issue is encountered.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • nodejsci
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NopmdCheckPublisher'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NotifyEventsBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NouvolaBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'NucleiBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OOBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For projects that use Operations Orchestration as an automation system. This causes Jenkins to invoke flows from a selected server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ostorlabScan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Oak9Builder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OctoperfBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • octopusPack
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • octopusPushBuildInformation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • octopusPushPackage
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • OneSky
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OntrackDSLStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OpenShiftBuildVerifier'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OpenShiftBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OpenShiftCreator'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OpenShiftDeleterJsonYaml'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OpenShiftDeleterLabels'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OpenShiftDeleterList'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OpenShiftDeployer'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OpenShiftDeploymentVerifier'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OpenShiftExec'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OpenShiftImageTagger'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OpenShiftScaler'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OpenShiftServiceVerifier'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'OrchestratorBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • cfyOutputsToInputs

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This step maps outputs and capabilities, of an environment created by Cloudify, into inputs of another deployment.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This step takes two inputs:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • A JSON file in the format generated by the "Build Cloudify Environment" ("outputs file"). For more information, refer to the tooltip of the "Outputs File" parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • A JSON file (or string) containing the mapping.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The format of the mapping JSON is as follows:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                "outputs": {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                	"<output_name>": "<input_name>",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                	"<output_name>": "<input_name>",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                	...
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                },
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                "capabilities": {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                	"<capability_name>": "<input_name>",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                	"<capability_name>": "<input_name>",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                	...
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            At the end, a file will be generated, containing a JSON compatible with Cloudify's standard "Deployment Inputs" structure, namely:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	"<input_name>": "<intput_value>",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	"<input_name>": "<intput_value>",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	...
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For example, if the "outputs file" is as follows:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	"outputs": {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            		"endpoint": "10.0.0.130",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            		"username": "centos"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	},
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	"capabilities": {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            		"public_key": "/tmp/public_key"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            And the mapping is as follows:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	"outputs": {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            		"username": "app_username"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	},
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	"capabilities": {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            		"public_key": "app_data"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	}
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Then the resultant inputs file will be as follows:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            {
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	"app_username": "centos",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	"app_data": "/tmp/public_key"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            	
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • oversecuredUpload
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dotnetPack
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The dotnet pack command builds the project and creates NuGet packages. The result of this command is a NuGet package (that is, a .nupkg file).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (see also: Microsoft Documentation)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • uTesterPageCountTask
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ParallelTestExecutor'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Given another job that runs tests, executes multiple runs of it concurrently by interleaving tests, achieving the parallel test execution semantics.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This builder can be used with any test job that (1) produce JUnit-compatible XML files, and (2) accept a test-exclusion list in a file. This builder looks at the test execution time from the last time, and divide tests into multiple units of roughly equal size. Each unit is then converted into the exclusion list (by excluding all but the tests that assigned to that unit), and the test job is triggered for each unit, with the exclusion file placed inside the workspace at your specified location.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Optionally, if your test job supports it, you may provide a test-inclusion file name. If defined, the plugin will generate inclusion lists for all parallel units but one which will still use exclusion list. This avoids new test cases from being included in all units on their first run. If you don't use an inclusion file, when a new test is added, the first build afterward will be executed in all the sub-builds, because it's not in the exclusion list on any of the units.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            You are responsible for configuring the build script in the test job to honor the exclusion and inclusion file. A standard technique is to write the build script to always refer to a fixed exclusion list file, and check in an empty file by that name to your SCM. You can then specify that file as the "exclusion file name" in the configuration of this builder, and the builder will overwrite the empty file from SCM by the generated one.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Similarly, you are responsible for checking "Execute concurrent builds if necessary" on the test job to allow the concurrent execution.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            At the end of the executions of the test job, the specified report directories are brought back into this job's workspace, then the standard JUnit test report collector will tally them.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ParameterPoolBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'PartialReleaseMgrSuccessfulBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • pcBuild
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • pcGitBuild
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The plugin allows to synchronize scripts from Git repository to Micro Focus LoadRunner Enterprise project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The plugin respects the subfolders structure defined in Git when synchronizing LoadRunner scripts to Performance Center 12.60 and above. For previous versions, all scripts will be uploaded to the same root folder in the Test Plan tree of the LoadRunner Enterprise project (scripts with duplicated named will be overwritten).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • pcRunBuild
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • peassOverview
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • activateDTConfiguration
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • createMemoryDump
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • startSession
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • stopSession
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • createThreadDump
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'PerformanceAnalysisBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • blazeMeterTest
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • bzt
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Execute Taurus with configuration files and options. You can simply specify JMX file to run, or give list of Taurus config files and options to execute.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'PhingBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'PipelineGenerationStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • plot
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'PolarisBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • fortiCWPScanner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'PortScannerStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This plugin performs, detects open ports and supported TLS ciphers and checks cipher strength via https://ciphersuite.info/.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • portshift_vulnerability_scanner
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'PowerShell'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'PowerShellBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'PreflightBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'PrereqBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • probelyScan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ProjectGenerationStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ProjectPrerequisitesInstaller'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • protecodesc
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ProxyBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dotnetPublish
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            dotnet publish compiles the application, reads through its dependencies specified in the project file, and publishes the resulting set of files to a directory. The output includes the following assets:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Intermediate Language (IL) code in an assembly with a dll extension.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • A .deps.json file that includes all of the dependencies of the project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • A .runtimeconfig.json file that specifies the shared runtime that the application expects, as well as other configuration options for the runtime (for example, garbage collection type).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • The application's dependencies, which are copied from the NuGet cache into the output folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The dotnet publish command's output is ready for deployment to a hosting system (for example, a server, PC, Mac, laptop) for execution. It's the only officially supported way to prepare the application for deployment. Depending on the type of deployment that the project specifies, the hosting system may or may not have the .NET Core shared runtime installed on it. For more information, see Publish .NET Core apps with the .NET Core CLI .
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (see also: Microsoft Documentation)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • snPublishApp
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • artifactVersion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'PublishBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • publishReport
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'PublishStepBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'PullRequestCommenter'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dotnetNuGetPush
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The dotnet nuget push command pushes a package to the server and publishes it. The push command uses server and credential details found in the system's NuGet config file or chain of config files. For more information on config files, see Configuring NuGet Behavior. NuGet's default configuration is obtained by loading %AppData%\NuGet\NuGet.config (Windows) or $HOME/.local/share (Linux/macOS), then loading any nuget.config or .nuget\nuget.config starting from the root of drive and ending in the current directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The command pushes an existing package. It doesn't create a package. To create a package, use dotnet pack.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (see also: Microsoft Documentation)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • artifactVersion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'PushBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Python'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Runs a Python script (defaults to python interpreter) for building the project. The script will be run with the workspace as the current directory.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'PythonBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • qualityCloudsScan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'QFTestConfigBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The QF-Test build step. Invokes QF-Test binary during your Jenkins job. If not listed in your PATH variable, the location of the QF-Test binary can be specified explicitly.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The actual test configuration is set via pairs of arguments and suite file fields. The Advanced Test result control button allows to adjust the mapping between the QF-Test result and the Jenkins build result.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            All report files that are produced will be stored in an output directory relative to your workspace, whose structure is as follows:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                <LOGDIR>
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    ├── html        (HTML report directory)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    ├── junit       (junit report directory)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    └── qrz         (QF-Test runlogs)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The resulting runlogs are automatically declared as Jenkins build artificats and should appear as such on the Jenkins build page. The junit and html reports can be processed further by the junit respectively the publishHTML plugin.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'QualityCenter'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • acrQuickTask
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'R'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Runs an R script (defaults to RScript interpreter) for building the project. The script will be run with the workspace as the current directory.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RAD'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For projects that need to use RAD's headless capabilities (or, even better, BU) as the build system. This causes Hudson to invoke RAD/BU with the given targets and options. Any non-zero exit code causes Hudson to mark the build as a failure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Hudson supplies some environment variables that can be used from within the build script.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            To know more about RAD's headless features, please refer to the RAD 7.0 Infocenter or to the RAD 7.5 Infocenter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RPDCreateInstance'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RPDDeployInstance'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RTCGitBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • rabbitMQPublisher
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This build step can be used to publish message to Rabbit-MQ.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RadarGunBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Rake'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RallyBuild'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • rancherRedeploy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • rancher
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ranorex
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RapidDeployJobPlanRunner'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RapidDeployJobRunner'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RapidDeployPackageBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RawCliBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RebaseBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This works in conjunction with the "This project builds a Subversion feature branch" checkbox above. This build step merges any revisions in the upstream branch, via svn merge, and commits them. This is normally called rebasing in Subversion. Automatic rebasing is useful to keep branches close to the upstream, thereby reducing the risk of integration problem down the road.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            You can rebase from the latest revision in the upstream branch, but you can also do safer rebase by choosing the permalink. For example, if you specify "last stable", then Jenkins will look for the last stable build, then rebase with the corresponding Subversion revision. Thus you know that you are rebasing to the known good state.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If you don't want Jenkins to automatically rebase, you can still use the "Rebase From Upstream" link from the left to manually initiate the rebase.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RebootIOSDevice'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Reboots tethered iOS devices. This can be used to restore devices to a "clean" state after running tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ReconfigureBox'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ReinstallBox'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ReleaseMarker'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • androidApkMove
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If you have already uploaded files to Google Play, whether manually, via the "Upload Android AAB/APK to Google Play" post-build action, or by other means, this build step allows you to change the release track for specific versions.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For example, you can use this to promote an app currently in alpha testing to the beta release track, once you've decided it's ready for a wider audience.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Similarly, once you're ready for release, you can move from beta to a staged rollout, or directly to production.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Note that "downgrading" release tracks, e.g. from production to alpha is not possible.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • addRelizaRelease
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RemoteBuildConfiguration'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • crxReplicate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Asynchronously replicate CRX Content Packages from one-or-more configured Adobe Granite repositories to wherever their replication agents may take them. This is probably not the most deterministic way to install packages on publish servers, so prefer using the "Deploy Content Packages" step if possible.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • acmRepoSync
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ReqtifyGenerateReport'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Creation of a report. The plugin will find a .rqtf file in the workspace and make a report. You can choose:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • The name of report
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • The model of report
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • The template of report
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RetrieveArtifactsBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • publishReview
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ReviewboardApplyPatch'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Should be used with Reviewboard Url Parameter and should be a pre-build step. If auto-apply patch is disabled in plugin configuration, this will invoke the default diff4j patch application. If auto-apply is on (default) - nothing will happen.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ReviewboardPollingBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RigorBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • snRollbackApp
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RollbackBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • snRollbackPlugin
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RqmBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RubyMotionBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RunApplicationAction'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • runFromAlmBuilder
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • runFromCodelessBuilder
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • runFromFSBuilder
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RunInCloudBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tpJobRun
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • osfBuilderSuiteForSFCCRunJob
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RunLoadRunnerScript'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RunMatlabCommandBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RunMatlabTestsBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RunPcTestBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • runPromotion
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • runTask
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tpTestRun
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RunTestSetBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • snRunTestSuite
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RunUftTestBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'RunscopeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • s3CopyArtifact
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SASUnitPlugInBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This is the Jenkins Plug-In for SASUnit the unit testing framework for SAS.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SBuild'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • scmSkip
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SConsBuilderCommand'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For projects that use SCons as the build system. This causes Jenkins to invoke SCons with the given targets, variables and options. Any non-zero exit code causes Hudson to mark the build as a failure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The command synopsis is scons [ options] [ name=val... ] [ targets]
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SConsBuilderScriptFile'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For projects that use SCons as the build system. This causes Jenkins to invoke SCons with the given targets, variables and options. Any non-zero exit code causes Hudson to mark the build as a failure.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The command synopsis is scons [ options] [ name=val... ] [ targets]
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            scons searches for a file named SConstruct, Sconstruct, or sconstruct (in that order) in the current directory and reads its configuration from the first file found.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SMABuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SQLPlusRunnerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SSHBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SaltAPIBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SbtPluginBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ScanBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ScriptBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ScriptBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SealightsCLIBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SecurityCheckerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SeleniumAutoExecBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SeleniumBuilderBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SelfServiceBookmarkBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SelfServiceContainerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SemanticVersioningBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SendMessageBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sensediaApiDeploy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sensediaApiJson
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sensediaApiQA
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • shell
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Runs a shell script (defaults to sh, but this is configurable) for building the project. The script will be run with the workspace as the current directory. Type in the contents of your shell script. If your shell script has no header line like #!/bin/sh —, then the shell configured system-wide will be used, but you can also use the header line to write script in another language (like #!/bin/perl) or control the options that shell uses.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            By default, the shell will be invoked with the "-ex" option. So all of the commands are printed before being executed, and the build is considered a failure if any of the commands exits with a non-zero exit code. Again, add the #!/bin/... line to change this behavior.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            As a best practice, try not to put a long shell script in here. Instead, consider adding the shell script in SCM and simply call that shell script from Jenkins (via bash -ex myscript.sh or something like that), so that you can track changes in your shell script.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SideeX'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sigma
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • signAndroidApks
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • venafiCodeSignWithSignTool
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • venafiVerifyWithSignTool
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SilkPerformerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • SimplifyQA
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SingleConditionalBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use run conditions to decide whether a builder should be run.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • skenai
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SkytapBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SmartFrogBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SnapshotBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SnykStepBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • addALMOctaneSonarQubeListener
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            See help information in ALM Octane Help Center
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SonarRunnerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SoosSCA'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SoundsBuildTask'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SparkNotifyBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Spark Notifier Plugin sends messages to spark spaces

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Make sure you add the correct bot or user to the spaces
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • split
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • springBoot
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sseBuild
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • stackrox
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • osfBuilderSuiteStandaloneSonarLinter
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'StartBox'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • startET

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Configure and start a preconfigured ECU-TEST installation.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Pipeline usage
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Signatures:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            startET(String toolName) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            startET(String toolName, String workspaceDir, String settingsDir, int timeout,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    boolean debugMode, boolean keepInstance, boolean updateUserLibs) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ETInstance.start() : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ETInstance.start(String workspaceDir, String settingsDir, int timeout,
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     boolean debugMode, boolean keepInstance, boolean updateUserLibs) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ETInstance.start(Map<String, Object> settings) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            startET('ECU-TEST')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            def instance = ET.installation('ECU-TEST')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            startET installation: instance.installation, workspaceDir: 'C:\\Data'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            def instance = ET.newInstallation('ECU-TEST', 'C:\\Program Files\\ECU-TEST 8.0')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            instance.start()
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            def instance = ET.newInstallation toolName: 'ECU-TEST', installPath: C:\\Program Files\\ECU-TEST 8.0'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            instance.start workspaceDir: 'C:\\Data', settingsDir: 'C:\\Data', timeout: 120, debugMode: true, keepInstance: false, updateUserLibs: true
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'StartGrid'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • acmStartPipeline
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'StartRSDB'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • startTS

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Configure and start Tool-Server.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Pipeline usage
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Signatures:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            startTS(String toolName) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            startTS(String toolName, String toolLibsIniPath, int tcpPort, int timeout, boolean keepInstance) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ETInstance.startTS() : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ETInstance.startTS(String toolLibsIniPath, int tcpPort, int timeout, boolean keepInstance) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ETInstance.startTS(Map<String, Object> settings) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            startTS('ECU-TEST')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            def instance = ET.installation('ECU-TEST')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            startTS installation: instance.installation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            def instance = ET.newInstallation('ECU-TEST', 'C:\\Program Files\\ECU-TEST 8.0')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            instance.startTS()
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            def instance = ET.newInstallation toolName: 'ECU-TEST', installPath: C:\\Program Files\\ECU-TEST 8.0'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            instance.startTS toolLibsIniPath: C:\\ToolLibs.ini, tcpPort: 5017, timeout: 60, keepInstance: false
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'StartTestEnvironment'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'StopBox'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • stopET

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Shutdown ECU-TEST.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Pipelines usage:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Signatures:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            stopET(String toolName) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            stopET(String toolName, int timeout) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ETInstance.stop() : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ETInstance.stop(int timeout) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ETInstance.stop(Map<String, Object> settings) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            stopET('ECU-TEST')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            def instance = ET.installation('ECU-TEST')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            stopET installation: instance.installation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            def instance = ET.newInstallation('ECU-TEST', 'C:\\Program Files\\ECU-TEST 8.0')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            instance.stop()
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            def instance = ET.newInstallation toolName: 'ECU-TEST', installPath: C:\\Program Files\\ECU-TEST 8.0'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            instance.stop timeout: 60
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'StopGrid'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'StopRSDB'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • stopTS

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Shutdown Tool-Server.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Pipelines usage:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Signatures:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            stopTS(String toolName) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            stopTS(String toolName, int timeout) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ETInstance.stopTS() : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ETInstance.stopTS(int timeout) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ETInstance.stopTS(Map<String, Object> settings) : void
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Examples:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            stopTS('ECU-TEST')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            def instance = ET.installation('ECU-TEST')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            stopTS installation: instance.installation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            def instance = ET.newInstallation('ECU-TEST', 'C:\\Program Files\\ECU-TEST 8.0')
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            instance.stopTS()
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            def instance = ET.newInstallation toolName: 'ECU-TEST', installPath: C:\\Program Files\\ECU-TEST 8.0'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            instance.stopTS timeout: 60
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'StopTestEnvironment'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • strobeMeasurement
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'StudioToolsBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • topazSubmitFreeFormJcl
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • topazSubmitJclMembers
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SvChangeModeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SvDeployBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SvExportBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SvUndeployBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • SWEAGLEExport
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • SWEAGLESnapshot
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • SWEAGLEUpload
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • SWEAGLEValidate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SyncBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SyncStepBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SysdigBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'SystemGroovy'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Executes a system groovy script similarly to hudson_url/script. The script is always executed on master.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Predefined variables:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            build
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The current AbstractBuild.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            launcher
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            A Launcher.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            listener
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            A BuildListener.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            out
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            A PrintStream (listener.logger).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TATestRunRegistrationBuildStep'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This step registers new test run with given category and sets the 'dtTestrunID' build variable.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • ted
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TagBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tanaguru
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TattletaleBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • testcompletetest
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TelegramBotBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TelerikAppBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • prismaIaC
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TerminateBox'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • cfyTerraform
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dotnetTest
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The dotnet test command is used to execute unit tests in a given solution. It builds the solution and runs a test host application for each test project in the solution. The test host executes tests in the given project using a test framework, for example: MSTest, NUnit, or xUnit, and reports the success or failure of each test. If all tests are successful, the test runner returns 0 as an exit code; otherwise if any test fails, it returns 1.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For multi-targeted projects, tests are run for each targeted framework. The test host and the unit test framework are packaged as NuGet packages and are restored as ordinary dependencies for the project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (see also: Microsoft Documentation)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TestBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TestCompositionRunner'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • testFolder
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Execute a test folder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TestLinkBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TestOdysseyBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • testPackage
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Execute a ECU-TEST package.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • testProject
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Execute a ECU-TEST project.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TestRunner'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TestStepBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TestStudioAPITestBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Jenkins plugin for execution of Progress Test Studio for API tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TestStudioTestBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Jenkins plugin for execution of Progress Test Studio tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TestSwarmBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • testweaver
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TesteinRunBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TesteinUploadStepBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TestingBotBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TestiniumPlugin'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TestopiaBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • convertTestsToRun
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This build step is intended to support execution of automated tests from Micro Focus ALM Octane.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The builder searches for the "testsToRun" parameter which is sent from ALM Octane as part of the execution framework.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Once it is found, its value is converted to the format of the selected testing framework, and injected to the "testsToRunConverted" environment parameter.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Later, the new parameter can be used in the appropriate execution builder.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • To use in parameter textboxes, use the following syntax: ${testsToRunConverted}

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • To use in the scripts, use the following syntax:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Linux shell: $testsToRunConverted
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Windows batch command: %testsToRunConverted%
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              • Pipeline script (workflow job): "${params.testsToRunConverted}"

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              See examples in the tables below:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Framework Linux shell
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Maven Surefire mvn clean -Dtest=$testsToRunConverted test
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Maven Failsafe mvn clean -Dit.test=$testsToRunConverted verify
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Gradle gradle test $testsToRunConverted
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Protractor protractor conf.js --grep="$testsToRunConverted"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Cucumber-JVM over Maven/
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              BDD Scenario
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              mvn clean -Dcucumber.options="$testsToRunConverted" test
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              JBehave over Maven mvn clean -Dfeatures="$testsToRunConverted" test

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Framework Windows batch command
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Maven Surefire mvn clean -Dtest=%testsToRunConverted% test
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Maven Failsafe mvn clean -Dit.test=%testsToRunConverted% verify
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Gradle gradle test %testsToRunConverted%
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Protractor protractor conf.js --grep="%testsToRunConverted%"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Cucumber-JVM over Maven/
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              BDD Scenario
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              mvn clean -Dcucumber.options="%testsToRunConverted%" test
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              JBehave over Maven mvn clean -Dfeatures="%testsToRunConverted%" test

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Framework Pipeline script
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Maven Surefire bat 'mvn clean -Dtest=${params.testsToRunConverted} test'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Maven Failsafe bat 'mvn clean -Dit.test=${params.testsToRunConverted} verify'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Gradle bat 'gradle test ${params.testsToRunConverted}'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Protractor bat(/protractor conf.js --grep="${params.testsToRunConverted}"/)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              Cucumber-JVM over Maven/
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              BDD Scenario
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              bat(/mvn clean -Dcucumber.options="${params.testsToRunConverted}" test/)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              JBehave over Maven bat(/mvn clean -Dfeatures="${testsToRunConverted}" test/)


                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Notes/Limitations :
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • UFT: In order to build a UFT MTBX file, this builder needs to know the test check-out directory. By default this is the job workspace directory. If tests are checked out in another directory, define in the job a String parameter "testsToRunCheckoutDirectory" with the correct directory.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • JUnit/TestNG: Supported for JUnit 4.7+, Surefire Plugin 2.19+, Failsafe Plugin 2.12.1+.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Cucumber-JVM over Maven: If your project contains several run classes, specify a run class that will be used, otherwise all run classes will be executed by Cucumber. You can specify test runner by adding: '-Dtest=[runner class name]' to the Maven command
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • JBehave over Maven: read more about integration with JBehave here


                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            See more help information in ALM Octane Help Center
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TestsigmaExecutionBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TicsAnalyzer'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • runTics
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • totaltestUT
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • totaltest
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ToxBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tptExecute
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The "Execute TPT test cases" build step can run in two modes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Just execute the tests within this Job. The given values will be used to create a command that will be executed. This command could be typed into the command line and would work.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Use this Job as a Master. In this mode the TPT RMI API is used to read the test cases that must be executed. For every test case a slave job is started and parameters are provided that can be used by the "Execute TPT tests slave" build step. The slaves copy their reults back to the master and the master will aggregate the test results.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The master mode can be activated and configured by clicking on the "Advanced" button.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tptAgent
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This build step expects to be executed in a job started by an "Execute TPT test cases" build step in master mode. The master job will provide some parameters used by this build step. It will execute excatly one test case and copies the result back to the master node. To execute a single test case the build step uses the TPT RMI API. The Job should be only run once on every Computer. You can achive that e.g. by Throttle Concurrent Builds Plugin
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tricentisCI
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TriggerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'TwitterPublisher'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • UiPathAssets
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • UiPathPack
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UnicornValidationBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UninstallBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Unity3dBuilder'

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            For projects that use Unity3d as the build system.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This causes Jenkins to invoke the Unity3d Editor with the given command line arguments.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            A non-zero exit code from Unity3d makes Jenkins mark the build as a failure.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • unshelve
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tpAppUpdateFile
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tpAppUpdateURL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UpdateBox'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tpDataSourceUpdate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • azureVMSSUpdateInstances
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UpdatePriority'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UpdateProjectBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tpProjectParamUpdate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UpdateReleaseStage'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UpdateStatus'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • tpTestPackageUpdate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • updraftPublish
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UploadAppBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UploadAppBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • uploadCloudifyBlueprint

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use this step to upload a blueprint to Cloudify Manager.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Two paramters are mandatory:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Blueprint ID
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Main blueprint file name

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In addition, exactly one of the following parameters is mandatory:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Blueprint archive path
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Blueprint archive URL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Blueprint's root directory

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If you provide a blueprint's root directory, then the entire directory contents are packaged into a blueprint archive.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UploadBuild'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • upload-pgyer-v2

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            click to get the documents

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UploadDeployment'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UploadJUnitTestResult'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UploadMetricsFile'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • uploadProgetPackage
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Creates and uploads a universal ProGet package to your ProGet server.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • uploadCloudifyBlueprint
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use this step to upload a plugin to Cloudify Manager.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'UpmergeBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • uTesterUrlListTask
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • useMango
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • vb6
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • vCommander
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VMGRAPI'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • apiType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dynamicUserId : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need in dynamically selecting the user name per job, the pre-job should place into the workspace directory a file with single line that contains the userid to be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The file name should be: ${BUILD_NUMBER}.${BUILD_ID}.user.input"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The job will pick the userid which is in the file, and connect to vAPI using this userid and the vAPI secret key.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • apiUrl : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This is the acctual URL of the API
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • /severe_messages /count
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • /severe_messages /get
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • /sessions /count
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • /sessions /launch
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • /sessions /get
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • /runs /compact
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • /runs /update

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Please see the full API list at http://[vAPI HOST]:[vAPI PORT]/vmgr/rest/$docs

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please note that the output of the API call will get saved as jSON format into the workspace at ${BUILD_NUMBER}.${BUILD_ID}.vapi.output
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • requestMethod : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • advConfig : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • connTimeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Connection Timeout is the time (in minutes) for the Jenkins executor to wait till it establish a connection with the vManager server. It is usually very fast, so no need to change the default (1 minute).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Setting the time to 0 means an unlimited time. In case it is taking too long to establish a connection, and the time passed is more than the Connection Timeout set, the connection to the vManager server will be closed, and the Jenkins executor will be able to continue. The vAPI operation will fail (it will not start), and the build will be marked as failed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If no Connection timeout is set, the default is 1 minutes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • readTimeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Read Timeout is the time (in minutes) for the Jenkins executor to wait for vManager server to end the current operation. In heavy operations such as collect compact or ranking, the time to response back can vary, and might even take an hour or so depends on the load the vManager server is experiencing.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Setting the time to 0 means an unlimited time. In case the vAPI call is taking too long, and is more than the Read Timeout set, the connection to the vManager server will be closed, and the Jenkins executor will be able to continue. The vAPI operation will not fail, but the build will be marked as failed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If no Read timeout is set, the default is 30 minutes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VMGRLaunch'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • deleteInputFile : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • deleteCredentialInputFile : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • useUserOnFarm : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • authRequired : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            vManager vAPI can operate in one of two modes:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Secured by user/secret key
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Open
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • In case of a secure mode, the userId (vAPI User) will be shown as the user who perform the operation within vManager tool.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of open mode, the default userid that will be used is "vapi".
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • vsifType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • userFarmType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dynamicUserId : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need in dynamically selecting the user name per job, the pre-job should place into the workspace directory a file with single line that contains the userid to be used.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The file name should be: ${BUILD_NUMBER}.${BUILD_ID}.user.input"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The job will pick the userid which is in the file, and connect to vAPI using this userid and the vAPI secret key.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • advConfig : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • connTimeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Connection Timeout is the time (in minutes) for the Jenkins executor to wait till it establish a connection with the vManager server. It is usually very fast, so no need to change the default (1 minute).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Setting the time to 0 means an unlimited time. In case it is taking too long to establish a connection, and the time passed is more than the Connection Timeout set, the connection to the vManager server will be closed, and the Jenkins executor will be able to continue. The vAPI operation will fail (it will not start), and the build will be marked as failed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If no Connection timeout is set, the default is 1 minutes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • readTimeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Read Timeout is the time (in minutes) for the Jenkins executor to wait for vManager server to end the current operation. In heavy operations such as collect compact or ranking, the time to response back can vary, and might even take an hour or so depends on the load the vManager server is experiencing.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Setting the time to 0 means an unlimited time. In case the vAPI call is taking too long, and is more than the Read Timeout set, the connection to the vManager server will be closed, and the Jenkins executor will be able to continue. The vAPI operation will not fail, but the build will be marked as failed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            If no Read timeout is set, the default is 30 minutes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • envVarible : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • envVaribleFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Supported by vManager 15.1 and above only
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need in adding the vsif environment variables, the pre-job should place into the workspace directory a file with a list of relevant environment variables in json keys format.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "MY_REGRESSION_AREA": "/home/dan/regression",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "MY_DUT" : "top"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (Note the comma separator at the end of each line, to exclude the last line.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The input file should be place into the working directory. In case this field is empty, The file name need to be: ${BUILD_NUMBER}.${BUILD_ID}.environment.input
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please fill this field only in case, you want to hard code the input file name, to be consist across all builds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • inaccessibleResolver : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The following setup allow you to select how the build will behave in each of the state where the session stop from running.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Continue
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case you select to continue, the build will assume (on the chosen state) for a given session that it can continue and finish the wait on this specific session.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please note that in case there are multiple sessions that are being executed by this step, the build will wait till all sessions got into a state that allow it to continue.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Ignore
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case you select to continue, the build will assume (on the chosen state) for a given session that it can ignore the chosen state and keep waiting for other state (until get the 'completed' state).

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Fail
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case you select to fail, the build will assume (on the chosen state) for a given session that it should mark this build as a failure build. Note: If you have multiple sessions on this build step, it is enough for one single session to be marked as 'failed' in order to mark the entire build as a failed build.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Other Waiting Considerations
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            1. When all sessions on this build step are having the state 'completed' the build will be marked as success.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            2. When the vManager server goes down, the build step will keep waiting till the server will go back up. The build step will only change its state based on sessions state changes.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            3. If the session was manually deleted on the vManager server, before reaching into final state, the build will be marked as a failure build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            4. In any case, if the number of minutes waiting is bigger than the timeout set here, the build will marked as a failed build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • stoppedResolver : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • failedResolver : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • doneResolver : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • suspendedResolver : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • waitTillSessionEnds : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • stepSessionTimeout : int
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • generateJUnitXML : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • extraAttributesForFailures : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • staticAttributeList : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • markBuildAsFailedIfAllRunFailed : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • failJobIfAllRunFailed : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • envSourceInputFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Supported by vManager 17.10 and above only
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need in adding environment variables per user for the regression time post vsif parsing stage, users can create a list of aliases and store them within a file. The job will 'source' that file prior of reading the vsif.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Note that this can also serve for any pre stage execution, not just for aliases.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Relative path is also supported (aka ~/doSomething.sh).
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Script must be in bash or csh.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The file should be place into a directory with a read permission for the user who launches the regression.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case this field is empty, this field is ignored
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • vMGRBuildArchive : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • deleteAlsoSessionDirectory : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Choosing to delete vManager session during build removal, will trigger an operation during manual/automatic deletion of a build, to deal with the remote session/sessions that were created during that build on the vManager DB.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            When this option is enabled the build will place an instruction file (sdi.properties) within the job directory that specify the sessions to get deleted, as well as other parameters - that will be used during the delete operation.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Builds that runs while this option is turned off, will not get effected during removal, and will keep their sessions.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            You can choose between two methodologies:

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Sync Delete Methodology (built-in)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case you select the sync methodology, the plugin will call vManager vAPI during the build removal process for deleting the sessions that were created during that same build.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            With this option you can also supply a generic user/password to be used for the delete operation, otherwise, the same user that was used during the build will be picked automatically.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please note that the sync methodology is lacking two main aspects:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            1. Since Jenkins ignores any exception thrown within the callback functions of RunListener, the build will get deleted even if the session failed to get deleted from vManager DB.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            2. When the vAPI is down, it can take up to 20 seconds to finish the operation (as it needs to wait till vAPI will be available) - the UX at that time, might appear sluggish to the end user.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Async Delete Methodology (externally)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case you want to introduce a more robust approach (promise session deletion even if vManager Server is down, as well as faster UX), you should use the async methodology.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            When Async Methodology is used, the callback function will not try to delete the session, but instead will copy the sdi.properties file into an external location of your choice.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            You should create an additional job, one that is triggered every 1 minute for scanning that directory (and trying to delete the relevant sessions within these sdi files). To exclude the copy of the sdi files during build removal, this flow is not managed by the plugin.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please note - defining an external directory location (in windows) requires the use of forward slash instead of backslash.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • genericCredentialForSessionDelete : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • archiveUser : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • archivePassword : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • famMode : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • famModeLocation : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • noAppendSeed : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • markBuildAsPassedIfAllRunPassed : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • failJobUnlessAllRunPassed : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • userPrivateSSHKey : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attrValues : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attrValuesFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Supported by vManager 17.1 and above only
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need in setting the vsif attribute values, the pre-job should place into the workspace directory a file with a list of relevant attributes and their values (one line per each attribute) in the following format.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Line 1: attribute_name,attribute_value,attribute_type
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Line 2: attribute_name,attribute_value,attribute_type

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            attribute type can be 1 of 3:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            P_SESSION for session type attributes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            P_TEST for test type attributes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            P_GROUP for group type attributes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            home_location,/home/dan/regression,P_SESSION
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            owner,dan,P_TEST
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (Note the comma separator within the lines. Do not place comma at the end of the lines.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The input file should be place into the working directory. In case this field is empty, The file name need to be: ${BUILD_NUMBER}.${BUILD_ID}.attr.values.input
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please fill this field only in case, you want to hard code the input file name, to be consist across all builds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • executionType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • sessionsInputFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This option is useful for those who wish to take benefit of their own environment and scripts for launching sessions using batch, but still want the benefit of having the Job waiting for the execution to end, generates JUnit report, produce triage link, real time view of the run's progress, summary report, etc'.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This option is also useful for those who wish to take advantage of this plugin, but are not using the vManager Runner, and uses "collect" mode instead. For such flow they can still benefit from generated JUnit report, triage link, real time view of the run's progress, summary report, etc'.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In this option, there is an assumption that a pre-step (usually from shell type) is taking over the session launch operation (or collect), and as such, in order for this plugin to continue monitoring those sessions - the session names need to be exchange between the shell step and this step.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need to launch the sessions using batch as a pre-step to this one (or collect), the pre-step should place into the workspace directory a file with the session or session names that were launched/collected - new line for each session name.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The input file should be place into the working directory. In case this field is empty, The file name need to be: ${BUILD_NUMBER}.${BUILD_ID}.sessions.input
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please fill this field only in case, you want to hard code the input file name, to be consist across all builds.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            the vManager plugin will look for any of the input files mentioned above, and query the server for their respective id automatically. From that point and on, the flow continues as if the sessions were launched/collected by this plugin.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The output of all IDs of the launched/collected sessions can be found at: ${BUILD_NUMBER}.${BUILD_ID}.session_launch.output
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • deleteSessionInputFile : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • envVariableType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • envVariableText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Supported by vManager 15.1 and above only
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need in adding the vsif environment variables, you can supply here a list of relevant environment variables in json keys format.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "MY_REGRESSION_AREA": "/home/dan/regression",
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            "MY_DUT" : "top"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (Note the comma separator at the end of each line, to exclude the last line.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attrVariableType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • attrVariableText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Supported by vManager 17.1 and above only
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need in setting the vsif attribute values, you can use this text area for giving a list of relevant attributes and their values (one line per each attribute) in the following format.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Line 1: attribute_name,attribute_value,attribute_type
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Line 2: attribute_name,attribute_value,attribute_type

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            attribute type can be 1 of 3:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            P_SESSION for session type attributes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            P_TEST for test type attributes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            P_GROUP for group type attributes
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            home_location,/home/dan/regression,P_SESSION
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            owner,dan,P_TEST
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (Note the comma separator within the lines. Do not place comma at the end of the lines.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • pauseSessionOnBuildInterruption : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • envSourceInputFileType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • executionScript : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Start your session from shell using batch, and continue monitoring from vAPI
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case you need to launch your session using batch first, please create a wrapper script that gets as an input the vSIF full path.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The plugin will execute your script on the selective agent (Jenkins) and will extract the session name out of it.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The plugin will then use that session_name to keep monitor your execution.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Example for such script file can be:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ---------------------------
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            #!/bin/csh

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            source ~/.cshrc

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            setenv VMGR_REGION default
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            setenv VMGR_REGION_ROUTE_POLICY LOCAL
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            setenv VMGR_USER some_user_id
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            setenv VMGR_PASSWORD XXXXXX

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            vmanager -execcmd "launch $1"
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            ---------------------------

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please also make sure that
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            1) The path to the script is a full path. No shortcuts or relative paths are allowed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            2) The shell type (bash, csh, sh) is supplied with full path as well.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            3) This mode can only be used with an Agent that runs on Linux.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • executionShellLocation : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • executionVsifFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • defineVaribleFile : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need in setting the vsif define values, the pre-job should place into the workspace directory a file with a list of relevant defines and their values (one line per each definition) in the following format.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Line 1: define_name,define_value
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Line 2: define_name,define_value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            REG_MODE,sanity
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            SESSION_NAME,my_session
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (Note the comma separator within the lines. Do not place comma at the end of the lines.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The input file should be place into the working directory. In case this field is empty, The file name need to be: ${BUILD_NUMBER}.${BUILD_ID}.define.input
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please fill this field only in case, you want to hard code the input file name, to be consist across all builds.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • defineVarible : boolean
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • defineVariableType : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • defineVariableText : String
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            In case of a need in setting the vsif define values, you can use this text area for giving a list of relevant defines and their values (one line per each attribute) in the following format.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Line 1: define_name,define_value
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Line 2: define_name,define_value

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Example:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            REG_MODE,sanity
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            SESSION_NAME,my_session
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (Note the comma separator within the lines. Do not place comma at the end of the lines.)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VSphereBuildStepContainer'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VaddyPlugin'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VagrantDestroyCommand'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VagrantProvisionCommand'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VagrantSshCommand'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VagrantUpCommand'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ValgrindBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • crxValidate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Validate that content packages in the workspace conform to restrictions on the scope of their WorkspaceFilter and on the types of embedded files. Use this to enforce security policies to prevent developers from deploying content or code through continuous integration.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Only package files with .zip or .jar extensions will be identified and deployed.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'Validator'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • contentReplace
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VectorCASTCommand'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VectorCASTSetup'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ViberNotifier'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ViewCloner'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VirtualenvBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • visualexpert
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Visual Expert builder facilitates to Analyze Project, Generate Reference Documentation and Generate Code Review Documentation for Visual Expert Projects.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'VsCodeMetricsBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • vsTest
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WASBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • greet
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WakeUpIOSDevice'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Wakes up tethered iOS devices, and automatically opens Mobile Safari to the most recent URL. This can be used to "prep" devices before running tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WallarmFastBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WarriorPluginBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • wattspeed
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WebLoadAnalyticsBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WebLoadConsoleBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WildflyBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WinBatchBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WinDocksBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • winRMClient
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WixToolsetBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'WsapBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • xcodeBuild
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'XFramiumBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'XLRVarSetterBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • osfBuilderSuiteXMLLint
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'XShellBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'XrayExportBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'XrayImportFeatureBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            This Build Step can be used to import existing Cucumber Tests into Xray Tests.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • yarn
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ZAPBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • zAdviserDownload
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • zAdviserUpload
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ZOSJobSubmitter'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ZanataCliBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Experimental feature - this is experimental and subject to change without notice.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ZanataSyncStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Use this build step to perform standard Zanata push and pull. If you need to use advanced Zanata CLI options, Jenkins admin can configure Zanata CLI installation under global tools. Then select the installation in the job configuration. You can then use it in shell.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'ZapRunner'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • zulipSend
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • cfyCloudFormation
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.alauda.jenkins.plugins.freestyle.CreateStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.alauda.jenkins.plugins.freestyle.DeleteStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.alauda.jenkins.plugins.freestyle.RawStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.alauda.jenkins.plugins.freestyle.WatchStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.cloudbees.dockerpublish.DockerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Build and push your Docker based project to the Docker registry. Builds the Dockerfile present in the workspace root or in the directory specified and pushes it to the Docker registry.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.cloudbees.plugins.deployer.DeployBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.etas.jenkins.plugins.CreateTextFile.CreateFileBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.groupon.jenkinsci.plugins.DotCiFigtemplate.HelloWorldBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • azureVMSSUpdate
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.openshift.jenkins.plugins.freestyle.CreateStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.openshift.jenkins.plugins.freestyle.DeleteStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.openshift.jenkins.plugins.freestyle.RawStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.openshift.jenkins.plugins.freestyle.WatchStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.syncapse.jenkinsci.plugins.awscloudformationwrapper.CloudFormationBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'com.synopsys.integration.jenkins.coverity.extensions.buildstep.CoverityBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • vdooScan
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'iOSAppInstaller'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Silently installs the specified iOS app (.ipa file) on tethered iOS devices.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'iOSSimulatorLauncher'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dotnetRestore
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The dotnet restore command uses NuGet to restore dependencies as well as project-specific tools that are specified in the project file. In most cases, you don't need to explicitly use the dotnet restore command, since a NuGet restore is run implicitly if necessary when you run the following commands:
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Sometimes, it might be inconvenient to run the implicit NuGet restore with these commands. For example, some automated systems, such as build systems, need to call dotnet restore explicitly to control when the restore occurs so that they can control network usage. To prevent the implicit NuGet restore, you can use the --no-restore flag with any of these commands to disable implicit restore.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (see also: Microsoft Documentation)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • dotnetToolRestore
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The dotnet tool restore command finds the tool manifest file that is in scope for the current directory and installs the tools that are listed in it. For information about manifest files, see Install a local tool and Invoke a local tool.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            (see also: Microsoft Documentation)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'io.jenkins.plugins.immuniweb.ScannerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • upload-sonic
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'jenkins.plugins.coverity.CoverityBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            How to configure the Coverity Build Step

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            The build step can be configured as any other build steps. Choose the appropriate builder and configure the command to be performed. The configured build step will be wrapped with the Coverity cov-build executables so that it captures the build and can be used to further analysis by using coverity static tools. This build step is only for capturing build of compiled sources.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'org.jenkinsci.plugins.dockerbuildstep.DockerBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'org.jenkinsci.plugins.ios.connector.DeployBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Deploy iOS aplications to any iOS devices USB-tethered in any of the Jenkins slaves.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'org.jenkinsci.plugins.liquibase.builder.UpdateBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • osfBuilderSuiteForSFCCDeploy
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • greet
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'org.quality.gates.jenkins.plugin.QGBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Quality Gates Plugin will fail the build whenever the Quality Gates criteria in the Sonar analysis aren't met
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • (the project Quality Gates status is different than "Passed")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'quality.gates.jenkins.plugin.QGBuilder'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • Quality Gates Plugin will fail the build whenever the Quality Gates criteria in the Sonar analysis aren't met
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            • (the project Quality Gates status is different than "Passed")
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • upload-pgyer

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            click to get the documents

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'vRABlueprintBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • $class: 'vRADeploymentBuildStep'
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • buildContent : String

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          • Was this page helpful?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Please submit your feedback about this page through this quick form.

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Alternatively, if you don't wish to complete the quick form, you can simply indicate if you found this page helpful?

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                


                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            See existing feedback here.